KERNEL SELFTESTS: linux_headers_dir is /usr/src/linux-headers-x86_64-rhel-8.3-kselftests-fcbc96276c22a1d146eaac0cff24b8149c2d967a '/usr/sbin/iptables' -> '/usr/sbin/iptables-nft' '/usr/sbin/iptables-restore' -> '/usr/sbin/iptables-nft-restore' '/usr/sbin/iptables-save' -> '/usr/sbin/iptables-nft-save' '/usr/sbin/ip6tables' -> '/usr/sbin/ip6tables-nft' '/usr/sbin/ip6tables-restore' -> '/usr/sbin/ip6tables-nft-restore' '/usr/sbin/ip6tables-save' -> '/usr/sbin/ip6tables-nft-save' 2024-08-22 01:08:00 sed -i s/default_timeout=45/default_timeout=300/ kselftest/runner.sh 2024-08-22 01:08:00 make -j36 -C membarrier make: Entering directory '/usr/src/perf_selftests-x86_64-rhel-8.3-kselftests-fcbc96276c22a1d146eaac0cff24b8149c2d967a/tools/testing/selftests/membarrier' CC membarrier_test_single_thread CC membarrier_test_multi_thread make: Leaving directory '/usr/src/perf_selftests-x86_64-rhel-8.3-kselftests-fcbc96276c22a1d146eaac0cff24b8149c2d967a/tools/testing/selftests/membarrier' 2024-08-22 01:08:00 make quicktest=1 run_tests -C membarrier make: Entering directory '/usr/src/perf_selftests-x86_64-rhel-8.3-kselftests-fcbc96276c22a1d146eaac0cff24b8149c2d967a/tools/testing/selftests/membarrier' TAP version 13 1..2 # timeout set to 300 # selftests: membarrier: membarrier_test_single_thread # TAP version 13 # 1..18 # ok 1 sys membarrier MEMBARRIER_CMD_GET_REGISTRATIONS test: flags = 0, ret = 0, registrations = 0 # ok 2 sys_membarrier available # ok 3 sys membarrier invalid command test: command = -1, flags = 0, errno = 22. Failed as expected # ok 4 sys membarrier MEMBARRIER_CMD_QUERY invalid flags test: flags = 1, errno = 22. Failed as expected # ok 5 sys membarrier MEMBARRIER_CMD_PRIVATE_EXPEDITED not registered failure test: flags = 0, errno = 1 # ok 6 sys membarrier MEMBARRIER_CMD_PRIVATE_EXPEDITED_SYNC_CORE not registered failure test: flags = 0, errno = 1 # ok 7 sys membarrier MEMBARRIER_CMD_GLOBAL test: flags = 0 # ok 8 sys membarrier MEMBARRIER_CMD_REGISTER_PRIVATE_EXPEDITED test: flags = 0 # ok 9 sys membarrier MEMBARRIER_CMD_GET_REGISTRATIONS test: flags = 0, ret = 16, registrations = 16 # ok 10 sys membarrier MEMBARRIER_CMD_PRIVATE_EXPEDITED test: flags = 0 # ok 11 sys membarrier MEMBARRIER_CMD_REGISTER_PRIVATE_EXPEDITED_SYNC_CORE test: flags = 0 # ok 12 sys membarrier MEMBARRIER_CMD_GET_REGISTRATIONS test: flags = 0, ret = 80, registrations = 80 # ok 13 sys membarrier MEMBARRIER_CMD_PRIVATE_EXPEDITED_SYNC_CORE test: flags = 0 # ok 14 sys membarrier MEMBARRIER_CMD_GLOBAL_EXPEDITED test: flags = 0 # ok 15 sys membarrier MEMBARRIER_CMD_REGISTER_GLOBAL_EXPEDITED test: flags = 0 # ok 16 sys membarrier MEMBARRIER_CMD_GET_REGISTRATIONS test: flags = 0, ret = 84, registrations = 84 # ok 17 sys membarrier MEMBARRIER_CMD_GLOBAL_EXPEDITED test: flags = 0 # ok 18 sys membarrier MEMBARRIER_CMD_GET_REGISTRATIONS test: flags = 0, ret = 84, registrations = 84 # # Totals: pass:18 fail:0 xfail:0 xpass:0 skip:0 error:0 ok 1 selftests: membarrier: membarrier_test_single_thread # timeout set to 300 # selftests: membarrier: membarrier_test_multi_thread # TAP version 13 # 1..16 # ok 1 sys_membarrier available # ok 2 sys membarrier invalid command test: command = -1, flags = 0, errno = 22. Failed as expected # ok 3 sys membarrier MEMBARRIER_CMD_QUERY invalid flags test: flags = 1, errno = 22. Failed as expected # ok 4 sys membarrier MEMBARRIER_CMD_PRIVATE_EXPEDITED not registered failure test: flags = 0, errno = 1 # ok 5 sys membarrier MEMBARRIER_CMD_PRIVATE_EXPEDITED_SYNC_CORE not registered failure test: flags = 0, errno = 1 # ok 6 sys membarrier MEMBARRIER_CMD_GLOBAL test: flags = 0 # ok 7 sys membarrier MEMBARRIER_CMD_REGISTER_PRIVATE_EXPEDITED test: flags = 0 # ok 8 sys membarrier MEMBARRIER_CMD_GET_REGISTRATIONS test: flags = 0, ret = 16, registrations = 16 # ok 9 sys membarrier MEMBARRIER_CMD_PRIVATE_EXPEDITED test: flags = 0 # ok 10 sys membarrier MEMBARRIER_CMD_REGISTER_PRIVATE_EXPEDITED_SYNC_CORE test: flags = 0 # ok 11 sys membarrier MEMBARRIER_CMD_GET_REGISTRATIONS test: flags = 0, ret = 80, registrations = 80 # ok 12 sys membarrier MEMBARRIER_CMD_PRIVATE_EXPEDITED_SYNC_CORE test: flags = 0 # ok 13 sys membarrier MEMBARRIER_CMD_GLOBAL_EXPEDITED test: flags = 0 # ok 14 sys membarrier MEMBARRIER_CMD_REGISTER_GLOBAL_EXPEDITED test: flags = 0 # ok 15 sys membarrier MEMBARRIER_CMD_GET_REGISTRATIONS test: flags = 0, ret = 84, registrations = 84 # ok 16 sys membarrier MEMBARRIER_CMD_GLOBAL_EXPEDITED test: flags = 0 # # Totals: pass:16 fail:0 xfail:0 xpass:0 skip:0 error:0 ok 2 selftests: membarrier: membarrier_test_multi_thread make: Leaving directory '/usr/src/perf_selftests-x86_64-rhel-8.3-kselftests-fcbc96276c22a1d146eaac0cff24b8149c2d967a/tools/testing/selftests/membarrier' 2024-08-22 01:08:01 make -j36 -C memfd make: Entering directory '/usr/src/perf_selftests-x86_64-rhel-8.3-kselftests-fcbc96276c22a1d146eaac0cff24b8149c2d967a/tools/testing/selftests/memfd' CC memfd_test CC fuse_test CC fuse_mnt make: Leaving directory '/usr/src/perf_selftests-x86_64-rhel-8.3-kselftests-fcbc96276c22a1d146eaac0cff24b8149c2d967a/tools/testing/selftests/memfd' 2024-08-22 01:08:01 make quicktest=1 run_tests -C memfd make: Entering directory '/usr/src/perf_selftests-x86_64-rhel-8.3-kselftests-fcbc96276c22a1d146eaac0cff24b8149c2d967a/tools/testing/selftests/memfd' TAP version 13 1..3 # timeout set to 300 # selftests: memfd: memfd_test # memfd: CREATE # memfd: BASIC # memfd: SEAL-EXEC # memfd: Apply SEAL_EXEC # memfd: Apply ALL_SEALS # memfd: EXEC_NO_SEAL # memfd: NOEXEC_SEAL # memfd: SEAL-WRITE # memfd: SEAL-FUTURE-WRITE # memfd: SEAL-SHRINK # memfd: SEAL-GROW # memfd: SEAL-RESIZE # memfd: sysctl 0 # memfd: sysctl 1 # memfd: sysctl 0 # memfd: sysctl 2 # memfd: sysctl 1 # memfd: sysctl 0 # memfd: nested sysctl 0 # memfd: sysctl 0 # memfd: sysctl 1 # memfd: sysctl 0 # memfd: sysctl 2 # memfd: sysctl 1 # memfd: sysctl 0 # memfd: nested sysctl 1 # memfd: nested sysctl 2 # memfd: nested sysctl 0 -> 1 after fork # memfd: nested sysctl 0 -> 2 after fork # memfd: nested sysctl 2 -> 1 after fork # memfd: nested sysctl 2 -> 0 after fork # memfd: nested sysctl 1 -> 0 after fork # memfd: SHARE-DUP # memfd: SHARE-MMAP # memfd: SHARE-OPEN # memfd: SHARE-FORK # memfd: SHARE-DUP (shared file-table) # memfd: SHARE-MMAP (shared file-table) # memfd: SHARE-OPEN (shared file-table) # memfd: SHARE-FORK (shared file-table) # memfd: DONE ok 1 selftests: memfd: memfd_test # timeout set to 300 # selftests: memfd: run_fuse_test.sh # opening: ./mnt/memfd # fuse: DONE ok 2 selftests: memfd: run_fuse_test.sh # timeout set to 300 # selftests: memfd: run_hugetlbfs_test.sh # memfd-hugetlb: CREATE # memfd-hugetlb: BASIC # memfd-hugetlb: SEAL-EXEC # memfd-hugetlb: Apply SEAL_EXEC # fchmod(/memfd:kern_memfd_seal_exec (deleted), 00777) didn't fail as expected # ./run_hugetlbfs_test.sh: line 60: 2047 Aborted ./memfd_test hugetlbfs # opening: ./mnt/memfd # fuse: DONE ok 3 selftests: memfd: run_hugetlbfs_test.sh make: Leaving directory '/usr/src/perf_selftests-x86_64-rhel-8.3-kselftests-fcbc96276c22a1d146eaac0cff24b8149c2d967a/tools/testing/selftests/memfd' 2024-08-22 01:08:06 make -j36 -C mincore make: Entering directory '/usr/src/perf_selftests-x86_64-rhel-8.3-kselftests-fcbc96276c22a1d146eaac0cff24b8149c2d967a/tools/testing/selftests/mincore' CC mincore_selftest make: Leaving directory '/usr/src/perf_selftests-x86_64-rhel-8.3-kselftests-fcbc96276c22a1d146eaac0cff24b8149c2d967a/tools/testing/selftests/mincore' 2024-08-22 01:08:06 make quicktest=1 run_tests -C mincore make: Entering directory '/usr/src/perf_selftests-x86_64-rhel-8.3-kselftests-fcbc96276c22a1d146eaac0cff24b8149c2d967a/tools/testing/selftests/mincore' TAP version 13 1..1 # timeout set to 300 # selftests: mincore: mincore_selftest # TAP version 13 # 1..5 # # Starting 5 tests from 1 test cases. # # RUN global.basic_interface ... # # OK global.basic_interface # ok 1 global.basic_interface # # RUN global.check_anonymous_locked_pages ... # # OK global.check_anonymous_locked_pages # ok 2 global.check_anonymous_locked_pages # # RUN global.check_huge_pages ... # # SKIP No huge pages available or CONFIG_HUGETLB_PAGE disabled. # # OK global.check_huge_pages # ok 3 global.check_huge_pages # SKIP No huge pages available or CONFIG_HUGETLB_PAGE disabled. # # RUN global.check_file_mmap ... # # SKIP fallocate not supported by filesystem. # # OK global.check_file_mmap # ok 4 global.check_file_mmap # SKIP fallocate not supported by filesystem. # # RUN global.check_tmpfs_mmap ... # # OK global.check_tmpfs_mmap # ok 5 global.check_tmpfs_mmap # # PASSED: 5 / 5 tests passed. # # Totals: pass:3 fail:0 xfail:0 xpass:0 skip:2 error:0 ok 1 selftests: mincore: mincore_selftest make: Leaving directory '/usr/src/perf_selftests-x86_64-rhel-8.3-kselftests-fcbc96276c22a1d146eaac0cff24b8149c2d967a/tools/testing/selftests/mincore' 2024-08-22 01:08:07 make -j36 -C mount make: Entering directory '/usr/src/perf_selftests-x86_64-rhel-8.3-kselftests-fcbc96276c22a1d146eaac0cff24b8149c2d967a/tools/testing/selftests/mount' CC unprivileged-remount-test CC nosymfollow-test make: Leaving directory '/usr/src/perf_selftests-x86_64-rhel-8.3-kselftests-fcbc96276c22a1d146eaac0cff24b8149c2d967a/tools/testing/selftests/mount' 2024-08-22 01:08:07 make quicktest=1 run_tests -C mount make: Entering directory '/usr/src/perf_selftests-x86_64-rhel-8.3-kselftests-fcbc96276c22a1d146eaac0cff24b8149c2d967a/tools/testing/selftests/mount' TAP version 13 1..2 # timeout set to 300 # selftests: mount: run_unprivileged_remount.sh ok 1 selftests: mount: run_unprivileged_remount.sh # timeout set to 300 # selftests: mount: run_nosymfollow.sh ok 2 selftests: mount: run_nosymfollow.sh make: Leaving directory '/usr/src/perf_selftests-x86_64-rhel-8.3-kselftests-fcbc96276c22a1d146eaac0cff24b8149c2d967a/tools/testing/selftests/mount' 2024-08-22 01:08:08 make -j36 -C mount_setattr make: Entering directory '/usr/src/perf_selftests-x86_64-rhel-8.3-kselftests-fcbc96276c22a1d146eaac0cff24b8149c2d967a/tools/testing/selftests/mount_setattr' CC mount_setattr_test make: Leaving directory '/usr/src/perf_selftests-x86_64-rhel-8.3-kselftests-fcbc96276c22a1d146eaac0cff24b8149c2d967a/tools/testing/selftests/mount_setattr' 2024-08-22 01:08:09 make quicktest=1 run_tests -C mount_setattr make: Entering directory '/usr/src/perf_selftests-x86_64-rhel-8.3-kselftests-fcbc96276c22a1d146eaac0cff24b8149c2d967a/tools/testing/selftests/mount_setattr' TAP version 13 1..1 # timeout set to 300 # selftests: mount_setattr: mount_setattr_test # TAP version 13 # 1..21 # # Starting 21 tests from 2 test cases. # # RUN mount_setattr.invalid_attributes ... # # OK mount_setattr.invalid_attributes # ok 1 mount_setattr.invalid_attributes # # RUN mount_setattr.extensibility ... # # OK mount_setattr.extensibility # ok 2 mount_setattr.extensibility # # RUN mount_setattr.basic ... # # OK mount_setattr.basic # ok 3 mount_setattr.basic # # RUN mount_setattr.basic_recursive ... # # OK mount_setattr.basic_recursive # ok 4 mount_setattr.basic_recursive # # RUN mount_setattr.mount_has_writers ... # # OK mount_setattr.mount_has_writers # ok 5 mount_setattr.mount_has_writers # # RUN mount_setattr.mixed_mount_options ... # # OK mount_setattr.mixed_mount_options # ok 6 mount_setattr.mixed_mount_options # # RUN mount_setattr.time_changes ... # # OK mount_setattr.time_changes # ok 7 mount_setattr.time_changes # # RUN mount_setattr.multi_threaded ... # # OK mount_setattr.multi_threaded # ok 8 mount_setattr.multi_threaded # # RUN mount_setattr.wrong_user_namespace ... # # OK mount_setattr.wrong_user_namespace # ok 9 mount_setattr.wrong_user_namespace # # RUN mount_setattr.wrong_mount_namespace ... # # OK mount_setattr.wrong_mount_namespace # ok 10 mount_setattr.wrong_mount_namespace # # RUN mount_setattr.mount_attr_nosymfollow ... # # OK mount_setattr.mount_attr_nosymfollow # ok 11 mount_setattr.mount_attr_nosymfollow # # RUN mount_setattr_idmapped.invalid_fd_negative ... # # OK mount_setattr_idmapped.invalid_fd_negative # ok 12 mount_setattr_idmapped.invalid_fd_negative # # RUN mount_setattr_idmapped.invalid_fd_large ... # # OK mount_setattr_idmapped.invalid_fd_large # ok 13 mount_setattr_idmapped.invalid_fd_large # # RUN mount_setattr_idmapped.invalid_fd_closed ... # # OK mount_setattr_idmapped.invalid_fd_closed # ok 14 mount_setattr_idmapped.invalid_fd_closed # # RUN mount_setattr_idmapped.invalid_fd_initial_userns ... # # OK mount_setattr_idmapped.invalid_fd_initial_userns # ok 15 mount_setattr_idmapped.invalid_fd_initial_userns # # RUN mount_setattr_idmapped.attached_mount_inside_current_mount_namespace ... # # OK mount_setattr_idmapped.attached_mount_inside_current_mount_namespace # ok 16 mount_setattr_idmapped.attached_mount_inside_current_mount_namespace # # RUN mount_setattr_idmapped.attached_mount_outside_current_mount_namespace ... # # OK mount_setattr_idmapped.attached_mount_outside_current_mount_namespace # ok 17 mount_setattr_idmapped.attached_mount_outside_current_mount_namespace # # RUN mount_setattr_idmapped.detached_mount_inside_current_mount_namespace ... # # OK mount_setattr_idmapped.detached_mount_inside_current_mount_namespace # ok 18 mount_setattr_idmapped.detached_mount_inside_current_mount_namespace # # RUN mount_setattr_idmapped.detached_mount_outside_current_mount_namespace ... # # OK mount_setattr_idmapped.detached_mount_outside_current_mount_namespace # ok 19 mount_setattr_idmapped.detached_mount_outside_current_mount_namespace # # RUN mount_setattr_idmapped.change_idmapping ... # # OK mount_setattr_idmapped.change_idmapping # ok 20 mount_setattr_idmapped.change_idmapping # # RUN mount_setattr_idmapped.idmap_mount_tree_invalid ... # # mount_setattr_test.c:1428:idmap_mount_tree_invalid:Expected sys_mount_setattr(open_tree_fd, "", AT_EMPTY_PATH, &attr, sizeof(attr)) (0) != 0 (0) # # idmap_mount_tree_invalid: Test terminated by assertion # # FAIL mount_setattr_idmapped.idmap_mount_tree_invalid # not ok 21 mount_setattr_idmapped.idmap_mount_tree_invalid # # FAILED: 20 / 21 tests passed. # # Totals: pass:20 fail:1 xfail:0 xpass:0 skip:0 error:0 not ok 1 selftests: mount_setattr: mount_setattr_test # exit=1 make: Leaving directory '/usr/src/perf_selftests-x86_64-rhel-8.3-kselftests-fcbc96276c22a1d146eaac0cff24b8149c2d967a/tools/testing/selftests/mount_setattr' 2024-08-22 01:08:11 make -j36 -C move_mount_set_group make: Entering directory '/usr/src/perf_selftests-x86_64-rhel-8.3-kselftests-fcbc96276c22a1d146eaac0cff24b8149c2d967a/tools/testing/selftests/move_mount_set_group' CC move_mount_set_group_test make: Leaving directory '/usr/src/perf_selftests-x86_64-rhel-8.3-kselftests-fcbc96276c22a1d146eaac0cff24b8149c2d967a/tools/testing/selftests/move_mount_set_group' 2024-08-22 01:08:11 make quicktest=1 run_tests -C move_mount_set_group make: Entering directory '/usr/src/perf_selftests-x86_64-rhel-8.3-kselftests-fcbc96276c22a1d146eaac0cff24b8149c2d967a/tools/testing/selftests/move_mount_set_group' TAP version 13 1..0 make: Leaving directory '/usr/src/perf_selftests-x86_64-rhel-8.3-kselftests-fcbc96276c22a1d146eaac0cff24b8149c2d967a/tools/testing/selftests/move_mount_set_group' 2024-08-22 01:08:11 make -j36 -C mqueue make: Entering directory '/usr/src/perf_selftests-x86_64-rhel-8.3-kselftests-fcbc96276c22a1d146eaac0cff24b8149c2d967a/tools/testing/selftests/mqueue' CC mq_open_tests CC mq_perf_tests make: Leaving directory '/usr/src/perf_selftests-x86_64-rhel-8.3-kselftests-fcbc96276c22a1d146eaac0cff24b8149c2d967a/tools/testing/selftests/mqueue' 2024-08-22 01:08:12 make quicktest=1 run_tests -C mqueue make: Entering directory '/usr/src/perf_selftests-x86_64-rhel-8.3-kselftests-fcbc96276c22a1d146eaac0cff24b8149c2d967a/tools/testing/selftests/mqueue' TAP version 13 1..2 # timeout set to 300 # selftests: mqueue: mq_open_tests # Using Default queue path - /test1 # # Initial system state: # Using queue path: /test1 # RLIMIT_MSGQUEUE(soft): 819200 # RLIMIT_MSGQUEUE(hard): 819200 # Maximum Message Size: 8192 # Maximum Queue Size: 10 # Default Message Size: 8192 # Default Queue Size: 10 # # Adjusted system state for testing: # RLIMIT_MSGQUEUE(soft): 819200 # RLIMIT_MSGQUEUE(hard): 819200 # Maximum Message Size: 8192 # Maximum Queue Size: 10 # Default Message Size: 8192 # Default Queue Size: 10 # # # Test series 1, behavior when no attr struct passed to mq_open: # Kernel supports setting defaults separately from maximums: PASS # Given sane values, mq_open without an attr struct succeeds: PASS # Kernel properly honors default setting knobs: PASS # Kernel properly limits default values to lesser of default/max: PASS # Kernel properly fails to create queue when defaults would # exceed rlimit: PASS # # # Test series 2, behavior when attr struct is passed to mq_open: # Queue open in excess of rlimit max when euid = 0 failed: PASS # Queue open with mq_maxmsg > limit when euid = 0 succeeded: PASS # Queue open with mq_msgsize > limit when euid = 0 succeeded: PASS # Queue open with total size > 2GB when euid = 0 failed: PASS # Queue open in excess of rlimit max when euid = 99 failed: PASS # Queue open with mq_maxmsg > limit when euid = 99 failed: PASS # Queue open with mq_msgsize > limit when euid = 99 failed: PASS # Queue open with total size > 2GB when euid = 99 failed: PASS ok 1 selftests: mqueue: mq_open_tests # timeout set to 300 # selftests: mqueue: mq_perf_tests # # Initial system state: # Using queue path: /mq_perf_tests # RLIMIT_MSGQUEUE(soft): 819200 # RLIMIT_MSGQUEUE(hard): 819200 # Maximum Message Size: 8192 # Maximum Queue Size: 10 # Nice value: 0 # # Adjusted system state for testing: # RLIMIT_MSGQUEUE(soft): (unlimited) # RLIMIT_MSGQUEUE(hard): (unlimited) # Maximum Message Size: 16777216 # Maximum Queue Size: 65530 # Nice value: -20 # Continuous mode: (disabled) # CPUs to pin: 35 # # Queue /mq_perf_tests created: # mq_flags: O_NONBLOCK # mq_maxmsg: 65530 # mq_msgsize: 16 # mq_curmsgs: 0 # # Started mqueue performance test thread on CPU 35 # Max priorities: 32768 # Clock resolution: 1 nsec # # Test #1: Time send/recv message, queue empty # (10000000 iterations) # Send msg: 88.818626850s total time # 8881 nsec/msg # Recv msg: 163.262478412s total time # 16326 nsec/msg # # Test #2a: Time send/recv message, queue full, constant prio # : # (100000 iterations) # Filling queue...done. 0.445867390s # Testing...done. # Send msg: 0.883202716s total time # 8832 nsec/msg # Recv msg: 0.715440122s total time # 7154 nsec/msg # Draining queue...done. 0.374066807s # # Test #2b: Time send/recv message, queue full, increasing prio # : # (100000 iterations) # Filling queue...done. 0.627829732s # Testing...Caught signal 15, exiting # not ok 2 selftests: mqueue: mq_perf_tests # TIMEOUT 300 seconds make: Leaving directory '/usr/src/perf_selftests-x86_64-rhel-8.3-kselftests-fcbc96276c22a1d146eaac0cff24b8149c2d967a/tools/testing/selftests/mqueue' 2024-08-22 01:13:13 make -j36 -C nci make: Entering directory '/usr/src/perf_selftests-x86_64-rhel-8.3-kselftests-fcbc96276c22a1d146eaac0cff24b8149c2d967a/tools/testing/selftests/nci' CC nci_dev make: Leaving directory '/usr/src/perf_selftests-x86_64-rhel-8.3-kselftests-fcbc96276c22a1d146eaac0cff24b8149c2d967a/tools/testing/selftests/nci' 2024-08-22 01:13:13 make quicktest=1 run_tests -C nci make: Entering directory '/usr/src/perf_selftests-x86_64-rhel-8.3-kselftests-fcbc96276c22a1d146eaac0cff24b8149c2d967a/tools/testing/selftests/nci' TAP version 13 1..1 # timeout set to 300 # selftests: nci: nci_dev # TAP version 13 # 1..8 # # Starting 8 tests from 2 test cases. # # RUN NCI.NCI1_0.init ... # # nci_dev.c:422:init:Expected self->virtual_nci_fd (-1) > -1 (-1) # # init: Test terminated by assertion # # FAIL NCI.NCI1_0.init # not ok 1 NCI.NCI1_0.init # # RUN NCI.NCI1_0.start_poll ... # # nci_dev.c:422:start_poll:Expected self->virtual_nci_fd (-1) > -1 (-1) # # start_poll: Test terminated by assertion # # FAIL NCI.NCI1_0.start_poll # not ok 2 NCI.NCI1_0.start_poll # # RUN NCI.NCI1_0.t4t_tag_read ... # # nci_dev.c:422:t4t_tag_read:Expected self->virtual_nci_fd (-1) > -1 (-1) # # t4t_tag_read: Test terminated by assertion # # FAIL NCI.NCI1_0.t4t_tag_read # not ok 3 NCI.NCI1_0.t4t_tag_read # # RUN NCI.NCI1_0.deinit ... # # nci_dev.c:422:deinit:Expected self->virtual_nci_fd (-1) > -1 (-1) # # deinit: Test terminated by assertion # # FAIL NCI.NCI1_0.deinit # not ok 4 NCI.NCI1_0.deinit # # RUN NCI.NCI2_0.init ... # # nci_dev.c:422:init:Expected self->virtual_nci_fd (-1) > -1 (-1) # # init: Test terminated by assertion # # FAIL NCI.NCI2_0.init # not ok 5 NCI.NCI2_0.init # # RUN NCI.NCI2_0.start_poll ... # # nci_dev.c:422:start_poll:Expected self->virtual_nci_fd (-1) > -1 (-1) # # start_poll: Test terminated by assertion # # FAIL NCI.NCI2_0.start_poll # not ok 6 NCI.NCI2_0.start_poll # # RUN NCI.NCI2_0.t4t_tag_read ... # # nci_dev.c:422:t4t_tag_read:Expected self->virtual_nci_fd (-1) > -1 (-1) # # t4t_tag_read: Test terminated by assertion # # FAIL NCI.NCI2_0.t4t_tag_read # not ok 7 NCI.NCI2_0.t4t_tag_read # # RUN NCI.NCI2_0.deinit ... # # nci_dev.c:422:deinit:Expected self->virtual_nci_fd (-1) > -1 (-1) # # deinit: Test terminated by assertion # # FAIL NCI.NCI2_0.deinit # not ok 8 NCI.NCI2_0.deinit # # FAILED: 0 / 8 tests passed. # # Totals: pass:0 fail:8 xfail:0 xpass:0 skip:0 error:0 not ok 1 selftests: nci: nci_dev # exit=1 make: Leaving directory '/usr/src/perf_selftests-x86_64-rhel-8.3-kselftests-fcbc96276c22a1d146eaac0cff24b8149c2d967a/tools/testing/selftests/nci' 2024-08-22 01:13:14 make -j36 TARGETS=nolibc make[1]: Entering directory '/usr/src/perf_selftests-x86_64-rhel-8.3-kselftests-fcbc96276c22a1d146eaac0cff24b8149c2d967a/tools/testing/selftests/nolibc' Supported targets under selftests/nolibc: all call the "run" target below help this help sysroot create the nolibc sysroot here (uses $ARCH) nolibc-test build the executable (uses $CC and $CROSS_COMPILE) libc-test build an executable using the compiler's default libc instead run-user runs the executable under QEMU (uses $XARCH, $TEST) initramfs.cpio prepare the initramfs archive with nolibc-test initramfs prepare the initramfs tree with nolibc-test defconfig create a fresh new default config (uses $XARCH) kernel (re)build the kernel (uses $XARCH) kernel-standalone (re)build the kernel with the initramfs (uses $XARCH) run runs the kernel in QEMU after building it (uses $XARCH, $TEST) rerun runs a previously prebuilt kernel in QEMU (uses $XARCH, $TEST) clean clean the sysroot, initramfs, build and output files The output file is "run.out". Test ranges may be passed using $TEST. Currently using the following variables: ARCH = x86 XARCH = x86 CROSS_COMPILE = CC = gcc OUTPUT = /usr/src/perf_selftests-x86_64-rhel-8.3-kselftests-fcbc96276c22a1d146eaac0cff24b8149c2d967a/tools/testing/selftests/nolibc TEST = QEMU_ARCH = x86_64 [determined from $XARCH] IMAGE_NAME = bzImage [determined from $XARCH] make[1]: Leaving directory '/usr/src/perf_selftests-x86_64-rhel-8.3-kselftests-fcbc96276c22a1d146eaac0cff24b8149c2d967a/tools/testing/selftests/nolibc' 2024-08-22 01:13:14 make quicktest=1 run_tests -C nolibc make: Entering directory '/usr/src/perf_selftests-x86_64-rhel-8.3-kselftests-fcbc96276c22a1d146eaac0cff24b8149c2d967a/tools/testing/selftests/nolibc' make: *** No rule to make target 'run_tests'. Stop. make: Leaving directory '/usr/src/perf_selftests-x86_64-rhel-8.3-kselftests-fcbc96276c22a1d146eaac0cff24b8149c2d967a/tools/testing/selftests/nolibc' 2024-08-22 01:13:14 make -j36 -C nsfs make: Entering directory '/usr/src/perf_selftests-x86_64-rhel-8.3-kselftests-fcbc96276c22a1d146eaac0cff24b8149c2d967a/tools/testing/selftests/nsfs' CC owner CC pidns make: Leaving directory '/usr/src/perf_selftests-x86_64-rhel-8.3-kselftests-fcbc96276c22a1d146eaac0cff24b8149c2d967a/tools/testing/selftests/nsfs' 2024-08-22 01:13:14 make quicktest=1 run_tests -C nsfs make: Entering directory '/usr/src/perf_selftests-x86_64-rhel-8.3-kselftests-fcbc96276c22a1d146eaac0cff24b8149c2d967a/tools/testing/selftests/nsfs' TAP version 13 1..2 # timeout set to 300 # selftests: nsfs: owner ok 1 selftests: nsfs: owner # timeout set to 300 # selftests: nsfs: pidns ok 2 selftests: nsfs: pidns make: Leaving directory '/usr/src/perf_selftests-x86_64-rhel-8.3-kselftests-fcbc96276c22a1d146eaac0cff24b8149c2d967a/tools/testing/selftests/nsfs' 2024-08-22 01:13:15 make -j36 -C openat2 make: Entering directory '/usr/src/perf_selftests-x86_64-rhel-8.3-kselftests-fcbc96276c22a1d146eaac0cff24b8149c2d967a/tools/testing/selftests/openat2' CC openat2_test CC resolve_test CC rename_attack_test make: Leaving directory '/usr/src/perf_selftests-x86_64-rhel-8.3-kselftests-fcbc96276c22a1d146eaac0cff24b8149c2d967a/tools/testing/selftests/openat2' 2024-08-22 01:13:16 make quicktest=1 run_tests -C openat2 make: Entering directory '/usr/src/perf_selftests-x86_64-rhel-8.3-kselftests-fcbc96276c22a1d146eaac0cff24b8149c2d967a/tools/testing/selftests/openat2' TAP version 13 1..3 # timeout set to 300 # selftests: openat2: openat2_test # TAP version 13 # 1..116 # ok 1 openat2 with normal struct argument [misalign=0] succeeds # ok 2 openat2 with normal struct argument [misalign=1] succeeds # ok 3 openat2 with normal struct argument [misalign=2] succeeds # ok 4 openat2 with normal struct argument [misalign=3] succeeds # ok 5 openat2 with normal struct argument [misalign=4] succeeds # ok 6 openat2 with normal struct argument [misalign=5] succeeds # ok 7 openat2 with normal struct argument [misalign=6] succeeds # ok 8 openat2 with normal struct argument [misalign=7] succeeds # ok 9 openat2 with normal struct argument [misalign=8] succeeds # ok 10 openat2 with normal struct argument [misalign=9] succeeds # ok 11 openat2 with normal struct argument [misalign=11] succeeds # ok 12 openat2 with normal struct argument [misalign=17] succeeds # ok 13 openat2 with normal struct argument [misalign=87] succeeds # ok 14 openat2 with bigger struct (zeroed out) argument [misalign=0] succeeds # ok 15 openat2 with bigger struct (zeroed out) argument [misalign=1] succeeds # ok 16 openat2 with bigger struct (zeroed out) argument [misalign=2] succeeds # ok 17 openat2 with bigger struct (zeroed out) argument [misalign=3] succeeds # ok 18 openat2 with bigger struct (zeroed out) argument [misalign=4] succeeds # ok 19 openat2 with bigger struct (zeroed out) argument [misalign=5] succeeds # ok 20 openat2 with bigger struct (zeroed out) argument [misalign=6] succeeds # ok 21 openat2 with bigger struct (zeroed out) argument [misalign=7] succeeds # ok 22 openat2 with bigger struct (zeroed out) argument [misalign=8] succeeds # ok 23 openat2 with bigger struct (zeroed out) argument [misalign=9] succeeds # ok 24 openat2 with bigger struct (zeroed out) argument [misalign=11] succeeds # ok 25 openat2 with bigger struct (zeroed out) argument [misalign=17] succeeds # ok 26 openat2 with bigger struct (zeroed out) argument [misalign=87] succeeds # ok 27 openat2 with zero-sized 'struct' argument [misalign=0] fails with -22 (Invalid argument) # ok 28 openat2 with zero-sized 'struct' argument [misalign=1] fails with -22 (Invalid argument) # ok 29 openat2 with zero-sized 'struct' argument [misalign=2] fails with -22 (Invalid argument) # ok 30 openat2 with zero-sized 'struct' argument [misalign=3] fails with -22 (Invalid argument) # ok 31 openat2 with zero-sized 'struct' argument [misalign=4] fails with -22 (Invalid argument) # ok 32 openat2 with zero-sized 'struct' argument [misalign=5] fails with -22 (Invalid argument) # ok 33 openat2 with zero-sized 'struct' argument [misalign=6] fails with -22 (Invalid argument) # ok 34 openat2 with zero-sized 'struct' argument [misalign=7] fails with -22 (Invalid argument) # ok 35 openat2 with zero-sized 'struct' argument [misalign=8] fails with -22 (Invalid argument) # ok 36 openat2 with zero-sized 'struct' argument [misalign=9] fails with -22 (Invalid argument) # ok 37 openat2 with zero-sized 'struct' argument [misalign=11] fails with -22 (Invalid argument) # ok 38 openat2 with zero-sized 'struct' argument [misalign=17] fails with -22 (Invalid argument) # ok 39 openat2 with zero-sized 'struct' argument [misalign=87] fails with -22 (Invalid argument) # ok 40 openat2 with smaller-than-v0 struct argument [misalign=0] fails with -22 (Invalid argument) # ok 41 openat2 with smaller-than-v0 struct argument [misalign=1] fails with -22 (Invalid argument) # ok 42 openat2 with smaller-than-v0 struct argument [misalign=2] fails with -22 (Invalid argument) # ok 43 openat2 with smaller-than-v0 struct argument [misalign=3] fails with -22 (Invalid argument) # ok 44 openat2 with smaller-than-v0 struct argument [misalign=4] fails with -22 (Invalid argument) # ok 45 openat2 with smaller-than-v0 struct argument [misalign=5] fails with -22 (Invalid argument) # ok 46 openat2 with smaller-than-v0 struct argument [misalign=6] fails with -22 (Invalid argument) # ok 47 openat2 with smaller-than-v0 struct argument [misalign=7] fails with -22 (Invalid argument) # ok 48 openat2 with smaller-than-v0 struct argument [misalign=8] fails with -22 (Invalid argument) # ok 49 openat2 with smaller-than-v0 struct argument [misalign=9] fails with -22 (Invalid argument) # ok 50 openat2 with smaller-than-v0 struct argument [misalign=11] fails with -22 (Invalid argument) # ok 51 openat2 with smaller-than-v0 struct argument [misalign=17] fails with -22 (Invalid argument) # ok 52 openat2 with smaller-than-v0 struct argument [misalign=87] fails with -22 (Invalid argument) # ok 53 openat2 with bigger struct (non-zero data in first 'future field') argument [misalign=0] fails with -7 (Argument list too long) # ok 54 openat2 with bigger struct (non-zero data in first 'future field') argument [misalign=1] fails with -7 (Argument list too long) # ok 55 openat2 with bigger struct (non-zero data in first 'future field') argument [misalign=2] fails with -7 (Argument list too long) # ok 56 openat2 with bigger struct (non-zero data in first 'future field') argument [misalign=3] fails with -7 (Argument list too long) # ok 57 openat2 with bigger struct (non-zero data in first 'future field') argument [misalign=4] fails with -7 (Argument list too long) # ok 58 openat2 with bigger struct (non-zero data in first 'future field') argument [misalign=5] fails with -7 (Argument list too long) # ok 59 openat2 with bigger struct (non-zero data in first 'future field') argument [misalign=6] fails with -7 (Argument list too long) # ok 60 openat2 with bigger struct (non-zero data in first 'future field') argument [misalign=7] fails with -7 (Argument list too long) # ok 61 openat2 with bigger struct (non-zero data in first 'future field') argument [misalign=8] fails with -7 (Argument list too long) # ok 62 openat2 with bigger struct (non-zero data in first 'future field') argument [misalign=9] fails with -7 (Argument list too long) # ok 63 openat2 with bigger struct (non-zero data in first 'future field') argument [misalign=11] fails with -7 (Argument list too long) # ok 64 openat2 with bigger struct (non-zero data in first 'future field') argument [misalign=17] fails with -7 (Argument list too long) # ok 65 openat2 with bigger struct (non-zero data in first 'future field') argument [misalign=87] fails with -7 (Argument list too long) # ok 66 openat2 with bigger struct (non-zero data in middle of 'future fields') argument [misalign=0] fails with -7 (Argument list too long) # ok 67 openat2 with bigger struct (non-zero data in middle of 'future fields') argument [misalign=1] fails with -7 (Argument list too long) # ok 68 openat2 with bigger struct (non-zero data in middle of 'future fields') argument [misalign=2] fails with -7 (Argument list too long) # ok 69 openat2 with bigger struct (non-zero data in middle of 'future fields') argument [misalign=3] fails with -7 (Argument list too long) # ok 70 openat2 with bigger struct (non-zero data in middle of 'future fields') argument [misalign=4] fails with -7 (Argument list too long) # ok 71 openat2 with bigger struct (non-zero data in middle of 'future fields') argument [misalign=5] fails with -7 (Argument list too long) # ok 72 openat2 with bigger struct (non-zero data in middle of 'future fields') argument [misalign=6] fails with -7 (Argument list too long) # ok 73 openat2 with bigger struct (non-zero data in middle of 'future fields') argument [misalign=7] fails with -7 (Argument list too long) # ok 74 openat2 with bigger struct (non-zero data in middle of 'future fields') argument [misalign=8] fails with -7 (Argument list too long) # ok 75 openat2 with bigger struct (non-zero data in middle of 'future fields') argument [misalign=9] fails with -7 (Argument list too long) # ok 76 openat2 with bigger struct (non-zero data in middle of 'future fields') argument [misalign=11] fails with -7 (Argument list too long) # ok 77 openat2 with bigger struct (non-zero data in middle of 'future fields') argument [misalign=17] fails with -7 (Argument list too long) # ok 78 openat2 with bigger struct (non-zero data in middle of 'future fields') argument [misalign=87] fails with -7 (Argument list too long) # ok 79 openat2 with bigger struct (non-zero data at end of 'future fields') argument [misalign=0] fails with -7 (Argument list too long) # ok 80 openat2 with bigger struct (non-zero data at end of 'future fields') argument [misalign=1] fails with -7 (Argument list too long) # ok 81 openat2 with bigger struct (non-zero data at end of 'future fields') argument [misalign=2] fails with -7 (Argument list too long) # ok 82 openat2 with bigger struct (non-zero data at end of 'future fields') argument [misalign=3] fails with -7 (Argument list too long) # ok 83 openat2 with bigger struct (non-zero data at end of 'future fields') argument [misalign=4] fails with -7 (Argument list too long) # ok 84 openat2 with bigger struct (non-zero data at end of 'future fields') argument [misalign=5] fails with -7 (Argument list too long) # ok 85 openat2 with bigger struct (non-zero data at end of 'future fields') argument [misalign=6] fails with -7 (Argument list too long) # ok 86 openat2 with bigger struct (non-zero data at end of 'future fields') argument [misalign=7] fails with -7 (Argument list too long) # ok 87 openat2 with bigger struct (non-zero data at end of 'future fields') argument [misalign=8] fails with -7 (Argument list too long) # ok 88 openat2 with bigger struct (non-zero data at end of 'future fields') argument [misalign=9] fails with -7 (Argument list too long) # ok 89 openat2 with bigger struct (non-zero data at end of 'future fields') argument [misalign=11] fails with -7 (Argument list too long) # ok 90 openat2 with bigger struct (non-zero data at end of 'future fields') argument [misalign=17] fails with -7 (Argument list too long) # ok 91 openat2 with bigger struct (non-zero data at end of 'future fields') argument [misalign=87] fails with -7 (Argument list too long) # ok 92 openat2 with incompatible flags (O_TMPFILE | O_PATH) fails with -22 (Invalid argument) # ok 93 openat2 with incompatible flags (O_TMPFILE | O_CREAT) fails with -22 (Invalid argument) # ok 94 openat2 with compatible flags (O_PATH | O_CLOEXEC) succeeds # ok 95 openat2 with compatible flags (O_PATH | O_DIRECTORY) succeeds # ok 96 openat2 with compatible flags (O_PATH | O_NOFOLLOW) succeeds # ok 97 openat2 with incompatible flags (O_PATH | O_RDWR) fails with -22 (Invalid argument) # ok 98 openat2 with incompatible flags (O_PATH | O_CREAT) fails with -22 (Invalid argument) # ok 99 openat2 with incompatible flags (O_PATH | O_EXCL) fails with -22 (Invalid argument) # ok 100 openat2 with incompatible flags (O_PATH | O_NOCTTY) fails with -22 (Invalid argument) # ok 101 openat2 with incompatible flags (O_PATH | O_DIRECT) fails with -22 (Invalid argument) # ok 102 openat2 with incompatible flags (O_PATH | O_LARGEFILE) fails with -22 (Invalid argument) # ok 103 openat2 with non-zero how.mode and O_RDONLY fails with -22 (Invalid argument) # ok 104 openat2 with non-zero how.mode and O_PATH fails with -22 (Invalid argument) # ok 105 openat2 with valid how.mode and O_CREAT succeeds # ok 106 openat2 with valid how.mode and O_TMPFILE succeeds # ok 107 openat2 with invalid how.mode and O_CREAT fails with -22 (Invalid argument) # ok 108 openat2 with invalid (very large) how.mode and O_CREAT fails with -22 (Invalid argument) # ok 109 openat2 with invalid how.mode and O_TMPFILE fails with -22 (Invalid argument) # ok 110 openat2 with invalid (very large) how.mode and O_TMPFILE fails with -22 (Invalid argument) # ok 111 openat2 with incompatible resolve flags (BENEATH | IN_ROOT) fails with -22 (Invalid argument) # ok 112 openat2 with invalid how.resolve and O_RDONLY fails with -22 (Invalid argument) # ok 113 openat2 with invalid how.resolve and O_CREAT fails with -22 (Invalid argument) # ok 114 openat2 with invalid how.resolve and O_TMPFILE fails with -22 (Invalid argument) # ok 115 openat2 with invalid how.resolve and O_PATH fails with -22 (Invalid argument) # ok 116 openat2 with currently unknown bit (1 << 63) fails with -22 (Invalid argument) # # Totals: pass:116 fail:0 xfail:0 xpass:0 skip:0 error:0 ok 1 selftests: openat2: openat2_test # timeout set to 300 # selftests: openat2: resolve_test # TAP version 13 # 1..88 # ok 1 [beneath] jump to / fails with -18 (Invalid cross-device link) # ok 2 [beneath] absolute link to $root fails with -18 (Invalid cross-device link) # ok 3 [beneath] chained absolute links to $root fails with -18 (Invalid cross-device link) # ok 4 [beneath] jump outside $root fails with -18 (Invalid cross-device link) # ok 5 [beneath] temporary jump outside $root fails with -18 (Invalid cross-device link) # ok 6 [beneath] symlink temporary jump outside $root fails with -18 (Invalid cross-device link) # ok 7 [beneath] chained symlink temporary jump outside $root fails with -18 (Invalid cross-device link) # ok 8 [beneath] garbage links to $root fails with -18 (Invalid cross-device link) # ok 9 [beneath] chained garbage links to $root fails with -18 (Invalid cross-device link) # ok 10 [beneath] ordinary path to 'root' gives path 'root' # ok 11 [beneath] ordinary path to 'etc' gives path 'etc' # ok 12 [beneath] ordinary path to 'etc/passwd' gives path 'etc/passwd' # ok 13 [beneath] relative symlink inside $root gives path 'etc/passwd' # ok 14 [beneath] chained-'..' relative symlink inside $root gives path 'etc/passwd' # ok 15 [beneath] absolute symlink component outside $root fails with -18 (Invalid cross-device link) # ok 16 [beneath] absolute symlink target outside $root fails with -18 (Invalid cross-device link) # ok 17 [beneath] absolute path outside $root fails with -18 (Invalid cross-device link) # ok 18 [beneath] cheeky absolute path outside $root fails with -18 (Invalid cross-device link) # ok 19 [beneath] chained cheeky absolute path outside $root fails with -18 (Invalid cross-device link) # ok 20 [beneath] tricky '..'-chained symlink outside $root fails with -18 (Invalid cross-device link) # ok 21 [beneath] tricky absolute + '..'-chained symlink outside $root fails with -18 (Invalid cross-device link) # ok 22 [beneath] tricky garbage link outside $root fails with -18 (Invalid cross-device link) # ok 23 [beneath] tricky absolute + garbage link outside $root fails with -18 (Invalid cross-device link) # ok 24 [in_root] jump to / gives path '.' # ok 25 [in_root] absolute symlink to /root gives path '.' # ok 26 [in_root] chained absolute symlinks to /root gives path '.' # ok 27 [in_root] '..' at root gives path '.' # ok 28 [in_root] '../root' at root gives path 'root' # ok 29 [in_root] relative symlink containing '..' above root gives path 'root' # ok 30 [in_root] garbage link to /root gives path 'root' # ok 31 [in_root] chained garbage links to /root gives path 'root' # ok 32 [in_root] relative path to 'root' gives path 'root' # ok 33 [in_root] relative path to 'etc' gives path 'etc' # ok 34 [in_root] relative path to 'etc/passwd' gives path 'etc/passwd' # ok 35 [in_root] relative symlink to 'etc/passwd' gives path 'etc/passwd' # ok 36 [in_root] chained-'..' relative symlink to 'etc/passwd' gives path 'etc/passwd' # ok 37 [in_root] chained-'..' absolute + relative symlink to 'etc/passwd' gives path 'etc/passwd' # ok 38 [in_root] absolute symlink to 'etc/passwd' gives path 'etc/passwd' # ok 39 [in_root] absolute path 'etc/passwd' gives path 'etc/passwd' # ok 40 [in_root] cheeky absolute path 'etc/passwd' gives path 'etc/passwd' # ok 41 [in_root] chained cheeky absolute path 'etc/passwd' gives path 'etc/passwd' # ok 42 [in_root] tricky '..'-chained symlink outside $root gives path 'etc/passwd' # ok 43 [in_root] tricky absolute + '..'-chained symlink outside $root gives path 'etc/passwd' # ok 44 [in_root] tricky absolute path + absolute + '..'-chained symlink outside $root gives path 'etc/passwd' # ok 45 [in_root] tricky garbage link outside $root gives path 'etc/passwd' # ok 46 [in_root] tricky absolute + garbage link outside $root gives path 'etc/passwd' # ok 47 [in_root] tricky absolute path + absolute + garbage link outside $root gives path 'etc/passwd' # ok 48 [in_root] O_CREAT of relative path inside $root gives path 'newfile1' # ok 49 [in_root] O_CREAT of absolute path gives path 'newfile2' # ok 50 [in_root] O_CREAT of tricky symlink outside root gives path 'newfile3' # ok 51 [no_xdev] cross into $mnt fails with -18 (Invalid cross-device link) # ok 52 [no_xdev] cross into $mnt/ fails with -18 (Invalid cross-device link) # ok 53 [no_xdev] cross into $mnt/. fails with -18 (Invalid cross-device link) # ok 54 [no_xdev] goto mountpoint root gives path 'mnt' # ok 55 [no_xdev] cross up through '..' fails with -18 (Invalid cross-device link) # ok 56 [no_xdev] temporary cross up through '..' fails with -18 (Invalid cross-device link) # ok 57 [no_xdev] temporary relative symlink cross up fails with -18 (Invalid cross-device link) # ok 58 [no_xdev] temporary absolute symlink cross up fails with -18 (Invalid cross-device link) # ok 59 [no_xdev] jump to / directly gives path '/' # ok 60 [no_xdev] jump to / (from /) directly gives path '/' # ok 61 [no_xdev] jump to / then proc fails with -18 (Invalid cross-device link) # ok 62 [no_xdev] jump to / then tmp fails with -18 (Invalid cross-device link) # ok 63 [no_xdev] cross through magic-link to self/root fails with -18 (Invalid cross-device link) # ok 64 [no_xdev] cross through magic-link to self/cwd fails with -18 (Invalid cross-device link) # ok 65 [no_xdev] jump through magic-link to same procfs gives path '/proc' # ok 66 [no_magiclinks] ordinary relative symlink gives path 'etc/passwd' # ok 67 [no_magiclinks] symlink to magic-link fails with -40 (Too many levels of symbolic links) # ok 68 [no_magiclinks] normal path to magic-link fails with -40 (Too many levels of symbolic links) # ok 69 [no_magiclinks] normal path to magic-link with O_NOFOLLOW gives path '/proc/3708/exe' # ok 70 [no_magiclinks] symlink to magic-link path component fails with -40 (Too many levels of symbolic links) # ok 71 [no_magiclinks] magic-link path component fails with -40 (Too many levels of symbolic links) # ok 72 [no_magiclinks] magic-link path component with O_NOFOLLOW fails with -40 (Too many levels of symbolic links) # ok 73 [no_symlinks] ordinary path to '.' gives path '.' # ok 74 [no_symlinks] ordinary path to 'root' gives path 'root' # ok 75 [no_symlinks] ordinary path to 'etc' gives path 'etc' # ok 76 [no_symlinks] ordinary path to 'etc/passwd' gives path 'etc/passwd' # ok 77 [no_symlinks] relative symlink target fails with -40 (Too many levels of symbolic links) # ok 78 [no_symlinks] relative symlink component fails with -40 (Too many levels of symbolic links) # ok 79 [no_symlinks] absolute symlink target fails with -40 (Too many levels of symbolic links) # ok 80 [no_symlinks] absolute symlink component fails with -40 (Too many levels of symbolic links) # ok 81 [no_symlinks] cheeky garbage link fails with -40 (Too many levels of symbolic links) # ok 82 [no_symlinks] cheeky absolute + garbage link fails with -40 (Too many levels of symbolic links) # ok 83 [no_symlinks] cheeky absolute + absolute symlink fails with -40 (Too many levels of symbolic links) # ok 84 [no_symlinks] relative symlink with O_NOFOLLOW gives path 'relsym' # ok 85 [no_symlinks] absolute symlink with O_NOFOLLOW gives path 'abssym' # ok 86 [no_symlinks] trailing symlink with O_NOFOLLOW gives path 'cheeky/garbagelink' # ok 87 [no_symlinks] multiple symlink components with O_NOFOLLOW fails with -40 (Too many levels of symbolic links) # ok 88 [no_symlinks] multiple symlink (and garbage link) components with O_NOFOLLOW fails with -40 (Too many levels of symbolic links) # # Totals: pass:88 fail:0 xfail:0 xpass:0 skip:0 error:0 ok 2 selftests: openat2: resolve_test # timeout set to 300 # selftests: openat2: rename_attack_test # TAP version 13 # 1..2 # # non-escapes: EAGAIN=24021 EXDEV=375979 E=0 success=0 # ok 1 rename attack with RESOLVE_BENEATH (400000 runs, got 0 escapes) # # non-escapes: EAGAIN=60981 EXDEV=0 E=0 success=339019 # ok 2 rename attack with RESOLVE_IN_ROOT (400000 runs, got 0 escapes) # # Totals: pass:2 fail:0 xfail:0 xpass:0 skip:0 error:0 ok 3 selftests: openat2: rename_attack_test make: Leaving directory '/usr/src/perf_selftests-x86_64-rhel-8.3-kselftests-fcbc96276c22a1d146eaac0cff24b8149c2d967a/tools/testing/selftests/openat2' 2024-08-22 01:14:39 make -j36 -C perf_events make: Entering directory '/usr/src/perf_selftests-x86_64-rhel-8.3-kselftests-fcbc96276c22a1d146eaac0cff24b8149c2d967a/tools/testing/selftests/perf_events' CC sigtrap_threads CC remove_on_exec CC watermark_signal make: Leaving directory '/usr/src/perf_selftests-x86_64-rhel-8.3-kselftests-fcbc96276c22a1d146eaac0cff24b8149c2d967a/tools/testing/selftests/perf_events' 2024-08-22 01:14:39 make quicktest=1 run_tests -C perf_events make: Entering directory '/usr/src/perf_selftests-x86_64-rhel-8.3-kselftests-fcbc96276c22a1d146eaac0cff24b8149c2d967a/tools/testing/selftests/perf_events' TAP version 13 1..3 # timeout set to 120 # selftests: perf_events: sigtrap_threads # TAP version 13 # 1..5 # # Starting 5 tests from 1 test cases. # # RUN sigtrap_threads.remain_disabled ... # # OK sigtrap_threads.remain_disabled # ok 1 sigtrap_threads.remain_disabled # # RUN sigtrap_threads.enable_event ... # # OK sigtrap_threads.enable_event # ok 2 sigtrap_threads.enable_event # # RUN sigtrap_threads.modify_and_enable_event ... # # OK sigtrap_threads.modify_and_enable_event # ok 3 sigtrap_threads.modify_and_enable_event # # RUN sigtrap_threads.signal_stress ... # # OK sigtrap_threads.signal_stress # ok 4 sigtrap_threads.signal_stress # # RUN sigtrap_threads.signal_stress_with_disable ... # # OK sigtrap_threads.signal_stress_with_disable # ok 5 sigtrap_threads.signal_stress_with_disable # # PASSED: 5 / 5 tests passed. # # Totals: pass:5 fail:0 xfail:0 xpass:0 skip:0 error:0 ok 1 selftests: perf_events: sigtrap_threads # timeout set to 120 # selftests: perf_events: remove_on_exec # TAP version 13 # 1..4 # # Starting 4 tests from 1 test cases. # # RUN remove_on_exec.fork_only ... # # OK remove_on_exec.fork_only # ok 1 remove_on_exec.fork_only # # RUN remove_on_exec.fork_exec_then_enable ... # # OK remove_on_exec.fork_exec_then_enable # ok 2 remove_on_exec.fork_exec_then_enable # # RUN remove_on_exec.enable_then_fork_exec ... # *# OK remove_on_exec.enable_then_fork_exec # ok 3 remove_on_exec.enable_then_fork_exec # # RUN remove_on_exec.exec_stress ... # ******************************# OK remove_on_exec.exec_stress # ok 4 remove_on_exec.exec_stress # # PASSED: 4 / 4 tests passed. # # Totals: pass:4 fail:0 xfail:0 xpass:0 skip:0 error:0 ok 2 selftests: perf_events: remove_on_exec # timeout set to 120 # selftests: perf_events: watermark_signal # TAP version 13 # 1..1 # # Starting 1 tests from 1 test cases. # # RUN global.watermark_signal ... # # OK global.watermark_signal # ok 1 global.watermark_signal # # PASSED: 1 / 1 tests passed. # # Totals: pass:1 fail:0 xfail:0 xpass:0 skip:0 error:0 ok 3 selftests: perf_events: watermark_signal make: Leaving directory '/usr/src/perf_selftests-x86_64-rhel-8.3-kselftests-fcbc96276c22a1d146eaac0cff24b8149c2d967a/tools/testing/selftests/perf_events' 2024-08-22 01:14:41 make -j36 -C pid_namespace make: Entering directory '/usr/src/perf_selftests-x86_64-rhel-8.3-kselftests-fcbc96276c22a1d146eaac0cff24b8149c2d967a/tools/testing/selftests/pid_namespace' CC regression_enomem make: Leaving directory '/usr/src/perf_selftests-x86_64-rhel-8.3-kselftests-fcbc96276c22a1d146eaac0cff24b8149c2d967a/tools/testing/selftests/pid_namespace' 2024-08-22 01:14:41 make quicktest=1 run_tests -C pid_namespace make: Entering directory '/usr/src/perf_selftests-x86_64-rhel-8.3-kselftests-fcbc96276c22a1d146eaac0cff24b8149c2d967a/tools/testing/selftests/pid_namespace' TAP version 13 1..1 # timeout set to 300 # selftests: pid_namespace: regression_enomem # TAP version 13 # 1..1 # # Starting 1 tests from 1 test cases. # # RUN global.regression_enomem ... # # OK global.regression_enomem # ok 1 global.regression_enomem # # PASSED: 1 / 1 tests passed. # # Totals: pass:1 fail:0 xfail:0 xpass:0 skip:0 error:0 ok 1 selftests: pid_namespace: regression_enomem make: Leaving directory '/usr/src/perf_selftests-x86_64-rhel-8.3-kselftests-fcbc96276c22a1d146eaac0cff24b8149c2d967a/tools/testing/selftests/pid_namespace' 2024-08-22 01:14:41 make -j36 -C power_supply make: Entering directory '/usr/src/perf_selftests-x86_64-rhel-8.3-kselftests-fcbc96276c22a1d146eaac0cff24b8149c2d967a/tools/testing/selftests/power_supply' make: Nothing to be done for 'all'. make: Leaving directory '/usr/src/perf_selftests-x86_64-rhel-8.3-kselftests-fcbc96276c22a1d146eaac0cff24b8149c2d967a/tools/testing/selftests/power_supply' 2024-08-22 01:14:41 make quicktest=1 run_tests -C power_supply make: Entering directory '/usr/src/perf_selftests-x86_64-rhel-8.3-kselftests-fcbc96276c22a1d146eaac0cff24b8149c2d967a/tools/testing/selftests/power_supply' TAP version 13 1..1 # timeout set to 300 # selftests: power_supply: test_power_supply_properties.sh # TAP version 13 # 1..0 # # Totals: pass:0 fail:0 xfail:0 xpass:0 skip:0 error:0 ok 1 selftests: power_supply: test_power_supply_properties.sh make: Leaving directory '/usr/src/perf_selftests-x86_64-rhel-8.3-kselftests-fcbc96276c22a1d146eaac0cff24b8149c2d967a/tools/testing/selftests/power_supply' 2024-08-22 01:14:42 make -j36 -C prctl make: Entering directory '/usr/src/perf_selftests-x86_64-rhel-8.3-kselftests-fcbc96276c22a1d146eaac0cff24b8149c2d967a/tools/testing/selftests/prctl' gcc -D_GNU_SOURCE= disable-tsc-ctxt-sw-stress-test.c -o disable-tsc-ctxt-sw-stress-test gcc -D_GNU_SOURCE= disable-tsc-on-off-stress-test.c -o disable-tsc-on-off-stress-test gcc -D_GNU_SOURCE= disable-tsc-test.c -o disable-tsc-test gcc -D_GNU_SOURCE= set-anon-vma-name-test.c -o set-anon-vma-name-test gcc -D_GNU_SOURCE= set-process-name.c -o set-process-name make: Leaving directory '/usr/src/perf_selftests-x86_64-rhel-8.3-kselftests-fcbc96276c22a1d146eaac0cff24b8149c2d967a/tools/testing/selftests/prctl' 2024-08-22 01:14:42 make quicktest=1 run_tests -C prctl make: Entering directory '/usr/src/perf_selftests-x86_64-rhel-8.3-kselftests-fcbc96276c22a1d146eaac0cff24b8149c2d967a/tools/testing/selftests/prctl' TAP version 13 1..5 # timeout set to 300 # selftests: prctl: disable-tsc-ctxt-sw-stress-test # [No further output means we're all right] ok 1 selftests: prctl: disable-tsc-ctxt-sw-stress-test # timeout set to 300 # selftests: prctl: disable-tsc-on-off-stress-test # [No further output means we're all right] ok 2 selftests: prctl: disable-tsc-on-off-stress-test # timeout set to 300 # selftests: prctl: disable-tsc-test # rdtsc() == 41647973716322 # prctl(PR_GET_TSC, &tsc_val); tsc_val == PR_TSC_ENABLE # rdtsc() == 41647974174901 # prctl(PR_SET_TSC, PR_TSC_ENABLE) # rdtsc() == 41647974186290 # prctl(PR_SET_TSC, PR_TSC_SIGSEGV) # rdtsc() == [ SIG_SEGV ] # prctl(PR_GET_TSC, &tsc_val); tsc_val == PR_TSC_SIGSEGV # prctl(PR_SET_TSC, PR_TSC_ENABLE) # rdtsc() == 41647974289368 ok 3 selftests: prctl: disable-tsc-test # timeout set to 300 # selftests: prctl: set-anon-vma-name-test # TAP version 13 # 1..1 # # Starting 1 tests from 1 test cases. # # RUN vma.renaming ... # # set-anon-vma-name-test.c:93:renaming:Try to rename the VMA with correct parameters # # set-anon-vma-name-test.c:97:renaming:Try to pass invalid name (with non-printable character \1) to rename the VMA # # set-anon-vma-name-test.c:100:renaming:Try to rename non-anonymous VMA # # OK vma.renaming # ok 1 vma.renaming # # PASSED: 1 / 1 tests passed. # # Totals: pass:1 fail:0 xfail:0 xpass:0 skip:0 error:0 ok 4 selftests: prctl: set-anon-vma-name-test # timeout set to 300 # selftests: prctl: set-process-name # TAP version 13 # 1..1 # # Starting 1 tests from 1 test cases. # # RUN global.rename_process ... # # OK global.rename_process # ok 1 global.rename_process # # PASSED: 1 / 1 tests passed. # # Totals: pass:1 fail:0 xfail:0 xpass:0 skip:0 error:0 ok 5 selftests: prctl: set-process-name make: Leaving directory '/usr/src/perf_selftests-x86_64-rhel-8.3-kselftests-fcbc96276c22a1d146eaac0cff24b8149c2d967a/tools/testing/selftests/prctl' 2024-08-22 01:15:04 make -j36 -C proc make: Entering directory '/usr/src/perf_selftests-x86_64-rhel-8.3-kselftests-fcbc96276c22a1d146eaac0cff24b8149c2d967a/tools/testing/selftests/proc' CC fd-001-lookup CC fd-002-posix-eq CC fd-003-kthread CC proc-2-is-kthread CC proc-loadavg-001 CC proc-empty-vm CC proc-pid-vm CC proc-self-map-files-001 CC proc-self-map-files-002 CC proc-self-isnt-kthread CC proc-self-syscall CC proc-subset-pid CC proc-self-wchan CC proc-tid0 CC proc-uptime-002 CC proc-uptime-001 CC self CC read CC setns-dcache CC setns-sysvipc CC thread-self CC proc-fsconfig-hidepid CC proc-multiple-procfs make: Leaving directory '/usr/src/perf_selftests-x86_64-rhel-8.3-kselftests-fcbc96276c22a1d146eaac0cff24b8149c2d967a/tools/testing/selftests/proc' 2024-08-22 01:15:05 make quicktest=1 run_tests -C proc make: Entering directory '/usr/src/perf_selftests-x86_64-rhel-8.3-kselftests-fcbc96276c22a1d146eaac0cff24b8149c2d967a/tools/testing/selftests/proc' TAP version 13 1..23 # timeout set to 300 # selftests: proc: fd-001-lookup ok 1 selftests: proc: fd-001-lookup # timeout set to 300 # selftests: proc: fd-002-posix-eq ok 2 selftests: proc: fd-002-posix-eq # timeout set to 300 # selftests: proc: fd-003-kthread ok 3 selftests: proc: fd-003-kthread # timeout set to 300 # selftests: proc: proc-2-is-kthread ok 4 selftests: proc: proc-2-is-kthread # timeout set to 300 # selftests: proc: proc-loadavg-001 ok 5 selftests: proc: proc-loadavg-001 # timeout set to 300 # selftests: proc: proc-empty-vm ok 6 selftests: proc: proc-empty-vm # timeout set to 300 # selftests: proc: proc-pid-vm ok 7 selftests: proc: proc-pid-vm # timeout set to 300 # selftests: proc: proc-self-map-files-001 ok 8 selftests: proc: proc-self-map-files-001 # timeout set to 300 # selftests: proc: proc-self-map-files-002 ok 9 selftests: proc: proc-self-map-files-002 # timeout set to 300 # selftests: proc: proc-self-isnt-kthread ok 10 selftests: proc: proc-self-isnt-kthread # timeout set to 300 # selftests: proc: proc-self-syscall ok 11 selftests: proc: proc-self-syscall # timeout set to 300 # selftests: proc: proc-self-wchan ok 12 selftests: proc: proc-self-wchan # timeout set to 300 # selftests: proc: proc-subset-pid ok 13 selftests: proc: proc-subset-pid # timeout set to 300 # selftests: proc: proc-tid0 ok 14 selftests: proc: proc-tid0 # timeout set to 300 # selftests: proc: proc-uptime-001 ok 15 selftests: proc: proc-uptime-001 # timeout set to 300 # selftests: proc: proc-uptime-002 ok 16 selftests: proc: proc-uptime-002 # timeout set to 300 # selftests: proc: read ok 17 selftests: proc: read # timeout set to 300 # selftests: proc: self ok 18 selftests: proc: self # timeout set to 300 # selftests: proc: setns-dcache ok 19 selftests: proc: setns-dcache # timeout set to 300 # selftests: proc: setns-sysvipc ok 20 selftests: proc: setns-sysvipc # timeout set to 300 # selftests: proc: thread-self ok 21 selftests: proc: thread-self # timeout set to 300 # selftests: proc: proc-multiple-procfs ok 22 selftests: proc: proc-multiple-procfs # timeout set to 300 # selftests: proc: proc-fsconfig-hidepid ok 23 selftests: proc: proc-fsconfig-hidepid make: Leaving directory '/usr/src/perf_selftests-x86_64-rhel-8.3-kselftests-fcbc96276c22a1d146eaac0cff24b8149c2d967a/tools/testing/selftests/proc' 2024-08-22 01:15:48 make -j36 -C pstore make: Entering directory '/usr/src/perf_selftests-x86_64-rhel-8.3-kselftests-fcbc96276c22a1d146eaac0cff24b8149c2d967a/tools/testing/selftests/pstore' make: Nothing to be done for 'all'. make: Leaving directory '/usr/src/perf_selftests-x86_64-rhel-8.3-kselftests-fcbc96276c22a1d146eaac0cff24b8149c2d967a/tools/testing/selftests/pstore' 2024-08-22 01:15:48 make quicktest=1 run_tests -C pstore make: Entering directory '/usr/src/perf_selftests-x86_64-rhel-8.3-kselftests-fcbc96276c22a1d146eaac0cff24b8149c2d967a/tools/testing/selftests/pstore' TAP version 13 1..2 # timeout set to 300 # selftests: pstore: pstore_tests # === Pstore unit tests (pstore_tests) === # UUID=aedffd1a-e0eb-4549-9a15-36028d2c052f # Checking pstore backend is registered ... ok # backend=ramoops # cmdline= ip=::::lkp-csl-d01::dhcp root=/dev/ram0 RESULT_ROOT=/result/kernel-selftests/group-02/lkp-csl-d01/debian-12-x86_64-20240206.cgz/x86_64-rhel-8.3-kselftests/gcc-12/fcbc96276c22a1d146eaac0cff24b8149c2d967a/3 BOOT_IMAGE=/pkg/linux/x86_64-rhel-8.3-kselftests/gcc-12/fcbc96276c22a1d146eaac0cff24b8149c2d967a/vmlinuz-6.11.0-rc1-00028-gfcbc96276c22 branch=tglx-devel/timers/posix job=/lkp/jobs/scheduled/lkp-csl-d01/kernel-selftests-group-02-debian-12-x86_64-20240206.cgz-fcbc96276c22-20240822-220202-1m74kae-2.yaml user=lkp ARCH=x86_64 kconfig=x86_64-rhel-8.3-kselftests commit=fcbc96276c22a1d146eaac0cff24b8149c2d967a sysctl.debug.test_sysctl.boot_int=1 intremap=posted_msi max_uptime=6000 LKP_SERVER=internal-lkp-server nokaslr selinux=0 debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 net.ifnames=0 printk.devkmsg=on panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 drbd.minor_count=8 systemd.log_level=err ignore_loglevel console=tty0 earlyprintk=ttyS0,115200 console=ttyS0,115200 vga=normal rw # Checking pstore console is registered ... ok # Checking /dev/pmsg0 exists ... ok # Writing unique string to /dev/pmsg0 ... ok ok 1 selftests: pstore: pstore_tests # timeout set to 300 # selftests: pstore: pstore_post_reboot_tests # === Pstore unit tests (pstore_post_reboot_tests) === # UUID=2da137a9-8ac1-4081-8fc4-ff6608e4cc8e # Checking pstore backend is registered ... ok # backend=ramoops # cmdline= ip=::::lkp-csl-d01::dhcp root=/dev/ram0 RESULT_ROOT=/result/kernel-selftests/group-02/lkp-csl-d01/debian-12-x86_64-20240206.cgz/x86_64-rhel-8.3-kselftests/gcc-12/fcbc96276c22a1d146eaac0cff24b8149c2d967a/3 BOOT_IMAGE=/pkg/linux/x86_64-rhel-8.3-kselftests/gcc-12/fcbc96276c22a1d146eaac0cff24b8149c2d967a/vmlinuz-6.11.0-rc1-00028-gfcbc96276c22 branch=tglx-devel/timers/posix job=/lkp/jobs/scheduled/lkp-csl-d01/kernel-selftests-group-02-debian-12-x86_64-20240206.cgz-fcbc96276c22-20240822-220202-1m74kae-2.yaml user=lkp ARCH=x86_64 kconfig=x86_64-rhel-8.3-kselftests commit=fcbc96276c22a1d146eaac0cff24b8149c2d967a sysctl.debug.test_sysctl.boot_int=1 intremap=posted_msi max_uptime=6000 LKP_SERVER=internal-lkp-server nokaslr selinux=0 debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 net.ifnames=0 printk.devkmsg=on panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 drbd.minor_count=8 systemd.log_level=err ignore_loglevel console=tty0 earlyprintk=ttyS0,115200 console=ttyS0,115200 vga=normal rw # pstore_crash_test has not been executed yet. we skip further tests. ok 2 selftests: pstore: pstore_post_reboot_tests # SKIP make: Leaving directory '/usr/src/perf_selftests-x86_64-rhel-8.3-kselftests-fcbc96276c22a1d146eaac0cff24b8149c2d967a/tools/testing/selftests/pstore' 2024-08-22 01:15:49 make -j36 TARGETS=ptp make[1]: Entering directory '/usr/src/perf_selftests-x86_64-rhel-8.3-kselftests-fcbc96276c22a1d146eaac0cff24b8149c2d967a/tools/testing/selftests/ptp' CC testptp make[1]: Leaving directory '/usr/src/perf_selftests-x86_64-rhel-8.3-kselftests-fcbc96276c22a1d146eaac0cff24b8149c2d967a/tools/testing/selftests/ptp' 2024-08-22 01:15:49 make quicktest=1 run_tests -C ptp make: Entering directory '/usr/src/perf_selftests-x86_64-rhel-8.3-kselftests-fcbc96276c22a1d146eaac0cff24b8149c2d967a/tools/testing/selftests/ptp' TAP version 13 1..2 # timeout set to 300 # selftests: ptp: testptp ok 1 selftests: ptp: testptp # timeout set to 300 # selftests: ptp: phc.sh # SKIP: PTP device not provided ok 2 selftests: ptp: phc.sh make: Leaving directory '/usr/src/perf_selftests-x86_64-rhel-8.3-kselftests-fcbc96276c22a1d146eaac0cff24b8149c2d967a/tools/testing/selftests/ptp' 2024-08-22 01:15:49 make -j36 -C ptrace make: Entering directory '/usr/src/perf_selftests-x86_64-rhel-8.3-kselftests-fcbc96276c22a1d146eaac0cff24b8149c2d967a/tools/testing/selftests/ptrace' CC get_syscall_info CC peeksiginfo CC vmaccess CC get_set_sud make: Leaving directory '/usr/src/perf_selftests-x86_64-rhel-8.3-kselftests-fcbc96276c22a1d146eaac0cff24b8149c2d967a/tools/testing/selftests/ptrace' 2024-08-22 01:15:50 make quicktest=1 run_tests -C ptrace make: Entering directory '/usr/src/perf_selftests-x86_64-rhel-8.3-kselftests-fcbc96276c22a1d146eaac0cff24b8149c2d967a/tools/testing/selftests/ptrace' TAP version 13 1..4 # timeout set to 300 # selftests: ptrace: get_syscall_info # TAP version 13 # 1..1 # # Starting 1 tests from 1 test cases. # # RUN global.get_syscall_info ... # # OK global.get_syscall_info # ok 1 global.get_syscall_info # # PASSED: 1 / 1 tests passed. # # Totals: pass:1 fail:0 xfail:0 xpass:0 skip:0 error:0 ok 1 selftests: ptrace: get_syscall_info # timeout set to 300 # selftests: ptrace: peeksiginfo # Error (peeksiginfo.c:143): Only 0 signals were read not ok 2 selftests: ptrace: peeksiginfo # exit=1 # timeout set to 300 # selftests: ptrace: vmaccess # TAP version 13 # 1..2 # # Starting 2 tests from 1 test cases. # # RUN global.vmaccess ... # # OK global.vmaccess # ok 1 global.vmaccess # # RUN global.attach ... # # attach: Test terminated by timeout # # FAIL global.attach # not ok 2 global.attach # # FAILED: 1 / 2 tests passed. # # Totals: pass:1 fail:1 xfail:0 xpass:0 skip:0 error:0 not ok 3 selftests: ptrace: vmaccess # exit=1 # timeout set to 300 # selftests: ptrace: get_set_sud # TAP version 13 # 1..1 # # Starting 1 tests from 1 test cases. # # RUN global.get_set_sud ... # # OK global.get_set_sud # ok 1 global.get_set_sud # # PASSED: 1 / 1 tests passed. # # Totals: pass:1 fail:0 xfail:0 xpass:0 skip:0 error:0 ok 4 selftests: ptrace: get_set_sud make: Leaving directory '/usr/src/perf_selftests-x86_64-rhel-8.3-kselftests-fcbc96276c22a1d146eaac0cff24b8149c2d967a/tools/testing/selftests/ptrace' 2024-08-22 01:16:21 make -j36 TARGETS=ring-buffer make[1]: Entering directory '/usr/src/perf_selftests-x86_64-rhel-8.3-kselftests-fcbc96276c22a1d146eaac0cff24b8149c2d967a/tools/testing/selftests/ring-buffer' CC map_test make[1]: Leaving directory '/usr/src/perf_selftests-x86_64-rhel-8.3-kselftests-fcbc96276c22a1d146eaac0cff24b8149c2d967a/tools/testing/selftests/ring-buffer' 2024-08-22 01:16:22 make quicktest=1 run_tests -C ring-buffer make: Entering directory '/usr/src/perf_selftests-x86_64-rhel-8.3-kselftests-fcbc96276c22a1d146eaac0cff24b8149c2d967a/tools/testing/selftests/ring-buffer' TAP version 13 1..1 # timeout set to 300 # selftests: ring-buffer: map_test # TAP version 13 # 1..6 # # Starting 6 tests from 3 test cases. # # RUN map.subbuf_size_4k.meta_page_check ... # # OK map.subbuf_size_4k.meta_page_check # ok 1 map.subbuf_size_4k.meta_page_check # # RUN map.subbuf_size_4k.data_mmap ... # # OK map.subbuf_size_4k.data_mmap # ok 2 map.subbuf_size_4k.data_mmap # # RUN map.subbuf_size_8k.meta_page_check ... # # OK map.subbuf_size_8k.meta_page_check # ok 3 map.subbuf_size_8k.meta_page_check # # RUN map.subbuf_size_8k.data_mmap ... # # OK map.subbuf_size_8k.data_mmap # ok 4 map.subbuf_size_8k.data_mmap # # RUN snapshot.excludes_map ... # # OK snapshot.excludes_map # ok 5 snapshot.excludes_map # # RUN snapshot.excluded_by_map ... # # OK snapshot.excluded_by_map # ok 6 snapshot.excluded_by_map # # PASSED: 6 / 6 tests passed. # # Totals: pass:6 fail:0 xfail:0 xpass:0 skip:0 error:0 ok 1 selftests: ring-buffer: map_test make: Leaving directory '/usr/src/perf_selftests-x86_64-rhel-8.3-kselftests-fcbc96276c22a1d146eaac0cff24b8149c2d967a/tools/testing/selftests/ring-buffer' 2024-08-22 01:16:23 make -j36 -C riscv make: Entering directory '/usr/src/perf_selftests-x86_64-rhel-8.3-kselftests-fcbc96276c22a1d146eaac0cff24b8149c2d967a/tools/testing/selftests/riscv' make: Leaving directory '/usr/src/perf_selftests-x86_64-rhel-8.3-kselftests-fcbc96276c22a1d146eaac0cff24b8149c2d967a/tools/testing/selftests/riscv' 2024-08-22 01:16:23 make quicktest=1 run_tests -C riscv make: Entering directory '/usr/src/perf_selftests-x86_64-rhel-8.3-kselftests-fcbc96276c22a1d146eaac0cff24b8149c2d967a/tools/testing/selftests/riscv' make: Leaving directory '/usr/src/perf_selftests-x86_64-rhel-8.3-kselftests-fcbc96276c22a1d146eaac0cff24b8149c2d967a/tools/testing/selftests/riscv' 2024-08-22 01:16:23 make -j36 -C rlimits make: Entering directory '/usr/src/perf_selftests-x86_64-rhel-8.3-kselftests-fcbc96276c22a1d146eaac0cff24b8149c2d967a/tools/testing/selftests/rlimits' CC rlimits-per-userns make: Leaving directory '/usr/src/perf_selftests-x86_64-rhel-8.3-kselftests-fcbc96276c22a1d146eaac0cff24b8149c2d967a/tools/testing/selftests/rlimits' 2024-08-22 01:16:23 make quicktest=1 run_tests -C rlimits make: Entering directory '/usr/src/perf_selftests-x86_64-rhel-8.3-kselftests-fcbc96276c22a1d146eaac0cff24b8149c2d967a/tools/testing/selftests/rlimits' TAP version 13 1..1 # timeout set to 300 # selftests: rlimits: rlimits-per-userns # rlimits-per-userns: (pid=12625) Starting testcase # rlimits-per-userns: (pid=12625): Setting RLIMIT_NPROC=1 # rlimits-per-userns: (pid=12626): New process starting ... # rlimits-per-userns: (pid=12626): Changing to uid=60000, gid=60000 # rlimits-per-userns: (pid=12626): Service running ... # rlimits-per-userns: (pid=12626): Unshare user namespace # rlimits-per-userns: (pid=12626): Executing real service ... # rlimits-per-userns: (pid=12627): New process starting ... # rlimits-per-userns: (pid=12627): Changing to uid=60000, gid=60000 # rlimits-per-userns: (pid=12627): Service running ... # rlimits-per-userns: (pid=12627): Unshare user namespace # rlimits-per-userns: (pid=12627): Executing real service ... # rlimits-per-userns: (pid=12625): pid 12626 killed by signal 10 # rlimits-per-userns: (pid=12625): pid 12627 killed by signal 10 # rlimits-per-userns: (pid=12625): Test passed ok 1 selftests: rlimits: rlimits-per-userns make: Leaving directory '/usr/src/perf_selftests-x86_64-rhel-8.3-kselftests-fcbc96276c22a1d146eaac0cff24b8149c2d967a/tools/testing/selftests/rlimits' 2024-08-22 01:16:24 make -j36 -C rtc make: Entering directory '/usr/src/perf_selftests-x86_64-rhel-8.3-kselftests-fcbc96276c22a1d146eaac0cff24b8149c2d967a/tools/testing/selftests/rtc' CC rtctest CC setdate make: Leaving directory '/usr/src/perf_selftests-x86_64-rhel-8.3-kselftests-fcbc96276c22a1d146eaac0cff24b8149c2d967a/tools/testing/selftests/rtc' 2024-08-22 01:16:25 make quicktest=1 run_tests -C rtc make: Entering directory '/usr/src/perf_selftests-x86_64-rhel-8.3-kselftests-fcbc96276c22a1d146eaac0cff24b8149c2d967a/tools/testing/selftests/rtc' TAP version 13 1..1 # timeout set to 210 # selftests: rtc: rtctest # TAP version 13 # 1..8 # # Starting 8 tests from 1 test cases. # # RUN rtc.date_read ... # # rtctest.c:52:date_read:Current RTC date/time is 22/08/2024 04:43:21. # # OK rtc.date_read # ok 1 rtc.date_read # # RUN rtc.date_read_loop ... # # rtctest.c:95:date_read_loop:Continuously reading RTC time for 30s (with 11ms breaks after every read). # # rtctest.c:122:date_read_loop:Performed 2710 RTC time reads. # # OK rtc.date_read_loop # ok 2 rtc.date_read_loop # # RUN rtc.uie_read ... # # OK rtc.uie_read # ok 3 rtc.uie_read # # RUN rtc.uie_select ... # # OK rtc.uie_select # ok 4 rtc.uie_select # # RUN rtc.alarm_alm_set ... # # rtctest.c:221:alarm_alm_set:Alarm time now set to 04:44:01. # # rtctest.c:241:alarm_alm_set:data: 1a0 # # OK rtc.alarm_alm_set # ok 5 rtc.alarm_alm_set # # RUN rtc.alarm_wkalm_set ... # # rtctest.c:281:alarm_wkalm_set:Alarm time now set to 22/08/2024 04:44:04. # # OK rtc.alarm_wkalm_set # ok 6 rtc.alarm_wkalm_set # # RUN rtc.alarm_alm_set_minute ... # # rtctest.c:331:alarm_alm_set_minute:Alarm time now set to 04:45:00. # # rtctest.c:351:alarm_alm_set_minute:data: 1a0 # # OK rtc.alarm_alm_set_minute # ok 7 rtc.alarm_alm_set_minute # # RUN rtc.alarm_wkalm_set_minute ... # # rtctest.c:391:alarm_wkalm_set_minute:Alarm time now set to 22/08/2024 04:46:00. # # OK rtc.alarm_wkalm_set_minute # ok 8 rtc.alarm_wkalm_set_minute # # PASSED: 8 / 8 tests passed. # # Totals: pass:8 fail:0 xfail:0 xpass:0 skip:0 error:0 ok 1 selftests: rtc: rtctest make: Leaving directory '/usr/src/perf_selftests-x86_64-rhel-8.3-kselftests-fcbc96276c22a1d146eaac0cff24b8149c2d967a/tools/testing/selftests/rtc'