early console in setup code Linux version 6.12.0-rc6-00146-g0f9b685626da (kbuild@ea47904a80b7) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 PREEMPT_DYNAMIC Fri Nov 8 21:53:13 CST 2024 Command line: ip=::::vm-meta-6::dhcp root=/dev/ram0 RESULT_ROOT=/result/rcuscale/300s-srcu/vm-snb/debian-12-x86_64-20240206.cgz/x86_64-randconfig-014-20241107/gcc-12/0f9b685626daa2f8e19a9788625c9b624c223e45/0 BOOT_IMAGE=/pkg/linux/x86_64-randconfig-014-20241107/gcc-12/0f9b685626daa2f8e19a9788625c9b624c223e45/vmlinuz-6.12.0-rc6-00146-g0f9b685626da branch=linux-next/master job=/lkp/jobs/scheduled/vm-meta-6/rcuscale-300s-srcu-debian-12-x86_64-20240206.cgz-x86_64-randconfig-014-20241107-0f9b685626da-20241108-49563-1ezn43f-0.yaml user=lkp ARCH=x86_64 kconfig=x86_64-randconfig-014-20241107 commit=0f9b685626daa2f8e19a9788625c9b624c223e45 intremap=posted_msi vmalloc=256M initramfs_async=0 page_owner=on carrier_timeout=60 max_uptime=1200 LKP_SERVER=internal-lkp-server selinux=0 debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 net.ifnames=0 printk.devkmsg=on panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 drbd.minor_count=8 systemd.log_level=err ignor BIOS-provided physical RAM map: BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved BIOS-e820: [mem 0x0000000000100000-0x00000000bffdffff] usable BIOS-e820: [mem 0x00000000bffe0000-0x00000000bfffffff] reserved BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved BIOS-e820: [mem 0x0000000100000000-0x000000043fffffff] usable printk: debug: ignoring loglevel setting. printk: legacy bootconsole [earlyser0] enabled NX (Execute Disable) protection: active APIC: Static calls initialized SMBIOS 2.8 present. DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-debian-1.16.2-1 04/01/2014 DMI: Memory slots populated: 1/1 Hypervisor detected: KVM kvm-clock: Using msrs 4b564d01 and 4b564d00 kvm-clock: using sched offset of 846979739 cycles clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns tsc: Detected 2893.028 MHz processor e820: update [mem 0x00000000-0x00000fff] usable ==> reserved e820: remove [mem 0x000a0000-0x000fffff] usable last_pfn = 0x440000 max_arch_pfn = 0x400000000 MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT last_pfn = 0xbffe0 max_arch_pfn = 0x400000000 Scan for SMP in [mem 0x00000000-0x000003ff] Scan for SMP in [mem 0x0009fc00-0x0009ffff] Scan for SMP in [mem 0x000f0000-0x000fffff] found SMP MP-table at [mem 0x000f5ba0-0x000f5baf] mpc: f5bb0-f5c80 RAMDISK: [mem 0x75a76000-0x7fffffff] ACPI: Early table checksum verification disabled ACPI: RSDP 0x00000000000F59B0 000014 (v00 BOCHS ) ACPI: RSDT 0x00000000BFFE1B56 000034 (v01 BOCHS BXPC 00000001 BXPC 00000001) ACPI: FACP 0x00000000BFFE1A02 000074 (v01 BOCHS BXPC 00000001 BXPC 00000001) ACPI: DSDT 0x00000000BFFE0040 0019C2 (v01 BOCHS BXPC 00000001 BXPC 00000001) ACPI: FACS 0x00000000BFFE0000 000040 ACPI: APIC 0x00000000BFFE1A76 000080 (v01 BOCHS BXPC 00000001 BXPC 00000001) ACPI: HPET 0x00000000BFFE1AF6 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001) ACPI: WAET 0x00000000BFFE1B2E 000028 (v01 BOCHS BXPC 00000001 BXPC 00000001) ACPI: Reserving FACP table memory at [mem 0xbffe1a02-0xbffe1a75] ACPI: Reserving DSDT table memory at [mem 0xbffe0040-0xbffe1a01] ACPI: Reserving FACS table memory at [mem 0xbffe0000-0xbffe003f] ACPI: Reserving APIC table memory at [mem 0xbffe1a76-0xbffe1af5] ACPI: Reserving HPET table memory at [mem 0xbffe1af6-0xbffe1b2d] ACPI: Reserving WAET table memory at [mem 0xbffe1b2e-0xbffe1b55] Mapped APIC to ffffffffff5fc000 ( fee00000) Zone ranges: DMA [mem 0x0000000000001000-0x0000000000ffffff] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] Normal [mem 0x0000000100000000-0x000000043fffffff] Movable zone start for each node Early memory node ranges node 0: [mem 0x0000000000001000-0x000000000009efff] node 0: [mem 0x0000000000100000-0x00000000bffdffff] node 0: [mem 0x0000000100000000-0x000000043fffffff] Initmem setup node 0 [mem 0x0000000000001000-0x000000043fffffff] On node 0, zone DMA: 1 pages in unavailable ranges On node 0, zone DMA: 97 pages in unavailable ranges On node 0, zone Normal: 32 pages in unavailable ranges kasan: KernelAddressSanitizer initialized ACPI: PM-Timer IO Port: 0x608 CPU topo: CPU limit of 1 reached. Ignoring further CPUs ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 0, APIC INT 02 ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) Int: type 0, pol 1, trig 3, bus 00, IRQ 05, APIC ID 0, APIC INT 05 ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 0, APIC INT 09 ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) Int: type 0, pol 1, trig 3, bus 00, IRQ 0a, APIC ID 0, APIC INT 0a ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) Int: type 0, pol 1, trig 3, bus 00, IRQ 0b, APIC ID 0, APIC INT 0b Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 0, APIC INT 01 Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 0, APIC INT 03 Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 0, APIC INT 04 Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 0, APIC INT 06 Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 0, APIC INT 07 Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 0, APIC INT 08 Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 0, APIC INT 0c Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 0, APIC INT 0d Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 0, APIC INT 0e Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 0, APIC INT 0f ACPI: Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8086a201 base: 0xfed00000 TSC deadline timer available CPU topo: Max. logical packages: 1 CPU topo: Max. logical dies: 1 CPU topo: Max. dies per package: 1 CPU topo: Max. threads per core: 1 CPU topo: Num. cores per package: 1 CPU topo: Num. threads per package: 1 CPU topo: Allowing 1 present CPUs plus 0 hotplug CPUs CPU topo: Rejected CPUs 1 mapped IOAPIC to ffffffffff5fb000 (fec00000) kvm-guest: APIC: eoi() replaced with kvm_guest_apic_eoi_write() [mem 0xc0000000-0xfeffbfff] available for PCI devices Booting paravirtualized kernel on KVM clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns No bootconfig data provided, so skipping bootconfig pcpu-alloc: s0 r0 d131072 u131072 alloc=1*131072 pcpu-alloc: [0] 0 Kernel command line: ip=::::vm-meta-6::dhcp root=/dev/ram0 RESULT_ROOT=/result/rcuscale/300s-srcu/vm-snb/debian-12-x86_64-20240206.cgz/x86_64-randconfig-014-20241107/gcc-12/0f9b685626daa2f8e19a9788625c9b624c223e45/0 BOOT_IMAGE=/pkg/linux/x86_64-randconfig-014-20241107/gcc-12/0f9b685626daa2f8e19a9788625c9b624c223e45/vmlinuz-6.12.0-rc6-00146-g0f9b685626da branch=linux-next/master job=/lkp/jobs/scheduled/vm-meta-6/rcuscale-300s-srcu-debian-12-x86_64-20240206.cgz-x86_64-randconfig-014-20241107-0f9b685626da-20241108-49563-1ezn43f-0.yaml user=lkp ARCH=x86_64 kconfig=x86_64-randconfig-014-20241107 commit=0f9b685626daa2f8e19a9788625c9b624c223e45 intremap=posted_msi vmalloc=256M initramfs_async=0 page_owner=on carrier_timeout=60 max_uptime=1200 LKP_SERVER=internal-lkp-server selinux=0 debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 net.ifnames=0 printk.devkmsg=on panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 drbd.minor_count=8 systemd.log_level=er sysrq: sysrq always enabled. ignoring the deprecated load_ramdisk= option Unknown kernel command line parameters "RESULT_ROOT=/result/rcuscale/300s-srcu/vm-snb/debian-12-x86_64-20240206.cgz/x86_64-randconfig-014-20241107/gcc-12/0f9b685626daa2f8e19a9788625c9b624c223e45/0 BOOT_IMAGE=/pkg/linux/x86_64-randconfig-014-20241107/gcc-12/0f9b685626daa2f8e19a9788625c9b624c223e45/vmlinuz-6.12.0-rc6-00146-g0f9b685626da branch=linux-next/master job=/lkp/jobs/scheduled/vm-meta-6/rcuscale-300s-srcu-debian-12-x86_64-20240206.cgz-x86_64-randconfig-014-20241107-0f9b685626da-20241108-49563-1ezn43f-0.yaml user=lkp ARCH=x86_64 kconfig=x86_64-randconfig-014-20241107 commit=0f9b685626daa2f8e19a9788625c9b624c223e45 intremap=posted_msi vmalloc=256M max_uptime=1200 LKP_SERVER=internal-lkp-server selinux=0 nmi_watchdog=panic prompt_ramdisk=0 vga=normal audit=0 riscv_isa_fallback=1", will be passed to user space. Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) Built 1 zonelists, mobility grouping on. Total pages: 4194174 mem auto-init: stack:off, heap alloc:on, heap free:on mem auto-init: clearing system memory may take some time... stackdepot: allocating hash table via alloc_large_system_hash stackdepot hash table entries: 1048576 (order: 12, 16777216 bytes, linear) software IO TLB: area num 1. ********************************************************** ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** ** ** ** This system shows unhashed kernel memory addresses ** ** via the console, logs, and other interfaces. This ** ** might reduce the security of your system. ** ** ** ** If you see this message and you are not debugging ** ** the kernel, report this immediately to your system ** ** administrator! ** ** ** ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** ********************************************************** SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 allocated 335544320 bytes of page_ext Node 0, zone DMA: page owner found early allocated 0 pages Node 0, zone DMA32: page owner found early allocated 0 pages Node 0, zone Normal: page owner found early allocated 82042 pages Dynamic Preempt: full Running RCU self tests Running RCU synchronous self tests rcu: Preemptible hierarchical RCU implementation. rcu: RCU event tracing is enabled. rcu: RCU lockdep checking is enabled. RCU CPU stall warnings timeout set to 100 (rcu_cpu_stall_timeout). Trampoline variant of Tasks RCU enabled. Rude variant of Tasks RCU enabled. Tracing variant of Tasks RCU enabled. rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies. Running RCU synchronous self tests RCU Tasks: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1. RCU Tasks Rude: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1. RCU Tasks Trace: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1. NR_IRQS: 4352, nr_irqs: 48, preallocated irqs: 16 rcu: srcu_init: Setting srcu_struct sizes based on contention. Console: colour VGA+ 80x25 printk: legacy console [tty0] enabled printk: legacy console [ttyS0] enabled printk: legacy bootconsole [earlyser0] disabled serial port 0 not yet initialized Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar ... MAX_LOCKDEP_SUBCLASSES: 8 ... MAX_LOCK_DEPTH: 48 ... MAX_LOCKDEP_KEYS: 8192 ... CLASSHASH_SIZE: 4096 ... MAX_LOCKDEP_ENTRIES: 32768 ... MAX_LOCKDEP_CHAINS: 65536 ... CHAINHASH_SIZE: 32768 memory used by lock dependency info: 6429 kB memory used for stack traces: 4224 kB per task-struct memory footprint: 1920 bytes ACPI: Core revision 20240827 clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns APIC: Switch to symmetric I/O mode setup Masked ExtINT on CPU#0 ENABLING IO-APIC IRQs Init IO_APIC IRQs apic 0 pin 0 not connected IOAPIC[0]: Preconfigured routing entry (0-1 -> IRQ 1 Level:0 ActiveLow:0) IOAPIC[0]: Preconfigured routing entry (0-2 -> IRQ 0 Level:0 ActiveLow:0) IOAPIC[0]: Preconfigured routing entry (0-3 -> IRQ 3 Level:0 ActiveLow:0) IOAPIC[0]: Preconfigured routing entry (0-4 -> IRQ 4 Level:0 ActiveLow:0) IOAPIC[0]: Preconfigured routing entry (0-5 -> IRQ 5 Level:1 ActiveLow:0) IOAPIC[0]: Preconfigured routing entry (0-6 -> IRQ 6 Level:0 ActiveLow:0) IOAPIC[0]: Preconfigured routing entry (0-7 -> IRQ 7 Level:0 ActiveLow:0) IOAPIC[0]: Preconfigured routing entry (0-8 -> IRQ 8 Level:0 ActiveLow:0) IOAPIC[0]: Preconfigured routing entry (0-9 -> IRQ 9 Level:1 ActiveLow:0) IOAPIC[0]: Preconfigured routing entry (0-10 -> IRQ 10 Level:1 ActiveLow:0) IOAPIC[0]: Preconfigured routing entry (0-11 -> IRQ 11 Level:1 ActiveLow:0) IOAPIC[0]: Preconfigured routing entry (0-12 -> IRQ 12 Level:0 ActiveLow:0) IOAPIC[0]: Preconfigured routing entry (0-13 -> IRQ 13 Level:0 ActiveLow:0) IOAPIC[0]: Preconfigured routing entry (0-14 -> IRQ 14 Level:0 ActiveLow:0) IOAPIC[0]: Preconfigured routing entry (0-15 -> IRQ 15 Level:0 ActiveLow:0) apic 0 pin 16 not connected apic 0 pin 17 not connected apic 0 pin 18 not connected apic 0 pin 19 not connected apic 0 pin 20 not connected apic 0 pin 21 not connected apic 0 pin 22 not connected apic 0 pin 23 not connected ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x29b38900952, max_idle_ns: 440795323692 ns Calibrating delay loop (skipped) preset value.. 5788.14 BogoMIPS (lpj=9643426) Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 CPU: Intel Xeon E312xx (Sandy Bridge) (family: 0x6, model: 0x2a, stepping: 0x1) Spectre V1 : Vulnerable: __user pointer sanitization and usercopy barriers only; no swapgs barriers Speculative Store Bypass: Vulnerable MDS: Vulnerable MMIO Stale Data: Unknown: No mitigations x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. pid_max: default: 32768 minimum: 301 LSM: initializing lsm=capability,landlock,yama landlock: Up and running. Yama: becoming mindful. Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) Running RCU synchronous self tests Running RCU synchronous self tests Running RCU Tasks wait API self tests Running RCU Tasks Rude wait API self tests Running RCU Tasks Trace wait API self tests Performance Events: unsupported p6 CPU model 42 no PMU driver, software events only. signal: max sigframe size: 1776 rcu: Hierarchical SRCU implementation. rcu: Max phase no-delay instances is 1000. Memory: 13636028K/16776696K available (59392K kernel code, 30865K rwdata, 29940K rodata, 3072K init, 14756K bss, 2805308K reserved, 0K cma-reserved) devtmpfs: initialized x86/mm: Memory block size: 128MB Callback from call_rcu_tasks_trace() invoked. Running RCU synchronous self tests Running RCU synchronous self tests clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns futex hash table entries: 256 (order: 2, 22528 bytes, linear) pinctrl core: initialized pinctrl subsystem pinctrl core: failed to create debugfs directory regulator: Failed to create debugfs directory regulator-dummy: no parameters, enabled regulator-dummy: Failed to create debugfs directory NET: Registered PF_NETLINK/PF_ROUTE protocol family thermal_sys: Registered thermal governor 'bang_bang' thermal_sys: Registered thermal governor 'step_wise' cpuidle: using governor menu PCI: Using configuration type 1 for base access kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. cryptd: max_cpu_qlen set to 1000 Callback from call_rcu_tasks() invoked. raid6: sse2x4 gen() 4187 MB/s raid6: sse2x2 gen() 3929 MB/s raid6: sse2x1 gen() 2505 MB/s raid6: using algorithm sse2x4 gen() 4187 MB/s raid6: .... xor() 2497 MB/s, rmw enabled raid6: using ssse3x2 recovery algorithm gpio-f7188x: Unsupported Fintek device 0xffff gpio-f7188x: Unsupported Fintek device 0xffff ACPI: Added _OSI(Module Device) ACPI: Added _OSI(Processor Device) ACPI: Added _OSI(3.0 _SCP Extensions) ACPI: Added _OSI(Processor Aggregator Device) ACPI: 1 ACPI AML tables successfully acquired and loaded ACPI: Interpreter enabled ACPI: PM: (supports S0 S5) ACPI: Using IOAPIC for interrupt routing PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug PCI: Using E820 reservations for host bridge windows ACPI: Enabled 2 GPEs in block 00 to 0F ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments HPX-Type3] acpi PNP0A03:00: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended configuration space under this bridge PCI host bridge to bus 0000:00 pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window] pci_bus 0000:00: root bus resource [mem 0x440000000-0x4bfffffff window] pci_bus 0000:00: root bus resource [bus 00-ff] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000 conventional PCI endpoint pci 0000:00:01.0: [8086:7000] type 00 class 0x060100 conventional PCI endpoint pci 0000:00:01.1: [8086:7010] type 00 class 0x010180 conventional PCI endpoint pci 0000:00:01.1: BAR 4 [io 0xc040-0xc04f] pci 0000:00:01.1: BAR 0 [io 0x01f0-0x01f7]: legacy IDE quirk pci 0000:00:01.1: BAR 1 [io 0x03f6]: legacy IDE quirk pci 0000:00:01.1: BAR 2 [io 0x0170-0x0177]: legacy IDE quirk pci 0000:00:01.1: BAR 3 [io 0x0376]: legacy IDE quirk pci 0000:00:01.3: [8086:7113] type 00 class 0x068000 conventional PCI endpoint pci 0000:00:01.3: quirk: [io 0x0600-0x063f] claimed by PIIX4 ACPI pci 0000:00:01.3: quirk: [io 0x0700-0x070f] claimed by PIIX4 SMB pci 0000:00:02.0: [1234:1111] type 00 class 0x030000 conventional PCI endpoint pci 0000:00:02.0: BAR 0 [mem 0xfd000000-0xfdffffff pref] pci 0000:00:02.0: BAR 2 [mem 0xfebf0000-0xfebf0fff] pci 0000:00:02.0: ROM [mem 0xfebe0000-0xfebeffff pref] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] pci 0000:00:03.0: [8086:100e] type 00 class 0x020000 conventional PCI endpoint pci 0000:00:03.0: BAR 0 [mem 0xfebc0000-0xfebdffff] pci 0000:00:03.0: BAR 1 [io 0xc000-0xc03f] pci 0000:00:03.0: ROM [mem 0xfeb80000-0xfebbffff pref] pci 0000:00:04.0: [8086:25ab] type 00 class 0x088000 conventional PCI endpoint pci 0000:00:04.0: BAR 0 [mem 0xfebf1000-0xfebf100f] pci_bus 0000:00: on NUMA node 0 ACPI: PCI: Interrupt link LNKA configured for IRQ 10 ACPI: PCI: Interrupt link LNKB configured for IRQ 10 ACPI: PCI: Interrupt link LNKC configured for IRQ 11 ACPI: PCI: Interrupt link LNKD configured for IRQ 11 ACPI: PCI: Interrupt link LNKS configured for IRQ 9 SCSI subsystem initialized libata version 3.00 loaded. cec: Failed to create debugfs cec dir pps_core: LinuxPPS API ver. 1 registered pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti PTP clock support registered EDAC MC: Ver: 3.0.0 EDAC DEBUG: edac_mc_sysfs_init: device mc created Advanced Linux Sound Architecture Driver Initialized. PCI: Using ACPI for IRQ routing PCI: pci_cache_line_size set to 64 bytes e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] e820: reserve RAM buffer [mem 0xbffe0000-0xbfffffff] pci 0000:00:02.0: vgaarb: setting as boot VGA device pci 0000:00:02.0: vgaarb: bridge control possible pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.4) Could not create 'lock_event_counts' debugfs entries clocksource: Switched to clocksource kvm-clock VFS: Disk quotas dquot_6.6.0 VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) netfs: FS-Cache loaded CacheFiles: Loaded pnp: PnP ACPI init pnp 00:02: [dma 2] pnp: PnP ACPI: found 7 devices clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns NET: Registered PF_INET protocol family IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) tcp_listen_portaddr_hash hash table entries: 8192 (order: 7, 589824 bytes, linear) Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear) TCP bind hash table entries: 65536 (order: 11, 9437184 bytes, vmalloc hugepage) TCP: Hash tables configured (established 131072 bind 65536) UDP hash table entries: 8192 (order: 8, 1310720 bytes, linear) UDP-Lite hash table entries: 8192 (order: 8, 1310720 bytes, linear) NET: Registered PF_UNIX/PF_LOCAL protocol family RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp-with-tls transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfebfffff window] pci_bus 0000:00: resource 8 [mem 0x440000000-0x4bfffffff window] pci 0000:00:01.0: PIIX3: Enabling Passive Release pci 0000:00:00.0: Limiting direct PCI/PCI transfers PCI: CLS 0 bytes, default 64 Unpacking initramfs... Freeing initrd memory: 169512K PCI-DMA: Using software bounce buffering for IO (SWIOTLB) software IO TLB: mapped [mem 0x00000000bbfe0000-0x00000000bffe0000] (64MB) ACPI: bus type thunderbolt registered RAPL PMU: API unit is 2^-32 Joules, 0 fixed counters, 10737418240 ms ovfl timer kvm_intel: VMX not supported by CPU 0 kvm_amd: CPU 0 isn't AMD or Hygon clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x29b38900952, max_idle_ns: 440795323692 ns AVX2 or AES-NI instructions are not detected. sm3_avx_x86_64: BMI2 instruction are not detected. AVX2 or AES-NI instructions are not detected. workingset: timestamp_bits=62 max_order=22 bucket_order=0 squashfs: version 4.0 (2009/01/31) Phillip Lougher ntfs3: Enabled Linux POSIX ACLs support ntfs3: Warning: Activated 64 bits per cluster. Windows does not support this ntfs3: Read-only LZX/Xpress compression included efs: 1.0a - http://aeschi.ch.eu.org/efs/ romfs: ROMFS MTD (C) 2007 Red Hat, Inc. QNX4 filesystem 0.2.3 registered. orangefs_debugfs_init: called with debug mask: :none: :0: orangefs_init: module version upstream loaded JFS: nTxBlock = 8192, nTxLock = 65536 SGI XFS with security attributes, scrub, repair, no debug enabled 9p: Installing v9fs 9p2000 file system support NILFS version 2 loaded befs: version: 0.9.3 gfs2: GFS2 installed xor: automatically using best checksumming function avx async_tx: api initialized (async) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 241) io scheduler mq-deadline registered io scheduler kyber registered io scheduler bfq registered gpio_virtuser: Failed to create the debugfs tree: -2 gpio_winbond: chip ID at 2e is ffff gpio_winbond: not an our chip gpio_winbond: chip ID at 4e is ffff gpio_winbond: not an our chip SPI driver leds_el15203000 has no spi_device_id for crane,el15203000 SPI driver leds_spi_byte has no spi_device_id for ubnt,acb-spi-led ledtrig-cpu: registered to indicate activity on CPUs shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 switchtec: loaded. VIA Graphics Integration Chipset framebuffer 2.4 initializing no IO addresses supplied input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 ACPI: button: Power Button [PWRF] N_HDLC line discipline registered with maxframe=4096 Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled 00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A Applicom driver: $Id: ac.c,v 1.30 2000/03/22 16:03:57 dwmw2 Exp $ ac.o: No PCI boards found. ac.o: For an ISA board you must supply memory and irq parameters. ppdev: user-space parallel port driver telclk_interrupt = 0xf non-mcpbl0010 hw. smapi::smapi_init, ERROR invalid usSmapiID mwave: tp3780i::tp3780I_InitializeBoardData: Error: SMAPI is not available on this machine mwave: mwavedd::mwave_init: Error: Failed to initialize board data mwave: mwavedd::mwave_init: Error: Failed to initialize Linux agpgart interface v0.103 Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds). Phantom Linux Driver, version n0.9.8, init OK Silicon Labs C2 port support v. 0.51.0 - (C) 2007 Rodolfo Giometti c2port c2port0: C2 port uc added c2port c2port0: uc flash has 30 blocks x 512 bytes (15360 bytes total) Guest personality initialized and is inactive VMCI host device registered (name=vmci, major=10, minor=122) Initialized host personality SPI driver tps6594 has no spi_device_id for ti,tps6594-q1 SPI driver tps6594 has no spi_device_id for ti,tps6593-q1 SPI driver tps6594 has no spi_device_id for ti,lp8764-q1 SPI driver tps6594 has no spi_device_id for ti,tps65224-q1 snic:Cisco SCSI NIC Driver, ver 0.0.1.18 Adaptec aacraid driver 1.2.1[50983]-custom aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded Microchip SmartPQI Driver (v2.1.30-031) megasas: 07.727.03.00-rc1 mpt3sas version 48.100.00.00 loaded Loading mpi3mr version 8.12.0.0.50 3ware 9000 Storage Controller device driver for Linux v2.26.02.014. LSI 3ware SAS/SATA-RAID Controller device driver for Linux v3.26.02.000. stex: Promise SuperTrak EX Driver version: 6.02.0000.01 VMware PVSCSI driver - version 1.0.7.0-k st: Version 20160209, fixed bufsize 32768, s/g segs 256 SCSI Media Changer driver v0.25 scsi_debug:scsi_debug_init: scsi_debug_init: failed to create initial debugfs directory scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1) scsi host0: scsi_debug: version 0191 [20210520] dev_size_mb=8, opts=0x0, submit_queues=1, statistics=0 scsi 0:0:0:0: Direct-Access Linux scsi_debug 0191 PQ: 0 ANSI: 7 scsi_debug:scsi_debug_slave_configure: scsi_debug_slave_configure: failed to create debugfs directory for device 0:0:0:0 scsi_debug:scsi_debug_slave_configure: scsi_debug_slave_configure: failed to create error file for device 0:0:0:0 scsi 0:0:0:0: Power-on or device reset occurred sd 0:0:0:0: Attached scsi generic sg0 type 0 Rounding down aligned max_sectors from 4294967295 to 4294967288 db_root: cannot open: /etc/target sd 0:0:0:0: [sda] 16384 512-byte logical blocks: (8.39 MB/8.00 MiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 73 00 10 08 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA HSI/SSI char device loaded e1000: Intel(R) PRO/1000 Network Driver e1000: Copyright (c) 1999-2006 Intel Corporation. sd 0:0:0:0: [sda] permanent stream count = 5 sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes sd 0:0:0:0: [sda] Optimal transfer size 524288 bytes sd 0:0:0:0: [sda] Attached SCSI disk ACPI: \_SB_.LNKC: Enabled at IRQ 11 e1000 0000:00:03.0 eth0: (PCI:33MHz:32-bit) 52:54:00:12:34:56 e1000 0000:00:03.0 eth0: Intel(R) PRO/1000 Network Connection i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mousedev: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 apanel: Fujitsu BIOS signature 'FJKEYINF' not found... input: PC Speaker as /devices/platform/pcspkr/input/input2 i2c_dev: i2c /dev entries driver piix4_smbus 0000:00:01.3: SMBus Host Controller at 0x700, revision 0 i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD Driver for 1-wire Dallas network protocol. applesmc: supported laptop not found! applesmc: driver init failed (ret=-19)! f71882fg: Not a Fintek device f71882fg: Not a Fintek device input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input4 pc87360: PC8736x not detected, module not inserted device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev device-mapper: multipath round-robin: version 1.2.0 loaded device-mapper: multipath queue-length: version 0.2.0 loaded device-mapper: multipath service-time: version 0.3.0 loaded device-mapper: multipath historical-service-time: version 0.1.1 loaded EDAC DEBUG: i3200_init: i3200 pci_get_device fail EDAC DEBUG: ie31200_init: ie31200 pci_get_device fail intel_pstate: CPU model not supported sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman wbsd: Winbond W83L51xD SD/MMC card interface driver wbsd: Copyright(c) Pierre Ossman vme_user: VME User Space Access Driver vme_user: No cards, skipping registration Board is not the VME system controller VME geographical address is set to 0 CR/CSR Offset: 0 no options. SPI driver fb_pcd8544 has no spi_device_id for philips,pcd8544 SPI driver fb_s6d02a1 has no spi_device_id for samsung,s6d02a1 SPI driver fb_ssd1289 has no spi_device_id for solomon,ssd1289 SPI driver fb_ssd1305 has no spi_device_id for solomon,ssd1305 SPI driver fb_ssd1306 has no spi_device_id for solomon,ssd1306 SPI driver fb_ssd1325 has no spi_device_id for solomon,ssd1325 SPI driver fb_st7735r has no spi_device_id for sitronix,st7735r SPI driver fb_tinylcd has no spi_device_id for neosec,tinylcd SPI driver fb_tls8204 has no spi_device_id for teralane,tls8204 SPI driver fb_uc1611 has no spi_device_id for ultrachip,uc1611 SPI driver fb_upd161704 has no spi_device_id for nec,upd161704 greybus: registered new driver bootrom greybus: registered new driver lights greybus: registered new driver loopback greybus: registered new driver raw greybus: registered new driver vibrator axis-fifo driver loaded with parameters read_timeout = 300, write_timeout = 300 dell_smbios: Unable to run on non-Dell system hdaps: supported laptop not found! hdaps: driver init failed (ret=-19)! ASIHPI driver 4.14.03 NET: Registered PF_INET6 protocol family Segment Routing with IPv6 In-situ OAM (IOAM) with IPv6 sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver NET: Registered PF_PACKET protocol family 9pnet: Installing 9P2000 support ... APIC ID: 00000000 (0) ... APIC VERSION: 00050014 0000000000000000000000000000000000000000000000000000000000000000 0000000000000000000000000000000000000000000000000000000000001000 number of MP IRQ sources: 15. number of IO-APIC #0 registers: 24. testing the IO APIC....................... IO APIC #0...... .... register #00: 00000000 ....... : physical APIC id: 00 ....... : Delivery Type: 0 ....... : LTS : 0 .... register #01: 00170011 ....... : max redirection entries: 17 ....... : PRQ implemented: 0 ....... : IO APIC version: 11 .... register #02: 00000000 ....... : arbitration: 00 .... IRQ redirection table: IOAPIC 0: pin00, disabled, edge , high, V(00), IRR(0), S(0), physic al, D(0000), M(0) pin01, enabled , edge , high, V(22), IRR(0), S(0), physic al, D(0000), M(0) pin02, enabled , edge , high, V(30), IRR(0), S(0), physic al, D(0000), M(0) pin03, disabled, edge , high, V(00), IRR(0), S(0), physic al, D(0000), M(0) pin04, disabled, edge , high, V(00), IRR(0), S(0), physic al, D(0000), M(0) pin05, disabled, edge , high, V(00), IRR(0), S(0), physic al, D(0000), M(0) pin06, disabled, edge , high, V(00), IRR(0), S(0), physic al, D(0000), M(0) pin07, disabled, edge , high, V(00), IRR(0), S(0), physic al, D(0000), M(0) pin08, disabled, edge , high, V(00), IRR(0), S(0), physic al, D(0000), M(0) pin09, enabled , level, high, V(20), IRR(0), S(0), physic al, D(0000), M(0) pin0a, disabled, edge , high, V(00), IRR(0), S(0), physic al, D(0000), M(0) pin0b, disabled, edge , high, V(00), IRR(0), S(0), physic al, D(0000), M(0) pin0c, enabled , edge , high, V(21), IRR(0), S(0), physic al, D(0000), M(0) pin0d, disabled, edge , high, V(00), IRR(0), S(0), physic al, D(0000), M(0) pin0e, disabled, edge , high, V(00), IRR(0), S(0), physic al, D(0000), M(0) pin0f, disabled, edge , high, V(00), IRR(0), S(0), physic al, D(0000), M(0) pin10, disabled, edge , high, V(00), IRR(0), S(0), physic al, D(0000), M(0) pin11, disabled, edge , high, V(00), IRR(0), S(0), physic al, D(0000), M(0) pin12, disabled, edge , high, V(00), IRR(0), S(0), physic al, D(0000), M(0) pin13, disabled, edge , high, V(00), IRR(0), S(0), physic al, D(0000), M(0) pin14, disabled, edge , high, V(00), IRR(0), S(0), physic al, D(0000), M(0) pin15, disabled, edge , high, V(00), IRR(0), S(0), physic al, D(0000), M(0) pin16, disabled, edge , high, V(00), IRR(0), S(0), physic al, D(0000), M(0) pin17, disabled, edge , high, V(00), IRR(0), S(0), physic al, D(0000), M(0) IRQ to pin mappings: IRQ0 -> 0:2 IRQ1 -> 0:1 IRQ3 -> 0:3 IRQ4 -> 0:4 IRQ5 -> 0:5 IRQ6 -> 0:6 IRQ7 -> 0:7 IRQ8 -> 0:8 IRQ9 -> 0:9 IRQ10 -> 0:10 IRQ11 -> 0:11 IRQ12 -> 0:12 IRQ13 -> 0:13 IRQ14 -> 0:14 IRQ15 -> 0:15 .................................... done. sched_clock: Marking stable (246506720826, 368635541)->(247123424715, -248068348) Key type .fscrypt registered Key type fscrypt-provisioning registered Btrfs loaded, ref-verify=on, zoned=no, fsverity=yes Key type big_key registered e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX Sending DHCP requests ., OK IP-Config: Got DHCP answer from 10.0.2.2, my address is 10.0.2.15 IP-Config: Complete: device=eth0, hwaddr=52:54:00:12:34:56, ipaddr=10.0.2.15, mask=255.255.255.0, gw=10.0.2.2 host=vm-meta-6, domain=, nis-domain=(none) bootserver=10.0.2.2, rootserver=10.0.2.2, rootpath= nameserver0=10.0.2.3 clk: Disabling unused clocks ALSA device list: No soundcards found. Freeing unused kernel image (initmem) memory: 3072K Write protecting the kernel read-only data: 90112k Freeing unused kernel image (rodata/data gap) memory: 780K x86/mm: Checked W+X mappings: passed, no W+X pages found. Run /init as init process with arguments: /init with environment: HOME=/ TERM=linux RESULT_ROOT=/result/rcuscale/300s-srcu/vm-snb/debian-12-x86_64-20240206.cgz/x86_64-randconfig-014-20241107/gcc-12/0f9b685626daa2f8e19a9788625c9b624c223e45/0 BOOT_IMAGE=/pkg/linux/x86_64-randconfig-014-20241107/gcc-12/0f9b685626daa2f8e19a9788625c9b624c223e45/vmlinuz-6.12.0-rc6-00146-g0f9b685626da branch=linux-next/master job=/lkp/jobs/scheduled/vm-meta-6/rcuscale-300s-srcu-debian-12-x86_64-20240206.cgz-x86_64-randconfig-014-20241107-0f9b685626da-20241108-49563-1ezn43f-0.yaml user=lkp ARCH=x86_64 kconfig=x86_64-randconfig-014-20241107 commit=0f9b685626daa2f8e19a9788625c9b624c223e45 intremap=posted_msi vmalloc=256M max_uptime=1200 LKP_SERVER=internal-lkp-server selinux=0 nmi_watchdog=panic prompt_ramdisk=0 vga=normal audit=0 riscv_isa_fallback=1 systemd[1]: RTC configured in localtime, applying delta of 0 minutes to system time. systemd[1]: Failed to find module 'autofs4' Welcome to Debian GNU/Linux 12 (bookworm)! Created slice system-getty.slice - Slice /system/getty. Created slice user.slice - User and Session Slice. Reached target paths.target - Path Units. Reached target slices.target - Slice Units. Reached target swap.target - Swaps. Listening on systemd-journald.socket - Journal Socket. Starting modprobe@drm.service - Load Kernel Module drm... Starting systemd-journald.service - Journal Service... Finished modprobe@drm.service - Load Kernel Module drm. Finished modprobe@fuse.service - Load Kernel Module fuse. Finished modprobe@loop.service - Load Kernel Module loop. Finished systemd-sysctl.service - Apply Kernel Variables. Finished systemd-sysusers.service - Create System Users. Started systemd-journald.service - Journal Service. random: crng init done Reached target local-fs.target - Local File Systems. Mounting run-rpc_pipefs.mount - RPC Pipe File System... Starting rpcbind.service - RPC bind portmap service... Mounted run-rpc_pipefs.mount - RPC Pipe File System. Reached target rpc_pipefs.target. Reached target nfs-client.target - NFS client services. Started rpcbind.service - RPC bind portmap service. Reached target remote-fs.target - Remote File Systems. Reached target rpcbind.target - RPC Port Mapper. Job systemd-udev-trigger.service/start running (7s / no limit) Reached target sysinit.target - System Initialization. Started apt-daily.timer - Daily apt download activities. Started fstrim.timer - Discard unused blocks once a week. Started logrotate.timer - Daily rotation of log files. Reached target timers.target - Timer Units. Reached target sockets.target - Socket Units. Reached target basic.target - Basic System. Starting dbus.service - D-Bus System Message Bus... Starting networking.service - Raise network interfaces... Started dbus.service - D-Bus System Message Bus. See 'systemctl status openipmi.service' for details. Started systemd-logind.service - User Login Management. Finished networking.service - Raise network interfaces. Reached target network.target - Network. Reached target network-online.target - Network is Online. Starting lkp-bootstrap.service - LKP bootstrap... Starting ssh.service - OpenBSD Secure Shell server... Started lkp-bootstrap.service - LKP bootstrap. LKP: ttyS0: 217: skip deploy intel ucode as no ucode is specified Started ssh.service - OpenBSD Secure Shell server. LKP: ttyS0: 217: Kernel tests: Boot OK! LKP: ttyS0: 217: HOSTNAME vm-snb, MAC 52:54:00:12:34:56, kernel 6.12.0-rc6-00146-g0f9b685626da 1 LKP: ttyS0: 217: /lkp/lkp/src/bin/run-lkp /lkp/jobs/scheduled/vm-meta-6/rcuscale-300s-srcu-debian-12-x86_64-20240206.cgz-x86_64-randconfig-014-20241107-0f9b685626da-20241108-49563-1ezn43f-0.yaml process 'src/bin/event/wakeup' started with executable stack ================================================================== BUG: KASAN: vmalloc-out-of-bounds in move_module+0x485/0x5a4 Write of size 40 at addr ffffffffa0000000 by task modprobe/399 CPU: 0 UID: 0 PID: 399 Comm: modprobe Tainted: G T 6.12.0-rc6-00146-g0f9b685626da #1 87c8486a909ba2f90eff061a4c9c1fa5c9cd90ea Tainted: [T]=RANDSTRUCT Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-debian-1.16.2-1 04/01/2014 Call Trace: print_address_description+0x65/0x2fa print_report+0x10a/0x1fc ? move_module+0x485/0x5a4 kasan_report+0x8d/0xbb ? move_module+0x485/0x5a4 kasan_check_range+0x138/0x156 __asan_memcpy+0x3c/0x65 move_module+0x485/0x5a4 layout_and_allocate+0x446/0x523 load_module+0x52/0x1102 ? mode_strip_umask+0xa8/0xa8 init_module_from_file+0xd3/0x122 ? __ia32_sys_init_module+0x81/0x81 ? __lock_release+0x106/0x38c ? idempotent_init_module+0x27d/0x564 ? lock_release+0x17c/0x1b1 idempotent_init_module+0x2a0/0x564 ? init_module_from_file+0x122/0x122 ? security_capable+0x21/0x6c __do_sys_finit_module+0x63/0x8c do_syscall_64+0x96/0x109 entry_SYSCALL_64_after_hwframe+0x6b/0x73 RIP: 0033:0x7fe8bd791719 Code: 08 89 e8 5b 5d c3 66 2e 0f 1f 84 00 00 00 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d b7 06 0d 00 f7 d8 64 89 01 48 RSP: 002b:00007ffc3095d018 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 RAX: ffffffffffffffda RBX: 0000561eae6ffdd0 RCX: 00007fe8bd791719 RDX: 0000000000000000 RSI: 0000561eae6f44a0 RDI: 0000000000000004 RBP: 0000561eae6f44a0 R08: 0000000000000000 R09: 0000561eae701250 R10: 0000000000000004 R11: 0000000000000246 R12: 0000000000040000 R13: 0000000000000000 R14: 0000561eae6ffd80 R15: 0000000000000000 Memory state around the buggy address: BUG: unable to handle page fault for address: fffffbfff3ffffe0 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 417fdb067 P4D 417fdb067 PUD 417fd7067 PMD 0 Oops: Oops: 0000 [#1] PREEMPT KASAN CPU: 0 UID: 0 PID: 399 Comm: modprobe Tainted: G T 6.12.0-rc6-00146-g0f9b685626da #1 87c8486a909ba2f90eff061a4c9c1fa5c9cd90ea Tainted: [T]=RANDSTRUCT Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-debian-1.16.2-1 04/01/2014 RIP: 0010:kasan_metadata_fetch_row+0x14/0x2d Code: 40 08 48 89 43 58 5b 31 c0 31 d2 31 c9 31 f6 31 ff c3 cc cc cc cc 66 0f 1f 00 b8 ff ff 37 00 48 c1 ee 03 48 c1 e0 2a 48 01 c6 <48> 8b 06 48 89 07 48 8b 46 08 48 89 47 08 31 c0 31 f6 31 ff c3 cc RSP: 0000:ffffc9000232f9f8 EFLAGS: 00010082 RAX: dffffc0000000000 RBX: ffffffff9fffff00 RCX: 0000000000000000 RDX: 0000000000000000 RSI: fffffbfff3ffffe0 RDI: ffffc9000232fa04 RBP: 00000000fffffffe R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffffffffa0000000 R13: ffffffff864b4994 R14: ffffffff9fffff80 R15: 0000000000000028 FS: 00007fe8bd68f040(0000) GS:ffffffff86989000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: fffffbfff3ffffe0 CR3: 0000000128ff2000 CR4: 00000000000406b0 Call Trace: ? __die_body+0x19/0x67 ? page_fault_oops+0x17c/0x1f8 ? show_fault_oops+0x4bd/0x4bd ? search_module_extables+0x16/0x9f ? fixup_exception+0x50/0x5ec ? exc_page_fault+0xa1/0xda ? asm_exc_page_fault+0x26/0x30 ? kasan_metadata_fetch_row+0x14/0x2d print_report+0x160/0x1fc ? move_module+0x485/0x5a4 kasan_report+0x8d/0xbb ? move_module+0x485/0x5a4 kasan_check_range+0x138/0x156 __asan_memcpy+0x3c/0x65 move_module+0x485/0x5a4 layout_and_allocate+0x446/0x523 load_module+0x52/0x1102 ? mode_strip_umask+0xa8/0xa8 init_module_from_file+0xd3/0x122 ? __ia32_sys_init_module+0x81/0x81 ? __lock_release+0x106/0x38c ? idempotent_init_module+0x27d/0x564 ? lock_release+0x17c/0x1b1 idempotent_init_module+0x2a0/0x564 ? init_module_from_file+0x122/0x122 ? security_capable+0x21/0x6c __do_sys_finit_module+0x63/0x8c do_syscall_64+0x96/0x109 entry_SYSCALL_64_after_hwframe+0x6b/0x73 RIP: 0033:0x7fe8bd791719 Code: 08 89 e8 5b 5d c3 66 2e 0f 1f 84 00 00 00 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d b7 06 0d 00 f7 d8 64 89 01 48 RSP: 002b:00007ffc3095d018 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 RAX: ffffffffffffffda RBX: 0000561eae6ffdd0 RCX: 00007fe8bd791719 RDX: 0000000000000000 RSI: 0000561eae6f44a0 RDI: 0000000000000004 RBP: 0000561eae6f44a0 R08: 0000000000000000 R09: 0000561eae701250 R10: 0000000000000004 R11: 0000000000000246 R12: 0000000000040000 R13: 0000000000000000 R14: 0000561eae6ffd80 R15: 0000000000000000 Modules linked in: CR2: fffffbfff3ffffe0 ---[ end trace 0000000000000000 ]--- RIP: 0010:kasan_metadata_fetch_row+0x14/0x2d Code: 40 08 48 89 43 58 5b 31 c0 31 d2 31 c9 31 f6 31 ff c3 cc cc cc cc 66 0f 1f 00 b8 ff ff 37 00 48 c1 ee 03 48 c1 e0 2a 48 01 c6 <48> 8b 06 48 89 07 48 8b 46 08 48 89 47 08 31 c0 31 f6 31 ff c3 cc RSP: 0000:ffffc9000232f9f8 EFLAGS: 00010082 RAX: dffffc0000000000 RBX: ffffffff9fffff00 RCX: 0000000000000000 RDX: 0000000000000000 RSI: fffffbfff3ffffe0 RDI: ffffc9000232fa04 RBP: 00000000fffffffe R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffffffffa0000000 R13: ffffffff864b4994 R14: ffffffff9fffff80 R15: 0000000000000028 FS: 00007fe8bd68f040(0000) GS:ffffffff86989000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: fffffbfff3ffffe0 CR3: 0000000128ff2000 CR4: 00000000000406b0 Kernel panic - not syncing: Fatal exception Kernel Offset: disabled Kboot worker: lkp-worker14 Elapsed time: 300 kvm=( qemu-system-x86_64 -enable-kvm -cpu SandyBridge -kernel $kernel -initrd initrd-vm-meta-6.cgz -m 16384 -smp 2 -device e1000,netdev=net0 -netdev user,id=net0,hostfwd=tcp::32032-:22 -boot order=nc -no-reboot -device i6300esb -watchdog-action debug -rtc base=localtime -serial stdio -display none -monitor null ) append=( ip=::::vm-meta-6::dhcp root=/dev/ram0 RESULT_ROOT=/result/rcuscale/300s-srcu/vm-snb/debian-12-x86_64-20240206.cgz/x86_64-randconfig-014-20241107/gcc-12/0f9b685626daa2f8e19a9788625c9b624c223e45/0 BOOT_IMAGE=/pkg/linux/x86_64-randconfig-014-20241107/gcc-12/0f9b685626daa2f8e19a9788625c9b624c223e45/vmlinuz-6.12.0-rc6-00146-g0f9b685626da branch=linux-next/master job=/job-script user=lkp ARCH=x86_64 kconfig=x86_64-randconfig-014-20241107 commit=0f9b685626daa2f8e19a9788625c9b624c223e45 intremap=posted_msi vmalloc=256M initramfs_async=0 page_owner=on carrier_timeout=60 max_uptime=1200 result_service=tmpfs selinux=0 debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 net.ifnames=0 printk.devkmsg=on panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 drbd.minor_count=8 systemd.log_level=err ignore_loglevel console=tty0 earlyprintk=ttyS0,115200 console=ttyS0,115200 vga=normal rw rcuperf.shutdown=0 rcuscale.shutdown=0 refscale.shutdown=0 watchdog_thresh=240 audit=0 kunit.enable=0 ia32_emulation=on riscv_isa_fallback=1 ) "${kvm[@]}" -append "${append[*]}"