early console in setup code Probing EDD (edd=off to disable)... ok early console in extract_kernel input_data: 0x031f6079 input_len: 0x018396bc output: 0x01000000 output_len: 0x0319e610 kernel_total_size: 0x03a47000 needed_size: 0x03a47000 Decompressing Linux... Parsing ELF... done. Booting the kernel (entry_offset: 0x00000000). Linux version 6.13.0-rc2-00014-gb04e317b5226 (kbuild@2033ad2ed119) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT Tue Feb 11 19:13:33 CST 2025 KERNEL supported cpus: AMD AuthenticAMD zhaoxin Shanghai CPU: vendor_id 'GenuineIntel' unknown, using generic init. CPU: Your system may be unstable. BIOS-provided physical RAM map: BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved BIOS-e820: [mem 0x0000000000100000-0x00000000bffdffff] usable BIOS-e820: [mem 0x00000000bffe0000-0x00000000bfffffff] reserved BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved BIOS-e820: [mem 0x0000000100000000-0x000000043fffffff] usable e820: remove [mem 0x100000000-0xfffffffffffffffe] usable printk: debug: ignoring loglevel setting. printk: legacy bootconsole [earlyser0] enabled e820: remove [mem 0x100000000-0xfffffffffffffffe] usable Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel! APIC: Static calls initialized user-defined physical RAM map: user: [mem 0x0000000000000000-0x000000000009fbff] usable user: [mem 0x000000000009fc00-0x000000000009ffff] reserved user: [mem 0x00000000000f0000-0x00000000000fffff] reserved user: [mem 0x0000000000100000-0x00000000bffdffff] usable user: [mem 0x00000000bffe0000-0x00000000bfffffff] reserved user: [mem 0x00000000feffc000-0x00000000feffffff] reserved user: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved SMBIOS 2.8 present. DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-debian-1.16.2-1 04/01/2014 DMI: Memory slots populated: 1/1 Hypervisor detected: KVM kvm-clock: Using msrs 4b564d01 and 4b564d00 kvm-clock: using sched offset of 6346804561 cycles clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns tsc: Detected 2260.998 MHz processor e820: update [mem 0x00000000-0x00000fff] usable ==> reserved e820: remove [mem 0x000a0000-0x000fffff] usable last_pfn = 0xbffe0 max_arch_pfn = 0x100000 MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT Scan for SMP in [mem 0x00000000-0x000003ff] Scan for SMP in [mem 0x0009fc00-0x0009ffff] Scan for SMP in [mem 0x000f0000-0x000fffff] found SMP MP-table at [mem 0x000f5ba0-0x000f5baf] mpc: f5bb0-f5c80 initial memory mapped: [mem 0x00000000-0x04bfffff] RAMDISK: [mem 0x7a623000-0x7fffffff] Allocated new RAMDISK: [mem 0x28a21000-0x2e3fd206] Move RAMDISK from [mem 0x7a623000-0x7ffff206] to [mem 0x28a21000-0x2e3fd206] ACPI: Early table checksum verification disabled ACPI: RSDP 0x00000000000F59B0 000014 (v00 BOCHS ) ACPI: RSDT 0x00000000BFFE1B56 000034 (v01 BOCHS BXPC 00000001 BXPC 00000001) ACPI: FACP 0x00000000BFFE1A02 000074 (v01 BOCHS BXPC 00000001 BXPC 00000001) ACPI: DSDT 0x00000000BFFE0040 0019C2 (v01 BOCHS BXPC 00000001 BXPC 00000001) ACPI: FACS 0x00000000BFFE0000 000040 ACPI: APIC 0x00000000BFFE1A76 000080 (v01 BOCHS BXPC 00000001 BXPC 00000001) ACPI: HPET 0x00000000BFFE1AF6 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001) ACPI: WAET 0x00000000BFFE1B2E 000028 (v01 BOCHS BXPC 00000001 BXPC 00000001) ACPI: Reserving FACP table memory at [mem 0xbffe1a02-0xbffe1a75] ACPI: Reserving DSDT table memory at [mem 0xbffe0040-0xbffe1a01] ACPI: Reserving FACS table memory at [mem 0xbffe0000-0xbffe003f] ACPI: Reserving APIC table memory at [mem 0xbffe1a76-0xbffe1af5] ACPI: Reserving HPET table memory at [mem 0xbffe1af6-0xbffe1b2d] ACPI: Reserving WAET table memory at [mem 0xbffe1b2e-0xbffe1b55] Mapped APIC to ffffc000 ( fee00000) Limiting to 8 possible CPUs 2331MB HIGHMEM available. 739MB LOWMEM available. mapped low ram: 0 - 2e3fe000 low ram: 0 - 2e3fe000 Zone ranges: Normal [mem 0x0000000000001000-0x000000002e3fdfff] HighMem [mem 0x000000002e3fe000-0x00000000bffdffff] Movable zone start for each node Early memory node ranges node 0: [mem 0x0000000000001000-0x000000000009efff] node 0: [mem 0x0000000000100000-0x00000000bffdffff] Initmem setup node 0 [mem 0x0000000000001000-0x00000000bffdffff] On node 0, zone Normal: 1 pages in unavailable ranges On node 0, zone Normal: 97 pages in unavailable ranges ACPI: PM-Timer IO Port: 0x608 ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 0, APIC INT 02 ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) Int: type 0, pol 1, trig 3, bus 00, IRQ 05, APIC ID 0, APIC INT 05 ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 0, APIC INT 09 ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) Int: type 0, pol 1, trig 3, bus 00, IRQ 0a, APIC ID 0, APIC INT 0a ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) Int: type 0, pol 1, trig 3, bus 00, IRQ 0b, APIC ID 0, APIC INT 0b Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 0, APIC INT 01 Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 0, APIC INT 03 Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 0, APIC INT 04 Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 0, APIC INT 06 Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 0, APIC INT 07 Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 0, APIC INT 08 Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 0, APIC INT 0c Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 0, APIC INT 0d Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 0, APIC INT 0e Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 0, APIC INT 0f ACPI: Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8086a201 base: 0xfed00000 TSC deadline timer available CPU topo: Max. logical packages: 2 CPU topo: Max. logical dies: 2 CPU topo: Max. dies per package: 1 CPU topo: Max. threads per core: 1 CPU topo: Num. cores per package: 1 CPU topo: Num. threads per package: 1 CPU topo: Allowing 2 present CPUs plus 0 hotplug CPUs mapped IOAPIC to ffffb000 (fec00000) kvm-guest: APIC: eoi() replaced with kvm_guest_apic_eoi_write() [mem 0xc0000000-0xfeffbfff] available for PCI devices Booting paravirtualized kernel on KVM clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns setup_percpu: NR_CPUS:32 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1 percpu: Embedded 29 pages/cpu s88108 r0 d30676 u118784 pcpu-alloc: s88108 r0 d30676 u118784 alloc=29*4096 pcpu-alloc: [0] 0 [0] 1 Kernel command line: ip=::::vm-meta-99::dhcp root=/dev/ram0 RESULT_ROOT=/result/rcuscale/300s-rcu/vm-snb/debian-11.1-i386-20220923.cgz/i386-randconfig-052-20250205/gcc-12/b04e317b522630b46f78ee62ecbdc5734e8d43de/153 BOOT_IMAGE=/pkg/linux/i386-randconfig-052-20250205/gcc-12/b04e317b522630b46f78ee62ecbdc5734e8d43de/vmlinuz-6.13.0-rc2-00014-gb04e317b5226 branch=linux-devel/devel-hourly-20250204-222340 job=/lkp/jobs/scheduled/vm-meta-99/rcuscale-300s-rcu-debian-11.1-i386-20220923.cgz-i386-randconfig-052-20250205-b04e317b5226-20250211-1026503-1mxtlrf-569.yaml user=lkp ARCH=i386 kconfig=i386-randconfig-052-20250205 commit=b04e317b522630b46f78ee62ecbdc5734e8d43de mem=4G intremap=posted_msi vmalloc=256M initramfs_async=0 page_owner=on carrier_timeout=60 rcupdate.rcu_self_test=0 max_uptime=1200 LKP_SERVER=internal-lkp-server selinux=0 debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 net.ifnames=0 printk.devkmsg=on panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 promp sysrq: sysrq always enabled. ignoring the deprecated load_ramdisk= option audit: disabled (until reboot) Unknown kernel command line parameters "RESULT_ROOT=/result/rcuscale/300s-rcu/vm-snb/debian-11.1-i386-20220923.cgz/i386-randconfig-052-20250205/gcc-12/b04e317b522630b46f78ee62ecbdc5734e8d43de/153 BOOT_IMAGE=/pkg/linux/i386-randconfig-052-20250205/gcc-12/b04e317b522630b46f78ee62ecbdc5734e8d43de/vmlinuz-6.13.0-rc2-00014-gb04e317b5226 branch=linux-devel/devel-hourly-20250204-222340 job=/lkp/jobs/scheduled/vm-meta-99/rcuscale-300s-rcu-debian-11.1-i386-20220923.cgz-i386-randconfig-052-20250205-b04e317b5226-20250211-1026503-1mxtlrf-569.yaml user=lkp ARCH=i386 kconfig=i386-randconfig-052-20250205 commit=b04e317b522630b46f78ee62ecbdc5734e8d43de intremap=posted_msi max_uptime=1200 LKP_SERVER=internal-lkp-server selinux=0 prompt_ramdisk=0 vga=normal ia32_emulation=on riscv_isa_fallback=1", will be passed to user space. printk: log buffer data + meta data: 1048576 + 3276800 = 4325376 bytes Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) Built 1 zonelists, mobility grouping on. Total pages: 786302 allocated 53544764 bytes of page_ext mem auto-init: stack:off, heap alloc:on, heap free:on mem auto-init: clearing system memory may take some time... stackdepot: allocating hash table via alloc_large_system_hash stackdepot hash table entries: 65536 (order: 7, 524288 bytes, linear) Initializing HighMem for node 0 (0002e3fe:000bffe0) Initializing Movable for node 0 (00000000:00000000) Checking if this processor honours the WP bit even in supervisor mode...Ok. SLUB: HWalign=64, Order=0-1, MinObjects=0, CPUs=2, Nodes=1 Node 0, zone Normal: page owner found early allocated 10 pages Node 0, zone HighMem: page owner found early allocated 0 pages trace event string verifier disabled Running RCU self tests Running RCU synchronous self tests rcu: Preemptible hierarchical RCU implementation. rcu: RCU lockdep checking is enabled. rcu: RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=2. RCU CPU stall warnings timeout set to 100 (rcu_cpu_stall_timeout). Trampoline variant of Tasks RCU enabled. Rude variant of Tasks RCU enabled. Tracing variant of Tasks RCU enabled. rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 Running RCU synchronous self tests RCU Tasks: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=2. RCU Tasks Rude: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=2. RCU Tasks Trace: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=2. NR_IRQS: 2304, nr_irqs: 440, preallocated irqs: 16 rcu: srcu_init: Setting srcu_struct sizes based on contention. printk: legacy console [ttyS0] enabled printk: legacy bootconsole [earlyser0] disabled Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar ... MAX_LOCKDEP_SUBCLASSES: 8 ... MAX_LOCK_DEPTH: 48 ... MAX_LOCKDEP_KEYS: 8192 ... CLASSHASH_SIZE: 4096 ... MAX_LOCKDEP_ENTRIES: 32768 ... MAX_LOCKDEP_CHAINS: 65536 ... CHAINHASH_SIZE: 32768 memory used by lock dependency info: 3869 kB memory used for stack traces: 2112 kB per task-struct memory footprint: 1344 bytes ACPI: Core revision 20240827 clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns APIC: Switch to symmetric I/O mode setup Masked ExtINT on CPU#0 ENABLING IO-APIC IRQs Init IO_APIC IRQs apic 0 pin 0 not connected IOAPIC[0]: Preconfigured routing entry (0-1 -> IRQ 1 Level:0 ActiveLow:0) IOAPIC[0]: Preconfigured routing entry (0-2 -> IRQ 0 Level:0 ActiveLow:0) IOAPIC[0]: Preconfigured routing entry (0-3 -> IRQ 3 Level:0 ActiveLow:0) IOAPIC[0]: Preconfigured routing entry (0-4 -> IRQ 4 Level:0 ActiveLow:0) IOAPIC[0]: Preconfigured routing entry (0-5 -> IRQ 5 Level:1 ActiveLow:0) IOAPIC[0]: Preconfigured routing entry (0-6 -> IRQ 6 Level:0 ActiveLow:0) IOAPIC[0]: Preconfigured routing entry (0-7 -> IRQ 7 Level:0 ActiveLow:0) IOAPIC[0]: Preconfigured routing entry (0-8 -> IRQ 8 Level:0 ActiveLow:0) IOAPIC[0]: Preconfigured routing entry (0-9 -> IRQ 9 Level:1 ActiveLow:0) IOAPIC[0]: Preconfigured routing entry (0-10 -> IRQ 10 Level:1 ActiveLow:0) IOAPIC[0]: Preconfigured routing entry (0-11 -> IRQ 11 Level:1 ActiveLow:0) IOAPIC[0]: Preconfigured routing entry (0-12 -> IRQ 12 Level:0 ActiveLow:0) IOAPIC[0]: Preconfigured routing entry (0-13 -> IRQ 13 Level:0 ActiveLow:0) IOAPIC[0]: Preconfigured routing entry (0-14 -> IRQ 14 Level:0 ActiveLow:0) IOAPIC[0]: Preconfigured routing entry (0-15 -> IRQ 15 Level:0 ActiveLow:0) apic 0 pin 16 not connected apic 0 pin 17 not connected apic 0 pin 18 not connected apic 0 pin 19 not connected apic 0 pin 20 not connected apic 0 pin 21 not connected apic 0 pin 22 not connected apic 0 pin 23 not connected ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 tsc: Marking TSC unstable due to TSCs unsynchronized Calibrating delay loop (skipped) preset value.. 4521.99 BogoMIPS (lpj=22609980) mce: unknown CPU type - not enabling MCE support Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 Speculative Store Bypass: Vulnerable L1TF: Kernel not compiled for PAE. No mitigation for L1TF x86/fpu: x87 FPU will use FXSAVE Freeing SMP alternatives memory: 36K pid_max: default: 32768 minimum: 301 LSM: initializing lsm=capability Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) Running RCU synchronous self tests Running RCU synchronous self tests smpboot: CPU0: GenuineIntel Intel Xeon E312xx (Sandy Bridge) (family: 0x6, model: 0x2a, stepping: 0x1) Running RCU Tasks wait API self tests Running RCU Tasks Rude wait API self tests Running RCU Tasks Trace wait API self tests Performance Events: no PMU driver, software events only. signal: max sigframe size: 1440 Callback from call_rcu_tasks_trace() invoked. rcu: Hierarchical SRCU implementation. rcu: Max phase no-delay instances is 1000. NMI watchdog: Perf NMI watchdog permanently disabled smp: Bringing up secondary CPUs ... smpboot: x86: Booting SMP configuration: .... node #0, CPUs: #1 Masked ExtINT on CPU#1 Callback from call_rcu_tasks() invoked. smp: Brought up 1 node, 2 CPUs smpboot: Total of 2 processors activated (9043.99 BogoMIPS) Memory: 2913784K/3145208K available (26046K kernel code, 7961K rwdata, 15288K rodata, 1204K init, 7696K bss, 229608K reserved, 0K cma-reserved, 2387848K highmem) devtmpfs: initialized Running RCU synchronous self tests Running RCU synchronous self tests clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns futex hash table entries: 512 (order: 3, 32768 bytes, linear) pinctrl core: initialized pinctrl subsystem pinctrl core: failed to create debugfs directory regulator: Failed to create debugfs directory regulator-dummy: no parameters, enabled regulator-dummy: Failed to create debugfs directory NET: Registered PF_NETLINK/PF_ROUTE protocol family thermal_sys: Registered thermal governor 'fair_share' thermal_sys: Registered thermal governor 'step_wise' thermal_sys: Registered thermal governor 'user_space' EISA bus registered cpuidle: using governor ladder NET: Registered PF_QIPCRTR protocol family PCI: PCI BIOS revision 2.10 entry at 0xfd1ca, last bus=0 kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. HugeTLB: registered 4.00 MiB page size, pre-allocated 0 pages HugeTLB: 0 KiB vmemmap can be freed for a 4.00 MiB page cryptd: max_cpu_qlen set to 1000 gpio-f7188x: Unsupported Fintek device 0xffff gpio-f7188x: Unsupported Fintek device 0xffff ACPI: Added _OSI(Module Device) ACPI: Added _OSI(Processor Device) ACPI: Added _OSI(3.0 _SCP Extensions) ACPI: Added _OSI(Processor Aggregator Device) ACPI: 1 ACPI AML tables successfully acquired and loaded ACPI: Interpreter enabled ACPI: PM: (supports S0 S5) ACPI: Using IOAPIC for interrupt routing PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug PCI: Using E820 reservations for host bridge windows ACPI: Enabled 2 GPEs in block 00 to 0F ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) acpi PNP0A03:00: _OSC: OS supports [Segments MSI HPX-Type3] acpi PNP0A03:00: PCIe port services disabled; not requesting _OSC control acpi resource window ([0x440000000-0x4bfffffff] ignored, not CPU addressable) PCI host bridge to bus 0000:00 pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window] pci_bus 0000:00: root bus resource [bus 00-ff] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000 conventional PCI endpoint pci 0000:00:01.0: [8086:7000] type 00 class 0x060100 conventional PCI endpoint pci 0000:00:01.1: [8086:7010] type 00 class 0x010180 conventional PCI endpoint pci 0000:00:01.1: BAR 4 [io 0xc140-0xc14f] pci 0000:00:01.1: BAR 0 [io 0x01f0-0x01f7]: legacy IDE quirk pci 0000:00:01.1: BAR 1 [io 0x03f6]: legacy IDE quirk pci 0000:00:01.1: BAR 2 [io 0x0170-0x0177]: legacy IDE quirk pci 0000:00:01.1: BAR 3 [io 0x0376]: legacy IDE quirk pci 0000:00:01.3: [8086:7113] type 00 class 0x068000 conventional PCI endpoint pci 0000:00:01.3: quirk: [io 0x0600-0x063f] claimed by PIIX4 ACPI pci 0000:00:01.3: quirk: [io 0x0700-0x070f] claimed by PIIX4 SMB pci 0000:00:01.3: quirk_piix4_acpi+0x0/0x102 took 29296 usecs pci 0000:00:02.0: [1234:1111] type 00 class 0x030000 conventional PCI endpoint pci 0000:00:02.0: BAR 0 [mem 0xfd000000-0xfdffffff pref] pci 0000:00:02.0: BAR 2 [mem 0xfebf0000-0xfebf0fff] pci 0000:00:02.0: ROM [mem 0xfebe0000-0xfebeffff pref] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] pci 0000:00:02.0: pci_fixup_video+0x0/0xa2 took 19531 usecs pci 0000:00:03.0: [8086:100e] type 00 class 0x020000 conventional PCI endpoint pci 0000:00:03.0: BAR 0 [mem 0xfebc0000-0xfebdffff] pci 0000:00:03.0: BAR 1 [io 0xc100-0xc13f] pci 0000:00:03.0: ROM [mem 0xfeb80000-0xfebbffff pref] pci 0000:00:04.0: [8086:25ab] type 00 class 0x088000 conventional PCI endpoint pci 0000:00:04.0: BAR 0 [mem 0xfebf1000-0xfebf100f] pci 0000:00:05.0: [1b36:0005] type 00 class 0x00ff00 conventional PCI endpoint pci 0000:00:05.0: BAR 0 [mem 0xfebf2000-0xfebf2fff] pci 0000:00:05.0: BAR 1 [io 0xc000-0xc0ff] pci_bus 0000:00: on NUMA node 0 ACPI: PCI: Interrupt link LNKA configured for IRQ 10 ACPI: PCI: Interrupt link LNKB configured for IRQ 10 ACPI: PCI: Interrupt link LNKC configured for IRQ 11 ACPI: PCI: Interrupt link LNKD configured for IRQ 11 ACPI: PCI: Interrupt link LNKS configured for IRQ 9 iommu: Default domain type: Translated iommu: DMA domain TLB invalidation policy: lazy mode ACPI: bus type USB registered usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb mc: Linux media interface: v0.10 videodev: Linux video capture interface: v2.00 cec: Failed to create debugfs cec dir pps_core: LinuxPPS API ver. 1 registered pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti EDAC MC: Ver: 3.0.0 FPGA manager framework Bluetooth: Core ver 2.22 NET: Registered PF_BLUETOOTH protocol family Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP socket layer initialized Bluetooth: SCO socket layer initialized nfc: nfc_init: NFC Core ver 0.1 NET: Registered PF_NFC protocol family PCI: Using ACPI for IRQ routing PCI: pci_cache_line_size set to 64 bytes e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] e820: reserve RAM buffer [mem 0xbffe0000-0xbfffffff] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.4) Could not create 'lock_event_counts' debugfs entries clocksource: Switched to clocksource kvm-clock VFS: Disk quotas dquot_6.6.0 VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) pnp: PnP ACPI init pnp 00:02: [dma 2] pnp: PnP ACPI: found 7 devices clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns NET: Registered PF_INET protocol family IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) tcp_listen_portaddr_hash hash table entries: 512 (order: 2, 20480 bytes, linear) Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) TCP bind hash table entries: 8192 (order: 7, 655360 bytes, linear) TCP: Hash tables configured (established 8192 bind 8192) UDP hash table entries: 512 (order: 4, 77824 bytes, linear) UDP-Lite hash table entries: 512 (order: 4, 77824 bytes, linear) NET: Registered PF_UNIX/PF_LOCAL protocol family NET: Registered PF_XDP protocol family pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfebfffff window] pci 0000:00:01.0: PIIX3: Enabling Passive Release pci 0000:00:00.0: quirk_passive_release+0x0/0x62 took 12058 usecs pci 0000:00:00.0: Limiting direct PCI/PCI transfers pci 0000:00:00.0: quirk_natoma+0x0/0x25 took 11970 usecs pci 0000:00:01.0: Activating ISA DMA hang workarounds pci 0000:00:01.0: quirk_isa_dma_hangs+0x0/0x28 took 12346 usecs PCI: CLS 0 bytes, default 64 Unpacking initramfs... Freeing initrd memory: 92020K mce: Machine check injector initialized Initialise system trusted keyrings workingset: timestamp_bits=30 max_order=20 bucket_order=0 DLM installed fuse: init (API version 7.41) NET: Registered PF_ALG protocol family Key type asymmetric registered Asymmetric key parser 'x509' registered Asymmetric key parser 'pkcs8' registered Key type pkcs7_test registered test_mul_u64_u64_div_u64: Starting mul_u64_u64_div_u64() test test_mul_u64_u64_div_u64: Completed mul_u64_u64_div_u64() test gpio_it87: no device usbcore: registered new interface driver gpio-mpsse gpio_virtuser: Failed to create the debugfs tree: -1 gpio_winbond: chip ID at 2e is ffff gpio_winbond: not an our chip gpio_winbond: chip ID at 4e is ffff gpio_winbond: not an our chip leds_ss4200: no LED devices found switchtec: loaded. VIA Graphics Integration Chipset framebuffer 2.4 initializing hgafb: HGA card not detected. hgafb hgafb.0: probe with driver hgafb failed with error -22 usbcore: registered new interface driver smscufx input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 ACPI: button: Power Button [PWRF] Warning: Processor Platform Limit event detected, but not handled. Consider compiling CPUfreq support into your kernel. N_HDLC line discipline registered with maxframe=4096 Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled 00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A Driver 'dfl-uart' was unable to register with bus_type 'dfl' because the bus was not initialized. MOXA Intellio family driver version 6.0k Applicom driver: $Id: ac.c,v 1.30 2000/03/22 16:03:57 dwmw2 Exp $ ac.o: No PCI boards found. ac.o: For an ISA board you must supply memory and irq parameters. sonypi: Sony Programmable I/O Controller Driver v1.26. Non-volatile memory driver v1.3 ppdev: user-space parallel port driver platform pc8736x_gpio.0: NatSemi pc8736x GPIO Driver Initializing platform pc8736x_gpio.0: no device found nsc_gpio initializing telclk_interrupt = 0xf non-mcpbl0010 hw. smapi::smapi_init, ERROR invalid usSmapiID mwave: tp3780i::tp3780I_InitializeBoardData: Error: SMAPI is not available on this machine mwave: mwavedd::mwave_init: Error: Failed to initialize board data mwave: mwavedd::mwave_init: Error: Failed to initialize Linux agpgart interface v0.103 Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds). usbcore: registered new interface driver xillyusb ACPI: bus type drm_connector registered [drm] radeon kernel modesetting enabled. [drm] amdgpu kernel modesetting enabled. [drm] Initialized vkms 1.0.0 for vkms on minor 0 usbcore: registered new interface driver udl [drm] Found bochs VGA, ID 0xb0c5. [drm] Framebuffer size 16384 kB @ 0xfd000000, mmio @ 0xfebf0000. [drm] Initialized bochs-drm 1.0.0 for 0000:00:02.0 on minor 1 parport_pc 00:03: reported by Plug and Play ACPI parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] parport_pc parport_pc.956: Unable to set coherent dma mask: disabling DMA parport_pc parport_pc.888: Unable to set coherent dma mask: disabling DMA parport_pc parport_pc.632: Unable to set coherent dma mask: disabling DMA ibmasm: IBM ASM Service Processor Driver version 1.0 loaded dummy-irq: no IRQ given. Use irq=N Phantom Linux Driver, version n0.9.8, init OK Silicon Labs C2 port support v. 0.51.0 - (C) 2007 Rodolfo Giometti Guest personality initialized and is inactive VMCI host device registered (name=vmci, major=10, minor=121) Initialized host personality usbcore: registered new interface driver rtsx_usb usbcore: registered new interface driver viperboard usbcore: registered new interface driver dln2 usbcore: registered new interface driver pn533_usb usbcore: registered new interface driver port100 usbcore: registered new interface driver nfcmrvl mtdoops: mtd device (mtddev=name/number) must be supplied device id = 2440 device id = 2480 device id = 24c0 device id = 24d0 device id = 25a1 device id = 2670 platform physmap-flash.0: failed to claim resource 0: [mem 0x08000000-0x07ffffff] slram: not enough parameters. Ramix PMC551 PCI Mezzanine Ram Driver. (C) 1999,2000 Nortel Networks. pmc551: not detected UBI error: cannot create "ubi" debugfs directory, error -1 UBI error: cannot initialize UBI, error -1 Warning: Cannot create bonding directory in debugfs wireguard: allowedips self-tests: pass wireguard: nonce counter self-tests: pass wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information. wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld . All Rights Reserved. MACsec IEEE 802.1AE mdio_bus fixed-0: using lookup tables for GPIO lookup mdio_bus fixed-0: No GPIO consumer reset found usbcore: registered new interface driver mvusb_mdio arcnet: arcnet loaded arcnet:rfc1201: RFC1201 "standard" (`a') encapsulation support loaded arcnet:arc_rawmode: raw mode (`r') encapsulation support loaded arcnet:com90xx: COM90xx chipset support S3: No ARCnet cards found. arcnet:com90io: COM90xx IO-mapped mode support (by David Woodhouse et el.) arcnet:com90io: E-mail me if you actually test this driver, please! (unnamed net_device) (uninitialized): No autoprobe for IO mapped cards; you must specify the base address! arcnet:arc_rimi: RIM I (entirely mem-mapped) support arcnet:arc_rimi: E-mail me if you actually test the RIM I driver, please! arcnet:arc_rimi: Given: node 00h, shmem 0h, irq 0 arcnet:arc_rimi: No autoprobe for RIM I; you must specify the shmem and irq! vcan: Virtual CAN interface driver vxcan: Virtual CAN Tunnel driver mdio_bus fixed-0:00: using lookup tables for GPIO lookup mdio_bus fixed-0:00: No GPIO consumer reset found mdio_bus fixed-0:01: using lookup tables for GPIO lookup mdio_bus fixed-0:01: No GPIO consumer reset found mdio_bus fixed-0:02: using lookup tables for GPIO lookup mdio_bus fixed-0:02: No GPIO consumer reset found mdio_bus fixed-0:03: using lookup tables for GPIO lookup mdio_bus fixed-0:03: No GPIO consumer reset found cnic: QLogic cnicDriver v2.5.22 (July 20, 2015) e100: Intel(R) PRO/100 Network Driver e100: Copyright(c) 1999-2006 Intel Corporation e1000: Intel(R) PRO/1000 Network Driver e1000: Copyright (c) 1999-2006 Intel Corporation. ACPI: \_SB_.LNKC: Enabled at IRQ 11 e1000 0000:00:03.0 eth0: (PCI:33MHz:32-bit) 52:54:00:12:34:56 e1000 0000:00:03.0 eth0: Intel(R) PRO/1000 Network Connection e1000e: Intel(R) PRO/1000 Network Driver e1000e: Copyright(c) 1999 - 2015 Intel Corporation. ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver ixgbe: Copyright (c) 1999-2016 Intel Corporation. ixgbevf: Intel(R) 10 Gigabit PCI Express Virtual Function Network Driver ixgbevf: Copyright (c) 2009 - 2018 Intel Corporation. i40e: Intel(R) Ethernet Connection XL710 Network Driver i40e: Copyright (c) 2013 - 2019 Intel Corporation. init of debugfs failed Intel(R) Ethernet Switch Host Interface Driver Copyright(c) 2013 - 2019 Intel Corporation. jme: JMicron JMC2XX ethernet driver version 1.0.8 myri10ge: Version 1.5.3-1.534 Solarflare NET driver Solarflare Falcon driver v4.1 tehuti: Tehuti Networks(R) Network Driver, 7.29.3 tehuti: Options: hw_csum hdlc: HDLC support module revision 1.22 usbcore: registered new interface driver ath6kl_usb wwan wwan0: port wwan0at0 attached wwan wwan0: port wwan0at1 attached wwan wwan1: port wwan1at0 attached wwan wwan1: port wwan1at1 attached VMware vmxnet3 virtual NIC driver - version 1.9.0.0-k-NAPI usbcore: registered new interface driver catc usbcore: registered new interface driver kaweth pegasus: Pegasus/Pegasus II USB Ethernet driver usbcore: registered new interface driver pegasus usbcore: registered new interface driver rtl8150 usbcore: registered new device driver r8152-cfgselector usbcore: registered new interface driver r8152 usbcore: registered new interface driver hso usbcore: registered new interface driver ipheth VFIO - User Level meta-driver version: 0.3 cfag12864b: ERROR: ks0108 is not initialized cfag12864bfb: ERROR: cfag12864b is not initialized parport0: no more devices allowed panel: panel_attach: port->number=0 parport=0, parport_register_device() failed usbcore: registered new interface driver usblp usbcore: registered new interface driver cdc_wdm usbcore: registered new interface driver usbtmc usbcore: registered new interface driver mdc800 mdc800: v0.7.5 (30/10/2000):USB Driver for Mustek MDC800 Digital Camera usbcore: registered new interface driver adutux usbcore: registered new interface driver appledisplay usbcore: registered new interface driver cypress_cy7c63 usbcore: registered new interface driver emi62 - firmware loader usbcore: registered new device driver apple-mfi-fastcharge usbcore: registered new interface driver idmouse usbcore: registered new interface driver iowarrior usbcore: registered new interface driver usblcd usbcore: registered new interface driver usb_ehset_test usbcore: registered new interface driver trancevibrator usbcore: registered new interface driver uss720 uss720: USB Parport Cable driver for Cables using the Lucent Technologies USS720 Chip uss720: NOTE: this is a special purpose driver to allow nonstandard uss720: protocols (eg. bitbang) over USS720 usb to parallel cables uss720: If you just want to connect to a printer, use usblp instead usbcore: registered new interface driver yurex usbcore: registered new interface driver sisusb usbcore: registered new interface driver lvs usbcore: registered new device driver onboard-usb-dev dummy_hcd dummy_hcd.0: USB Host+Gadget Emulator, driver 02 May 2005 dummy_hcd dummy_hcd.0: Dummy host controller dummy_hcd dummy_hcd.0: new USB bus registered, assigned bus number 1 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.13 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: Dummy host controller usb usb1: Manufacturer: Linux 6.13.0-rc2-00014-gb04e317b5226 dummy_hcd usb usb1: SerialNumber: dummy_hcd.0 hub 1-0:1.0: USB hub found hub 1-0:1.0: 1 port detected g_ether gadget.0: HOST MAC 92:a5:1e:68:8d:cf g_ether gadget.0: MAC 32:f3:35:ee:fa:7a g_ether gadget.0: Ethernet Gadget, version: Memorial Day 2008 g_ether gadget.0: g_ether ready gadgetfs: USB Gadget filesystem, version 24 Aug 2004 UDC core: g_webcam: couldn't find an available UDC UDC core: g_ncm: couldn't find an available UDC vhci_hcd: vhci_hcd_probe:1349: name vhci_hcd id 0 vhci_hcd vhci_hcd.0: USB/IP Virtual Host Controller vhci_hcd vhci_hcd.0: new USB bus registered, assigned bus number 2 vhci_hcd: vhci_start:1181: enter vhci_start vhci_hcd: vhci_start:1223: created sysfs vhci_hcd.0 usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.13 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: USB/IP Virtual Host Controller usb usb2: Manufacturer: Linux 6.13.0-rc2-00014-gb04e317b5226 vhci_hcd usb usb2: SerialNumber: vhci_hcd.0 hub 2-0:1.0: USB hub found vhci_hcd: vhci_hub_control:335: typeReq a006 wValue 2900 wIndex 0 vhci_hcd: vhci_hub_control:406: GetHubDescriptor vhci_hcd: vhci_hub_control:644: port -1 vhci_hcd: vhci_hub_control:652: bye hub 2-0:1.0: 8 ports detected vhci_hcd: vhci_hub_control:335: typeReq a000 wValue 0 wIndex 0 vhci_hcd: vhci_hub_control:429: GetHubStatus vhci_hcd: vhci_hub_control:644: port -1 vhci_hcd: vhci_hub_control:652: bye vhci_hcd: vhci_hub_control:335: typeReq 2303 wValue 8 wIndex 1 usb 1-1: new high-speed USB device number 2 using dummy_hcd vhci_hcd: vhci_hub_control:548: SetPortFeature: USB_PORT_FEAT_POWER vhci_hcd: vhci_hub_control:644: port 0 vhci_hcd: dump_port_status_diff:128: status prev -> new: 00000000 -> 00000100 vhci_hcd: dump_port_status_diff:142: +POWER vhci_hcd: dump_port_status_diff:150: vhci_hcd: vhci_hub_control:652: bye vhci_hcd: vhci_hub_control:335: typeReq 2303 wValue 8 wIndex 2 vhci_hcd: vhci_hub_control:548: SetPortFeature: USB_PORT_FEAT_POWER vhci_hcd: vhci_hub_control:644: port 1 vhci_hcd: dump_port_status_diff:128: status prev -> new: 00000000 -> 00000100 vhci_hcd: dump_port_status_diff:142: +POWER vhci_hcd: dump_port_status_diff:150: vhci_hcd: vhci_hub_control:652: bye vhci_hcd: vhci_hub_control:335: typeReq 2303 wValue 8 wIndex 3 vhci_hcd: vhci_hub_control:548: SetPortFeature: USB_PORT_FEAT_POWER vhci_hcd: vhci_hub_control:644: port 2 vhci_hcd: dump_port_status_diff:128: status prev -> new: 00000000 -> 00000100 vhci_hcd: dump_port_status_diff:142: +POWER vhci_hcd: dump_port_status_diff:150: vhci_hcd: vhci_hub_control:652: bye vhci_hcd: vhci_hub_control:335: typeReq 2303 wValue 8 wIndex 4 vhci_hcd: vhci_hub_control:548: SetPortFeature: USB_PORT_FEAT_POWER vhci_hcd: vhci_hub_control:644: port 3 usb 1-1: New USB device found, idVendor=0525, idProduct=a4a2, bcdDevice= 6.13 vhci_hcd: dump_port_status_diff:128: status prev -> new: 00000000 -> 00000100 vhci_hcd: dump_port_status_diff:142: +POWER usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 vhci_hcd: dump_port_status_diff:150: vhci_hcd: vhci_hub_control:652: bye vhci_hcd: vhci_hub_control:335: typeReq 2303 wValue 8 wIndex 5 usb 1-1: Product: RNDIS/Ethernet Gadget vhci_hcd: vhci_hub_control:548: SetPortFeature: USB_PORT_FEAT_POWER vhci_hcd: vhci_hub_control:644: port 4 usb 1-1: Manufacturer: Linux 6.13.0-rc2-00014-gb04e317b5226 with dummy_udc vhci_hcd: dump_port_status_diff:128: status prev -> new: 00000000 -> 00000100 vhci_hcd: dump_port_status_diff:142: +POWER vhci_hcd: dump_port_status_diff:150: vhci_hcd: vhci_hub_control:652: bye vhci_hcd: vhci_hub_control:335: typeReq 2303 wValue 8 wIndex 6 vhci_hcd: vhci_hub_control:548: SetPortFeature: USB_PORT_FEAT_POWER vhci_hcd: vhci_hub_control:644: port 5 vhci_hcd: dump_port_status_diff:128: status prev -> new: 00000000 -> 00000100 vhci_hcd: dump_port_status_diff:142: +POWER vhci_hcd: dump_port_status_diff:150: vhci_hcd: vhci_hub_control:652: bye vhci_hcd: vhci_hub_control:335: typeReq 2303 wValue 8 wIndex 7 vhci_hcd: vhci_hub_control:548: SetPortFeature: USB_PORT_FEAT_POWER vhci_hcd: vhci_hub_control:644: port 6 vhci_hcd: dump_port_status_diff:128: status prev -> new: 00000000 -> 00000100 vhci_hcd: dump_port_status_diff:142: +POWER vhci_hcd: dump_port_status_diff:150: vhci_hcd: vhci_hub_control:652: bye vhci_hcd: vhci_hub_control:335: typeReq 2303 wValue 8 wIndex 8 vhci_hcd: vhci_hub_control:548: SetPortFeature: USB_PORT_FEAT_POWER vhci_hcd: vhci_hub_control:644: port 7 vhci_hcd: dump_port_status_diff:128: status prev -> new: 00000000 -> 00000100 vhci_hcd: dump_port_status_diff:142: +POWER vhci_hcd: dump_port_status_diff:150: vhci_hcd: vhci_hub_control:652: bye vhci_hcd: vhci_hub_control:335: typeReq a300 wValue 0 wIndex 1 vhci_hcd: vhci_hub_control:433: GetPortStatus port 1 vhci_hcd vhci_hcd.0: USB/IP Virtual Host Controller vhci_hcd: vhci_hub_control:494: GetPortStatus bye 100 0 vhci_hcd: vhci_hub_control:644: port 0 vhci_hcd: dump_port_status_diff:128: status prev -> new: 00000100 -> 00000100 vhci_hcd: dump_port_status_diff:142: POWER vhci_hcd: dump_port_status_diff:150: vhci_hcd: vhci_hub_control:652: bye vhci_hcd vhci_hcd.0: new USB bus registered, assigned bus number 3 vhci_hcd: vhci_hub_control:335: typeReq a300 wValue 0 wIndex 2 vhci_hcd: vhci_start:1181: enter vhci_start vhci_hcd: vhci_hub_control:433: GetPortStatus port 2 vhci_hcd: vhci_hub_control:494: GetPortStatus bye 100 0 vhci_hcd: vhci_hub_control:335: typeReq 8006 wValue f00 wIndex 0 vhci_hcd: vhci_hub_control:644: port 1 vhci_hcd: dump_port_status_diff:128: status prev -> new: 00000100 -> 00000100 vhci_hcd: dump_port_status_diff:142: POWER vhci_hcd: dump_port_status_diff:150: vhci_hcd: vhci_hub_control:652: bye vhci_hcd: vhci_hub_control:335: typeReq a300 wValue 0 wIndex 3 vhci_hcd: vhci_hub_control:644: port -1 vhci_hcd: vhci_hub_control:652: bye vhci_hcd: vhci_hub_control:433: GetPortStatus port 3 vhci_hcd: vhci_hub_control:335: typeReq 8006 wValue f00 wIndex 0 vhci_hcd: vhci_hub_control:494: GetPortStatus bye 100 0 vhci_hcd: vhci_hub_control:644: port 2 vhci_hcd: dump_port_status_diff:128: status prev -> new: 00000100 -> 00000100 vhci_hcd: dump_port_status_diff:142: POWER vhci_hcd: dump_port_status_diff:150: vhci_hcd: vhci_hub_control:652: bye vhci_hcd: vhci_hub_control:644: port -1 vhci_hcd: vhci_hub_control:335: typeReq a300 wValue 0 wIndex 4 vhci_hcd: vhci_hub_control:652: bye usb usb3: We don't know the algorithms for LPM for this host, disabling LPM. vhci_hcd: vhci_hub_control:433: GetPortStatus port 4 usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.13 vhci_hcd: vhci_hub_control:494: GetPortStatus bye 100 0 vhci_hcd: vhci_hub_control:644: port 3 vhci_hcd: dump_port_status_diff:128: status prev -> new: 00000100 -> 00000100 vhci_hcd: dump_port_status_diff:142: POWER vhci_hcd: dump_port_status_diff:150: vhci_hcd: vhci_hub_control:652: bye vhci_hcd: vhci_hub_control:335: typeReq a300 wValue 0 wIndex 5 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 vhci_hcd: vhci_hub_control:433: GetPortStatus port 5 vhci_hcd: vhci_hub_control:494: GetPortStatus bye 100 0 vhci_hcd: vhci_hub_control:644: port 4 usb usb3: Product: USB/IP Virtual Host Controller vhci_hcd: dump_port_status_diff:128: status prev -> new: 00000100 -> 00000100 vhci_hcd: dump_port_status_diff:142: POWER usb usb3: Manufacturer: Linux 6.13.0-rc2-00014-gb04e317b5226 vhci_hcd vhci_hcd: dump_port_status_diff:150: vhci_hcd: vhci_hub_control:652: bye vhci_hcd: vhci_hub_control:335: typeReq a300 wValue 0 wIndex 6 usb usb3: SerialNumber: vhci_hcd.0 vhci_hcd: vhci_hub_control:433: GetPortStatus port 6 vhci_hcd: vhci_hub_control:494: GetPortStatus bye 100 0 hub 3-0:1.0: USB hub found vhci_hcd: vhci_hub_control:644: port 5 vhci_hcd: dump_port_status_diff:128: status prev -> new: 00000100 -> 00000100 vhci_hcd: dump_port_status_diff:142: POWER vhci_hcd: dump_port_status_diff:150: vhci_hcd: vhci_hub_control:652: bye vhci_hcd: vhci_hub_control:335: typeReq a300 wValue 0 wIndex 7 vhci_hcd: vhci_hub_control:335: typeReq a006 wValue 2a00 wIndex 0 vhci_hcd: vhci_hub_control:433: GetPortStatus port 7 vhci_hcd: vhci_hub_control:494: GetPortStatus bye 100 0 vhci_hcd: vhci_hub_control:644: port 6 vhci_hcd: dump_port_status_diff:128: status prev -> new: 00000100 -> 00000100 vhci_hcd: dump_port_status_diff:142: POWER vhci_hcd: dump_port_status_diff:150: vhci_hcd: vhci_hub_control:652: bye vhci_hcd: vhci_hub_control:406: GetHubDescriptor vhci_hcd: vhci_hub_control:335: typeReq a300 wValue 0 wIndex 8 vhci_hcd: vhci_hub_control:644: port -1 vhci_hcd: vhci_hub_control:652: bye hub 3-0:1.0: 8 ports detected vhci_hcd: vhci_hub_control:433: GetPortStatus port 8 vhci_hcd: vhci_hub_control:335: typeReq a000 wValue 0 wIndex 0 vhci_hcd: vhci_hub_control:494: GetPortStatus bye 100 0 vhci_hcd: vhci_hub_control:644: port 7 vhci_hcd: dump_port_status_diff:128: status prev -> new: 00000100 -> 00000100 vhci_hcd: dump_port_status_diff:142: POWER vhci_hcd: dump_port_status_diff:150: vhci_hcd: vhci_hub_control:652: bye vhci_hcd: vhci_hub_control:429: GetHubStatus vhci_hcd: vhci_hub_control:644: port -1 vhci_hcd: vhci_hub_control:652: bye vhci_hcd: vhci_hub_control:335: typeReq 2303 wValue 8 wIndex 1 vhci_hcd: vhci_hub_control:548: SetPortFeature: USB_PORT_FEAT_POWER vhci_hcd: vhci_hub_control:644: port 0 vhci_hcd: dump_port_status_diff:128: status prev -> new: 00000000 -> 00000200 vhci_hcd: dump_port_status_diff:142: +POWER vhci_hcd: dump_port_status_diff:150: vhci_hcd: vhci_hub_control:652: bye vhci_hcd: vhci_hub_control:335: typeReq 2303 wValue 8 wIndex 2 vhci_hcd: vhci_hub_control:548: SetPortFeature: USB_PORT_FEAT_POWER vhci_hcd: vhci_hub_control:644: port 1 vhci_hcd: dump_port_status_diff:128: status prev -> new: 00000000 -> 00000200 vhci_hcd: dump_port_status_diff:142: +POWER vhci_hcd: dump_port_status_diff:150: vhci_hcd: vhci_hub_control:652: bye vhci_hcd: vhci_hub_control:335: typeReq 2303 wValue 8 wIndex 3 vhci_hcd: vhci_hub_control:548: SetPortFeature: USB_PORT_FEAT_POWER vhci_hcd: vhci_hub_control:644: port 2 vhci_hcd: dump_port_status_diff:128: status prev -> new: 00000000 -> 00000200 vhci_hcd: dump_port_status_diff:142: +POWER vhci_hcd: dump_port_status_diff:150: vhci_hcd: vhci_hub_control:652: bye vhci_hcd: vhci_hub_control:335: typeReq 2303 wValue 8 wIndex 4 vhci_hcd: vhci_hub_control:548: SetPortFeature: USB_PORT_FEAT_POWER vhci_hcd: vhci_hub_control:644: port 3 vhci_hcd: dump_port_status_diff:128: status prev -> new: 00000000 -> 00000200 vhci_hcd: dump_port_status_diff:142: +POWER vhci_hcd: dump_port_status_diff:150: vhci_hcd: vhci_hub_control:652: bye vhci_hcd: vhci_hub_control:335: typeReq 2303 wValue 8 wIndex 5 vhci_hcd: vhci_hub_control:548: SetPortFeature: USB_PORT_FEAT_POWER vhci_hcd: vhci_hub_control:644: port 4 vhci_hcd: dump_port_status_diff:128: status prev -> new: 00000000 -> 00000200 vhci_hcd: dump_port_status_diff:142: +POWER vhci_hcd: dump_port_status_diff:150: vhci_hcd: vhci_hub_control:652: bye vhci_hcd: vhci_hub_control:335: typeReq 2303 wValue 8 wIndex 6 vhci_hcd: vhci_hub_control:548: SetPortFeature: USB_PORT_FEAT_POWER vhci_hcd: vhci_hub_control:644: port 5 vhci_hcd: dump_port_status_diff:128: status prev -> new: 00000000 -> 00000200 vhci_hcd: dump_port_status_diff:142: +POWER vhci_hcd: dump_port_status_diff:150: vhci_hcd: vhci_hub_control:652: bye vhci_hcd: vhci_hub_control:335: typeReq 2303 wValue 8 wIndex 7 vhci_hcd: vhci_hub_control:548: SetPortFeature: USB_PORT_FEAT_POWER vhci_hcd: vhci_hub_control:644: port 6 vhci_hcd: dump_port_status_diff:128: status prev -> new: 00000000 -> 00000200 vhci_hcd: dump_port_status_diff:142: +POWER vhci_hcd: dump_port_status_diff:150: vhci_hcd: vhci_hub_control:652: bye vhci_hcd: vhci_hub_control:335: typeReq 2303 wValue 8 wIndex 8 vhci_hcd: vhci_hub_control:548: SetPortFeature: USB_PORT_FEAT_POWER vhci_hcd: vhci_hub_control:644: port 7 vhci_hcd: dump_port_status_diff:128: status prev -> new: 00000000 -> 00000200 vhci_hcd: dump_port_status_diff:142: +POWER vhci_hcd: dump_port_status_diff:150: vhci_hcd: vhci_hub_control:652: bye vhci_hcd: vhci_hcd_probe:1386: bye vhci_hcd: vhci_hub_control:335: typeReq a300 wValue 0 wIndex 1 vhci_hcd: vhci_hub_control:433: GetPortStatus port 1 vhci_hcd: vhci_hub_control:494: GetPortStatus bye 200 0 g_webcam gadget.1: uvc: uvc_function_bind() vhci_hcd: vhci_hub_control:644: port 0 vhci_hcd: dump_port_status_diff:128: status prev -> new: 00000200 -> 00000200 vhci_hcd: dump_port_status_diff:142: POWER vhci_hcd: dump_port_status_diff:150: vhci_hcd: vhci_hub_control:652: bye vhci_hcd: vhci_hub_control:335: typeReq a300 wValue 0 wIndex 2 g_webcam gadget.1: Webcam Video Gadget vhci_hcd: vhci_hub_control:433: GetPortStatus port 2 g_webcam gadget.1: g_webcam ready vhci_hcd: vhci_hub_control:494: GetPortStatus bye 200 0 vhci_hcd: vhci_hub_control:644: port 1 vhci_hcd: dump_port_status_diff:128: status prev -> new: 00000200 -> 00000200 vhci_hcd: dump_port_status_diff:142: POWER vhci_hcd: dump_port_status_diff:150: vhci_hcd: vhci_hub_control:652: bye vhci_hcd: vhci_hub_control:335: typeReq a300 wValue 0 wIndex 3 vhci_hcd: vhci_hub_control:433: GetPortStatus port 3 vhci_hcd: vhci_hub_control:494: GetPortStatus bye 200 0 vhci_hcd: vhci_hub_control:644: port 2 vhci_hcd: dump_port_status_diff:128: status prev -> new: 00000200 -> 00000200 vhci_hcd: dump_port_status_diff:142: POWER vhci_hcd: dump_port_status_diff:150: vhci_hcd: vhci_hub_control:652: bye vhci_hcd: vhci_hub_control:335: typeReq a300 wValue 0 wIndex 4 vhci_hcd: vhci_hub_control:433: GetPortStatus port 4 vhci_hcd: vhci_hub_control:494: GetPortStatus bye 200 0 vhci_hcd: vhci_hub_control:644: port 3 vhci_hcd: dump_port_status_diff:128: status prev -> new: 00000200 -> 00000200 vhci_hcd: dump_port_status_diff:142: POWER vhci_hcd: dump_port_status_diff:150: vhci_hcd: vhci_hub_control:652: bye vhci_hcd: vhci_hub_control:335: typeReq a300 wValue 0 wIndex 5 vhci_hcd: vhci_hub_control:433: GetPortStatus port 5 vhci_hcd: vhci_hub_control:494: GetPortStatus bye 200 0 vhci_hcd: vhci_hub_control:644: port 4 vhci_hcd: dump_port_status_diff:128: status prev -> new: 00000200 -> 00000200 vhci_hcd: dump_port_status_diff:142: POWER vhci_hcd: dump_port_status_diff:150: vhci_hcd: vhci_hub_control:652: bye vhci_hcd: vhci_hub_control:335: typeReq a300 wValue 0 wIndex 6 vhci_hcd: vhci_hub_control:433: GetPortStatus port 6 vhci_hcd: vhci_hub_control:494: GetPortStatus bye 200 0 vhci_hcd: vhci_hub_control:644: port 5 vhci_hcd: dump_port_status_diff:128: status prev -> new: 00000200 -> 00000200 vhci_hcd: dump_port_status_diff:142: POWER vhci_hcd: dump_port_status_diff:150: vhci_hcd: vhci_hub_control:652: bye vhci_hcd: vhci_hub_control:335: typeReq a300 wValue 0 wIndex 7 vhci_hcd: vhci_hub_control:433: GetPortStatus port 7 vhci_hcd: vhci_hub_control:494: GetPortStatus bye 200 0 vhci_hcd: vhci_hub_control:644: port 6 vhci_hcd: dump_port_status_diff:128: status prev -> new: 00000200 -> 00000200 vhci_hcd: dump_port_status_diff:142: POWER vhci_hcd: dump_port_status_diff:150: vhci_hcd: vhci_hub_control:652: bye vhci_hcd: vhci_hub_control:335: typeReq a300 wValue 0 wIndex 8 vhci_hcd: vhci_hub_control:433: GetPortStatus port 8 vhci_hcd: vhci_hub_control:494: GetPortStatus bye 200 0 vhci_hcd: vhci_hub_control:644: port 7 vhci_hcd: dump_port_status_diff:128: status prev -> new: 00000200 -> 00000200 vhci_hcd: dump_port_status_diff:142: POWER vhci_hcd: dump_port_status_diff:150: vhci_hcd: vhci_hub_control:652: bye i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 parport0: no more devices allowed mousedev: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 usbcore: registered new interface driver pxrc usbcore: registered new interface driver xpad usbcore: registered new interface driver usb_acecad usbcore: registered new interface driver hanwang usbcore: registered new interface driver kbtab i2c_dev: i2c /dev entries driver piix4_smbus 0000:00:01.3: SMBus Host Controller at 0x700, revision 0 i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD usbcore: registered new interface driver i2c-cp2615 usbcore: registered new interface driver RobotFuzz Open Source InterFace, OSIF usbcore: registered new interface driver i2c-tiny-usb usbcore: registered new interface driver s2255 usbcore: registered new interface driver airspy usbcore: registered new interface driver hackrf usbcore: registered new interface driver Philips webcam usbcore: registered new interface driver uvcvideo usbcore: registered new interface driver em28xx em28xx: Registered (Em28xx v4l2 Extension) extension vim2m vim2m.0: Device registered as /dev/video0 vivid-000: using single planar format API vivid-000: V4L2 capture device registered as video5 vivid-000: V4L2 output device registered as video6 vivid-000: V4L2 capture device registered as vbi0, supports raw and sliced VBI vivid-000: V4L2 output device registered as vbi1, supports raw and sliced VBI vivid-000: V4L2 capture device registered as swradio0 vivid-000: V4L2 receiver device registered as radio0 vivid-000: V4L2 transmitter device registered as radio1 vivid-000: V4L2 metadata capture device registered as video7 vivid-000: V4L2 metadata output device registered as video8 vivid-000: V4L2 touch capture device registered as v4l-touch0 usbcore: registered new interface driver radioshark2 usbcore: registered new interface driver dsbr100 usbcore: registered new interface driver radio-keene pps pps0: new PPS source ktimer pps pps0: ktimer PPS source registered parport0: no more devices allowed pps_parport: couldn't register with parport0 Driver for 1-wire Dallas network protocol. usbcore: registered new interface driver DS9490R applesmc: supported laptop not found! applesmc: driver init failed (ret=-19)! f71882fg: Not a Fintek device f71882fg: Not a Fintek device usbcore: registered new interface driver powerz Bluetooth: HCI UART driver ver 2.3 Bluetooth: HCI UART protocol H4 registered Bluetooth: HCI UART protocol ATH3K registered Bluetooth: HCI UART protocol Three-wire (H5) registered Bluetooth: HCI UART protocol Intel registered Bluetooth: HCI UART protocol Broadcom registered Bluetooth: HCI UART protocol Marvell registered usbcore: registered new interface driver bpa10x usbcore: registered new interface driver bfusb usbcore: registered new interface driver btusb usbcore: registered new interface driver ath3k platform eisa.0: Probing EISA bus 0 platform eisa.0: EISA: Cannot allocate resource for mainboard platform eisa.0: Cannot allocate resource for EISA slot 1 platform eisa.0: Cannot allocate resource for EISA slot 2 platform eisa.0: Cannot allocate resource for EISA slot 3 platform eisa.0: Cannot allocate resource for EISA slot 4 platform eisa.0: Cannot allocate resource for EISA slot 5 platform eisa.0: Cannot allocate resource for EISA slot 6 platform eisa.0: Cannot allocate resource for EISA slot 7 platform eisa.0: Cannot allocate resource for EISA slot 8 platform eisa.0: EISA: Detected 0 cards sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman VUB300 Driver rom wait states = 1C irqpoll timeout = 0400 usbcore: registered new interface driver vub300 sdhci-pltfm: SDHCI platform and OF driver helper rtrs_server L2307: Loading module rtrs_server, proto 2.0: (max_chunk_size: 131072 (pure IO 126976, headers 4096) , sess_queue_depth: 512, always_invalidate: 1) usbcore: registered new interface driver es2_ap_driver vme_user: VME User Space Access Driver vme_user: No cards, skipping registration no options. greybus: registered new driver vibrator greybus: registered new driver gbphy gb_gbphy: registered new driver pwm gb_gbphy: registered new driver uart gb_gbphy: registered new driver usb amd_hsmp: HSMP is not supported on Family:6 model:2a dell_smbios: Unable to run on non-Dell system No DMI match for this platform gnss: GNSS driver registered with major 493 usbcore: registered new interface driver hdm_usb drop_monitor: Initializing network drop monitor service NET: Registered PF_LLC protocol family u32 classifier input device check on IPVS: Registered protocols (TCP, SCTP) IPVS: Connection hash table configured (size=4096, memory=16Kbytes) IPVS: ipvs loaded. IPVS: [rr] scheduler registered. IPVS: [wlc] scheduler registered. IPVS: [lblc] scheduler registered. IPVS: [lblcr] scheduler registered. IPVS: [dh] scheduler registered. IPVS: [mh] scheduler registered. IPVS: [sed] scheduler registered. IPVS: [nq] scheduler registered. IPVS: [twos] scheduler registered. ipip: IPv4 and MPLS over IPv4 tunneling driver gre: GRE over IPv4 demultiplexor driver ip_gre: GRE over IPv4 tunneling driver Initializing XFRM netlink socket NET: Registered PF_INET6 protocol family Segment Routing with IPv6 RPL Segment Routing with IPv6 In-situ OAM (IOAM) with IPv6 sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver ip6_gre: GRE over IPv6 tunneling driver NET: Registered PF_PACKET protocol family NET: Registered PF_KEY protocol family NET: Registered PF_APPLETALK protocol family can: controller area network core NET: Registered PF_CAN protocol family can: raw protocol can: broadcast manager protocol can: netlink gateway - max_hops=1 can: isotp protocol (max_pdu_size 8300) Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM ver 1.11 Bluetooth: BNEP (Ethernet Emulation) ver 1.3 Bluetooth: BNEP filters: protocol multicast Bluetooth: BNEP socket layer initialized NET: Registered PF_RXRPC protocol family Key type rxrpc registered Key type rxrpc_s registered NET: Registered PF_PHONET protocol family 8021q: 802.1Q VLAN Support v1.8 sctp: Hash tables configured (bind 64/102) tipc: Activated (version 2.0.0) NET: Registered PF_TIPC protocol family tipc: Started in single node mode NET: Registered PF_SMC protocol family 9pnet: Installing 9P2000 support NET: Registered PF_CAIF protocol family Key type dns_resolver registered Key type ceph registered libceph: loaded (mon/osd proto 15/24) batman_adv: B.A.T.M.A.N. advanced 2024.3 (compatibility version 15) loaded NET: Registered PF_VSOCK protocol family Cannot create hsr debugfs root directory mce: Unable to init MCE device (rc: -5) IPI shorthand broadcast: enabled ... APIC ID: 00000000 (0) ... APIC VERSION: 00050014 0000000000000000000000000000000000000000000000000000000000000000 0000000000000000000000000000000000000000000000000000000000001000 number of MP IRQ sources: 15. number of IO-APIC #0 registers: 24. testing the IO APIC....................... IO APIC #0...... .... register #00: 00000000 ....... : physical APIC id: 00 ....... : Delivery Type: 0 ....... : LTS : 0 .... register #01: 00170011 ....... : max redirection entries: 17 ....... : PRQ implemented: 0 ....... : IO APIC version: 11 .... register #02: 00000000 ....... : arbitration: 00 .... IRQ redirection table: IOAPIC 0: pin00, disabled, edge , high, V(00), IRR(0), S(0), physic al, D(0000), M(0) pin01, enabled , edge , high, V(21), IRR(0), S(0), logical , D(0001), M(0) pin02, enabled , edge , high, V(30), IRR(0), S(0), logical , D(0001), M(0) pin03, disabled, edge , high, V(00), IRR(0), S(0), physic al, D(0000), M(0) pin04, disabled, edge , high, V(00), IRR(0), S(0), physic al, D(0000), M(0) pin05, disabled, edge , high, V(00), IRR(0), S(0), physic al, D(0000), M(0) pin06, disabled, edge , high, V(00), IRR(0), S(0), physic al, D(0000), M(0) pin07, enabled , edge , high, V(20), IRR(0), S(0), logical , D(0001), M(0) pin08, disabled, edge , high, V(00), IRR(0), S(0), physic al, D(0000), M(0) pin09, enabled , level, high, V(20), IRR(0), S(0), logical , D(0002), M(0) pin0a, disabled, edge , high, V(00), IRR(0), S(0), physic al, D(0000), M(0) pin0b, disabled, edge , high, V(00), IRR(0), S(0), physic al, D(0000), M(0) pin0c, enabled , edge , high, V(21), IRR(0), S(0), logical , D(0002), M(0) pin0d, disabled, edge , high, V(00), IRR(0), S(0), physic al, D(0000), M(0) pin0e, disabled, edge , high, V(00), IRR(0), S(0), physic al, D(0000), M(0) pin0f, disabled, edge , high, V(00), IRR(0), S(0), physic al, D(0000), M(0) pin10, disabled, edge , high, V(00), IRR(0), S(0), physic al, D(0000), M(0) pin11, disabled, edge , high, V(00), IRR(0), S(0), physic al, D(0000), M(0) pin12, disabled, edge , high, V(00), IRR(0), S(0), physic al, D(0000), M(0) pin13, disabled, edge , high, V(00), IRR(0), S(0), physic al, D(0000), M(0) pin14, disabled, edge , high, V(00), IRR(0), S(0), physic al, D(0000), M(0) pin15, disabled, edge , high, V(00), IRR(0), S(0), physic al, D(0000), M(0) pin16, disabled, edge , high, V(00), IRR(0), S(0), physic al, D(0000), M(0) pin17, disabled, edge , high, V(00), IRR(0), S(0), physic al, D(0000), M(0) IRQ to pin mappings: IRQ0 -> 0:2 IRQ1 -> 0:1 IRQ3 -> 0:3 IRQ4 -> 0:4 IRQ5 -> 0:5 IRQ6 -> 0:6 IRQ7 -> 0:7 IRQ8 -> 0:8 IRQ9 -> 0:9 IRQ10 -> 0:10 IRQ11 -> 0:11 IRQ12 -> 0:12 IRQ13 -> 0:13 IRQ14 -> 0:14 IRQ15 -> 0:15 .................................... done. sched_clock: Marking stable (95067722166, 553053637)->(95942942280, -322166477) Loading compiled-in X.509 certificates Key type .fscrypt registered Key type fscrypt-provisioning registered Key type encrypted registered RIO: rio_register_scan for mport_id=-1 mdio_bus dsa-0.0: using lookup tables for GPIO lookup mdio_bus dsa-0.0: No GPIO consumer reset found mdio_bus dsa-0.0:00: using lookup tables for GPIO lookup mdio_bus dsa-0.0:00: No GPIO consumer reset found mdio_bus dsa-0.0:01: using lookup tables for GPIO lookup mdio_bus dsa-0.0:01: No GPIO consumer reset found mdio_bus dsa-0.0:02: using lookup tables for GPIO lookup mdio_bus dsa-0.0:02: No GPIO consumer reset found mdio_bus dsa-0.0:03: using lookup tables for GPIO lookup mdio_bus dsa-0.0:03: No GPIO consumer reset found dsa-loop fixed-0:1f: skipping link registration for CPU port 5 dsa-loop fixed-0:1f lan1 (uninitialized): PHY [dsa-0.0:00] driver [Generic PHY] (irq=POLL) dsa-loop fixed-0:1f lan2 (uninitialized): PHY [dsa-0.0:01] driver [Generic PHY] (irq=POLL) dsa-loop fixed-0:1f lan3 (uninitialized): PHY [dsa-0.0:02] driver [Generic PHY] (irq=POLL) dsa-loop fixed-0:1f lan4 (uninitialized): PHY [dsa-0.0:03] driver [Generic PHY] (irq=POLL) DSA: tree 0 setup dsa-loop fixed-0:1f: DSA mockup driver: 0x1f gtp: GTP module loaded (pdp ctx size 84 bytes) 8021q: adding VLAN 0 to HW filter on device bond0 8021q: adding VLAN 0 to HW filter on device eth0 e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX IP-Config: Failed to open gretap0 IP-Config: Failed to open erspan0 dsa-loop fixed-0:1f lan1: configuring for phy/gmii link mode dsa-loop fixed-0:1f lan1: Link is Up - 100Mbps/Full - flow control off dsa-loop fixed-0:1f lan2: configuring for phy/gmii link mode dsa-loop fixed-0:1f lan2: Link is Up - 100Mbps/Full - flow control off dsa-loop fixed-0:1f lan3: configuring for phy/gmii link mode dsa-loop fixed-0:1f lan3: Link is Up - 100Mbps/Full - flow control off dsa-loop fixed-0:1f lan4: configuring for phy/gmii link mode dsa-loop fixed-0:1f lan4: Link is Up - 100Mbps/Full - flow control off workqueue: phylink_resolve hogged CPU for >10000us 4 times, consider switching to WQ_UNBOUND Sending DHCP requests . Unknown ARP type 0xfffe for device wwan0 Unknown ARP type 0xfffe for device wwan1 , Unknown ARP type 0xfffe for device wwan0 Unknown ARP type 0xfffe for device wwan1 OK IP-Config: Got DHCP answer from 10.0.2.2, my address is 10.0.2.15 IP-Config: Complete: device=eth0, hwaddr=52:54:00:12:34:56, ipaddr=10.0.2.15, mask=255.255.255.0, gw=10.0.2.2 host=vm-meta-99, domain=, nis-domain=(none) bootserver=10.0.2.2, rootserver=10.0.2.2, rootpath= nameserver0=10.0.2.3 dsa-loop fixed-0:1f lan1: Link is Down dsa-loop fixed-0:1f lan2: Link is Down dsa-loop fixed-0:1f lan3: Link is Down dsa-loop fixed-0:1f lan4: Link is Down rxperf: Server registering rxperf: Can't set up rxperf socket: -97 rxperf: Failed to register: -97 cfg80211: Loading compiled-in X.509 certificates for regulatory database Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 kunit: disabled platform regulatory.0: Falling back to sysfs fallback for: regulatory.db Freeing unused kernel image (initmem) memory: 1204K Write protecting kernel text and read-only data: 41336k Run /init as init process with arguments: /init with environment: HOME=/ TERM=linux RESULT_ROOT=/result/rcuscale/300s-rcu/vm-snb/debian-11.1-i386-20220923.cgz/i386-randconfig-052-20250205/gcc-12/b04e317b522630b46f78ee62ecbdc5734e8d43de/153 BOOT_IMAGE=/pkg/linux/i386-randconfig-052-20250205/gcc-12/b04e317b522630b46f78ee62ecbdc5734e8d43de/vmlinuz-6.13.0-rc2-00014-gb04e317b5226 branch=linux-devel/devel-hourly-20250204-222340 job=/lkp/jobs/scheduled/vm-meta-99/rcuscale-300s-rcu-debian-11.1-i386-20220923.cgz-i386-randconfig-052-20250205-b04e317b5226-20250211-1026503-1mxtlrf-569.yaml user=lkp ARCH=i386 kconfig=i386-randconfig-052-20250205 commit=b04e317b522630b46f78ee62ecbdc5734e8d43de intremap=posted_msi max_uptime=1200 LKP_SERVER=internal-lkp-server selinux=0 prompt_ramdisk=0 vga=normal ia32_emulation=on riscv_isa_fallback=1 systemd[1]: RTC configured in localtime, applying delta of 0 minutes to system time. Welcome to Debian GNU/Linux 11 (bullseye)! random: crng init done Created slice system-getty.slice. Created slice system-modprobe.slice. Created slice User and Session Slice. Reached target Local Encrypted Volumes. Reached target Paths. Reached target Slices. Reached target Swap. Listening on RPCbind Server Activation Socket. Listening on Syslog Socket. Listening on initctl Compatibility Named Pipe. Listening on Journal Socket (/dev/log). Listening on Journal Socket. Listening on udev Control Socket. Listening on udev Kernel Socket. Mounting Huge Pages File System... Mounting POSIX Message Queue File System... Mounting RPC Pipe File System... Mounting Kernel Trace File System... Starting Load Kernel Module configfs... Starting Load Kernel Module drm... Starting Load Kernel Module fuse... Starting Journal Service... Starting Load Kernel Modules... Starting Remount Root and Kernel File Systems... Starting Coldplug All udev Devices... Mounted Huge Pages File System. Mounted POSIX Message Queue File System. Failed to mount RPC Pipe File System. See 'systemctl status run-rpc_pipefs.mount' for details. Mounted Kernel Trace File System. Finished Load Kernel Module configfs. Finished Load Kernel Module drm. Finished Load Kernel Module fuse. Finished Load Kernel Modules. Reached target NFS client services. Mounting FUSE Control File System... Mounting Kernel Configuration File System... Starting Apply Kernel Variables... Finished Remount Root and Kernel File Systems. Mounted FUSE Control File System. Mounted Kernel Configuration File System. Starting Load/Save Random Seed... Starting Create System Users... Finished Apply Kernel Variables. Finished Load/Save Random Seed. Finished Create System Users. Starting Create Static Device Nodes in /dev... Finished Create Static Device Nodes in /dev. Reached target Local File Systems (Pre). Reached target Local File Systems. Starting Preprocess NFS configuration... Finished Preprocess NFS configuration. Started Journal Service. Starting Flush Journal to Persistent Storage... Started Rule-based Manager for Device Events and Files. Finished Flush Journal to Persistent Storage. Starting Create Volatile Files and Directories... Finished Create Volatile Files and Directories. Starting RPC bind portmap service... Starting Update UTMP about System Boot/Shutdown... Started RPC bind portmap service. Reached target Remote File Systems (Pre). Reached target Remote File Systems. Reached target RPC Port Mapper. Failed to start Update UTMP about System Boot/Shutdown. See 'systemctl status systemd-update-utmp.service' for details. A start job is running for Coldplug All udev Devices (13s / no limit) Reached target System Initialization. Started Daily apt download activities. Started Daily apt upgrade and clean activities. Started Discard unused blocks once a week. Started Daily rotation of log files. Started Daily Cleanup of Temporary Directories. Reached target Timers. Listening on D-Bus System Message Bus Socket. Reached target Sockets. Reached target Basic System. Started Regular background program processing daemon. Started D-Bus System Message Bus. Starting Helper to synchronize boot up for ifupdown... Starting LSB: OpenIPMI Driver init script... Starting System Logging Service... Starting User Login Management... See 'systemctl status e2scrub_reap.service' for details. Started System Logging Service. Finished Helper to synchronize boot up for ifupdown. Starting Raise network interfaces... Starting LSB: Load kernel image with kexec... Started User Login Management. Failed to start LSB: OpenIPMI Driver init script. See 'systemctl status openipmi.service' for details. Finished Raise network interfaces. Reached target Network. Starting LKP bootstrap... Starting /etc/rc.local Compatibility... Starting OpenBSD Secure Shell server... Starting Permit User Sessions... Started LSB: Load kernel image with kexec. Finished Permit User Sessions. Started LKP bootstrap. LKP: ttyS0: 269: skip deploy intel ucode as no ucode is specified Started OpenBSD Secure Shell server. LKP: ttyS0: 269: Kernel tests: Boot OK! LKP: ttyS0: 269: HOSTNAME vm-snb, MAC 52:59:d4:73:77:9e, kernel 6.13.0-rc2-00014-gb04e317b5226 1 Reached target Hardware activated USB gadget. cfg80211: failed to load regulatory.db Starting Load/Save RF Kill Switch Status... Started Load/Save RF Kill Switch Status. LKP: ttyS0: 269: /lkp/lkp/src/bin/run-lkp /lkp/jobs/scheduled/vm-meta-99/rcuscale-300s-rcu-debian-11.1-i386-20220923.cgz-i386-randconfig-052-20250205-b04e317b5226-20250211-1026503-1mxtlrf-569.yaml workqueue: e1000_watchdog hogged CPU for >10000us 4 times, consider switching to WQ_UNBOUND is_virt=true workqueue: e1000_watchdog hogged CPU for >10000us 5 times, consider switching to WQ_UNBOUND lkp: kernel tainted state: 131072 LKP: stdout: 269: Kernel tests: Boot OK! mount: /sys/kernel/debug: mount point does not exist. LKP: stdout: 269: HOSTNAME vm-snb, MAC 52:59:d4:73:77:9e, kernel 6.13.0-rc2-00014-gb04e317b5226 1 install debs round one: dpkg -i --force-confdef --force-depends /opt/deb/gawk_1%3a5.1.0-1_i386.deb Selecting previously unselected package gawk. (Reading database ... 16439 files and directories currently installed.) Preparing to unpack .../deb/gawk_1%3a5.1.0-1_i386.deb ... Unpacking gawk (1:5.1.0-1) ... Setting up gawk (1:5.1.0-1) ... NO_NETWORK= mount debug /sys/kernel/debug -t debugfs rootfs on / type rootfs (rw) proc on /proc type proc (rw,nosuid,nodev,noexec,relatime) sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime) devtmpfs on /dev type devtmpfs (rw,nosuid,noexec,size=4096k,nr_inodes=65536,mode=755) securityfs on /sys/kernel/security type securityfs (rw,nosuid,nodev,noexec,relatime) tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev) devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000) tmpfs on /run type tmpfs (rw,nosuid,nodev,size=601768k,nr_inodes=819200,mode=755) tmpfs on /run/lock type tmpfs (rw,nosuid,nodev,noexec,relatime,size=5120k) cgroup2 on /sys/fs/cgroup type cgroup2 (rw,nosuid,nodev,noexec,relatime,nsdelegate,memory_recursiveprot) bpf on /sys/fs/bpf type bpf (rw,nosuid,nodev,noexec,relatime,mode=700) systemd-1 on /proc/sys/fs/binfmt_misc type autofs (rw,relatime,fd=29,pgrp=1,timeout=0,minproto=5,maxproto=5,direct) hugetlbfs on /dev/hugepages type hugetlbfs (rw,relatime,pagesize=4M) mqueue on /dev/mqueue type mqueue (rw,nosuid,nodev,noexec,relatime) tracefs on /sys/kernel/tracing type tracefs (rw,nosuid,nodev,noexec,relatime) fusectl on /sys/fs/fuse/connections type fusectl (rw,nosuid,nodev,noexec,relatime) configfs on /sys/kernel/config type configfs (rw,nosuid,nodev,noexec,relatime) tmp on /tmp type tmpfs (rw,relatime) nodev sysfs nodev tmpfs nodev proc nodev cgroup nodev cgroup2 nodev cpuset nodev devtmpfs nodev binfmt_misc nodev configfs nodev tracefs nodev securityfs nodev sockfs nodev bpf nodev pipefs nodev ramfs nodev hugetlbfs nodev devpts nodev autofs nodev fuse nodev fusectl nodev virtiofs nodev mqueue nodev ibmasmfs nodev gadgetfs LKP: stdout: 269: /lkp/lkp/src/bin/run-lkp /lkp/jobs/scheduled/vm-meta-99/rcuscale-300s-rcu-debian-11.1-i386-20220923.cgz-i386-randconfig-052-20250205-b04e317b5226-20250211-1026503-1mxtlrf-569.yaml RESULT_ROOT=/result/rcuscale/300s-rcu/vm-snb/debian-11.1-i386-20220923.cgz/i386-randconfig-052-20250205/gcc-12/b04e317b522630b46f78ee62ecbdc5734e8d43de/153 job=/lkp/jobs/scheduled/vm-meta-99/rcuscale-300s-rcu-debian-11.1-i386-20220923.cgz-i386-randconfig-052-20250205-b04e317b5226-20250211-1026503-1mxtlrf-569.yaml result_service: raw_upload, RESULT_MNT: /internal-lkp-server/result, RESULT_ROOT: /internal-lkp-server/result/rcuscale/300s-rcu/vm-snb/debian-11.1-i386-20220923.cgz/i386-randconfig-052-20250205/gcc-12/b04e317b522630b46f78ee62ecbdc5734e8d43de/153, TMP_RESULT_ROOT: /tmp/lkp/result run-job /lkp/jobs/scheduled/vm-meta-99/rcuscale-300s-rcu-debian-11.1-i386-20220923.cgz-i386-randconfig-052-20250205-b04e317b5226-20250211-1026503-1mxtlrf-569.yaml /usr/bin/wget -q --timeout=3600 --tries=1 --local-encoding=UTF-8 http://internal-lkp-server:80/~lkp/cgi-bin/lkp-jobfile-append-var?job_file=/lkp/jobs/scheduled/vm-meta-99/rcuscale-300s-rcu-debian-11.1-i386-20220923.cgz-i386-randconfig-052-20250205-b04e317b5226-20250211-1026503-1mxtlrf-569.yaml&job_state=running -O /dev/null target ucode: check_nr_cpu CPU(s): 2 On-line CPU(s) list: 0,1 Thread(s) per core: 1 Core(s) per socket: 1 Socket(s): 2 2025-02-11 11:33:39 depmod Started /etc/rc.local Compatibility. Reached target Login Prompts. Reached target Multi-User System. Starting watchdog daemon... Started watchdog daemon. Reached target Graphical Interface. workqueue: e1000_watchdog hogged CPU for >10000us 7 times, consider switching to WQ_UNBOUND INFO: task UVCG:82 blocked for more than 491 seconds. Tainted: G T 6.13.0-rc2-00014-gb04e317b5226 #1 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:UVCG state:D stack:0 pid:82 tgid:82 ppid:2 flags:0x00004000 Call Trace: __schedule+0x45d/0x484 ? __this_cpu_preempt_check+0xf/0x11 schedule+0x3e/0x58 schedule_preempt_disabled+0x12/0x1e kthread+0x97/0x185 ? kthread_flush_work+0x83/0x83 ? kthread_is_per_cpu+0x17/0x17 ret_from_fork+0x19/0x2c ? kthread_is_per_cpu+0x17/0x17 ret_from_fork_asm+0x12/0x20 entry_INT80_32+0x10d/0x112 Showing all locks held in the system: 1 lock held by khungtaskd/32: #0: c3baa3d4 (rcu_read_lock){....}-{1:3}, at: rcu_lock_acquire+0x0/0x21 1 lock held by in:imklog/227: #0: ecd0e884 (&f->f_pos_lock){+.+.}-{4:4}, at: fdget_pos+0x3e/0x43 1 lock held by dmesg/494: 2 locks held by depmod/567: ============================================= Kernel panic - not syncing: hung_task: blocked tasks CPU: 0 UID: 0 PID: 32 Comm: khungtaskd Tainted: G T 6.13.0-rc2-00014-gb04e317b5226 #1 78ab3595737b7bb7ccfbfed5c1dcb65e25af99a7 Tainted: [T]=RANDSTRUCT Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-debian-1.16.2-1 04/01/2014 Call Trace: dump_stack_lvl+0x4f/0x8d dump_stack+0xd/0x10 panic+0xe5/0x266 check_hung_uninterruptible_tasks+0x1fb/0x203 watchdog+0x5a/0x6e kthread+0x180/0x185 ? check_hung_uninterruptible_tasks+0x203/0x203 ? kthread_is_per_cpu+0x17/0x17 ret_from_fork+0x19/0x2c ? kthread_is_per_cpu+0x17/0x17 ret_from_fork_asm+0x12/0x20 entry_INT80_32+0x10d/0x112 Kernel Offset: disabled Kboot worker: lkp-worker31 Elapsed time: 1080 kvm=( qemu-system-x86_64 -enable-kvm -cpu SandyBridge -kernel $kernel -initrd initrd-vm-meta-99.cgz -m 16384 -smp 2 -device e1000,netdev=net0 -netdev user,id=net0,hostfwd=tcp::32032-:22 -boot order=nc -no-reboot -device i6300esb -device pci-testdev -watchdog-action debug -rtc base=localtime -serial stdio -display none -monitor null ) append=( ip=::::vm-meta-99::dhcp root=/dev/ram0 RESULT_ROOT=/result/rcuscale/300s-rcu/vm-snb/debian-11.1-i386-20220923.cgz/i386-randconfig-052-20250205/gcc-12/b04e317b522630b46f78ee62ecbdc5734e8d43de/153 BOOT_IMAGE=/pkg/linux/i386-randconfig-052-20250205/gcc-12/b04e317b522630b46f78ee62ecbdc5734e8d43de/vmlinuz-6.13.0-rc2-00014-gb04e317b5226 branch=linux-devel/devel-hourly-20250204-222340 job=/job-script user=lkp ARCH=i386 kconfig=i386-randconfig-052-20250205 commit=b04e317b522630b46f78ee62ecbdc5734e8d43de mem=4G intremap=posted_msi vmalloc=256M initramfs_async=0 page_owner=on carrier_timeout=60 rcupdate.rcu_self_test=0 max_uptime=1200 result_service=tmpfs selinux=0 debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 net.ifnames=0 printk.devkmsg=on panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 drbd.minor_count=8 systemd.log_level=err ignore_loglevel console=tty0 earlyprintk=ttyS0,115200 console=ttyS0,115200 vga=normal rw mem=4G rcuperf.shutdown=0 rcuscale.shutdown=0 refscale.shutdown=0 watchdog_thresh=240 audit=0 kunit.enable=0 ia32_emulation=on riscv_isa_fallback=1 ) "${kvm[@]}" -append "${append[*]}"