2025-05-21 07:10:57 mkdir -p /mnt/nvme-group-00 2025-05-21 07:10:57 mount /dev/sdb2 /mnt/nvme-group-00 2025-05-21 07:10:58 sed "s:^:nvme/:" /lkp/benchmarks/blktests/tests/nvme-group-00 2025-05-21 07:10:58 ./check -o /mnt/nvme-group-00 nvme/002 nvme/003 nvme/004 nvme/005 nvme/006 nvme/008 nvme/010 nvme/012 nvme/014 nvme/016 nvme/017 nvme/018 nvme/019 nvme/*** => sdb2 [not run] /dev/sdb2 is not a NVMe device nvme/002 (tr=rdma) (create many subsystems and test discovery) nvme/002 (tr=rdma) (create many subsystems and test discovery) [not run] nvme_trtype=rdma is not supported in this test nvme/003 (tr=rdma) (test if we're sending keep-alives to a discovery controller) nvme/003 (tr=rdma) (test if we're sending keep-alives to a discovery controller) [passed] runtime ... 10.327s nvme/004 (tr=rdma) (test nvme and nvmet UUID NS descriptors) nvme/004 (tr=rdma) (test nvme and nvmet UUID NS descriptors) [passed] runtime ... 0.654s nvme/005 (tr=rdma) (reset local loopback target) nvme/005 (tr=rdma) (reset local loopback target) [passed] runtime ... 0.701s nvme/006 (tr=rdma bd=device) (create an NVMeOF target) nvme/006 (tr=rdma bd=device) (create an NVMeOF target) [passed] runtime ... 0.162s nvme/006 (tr=rdma bd=file) (create an NVMeOF target) nvme/006 (tr=rdma bd=file) (create an NVMeOF target) [failed] runtime ... 0.150s --- tests/nvme/006.out 2025-05-20 16:48:33.000000000 +0000 +++ /mnt/nvme-group-00/nodev_tr_rdma_bd_file/nvme/006.out.bad 2025-05-21 07:11:14.139066379 +0000 @@ -1,2 +1,3 @@ Running nvme/006 +common/nvme: line 684: printf: write error: Invalid argument Test complete nvme/008 (tr=rdma bd=device) (create an NVMeOF host) nvme/008 (tr=rdma bd=device) (create an NVMeOF host) [passed] runtime ... 0.544s nvme/008 (tr=rdma bd=file) (create an NVMeOF host) nvme/008 (tr=rdma bd=file) (create an NVMeOF host) [failed] runtime ... 0.460s --- tests/nvme/008.out 2025-05-20 16:48:33.000000000 +0000 +++ /mnt/nvme-group-00/nodev_tr_rdma_bd_file/nvme/008.out.bad 2025-05-21 07:11:16.157066417 +0000 @@ -1,3 +1,5 @@ Running nvme/008 +common/nvme: line 684: printf: write error: Invalid argument +No namespaces found disconnected 1 controller(s) Test complete nvme/010 (tr=rdma bd=device) (run data verification fio job) nvme/010 (tr=rdma bd=device) (run data verification fio job) [passed] runtime ... 63.526s nvme/010 (tr=rdma bd=file) (run data verification fio job) nvme/010 (tr=rdma bd=file) (run data verification fio job) [failed] runtime ... 0.647s --- tests/nvme/010.out 2025-05-20 16:48:33.000000000 +0000 +++ /mnt/nvme-group-00/nodev_tr_rdma_bd_file/nvme/010.out.bad 2025-05-21 07:12:21.966067641 +0000 @@ -1,3 +1,8 @@ Running nvme/010 +common/nvme: line 684: printf: write error: Invalid argument +fio: pid=0, err=21/file:filesetup.c:150, func=unlink, error=Is a directory +fio exited with status 1 +fio: pid=0, err=21/file:filesetup.c:150, func=unlink, error=Is a directory +4;fio-3.33;verify;0;21;0;0;0;0;0;0;0.000000;0.000000;0;0;0.000000;0.000000;1.000000%=0;5.000000%=0;10.000000%=0;20.000000%=0;30.000000%=0;40.000000%=0;50.000000%=0;60.000000%=0;70.000000%=0;80.000000%=0;90.000000%=0;95.000000%=0;99.000000%=0;99.500000%=0;99.900000%=0;99.950000%=0;99.990000%=0;0%=0;0%=0;0%=0;0;0;0.000000;0.000000;0;0;0.000000%;0.000000;0.000000;0;0;0;0;0;0;0.000000;0.000000;0;0;0.000000;0.000000;1.000000%=0;5.000000%=0;10.000000%=0;20.000000%=0;30.000000%=0;40.000000%=0;50.000000%=0;60.000000%=0;70.000000%=0;80.000000%=0;90.000000%=0;95.000000%=0;99.000000%=0;99.500000%=0;99.900000%=0;99.950000%=0;99.990000%=0;0%=0;0%=0;0%=0;0;0;0.000000;0.000000;0;0;0.000000%;0.000000;0.000000;0;0;0;0;0;0;0.000000;0.000000;0;0;0.000000;0.000000;1.000000%=0;5.000000%=0;10.000000%=0;20.000000%=0;30.000000%=0;40.000000%=0;50.000000%=0;60.000000%=0;70.000000%=0;80.000000%=0;90.000000%=0;95.000000%=0;99.000000%=0;99.500000%=0;99.900000%=0;99.950000%=0;99.990000%=0;0%=0;0%=0;0%=0;0;0;0.000000;0.000000;0;0;0.000000%;0.000000;0.000000;0.000000%;0.000000%;0;0;0;0.0%;0.0%;0.0%;0.0%;0.0%;0.0%;0.0%;-nan%;0.00%;0.00%;0.00%;0.00%;0.00%;0.00%;0.00%;0.00%;0.00%;0.00%;0.00%;0.00%;0.00%;0.00%;0.00%;0.00%;0.00%;0.00%;0.00%;0.00%;0.00% disconnected 1 controller(s) ... (Run 'diff -u tests/nvme/010.out /mnt/nvme-group-00/nodev_tr_rdma_bd_file/nvme/010.out.bad' to see the entire diff) nvme/012 (tr=rdma bd=device) (run mkfs and data verification fio) nvme/012 (tr=rdma bd=device) (run mkfs and data verification fio) [failed] runtime ... 67.758s something found in dmesg: [ 129.669330] run blktests nvme/012 at 2025-05-21 07:12:22 [ 129.761720] loop0: detected capacity change from 0 to 2097152 [ 129.779717] nvmet: adding nsid 1 to subsystem blktests-subsystem-1 [ 129.800348] nvmet_rdma: enabling port 0 (192.168.3.73:4420) [ 129.850288] nvmet: Created nvm controller 1 for subsystem blktests-subsystem-1 for NQN nqn.2014-08.org.nvmexpress:uuid:0f01fb42-9f7f-4856-b0b3-51e60b8de349. [ 129.867518] nvme nvme0: creating 8 I/O queues. [ 129.935166] nvme nvme0: mapped 8/0/0 default/read/poll queues. [ 129.947830] nvme nvme0: new ctrl: NQN "blktests-subsystem-1", addr 192.168.3.73:4420, hostnqn: nqn.2014-08.org.nvmexpress:uuid:0f01fb42-9f7f-4856-b0b3-51e60b8de349 [ 130.050803] nvme0c0n1: Dataset Management(0x9) @ LBA 0, 2097152 blocks, ONCS Not Supported (sct 0x1 / sc 0x83) MORE DNR [ 130.062333] operation not supported error, dev nvme0c0n1, sector 0 op 0x3:(DISCARD) flags 0x2000800 phys_seg 1 prio class 0 ... (See '/mnt/nvme-group-00/nodev_tr_rdma_bd_device/nvme/012.dmesg' for the entire message) nvme/012 (tr=rdma bd=file) (run mkfs and data verification fio) nvme/012 (tr=rdma bd=file) (run mkfs and data verification fio) [failed] runtime ... 0.454s --- tests/nvme/012.out 2025-05-20 16:48:33.000000000 +0000 +++ /mnt/nvme-group-00/nodev_tr_rdma_bd_file/nvme/012.out.bad 2025-05-21 07:13:31.935068942 +0000 @@ -1,3 +1,5 @@ Running nvme/012 +common/nvme: line 684: printf: write error: Invalid argument +FAIL: fio verify failed disconnected 1 controller(s) Test complete nvme/014 (tr=rdma bd=device) (flush a command from host) nvme/014 (tr=rdma bd=device) (flush a command from host) [passed] runtime ... 12.970s nvme/014 (tr=rdma bd=file) (flush a command from host) nvme/016 (tr=rdma) (create/delete many NVMeOF block device-backed ns and test discovery) nvme/016 (tr=rdma) (create/delete many NVMeOF block device-backed ns and test discovery) [not run] nvme_trtype=rdma is not supported in this test nvme/017 (tr=rdma) (create/delete many file-ns and test discovery) nvme/017 (tr=rdma) (create/delete many file-ns and test discovery) [not run] nvme_trtype=rdma is not supported in this test nvme/018 (tr=rdma) (unit test NVMe-oF out of range access on a file backend) nvme/018 (tr=rdma) (unit test NVMe-oF out of range access on a file backend) [failed] runtime ... 1.403s --- tests/nvme/018.out 2025-05-20 16:48:33.000000000 +0000 +++ /mnt/nvme-group-00/nodev_tr_rdma/nvme/018.out.bad 2025-05-21 07:13:48.163069244 +0000 @@ -1,3 +1,8 @@ Running nvme/018 +mkdir: cannot create directory ‘/sys/kernel/config/nvmet//subsystems/blktests-subsystem-1/namespaces/1’: File exists +common/nvme: line 684: printf: write error: Invalid argument +FAIL target setup failed. stale host configuration found +blockdev: could not get device size +blockdev: ioctl error on BLKBSZGET: Inappropriate ioctl for device disconnected 1 controller(s) ... (Run 'diff -u tests/nvme/018.out /mnt/nvme-group-00/nodev_tr_rdma/nvme/018.out.bad' to see the entire diff) nvme/019 (tr=rdma bd=device) (test NVMe DSM Discard command) nvme/019 (tr=rdma bd=device) (test NVMe DSM Discard command) [failed] runtime ... 0.580s --- tests/nvme/019.out 2025-05-20 16:48:33.000000000 +0000 +++ /mnt/nvme-group-00/nodev_tr_rdma_bd_device/nvme/019.out.bad 2025-05-21 07:13:49.280069265 +0000 @@ -1,4 +1,4 @@ Running nvme/019 -NVMe DSM: success +NVMe status: Command Size Limit Exceeded(0x6183) disconnected 1 controller(s) Test complete nvme/019 (tr=rdma bd=file) (test NVMe DSM Discard command) nvme/019 (tr=rdma bd=file) (test NVMe DSM Discard command) [failed] runtime ... 0.450s --- tests/nvme/019.out 2025-05-20 16:48:33.000000000 +0000 +++ /mnt/nvme-group-00/nodev_tr_rdma_bd_file/nvme/019.out.bad 2025-05-21 07:13:50.277069283 +0000 @@ -1,4 +1,28 @@ Running nvme/019 -NVMe DSM: success +common/nvme: line 684: printf: write error: Invalid argument +/dev is not a block or character device +[1mUsage: nvme dsm <device> [OPTIONS][0m + +The Dataset Management command is used by the host to indicate attributes for ... (Run 'diff -u tests/nvme/019.out /mnt/nvme-group-00/nodev_tr_rdma_bd_file/nvme/019.out.bad' to see the entire diff)