Decompressing Linux... No EFI environment detected. Parsing ELF... No relocation needed... done. Booting the kernel (entry_offset: 0x0000000005c3fc50). Linux version 6.18.0-rc5-00215-g45f3d9974e38 (kbuild@d520b2ac927a) (gcc-14 (Debian 14.2.0-19) 14.2.0, GNU ld (GNU Binutils for Debian) 2.44) #1 SMP PREEMPT_DYNAMIC Tue Nov 25 10:23:51 CST 2025 Command line: ip=::::lkp-hsw-d01::dhcp root=/dev/ram0 RESULT_ROOT=/result/nvml/util-non-pmem/lkp-hsw-d01/debian-13-x86_64-20250902.cgz/x86_64-rhel-9.4-func/gcc-14/45f3d9974e382495db777e0290a32ba0cd6f454b/0 BOOT_IMAGE=/pkg/linux/x86_64-rhel-9.4-func/gcc-14/45f3d9974e382495db777e0290a32ba0cd6f454b/vmlinuz-6.18.0-rc5-00215-g45f3d9974e38 branch=linux-devel/devel-hourly-20251118-225732 job=/lkp/jobs/scheduled/lkp-hsw-d01/nvml-util-non-pmem-debian-13-x86_64-20250902.cgz-45f3d9974e38-20251125-90233-f2lmgn-0.yaml user=lkp ARCH=x86_64 kconfig=x86_64-rhel-9.4-func commit=45f3d9974e382495db777e0290a32ba0cd6f454b intremap=posted_msi max_uptime=14400 LKP_SERVER=internal-lkp-server nokaslr selinux=0 debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 net.ifnames=0 printk.devkmsg=on panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 drbd.minor_count=8 systemd.log_level=err ignore_loglevel console=tty0 earlyprintk=ttyS0,115200 console=ttyS0,115200 vga=normal rw x86/CPU: Running old microcode BIOS-provided physical RAM map: BIOS-e820: [mem 0x0000000000000100-0x00000000000917ff] usable BIOS-e820: [mem 0x0000000000091800-0x000000000009ffff] reserved BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved BIOS-e820: [mem 0x0000000000100000-0x00000000d16effff] usable BIOS-e820: [mem 0x00000000d16f0000-0x00000000d16f6fff] ACPI NVS BIOS-e820: [mem 0x00000000d16f7000-0x00000000d1b24fff] usable BIOS-e820: [mem 0x00000000d1b25000-0x00000000d1fa5fff] reserved BIOS-e820: [mem 0x00000000d1fa6000-0x00000000d7eeafff] usable BIOS-e820: [mem 0x00000000d7eeb000-0x00000000d7ffffff] reserved BIOS-e820: [mem 0x00000000d8000000-0x00000000d875ffff] usable BIOS-e820: [mem 0x00000000d8760000-0x00000000d87fffff] reserved BIOS-e820: [mem 0x00000000d8800000-0x00000000d8fadfff] usable BIOS-e820: [mem 0x00000000d8fae000-0x00000000d8ffffff] ACPI data BIOS-e820: [mem 0x00000000d9000000-0x00000000da71bfff] usable BIOS-e820: [mem 0x00000000da71c000-0x00000000da7fffff] ACPI NVS BIOS-e820: [mem 0x00000000da800000-0x00000000dbe11fff] usable BIOS-e820: [mem 0x00000000dbe12000-0x00000000dbffffff] reserved BIOS-e820: [mem 0x00000000dd000000-0x00000000df1fffff] reserved BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved BIOS-e820: [mem 0x0000000100000000-0x000000021edfffff] usable printk: debug: ignoring loglevel setting. printk: legacy bootconsole [earlyser0] enabled NX (Execute Disable) protection: active APIC: Static calls initialized SMBIOS 2.7 present. DMI: Dell Inc. OptiPlex 9020/0DNKMN, BIOS A05 12/05/2013 DMI: Memory slots populated: 2/4 tsc: Fast TSC calibration using PIT tsc: Detected 3392.284 MHz processor e820: update [mem 0x00000000-0x00000fff] usable ==> reserved e820: remove [mem 0x000a0000-0x000fffff] usable last_pfn = 0x21ee00 max_arch_pfn = 0x400000000 total RAM covered: 8126M Found optimal setting for mtrr clean up gran_size: 64K chunk_size: 64M num_reg: 9 lose cover RAM: 0G MTRR map: 9 entries (5 fixed + 4 variable; max 25), built from 10 variable MTRRs x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT e820: update [mem 0xdd000000-0xffffffff] usable ==> reserved last_pfn = 0xdbe12 max_arch_pfn = 0x400000000 Scan for SMP in [mem 0x00000000-0x000003ff] Scan for SMP in [mem 0x0009fc00-0x0009ffff] Scan for SMP in [mem 0x000f0000-0x000fffff] found SMP MP-table at [mem 0x000fd940-0x000fd94f] mpc: fd6a0-fd8bc Using GB pages for direct mapping RAMDISK: [mem 0x1e33c5000-0x2175fffff] ACPI: Early table checksum verification disabled ACPI: RSDP 0x00000000000F0490 000024 (v02 DELL ) ACPI: XSDT 0x00000000D8FEE088 00008C (v01 DELL CBX3 01072009 AMI 00010013) ACPI: FACP 0x00000000D8FF94A0 00010C (v05 DELL CBX3 01072009 AMI 00010013) ACPI: DSDT 0x00000000D8FEE1A0 00B2FD (v02 DELL CBX3 00000014 INTL 20091112) ACPI: FACS 0x00000000DA7FE080 000040 ACPI: APIC 0x00000000D8FF95B0 000092 (v03 DELL CBX3 01072009 AMI 00010013) ACPI: FPDT 0x00000000D8FF9648 000044 (v01 DELL CBX3 01072009 AMI 00010013) ACPI: SLIC 0x00000000D8FF9690 000176 (v03 DELL CBX3 01072009 MSFT 00010013) ACPI: LPIT 0x00000000D8FF9808 00005C (v01 DELL CBX3 00000000 AMI. 00000005) ACPI: SSDT 0x00000000D8FF9868 000539 (v01 PmRef Cpu0Ist 00003000 INTL 20120711) ACPI: SSDT 0x00000000D8FF9DA8 000AD8 (v01 PmRef CpuPm 00003000 INTL 20120711) ACPI: SSDT 0x00000000D8FFA880 0001C7 (v01 PmRef LakeTiny 00003000 INTL 20120711) ACPI: HPET 0x00000000D8FFAA48 000038 (v01 DELL CBX3 01072009 AMI. 00000005) ACPI: SSDT 0x00000000D8FFAA80 00036D (v01 SataRe SataTabl 00001000 INTL 20120711) ACPI: MCFG 0x00000000D8FFADF0 00003C (v01 DELL CBX3 01072009 MSFT 00000097) ACPI: SSDT 0x00000000D8FFAE30 003406 (v01 SaSsdt SaSsdt 00003000 INTL 20091112) ACPI: ASF! 0x00000000D8FFE238 0000A5 (v32 INTEL HCG 00000001 TFSM 000F4240) ACPI: Reserving FACP table memory at [mem 0xd8ff94a0-0xd8ff95ab] ACPI: Reserving DSDT table memory at [mem 0xd8fee1a0-0xd8ff949c] ACPI: Reserving FACS table memory at [mem 0xda7fe080-0xda7fe0bf] ACPI: Reserving APIC table memory at [mem 0xd8ff95b0-0xd8ff9641] ACPI: Reserving FPDT table memory at [mem 0xd8ff9648-0xd8ff968b] ACPI: Reserving SLIC table memory at [mem 0xd8ff9690-0xd8ff9805] ACPI: Reserving LPIT table memory at [mem 0xd8ff9808-0xd8ff9863] ACPI: Reserving SSDT table memory at [mem 0xd8ff9868-0xd8ff9da0] ACPI: Reserving SSDT table memory at [mem 0xd8ff9da8-0xd8ffa87f] ACPI: Reserving SSDT table memory at [mem 0xd8ffa880-0xd8ffaa46] ACPI: Reserving HPET table memory at [mem 0xd8ffaa48-0xd8ffaa7f] ACPI: Reserving SSDT table memory at [mem 0xd8ffaa80-0xd8ffadec] ACPI: Reserving MCFG table memory at [mem 0xd8ffadf0-0xd8ffae2b] ACPI: Reserving SSDT table memory at [mem 0xd8ffae30-0xd8ffe235] ACPI: Reserving ASF! table memory at [mem 0xd8ffe238-0xd8ffe2dc] Mapped APIC to ffffffffff5fc000 ( fee00000) No NUMA configuration found Faking a node at [mem 0x0000000000000000-0x000000021edfffff] NODE_DATA(0) allocated [mem 0x21edd5280-0x21edfffff] cma: Reserved 200 MiB at 0x0000000100000000 Zone ranges: DMA [mem 0x0000000000001000-0x0000000000ffffff] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] Normal [mem 0x0000000100000000-0x000000021edfffff] Device empty Movable zone start for each node Early memory node ranges node 0: [mem 0x0000000000001000-0x0000000000090fff] node 0: [mem 0x0000000000100000-0x00000000d16effff] node 0: [mem 0x00000000d16f7000-0x00000000d1b24fff] node 0: [mem 0x00000000d1fa6000-0x00000000d7eeafff] node 0: [mem 0x00000000d8000000-0x00000000d875ffff] node 0: [mem 0x00000000d8800000-0x00000000d8fadfff] node 0: [mem 0x00000000d9000000-0x00000000da71bfff] node 0: [mem 0x00000000da800000-0x00000000dbe11fff] node 0: [mem 0x0000000100000000-0x000000021edfffff] Initmem setup node 0 [mem 0x0000000000001000-0x000000021edfffff] On node 0, zone DMA: 1 pages in unavailable ranges On node 0, zone DMA: 111 pages in unavailable ranges On node 0, zone DMA32: 7 pages in unavailable ranges On node 0, zone DMA32: 1153 pages in unavailable ranges On node 0, zone DMA32: 277 pages in unavailable ranges On node 0, zone DMA32: 160 pages in unavailable ranges On node 0, zone DMA32: 82 pages in unavailable ranges On node 0, zone DMA32: 228 pages in unavailable ranges On node 0, zone Normal: 16878 pages in unavailable ranges On node 0, zone Normal: 4608 pages in unavailable ranges KernelAddressSanitizer initialized (generic) Reserving Intel graphics memory at [mem 0xdd200000-0xdf1fffff] ACPI: PM-Timer IO Port: 0x1808 ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 8, APIC INT 02 ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 8, APIC INT 09 Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 8, APIC INT 01 Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 8, APIC INT 03 Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 8, APIC INT 04 Int: type 0, pol 0, trig 0, bus 00, IRQ 05, APIC ID 8, APIC INT 05 Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 8, APIC INT 06 Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 8, APIC INT 07 Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 8, APIC INT 08 Int: type 0, pol 0, trig 0, bus 00, IRQ 0a, APIC ID 8, APIC INT 0a Int: type 0, pol 0, trig 0, bus 00, IRQ 0b, APIC ID 8, APIC INT 0b Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 8, APIC INT 0c Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 8, APIC INT 0d Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 8, APIC INT 0e Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 8, APIC INT 0f ACPI: Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8086a701 base: 0xfed00000 [Firmware Bug]: TSC_DEADLINE disabled due to Errata; please update microcode to version: 0x22 (or later) CPU topo: Max. logical packages: 1 CPU topo: Max. logical dies: 1 CPU topo: Max. dies per package: 1 CPU topo: Max. threads per core: 2 CPU topo: Num. cores per package: 4 CPU topo: Num. threads per package: 8 CPU topo: Allowing 8 present CPUs plus 0 hotplug CPUs mapped IOAPIC to ffffffffff5fb000 (fec00000) PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] PM: hibernation: Registered nosave memory: [mem 0x00091000-0x000fffff] PM: hibernation: Registered nosave memory: [mem 0xd16f0000-0xd16f6fff] PM: hibernation: Registered nosave memory: [mem 0xd1b25000-0xd1fa5fff] PM: hibernation: Registered nosave memory: [mem 0xd7eeb000-0xd7ffffff] PM: hibernation: Registered nosave memory: [mem 0xd8760000-0xd87fffff] PM: hibernation: Registered nosave memory: [mem 0xd8fae000-0xd8ffffff] PM: hibernation: Registered nosave memory: [mem 0xda71c000-0xda7fffff] PM: hibernation: Registered nosave memory: [mem 0xdbe12000-0xffffffff] [mem 0xdf200000-0xf7ffffff] available for PCI devices Booting paravirtualized kernel on bare hardware clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 percpu: Embedded 78 pages/cpu s282624 r8192 d28672 u524288 pcpu-alloc: s282624 r8192 d28672 u524288 alloc=1*2097152 pcpu-alloc: [0] 0 1 2 3 [0] 4 5 6 7 Kernel command line: ip=::::lkp-hsw-d01::dhcp root=/dev/ram0 RESULT_ROOT=/result/nvml/util-non-pmem/lkp-hsw-d01/debian-13-x86_64-20250902.cgz/x86_64-rhel-9.4-func/gcc-14/45f3d9974e382495db777e0290a32ba0cd6f454b/0 BOOT_IMAGE=/pkg/linux/x86_64-rhel-9.4-func/gcc-14/45f3d9974e382495db777e0290a32ba0cd6f454b/vmlinuz-6.18.0-rc5-00215-g45f3d9974e38 branch=linux-devel/devel-hourly-20251118-225732 job=/lkp/jobs/scheduled/lkp-hsw-d01/nvml-util-non-pmem-debian-13-x86_64-20250902.cgz-45f3d9974e38-20251125-90233-f2lmgn-0.yaml user=lkp ARCH=x86_64 kconfig=x86_64-rhel-9.4-func commit=45f3d9974e382495db777e0290a32ba0cd6f454b intremap=posted_msi max_uptime=14400 LKP_SERVER=internal-lkp-server nokaslr selinux=0 debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 net.ifnames=0 printk.devkmsg=on panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 drbd.minor_count=8 systemd.log_level=err ignore_loglevel console=tty0 earlyprintk=ttyS0,115200 console=ttyS0,115200 vga=nor sysrq: sysrq always enabled. ignoring the deprecated load_ramdisk= option Unknown kernel command line parameters "nokaslr RESULT_ROOT=/result/nvml/util-non-pmem/lkp-hsw-d01/debian-13-x86_64-20250902.cgz/x86_64-rhel-9.4-func/gcc-14/45f3d9974e382495db777e0290a32ba0cd6f454b/0 branch=linux-devel/devel-hourly-20251118-225732 job=/lkp/jobs/scheduled/lkp-hsw-d01/nvml-util-non-pmem-debian-13-x86_64-20250902.cgz-45f3d9974e38-20251125-90233-f2lmgn-0.yaml user=lkp ARCH=x86_64 kconfig=x86_64-rhel-9.4-func commit=45f3d9974e382495db777e0290a32ba0cd6f454b max_uptime=14400 LKP_SERVER=internal-lkp-server prompt_ramdisk=0 vga=normal", will be passed to user space. random: crng init done printk: log buffer data + meta data: 1048576 + 3670016 = 4718592 bytes Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) software IO TLB: area num 8. Fallback order for Node 0: 0 Built 1 zonelists, mobility grouping on. Total pages: 2073647 Policy zone: Normal mem auto-init: stack:off, heap alloc:off, heap free:off stackdepot: allocating hash table via alloc_large_system_hash stackdepot hash table entries: 1048576 (order: 12, 16777216 bytes, linear) stackdepot: allocating space for 8192 stack pools via memblock SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 Kernel/User page tables isolation: enabled Poking KASLR using RDRAND RDTSC... ftrace: allocating 56258 entries in 220 pages ftrace: allocated 220 pages with 5 groups Dynamic Preempt: voluntary rcu: Preemptible hierarchical RCU implementation. rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8. RCU CPU stall warnings timeout set to 100 (rcu_cpu_stall_timeout). Trampoline variant of Tasks RCU enabled. Rude variant of Tasks RCU enabled. Tracing variant of Tasks RCU enabled. rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8. RCU Tasks Rude: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8. RCU Tasks Trace: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8. NR_IRQS: 524544, nr_irqs: 488, preallocated irqs: 16 rcu: srcu_init: Setting srcu_struct sizes based on contention. spurious 8259A interrupt: IRQ7. Console: colour VGA+ 80x25 printk: legacy console [tty0] enabled printk: legacy console [ttyS0] enabled printk: legacy console [ttyS0] enabled printk: legacy bootconsole [earlyser0] disabled printk: legacy bootconsole [earlyser0] disabled ACPI: Core revision 20250807 clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns APIC: Switch to symmetric I/O mode setup x2apic: IRQ remapping doesn't support X2APIC mode Masked ExtINT on CPU#0 ESR value before enabling vector: 0x00000040 after: 0x00000000 ENABLING IO-APIC IRQs Init IO_APIC IRQs apic 8 pin 0 not connected IOAPIC[0]: Preconfigured routing entry (8-1 -> IRQ 1 Level:0 ActiveLow:0) IOAPIC[0]: Preconfigured routing entry (8-2 -> IRQ 0 Level:0 ActiveLow:0) IOAPIC[0]: Preconfigured routing entry (8-3 -> IRQ 3 Level:0 ActiveLow:0) IOAPIC[0]: Preconfigured routing entry (8-4 -> IRQ 4 Level:0 ActiveLow:0) IOAPIC[0]: Preconfigured routing entry (8-5 -> IRQ 5 Level:0 ActiveLow:0) IOAPIC[0]: Preconfigured routing entry (8-6 -> IRQ 6 Level:0 ActiveLow:0) IOAPIC[0]: Preconfigured routing entry (8-7 -> IRQ 7 Level:0 ActiveLow:0) IOAPIC[0]: Preconfigured routing entry (8-8 -> IRQ 8 Level:0 ActiveLow:0) IOAPIC[0]: Preconfigured routing entry (8-9 -> IRQ 9 Level:1 ActiveLow:0) IOAPIC[0]: Preconfigured routing entry (8-10 -> IRQ 10 Level:0 ActiveLow:0) IOAPIC[0]: Preconfigured routing entry (8-11 -> IRQ 11 Level:0 ActiveLow:0) IOAPIC[0]: Preconfigured routing entry (8-12 -> IRQ 12 Level:0 ActiveLow:0) IOAPIC[0]: Preconfigured routing entry (8-13 -> IRQ 13 Level:0 ActiveLow:0) IOAPIC[0]: Preconfigured routing entry (8-14 -> IRQ 14 Level:0 ActiveLow:0) IOAPIC[0]: Preconfigured routing entry (8-15 -> IRQ 15 Level:0 ActiveLow:0) apic 8 pin 16 not connected apic 8 pin 17 not connected apic 8 pin 18 not connected apic 8 pin 19 not connected apic 8 pin 20 not connected apic 8 pin 21 not connected apic 8 pin 22 not connected apic 8 pin 23 not connected ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x30e5d5fe234, max_idle_ns: 440795362715 ns Calibrating delay loop (skipped), value calculated using timer frequency.. 6784.56 BogoMIPS (lpj=3392284) CPU0: Thermal monitoring enabled (TM1) Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024 Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4 process: using mwait in idle threads mitigations: Enabled attack vectors: user_kernel, user_user, guest_host, guest_guest, SMT mitigations: auto Speculative Store Bypass: Vulnerable SRBDS: Vulnerable: No microcode Spectre V2 : Mitigation: Retpolines MDS: Vulnerable: Clear CPU buffers attempted, no microcode TAA: Vulnerable: Clear CPU buffers attempted, no microcode VMSCAPE: Vulnerable Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization Spectre V2 : Spectre v2 / SpectreRSB: Filling RSB on context switch and VMEXIT x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. Freeing SMP alternatives memory: 52K pid_max: default: 32768 minimum: 301 LSM: initializing lsm=lockdown,capability,yama,ima,evm Yama: becoming mindful. Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) Using local APIC timer interrupts. Calibrating APIC timer ... ... lapic delta = 623582 ... PM-Timer delta = 357969 ... PM-Timer result ok ..... delta 623582 ..... mult: 26779121 ..... calibration result: 99773 ..... CPU clock speed is 3392.0283 MHz. ..... host bus clock speed is 99.0773 MHz. smpboot: CPU0: Intel(R) Core(TM) i7-4770 CPU @ 3.40GHz (family: 0x6, model: 0x3c, stepping: 0x3) Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver. ... version: 3 ... bit width: 48 ... generic counters: 4 ... generic bitmap: 000000000000000f ... fixed-purpose counters: 3 ... fixed-purpose bitmap: 0000000000000007 ... value mask: 0000ffffffffffff ... max period: 00007fffffffffff ... global_ctrl mask: 000000070000000f signal: max sigframe size: 1360 Estimated ratio of average max frequency by base frequency (times 1024): 1114 rcu: Hierarchical SRCU implementation. rcu: Max phase no-delay instances is 400. Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. smp: Bringing up secondary CPUs ... smpboot: x86: Booting SMP configuration: .... node #0, CPUs: #1 #2 #3 Masked ExtINT on CPU#1 Masked ExtINT on CPU#2 Masked ExtINT on CPU#3 #4 #5 #6 #7 Masked ExtINT on CPU#4 MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. TAA CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/tsx_async_abort.html for more details. Masked ExtINT on CPU#5 Masked ExtINT on CPU#6 Masked ExtINT on CPU#7 smp: Brought up 1 node, 8 CPUs smpboot: Total of 8 processors activated (54276.54 BogoMIPS) node 0 deferred pages initialised in 7ms Memory: 5834780K/8294588K available (49783K kernel code, 17763K rwdata, 14832K rodata, 7568K init, 6568K bss, 2243120K reserved, 204800K cma-reserved) devtmpfs: initialized x86/mm: Memory block size: 128MB ACPI: PM: Registering ACPI NVS region [mem 0xd16f0000-0xd16f6fff] (28672 bytes) ACPI: PM: Registering ACPI NVS region [mem 0xda71c000-0xda7fffff] (933888 bytes) clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns posixtimers hash table entries: 4096 (order: 4, 65536 bytes, linear) futex hash table entries: 2048 (131072 bytes on 1 NUMA nodes, total 128 KiB, linear). pinctrl core: initialized pinctrl subsystem NET: Registered PF_NETLINK/PF_ROUTE protocol family DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations audit: initializing netlink subsys (disabled) audit: type=2000 audit(1764117314.366:1): state=initialized audit_enabled=0 res=1 thermal_sys: Registered thermal governor 'fair_share' thermal_sys: Registered thermal governor 'step_wise' thermal_sys: Registered thermal governor 'user_space' cpuidle: using governor menu acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 PCI: ECAM [mem 0xf8000000-0xfbffffff] (base 0xf8000000) for domain 0000 [bus 00-3f] PCI: ECAM [mem 0xf8000000-0xfbffffff] reserved as E820 entry PCI: Using configuration type 1 for base access core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page ACPI: Added _OSI(Module Device) ACPI: Added _OSI(Processor Device) ACPI: Added _OSI(Processor Aggregator Device) ACPI: 6 ACPI AML tables successfully acquired and loaded ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored ACPI: Dynamic OEM Table Load: ACPI: SSDT 0xFFFF88810D602000 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120711) ACPI: Dynamic OEM Table Load: ACPI: SSDT 0xFFFF88810F516000 0005AA (v01 PmRef ApIst 00003000 INTL 20120711) ACPI: Dynamic OEM Table Load: ACPI: SSDT 0xFFFF88810DE0B800 000119 (v01 PmRef ApCst 00003000 INTL 20120711) ACPI: Interpreter enabled ACPI: PM: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug PCI: Using E820 reservations for host bridge windows ACPI: Enabled 9 GPEs in block 00 to 3F ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR DPC] PCI host bridge to bus 0000:00 pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000e7fff window] pci_bus 0000:00: root bus resource [mem 0xdf200000-0xfeafffff window] pci_bus 0000:00: root bus resource [bus 00-3e] pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000 conventional PCI endpoint pci 0000:00:02.0: [8086:0412] type 00 class 0x030000 conventional PCI endpoint pci 0000:00:02.0: BAR 0 [mem 0xf7800000-0xf7bfffff 64bit] pci 0000:00:02.0: BAR 2 [mem 0xe0000000-0xefffffff 64bit pref] pci 0000:00:02.0: BAR 4 [io 0xf000-0xf03f] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300 PCIe Root Complex Integrated Endpoint pci 0000:00:03.0: BAR 0 [mem 0xf7c34000-0xf7c37fff 64bit] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330 conventional PCI endpoint pci 0000:00:14.0: BAR 0 [mem 0xf7c20000-0xf7c2ffff 64bit] pci 0000:00:14.0: PME# supported from D3hot D3cold pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000 conventional PCI endpoint pci 0000:00:16.0: BAR 0 [mem 0xf7c40000-0xf7c4000f 64bit] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold pci 0000:00:19.0: [8086:153a] type 00 class 0x020000 conventional PCI endpoint pci 0000:00:19.0: BAR 0 [mem 0xf7c00000-0xf7c1ffff] pci 0000:00:19.0: BAR 1 [mem 0xf7c3d000-0xf7c3dfff] pci 0000:00:19.0: BAR 2 [io 0xf080-0xf09f] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320 conventional PCI endpoint pci 0000:00:1a.0: BAR 0 [mem 0xf7c3c000-0xf7c3c3ff] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300 PCIe Root Complex Integrated Endpoint pci 0000:00:1b.0: BAR 0 [mem 0xf7c30000-0xf7c33fff 64bit] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400 PCIe Root Port pci 0000:00:1c.0: PCI bridge to [bus 01] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.1: [8086:8c12] type 01 class 0x060400 PCIe Root Port pci 0000:00:1c.1: PCI bridge to [bus 02-03] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320 conventional PCI endpoint pci 0000:00:1d.0: BAR 0 [mem 0xf7c3b000-0xf7c3b3ff] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold pci 0000:00:1f.0: [8086:8c4e] type 00 class 0x060100 conventional PCI endpoint pci 0000:00:1f.2: [8086:2822] type 00 class 0x010400 conventional PCI endpoint pci 0000:00:1f.2: BAR 0 [io 0xf0d0-0xf0d7] pci 0000:00:1f.2: BAR 1 [io 0xf0c0-0xf0c3] pci 0000:00:1f.2: BAR 2 [io 0xf0b0-0xf0b7] pci 0000:00:1f.2: BAR 3 [io 0xf0a0-0xf0a3] pci 0000:00:1f.2: BAR 4 [io 0xf060-0xf07f] pci 0000:00:1f.2: BAR 5 [mem 0xf7c3a000-0xf7c3a7ff] pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500 conventional PCI endpoint pci 0000:00:1f.3: BAR 0 [mem 0xf7c39000-0xf7c390ff 64bit] pci 0000:00:1f.3: BAR 4 [io 0xf040-0xf05f] acpiphp: Slot [1] registered pci 0000:00:1c.0: PCI bridge to [bus 01] pci 0000:02:00.0: [104c:8240] type 01 class 0x060400 PCIe to PCI/PCI-X bridge pci 0000:02:00.0: PCI bridge to [bus 03] pci 0000:02:00.0: supports D1 D2 pci 0000:00:1c.1: PCI bridge to [bus 02-03] pci_bus 0000:03: extended config space not accessible pci 0000:02:00.0: PCI bridge to [bus 03] ACPI: PCI: Interrupt link LNKA configured for IRQ 11 ACPI: PCI: Interrupt link LNKA disabled ACPI: PCI: Interrupt link LNKB configured for IRQ 11 ACPI: PCI: Interrupt link LNKB disabled ACPI: PCI: Interrupt link LNKC configured for IRQ 5 ACPI: PCI: Interrupt link LNKC disabled ACPI: PCI: Interrupt link LNKD configured for IRQ 10 ACPI: PCI: Interrupt link LNKD disabled ACPI: PCI: Interrupt link LNKE configured for IRQ 5 ACPI: PCI: Interrupt link LNKE disabled ACPI: PCI: Interrupt link LNKF configured for IRQ 0 ACPI: PCI: Interrupt link LNKF disabled ACPI: PCI: Interrupt link LNKG configured for IRQ 3 ACPI: PCI: Interrupt link LNKG disabled ACPI: PCI: Interrupt link LNKH configured for IRQ 10 ACPI: PCI: Interrupt link LNKH disabled iommu: Default domain type: Translated iommu: DMA domain TLB invalidation policy: lazy mode SCSI subsystem initialized ACPI: bus type USB registered usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb pps_core: LinuxPPS API ver. 1 registered pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti PTP clock support registered EDAC MC: Ver: 3.0.0 NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO NetLabel: unlabeled traffic allowed by default PCI: Using ACPI for IRQ routing PCI: pci_cache_line_size set to 64 bytes e820: reserve RAM buffer [mem 0x00091800-0x0009ffff] e820: reserve RAM buffer [mem 0xd16f0000-0xd3ffffff] e820: reserve RAM buffer [mem 0xd1b25000-0xd3ffffff] e820: reserve RAM buffer [mem 0xd7eeb000-0xd7ffffff] e820: reserve RAM buffer [mem 0xd8760000-0xdbffffff] e820: reserve RAM buffer [mem 0xd8fae000-0xdbffffff] e820: reserve RAM buffer [mem 0xda71c000-0xdbffffff] e820: reserve RAM buffer [mem 0xdbe12000-0xdbffffff] e820: reserve RAM buffer [mem 0x21ee00000-0x21fffffff] pci 0000:00:02.0: vgaarb: setting as boot VGA device pci 0000:00:02.0: vgaarb: bridge control possible pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 hpet0: 8 comparators, 64-bit 14.318180 MHz counter clocksource: Switched to clocksource tsc-early VFS: Disk quotas dquot_6.6.0 VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) netfs: FS-Cache loaded pnp: PnP ACPI init system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved system 00:01: [io 0x0680-0x069f] has been reserved system 00:01: [io 0xffff] has been reserved system 00:01: [io 0xffff] has been reserved system 00:01: [io 0xffff] has been reserved system 00:01: [io 0x1c00-0x1cfe] has been reserved system 00:01: [io 0x1d00-0x1dfe] has been reserved system 00:01: [io 0x1e00-0x1efe] has been reserved system 00:01: [io 0x1f00-0x1ffe] has been reserved system 00:01: [io 0x1800-0x18fe] could not be reserved system 00:01: [io 0x164e-0x164f] has been reserved system 00:03: [io 0x0a00-0x0a0f] has been reserved system 00:04: [io 0x04d0-0x04d1] has been reserved pnp 00:05: [dma 0 disabled] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved system 00:06: [mem 0xf8000000-0xfbffffff] has been reserved system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved system 00:06: [mem 0xfed90000-0xfed93fff] has been reserved system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved system 00:06: [mem 0xff000000-0xffffffff] has been reserved system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved system 00:06: [mem 0xf7fdf000-0xf7fdffff] has been reserved system 00:06: [mem 0xf7fe0000-0xf7feffff] has been reserved pnp: PnP ACPI: found 7 devices clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns NET: Registered PF_INET protocol family IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) TCP: Hash tables configured (established 65536 bind 65536) MPTCP token hash table entries: 8192 (order: 6, 196608 bytes, linear) UDP hash table entries: 4096 (order: 6, 262144 bytes, linear) UDP-Lite hash table entries: 4096 (order: 6, 262144 bytes, linear) NET: Registered PF_UNIX/PF_LOCAL protocol family RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp-with-tls transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. NET: Registered PF_XDP protocol family pci 0000:00:1c.0: PCI bridge to [bus 01] pci 0000:02:00.0: PCI bridge to [bus 03] pci 0000:00:1c.1: PCI bridge to [bus 02-03] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] pci_bus 0000:00: resource 7 [mem 0x000dc000-0x000e7fff window] pci_bus 0000:00: resource 8 [mem 0xdf200000-0xfeafffff window] IOAPIC[0]: Preconfigured routing entry (8-16 -> IRQ 16 Level:1 ActiveLow:1) pci 0000:00:14.0: quirk_usb_early_handoff+0x0/0x2d0 took 10523 usecs IOAPIC[0]: Preconfigured routing entry (8-16 -> IRQ 16 Level:1 ActiveLow:1) pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x2d0 took 10405 usecs IOAPIC[0]: Preconfigured routing entry (8-23 -> IRQ 23 Level:1 ActiveLow:1) pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x2d0 took 10452 usecs PCI: CLS 64 bytes, default 64 PCI-DMA: Using software bounce buffering for IO (SWIOTLB) Trying to unpack rootfs image as initramfs... software IO TLB: mapped [mem 0x00000000d3eeb000-0x00000000d7eeb000] (64MB) Initialise system trusted keyrings Key type blacklist registered workingset: timestamp_bits=36 max_order=21 bucket_order=0 9p: Installing v9fs 9p2000 file system support integrity: Platform Keyring initialized integrity: Machine keyring initialized cryptd: max_cpu_qlen set to 1000 NET: Registered PF_ALG protocol family Key type asymmetric registered Asymmetric key parser 'x509' registered Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245) io scheduler mq-deadline registered io scheduler kyber registered io scheduler bfq registered IOAPIC[0]: Preconfigured routing entry (8-16 -> IRQ 16 Level:1 ActiveLow:1) pcieport 0000:00:1c.0: PME: Signaling with IRQ 24 IOAPIC[0]: Preconfigured routing entry (8-17 -> IRQ 17 Level:1 ActiveLow:1) pcieport 0000:00:1c.1: PME: Signaling with IRQ 25 input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 ACPI: button: Power Button [PWRB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 ACPI: button: Power Button [PWRF] Monitor-Mwait will be used to enter C-1 state Monitor-Mwait will be used to enter C-2 state ACPI: \_TZ_.TZ00: _AL0 evaluation failure thermal LNXTHERM:00: registered as thermal_zone0 ACPI: thermal: Thermal Zone [TZ00] (28 C) thermal LNXTHERM:01: registered as thermal_zone1 ACPI: thermal: Thermal Zone [TZ01] (30 C) Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A Non-volatile memory driver v1.3 rdac: device handler registered hp_sw: device handler registered emc: device handler registered alua: device handler registered e1000: Intel(R) PRO/1000 Network Driver e1000: Copyright (c) 1999-2006 Intel Corporation. e1000e: Intel(R) PRO/1000 Network Driver e1000e: Copyright(c) 1999 - 2015 Intel Corporation. IOAPIC[0]: Preconfigured routing entry (8-20 -> IRQ 20 Level:1 ActiveLow:1) e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) f8:b1:56:ce:16:62 e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF igb: Intel(R) Gigabit Ethernet Network Driver igb: Copyright (c) 2007-2014 Intel Corporation. Intel(R) 2.5G Ethernet Linux Driver Copyright(c) 2018 Intel Corporation. i40e: Intel(R) Ethernet Connection XL710 Network Driver i40e: Copyright (c) 2013 - 2019 Intel Corporation. usbcore: registered new interface driver asix ehci-pci 0000:00:1a.0: EHCI Host Controller IOAPIC[0]: Preconfigured routing entry (8-23 -> IRQ 23 Level:1 ActiveLow:1) ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 ehci-pci 0000:00:1a.0: debug port 2 ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7c3c000 ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.18 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 6.18.0-rc5-00215-g45f3d9974e38 ehci_hcd usb usb1: SerialNumber: 0000:00:1a.0 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected xhci_hcd 0000:00:14.0: xHCI Host Controller xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810 ehci-pci 0000:00:1d.0: EHCI Host Controller xhci_hcd 0000:00:14.0: xHCI Host Controller ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 3 xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 ehci-pci 0000:00:1d.0: debug port 2 xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7c3b000 usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.18 ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: xHCI Host Controller usb usb2: Manufacturer: Linux 6.18.0-rc5-00215-g45f3d9974e38 xhci-hcd usb usb2: SerialNumber: 0000:00:14.0 hub 2-0:1.0: USB hub found hub 2-0:1.0: 15 ports detected usb 1-1: new high-speed USB device number 2 using ehci-pci usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.18 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: xHCI Host Controller usb usb4: Manufacturer: Linux 6.18.0-rc5-00215-g45f3d9974e38 xhci-hcd usb usb4: SerialNumber: 0000:00:14.0 hub 4-0:1.0: USB hub found hub 4-0:1.0: 6 ports detected usbcore: registered new interface driver usbserial_generic usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.18 usbserial: USB Serial support registered for generic usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 i8042: PNP: No PS/2 controller found. tsc: Refined TSC clocksource calibration: 3392.150 MHz clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x30e557538e7, max_idle_ns: 440795263472 ns usb usb3: Product: EHCI Host Controller usb usb3: Manufacturer: Linux 6.18.0-rc5-00215-g45f3d9974e38 ehci_hcd usb usb3: SerialNumber: 0000:00:1d.0 clocksource: Switched to clocksource tsc mousedev: PS/2 mouse device common for all mice usb 1-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.04 usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected hub 1-1:1.0: USB hub found hub 1-1:1.0: 6 ports detected rtc_cmos 00:02: RTC can wake from S4 rtc_cmos 00:02: registered as rtc0 rtc_cmos 00:02: setting system clock to 2025-11-26T00:35:19 UTC (1764117319) rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs iTCO_vendor_support: vendor-support=0 intel_pstate: Intel P-state driver initializing hid: raw HID events driver (C) Jiri Kosina usbcore: registered new interface driver usbhid usbhid: USB HID core driver drop_monitor: Initializing network drop monitor service Initializing XFRM netlink socket NET: Registered PF_INET6 protocol family Segment Routing with IPv6 In-situ OAM (IOAM) with IPv6 NET: Registered PF_PACKET protocol family 9pnet: Installing 9P2000 support mpls_gso: MPLS GSO support microcode: Current revision: 0x00000016 IPI shorthand broadcast: enabled ... APIC ID: 00000000 (0) ... APIC VERSION: 01060015 0000000000000000000000000000000000000000000000000000000000000000 0000000000000000000000000000000000000000000000000000000000000000 0000000000000000000000000000000000000000000000000000000008001000 number of MP IRQ sources: 15. number of IO-APIC #8 registers: 24. testing the IO APIC....................... IO APIC #8...... .... register #00: 08000000 ....... : physical APIC id: 08 ....... : Delivery Type: 0 ....... : LTS : 0 .... register #01: 00170020 ....... : max redirection entries: 17 ....... : PRQ implemented: 0 ....... : IO APIC version: 20 usb 3-1: new high-speed USB device number 2 using ehci-pci .... IRQ redirection table: IOAPIC 0: pin00, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin01, disabled, edge , high, V(6A), IRR(0), S(0), logical , D(6584), M(2) pin02, enabled , edge , high, V(30), IRR(0), S(0), physical, D(0000), M(0) pin03, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin04, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin05, disabled, edge , high, V(F6), IRR(0), S(0), physical, D(2C13), M(2) pin06, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin07, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin08, enabled , edge , high, V(20), IRR(0), S(0), physical, D(0000), M(0) pin09, enabled , level, high, V(20), IRR(0), S(0), physical, D(0002), M(0) pin0a, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin0b, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin0c, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin0d, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin0e, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) usb 3-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.04 pin0f, disabled, edge , high, V(DC), IRR(0), S(0), remapped, I(5B66), Z(2) pin10, enabled , level, low , V(20), IRR(0), S(0), physical, D(0003), M(0) usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 pin11, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) hub 3-1:1.0: USB hub found pin12, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) hub 3-1:1.0: 8 ports detected pin13, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin14, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin15, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin16, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin17, enabled , level, low , V(20), IRR(0), S(0), physical, D(0007), M(0) IRQ to pin mappings: IRQ0 -> 0:2 IRQ1 -> 0:1 IRQ3 -> 0:3 IRQ4 -> 0:4 IRQ5 -> 0:5 IRQ6 -> 0:6 IRQ7 -> 0:7 IRQ8 -> 0:8 IRQ9 -> 0:9 IRQ10 -> 0:10 IRQ11 -> 0:11 IRQ12 -> 0:12 IRQ13 -> 0:13 IRQ14 -> 0:14 IRQ15 -> 0:15 IRQ16 -> 0:16 IRQ17 -> 0:17 IRQ20 -> 0:20 IRQ23 -> 0:23 .................................... done. sched_clock: Marking stable (5583001440, 285173897)->(6228936107, -360760770) registered taskstats version 1 Loading compiled-in X.509 certificates Loaded X.509 cert 'Build time autogenerated kernel key: e8f57af51609b87bd722e2492209128d82c29072' Demotion targets for Node 0: null page_owner is disabled Key type .fscrypt registered Key type fscrypt-provisioning registered Key type big_key registered Key type encrypted registered ima: No TPM chip found, activating TPM-bypass! Loading compiled-in module X.509 certificates Loaded X.509 cert 'Build time autogenerated kernel key: e8f57af51609b87bd722e2492209128d82c29072' ima: Allocated hash algorithm: sha256 ima: No architecture policies found evm: Initialising EVM extended attributes: evm: security.selinux evm: security.SMACK64 (disabled) evm: security.SMACK64EXEC (disabled) evm: security.SMACK64TRANSMUTE (disabled) evm: security.SMACK64MMAP (disabled) evm: security.apparmor (disabled) evm: security.ima evm: security.capability evm: HMAC attrs: 0x1 Running certificate verification RSA selftest Loaded X.509 cert 'Certificate verification self-testing key: f58703bb33ce1b73ee02eccdee5b8817518fe3db' Running certificate verification ECDSA selftest Freeing initrd memory: 854252K Loaded X.509 cert 'Certificate verification ECDSA self-testing key: 2900bcea1deb7bc8479a84a23d758efdfdd2b2d3' e1000e 0000:00:19.0 eth0: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None Sending DHCP requests ..., OK IP-Config: Got DHCP answer from 192.168.3.1, my address is 192.168.3.185 IP-Config: Complete: device=eth0, hwaddr=f8:b1:56:ce:16:62, ipaddr=192.168.3.185, mask=255.255.255.0, gw=192.168.3.200 host=lkp-hsw-d01, domain=lkp.intel.com, nis-domain=(none) bootserver=192.168.3.200, rootserver=192.168.3.200, rootpath= nameserver0=192.168.3.200 clk: Disabling unused clocks PM: genpd: Disabling unused power domains Freeing unused decrypted memory: 2036K Freeing unused kernel image (initmem) memory: 7568K Write protecting the kernel read-only data: 67584k Freeing unused kernel image (text/rodata gap) memory: 1416K Freeing unused kernel image (rodata/data gap) memory: 1552K x86/mm: Checked W+X mappings: passed, no W+X pages found. x86/mm: Checking user space page tables x86/mm: Checked W+X mappings: passed, no W+X pages found. Run /init as init process with arguments: /init nokaslr with environment: HOME=/ TERM=linux RESULT_ROOT=/result/nvml/util-non-pmem/lkp-hsw-d01/debian-13-x86_64-20250902.cgz/x86_64-rhel-9.4-func/gcc-14/45f3d9974e382495db777e0290a32ba0cd6f454b/0 branch=linux-devel/devel-hourly-20251118-225732 job=/lkp/jobs/scheduled/lkp-hsw-d01/nvml-util-non-pmem-debian-13-x86_64-20250902.cgz-45f3d9974e38-20251125-90233-f2lmgn-0.yaml user=lkp ARCH=x86_64 kconfig=x86_64-rhel-9.4-func commit=45f3d9974e382495db777e0290a32ba0cd6f454b max_uptime=14400 LKP_SERVER=internal-lkp-server prompt_ramdisk=0 vga=normal iTCO_wdt iTCO_wdt.1.auto: Found a Lynx Point TCO device (Version=2, TCOBASE=0x1860) input: PC Speaker as /devices/platform/pcspkr/input/input2 iTCO_wdt iTCO_wdt.1.auto: initialized. heartbeat=30 sec (nowayout=0) Startin[ 31.202036][ T231] ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182F conflicts with OpRegion 0x0000000000001800-0x000000000000187F (\PMIO) (20250807/utaddress-204) md-update-done.s[ 31.228574][ T231] ACPI Warning: SystemIO range 0x0000000000001C40-0x0000000000001C4F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20250807/utaddress-204) ate is Completed[ 31.255220][ T231] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20250807/utaddress-204) ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20250807/utaddress-204) ACPI: OSL: Resource conflict; ACPI support missing from driver? ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20250807/utaddress-204) ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20250807/utaddress-204) ACPI: OSL: Resource conflict; ACPI support missing from driver? lpc_ich: Resource conflict(s) found affecting gpio_ich dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.4) libata version 3.00 loaded. IOAPIC[0]: Preconfigured routing entry (8-18 -> IRQ 18 Level:1 ActiveLow:1) Error: Driver 'pcspkr' is already registered, aborting... i801_smbus 0000:00:1f.3: SPD Write Disable is set i801_smbus 0000:00:1f.3: SMBus using PCI interrupt i2c i2c-0: Successfully instantiated SPD at 0x53 1;39msys-fs-fuse[ 31.481553][ T236] RAPL PMU: hw unit of domain package 2^-14 Joules -connections.mou[ 31.489311][ T236] RAPL PMU: hw unit of domain dram 2^-14 Joules IOAPIC[0]: Preconfigured routing entry (8-19 -> IRQ 19 Level:1 ActiveLow:1) ahci 0000:00:1f.2: AHCI vers 0001.0300, 32 command slots, 6 Gbps, RAID mode ahci 0000:00:1f.2: 2/6 ports implemented (port mask 0x5) ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst IOAPIC[0]: Preconfigured routing entry (8-22 -> IRQ 22 Level:1 ActiveLow:1) scsi host0: ahci scsi host3: ahci ade and clean ac[ 31.616160][ T241] ata2: DUMMY ata3: SATA max UDMA/133 abar m2048@0xf7c3a000 port 0xf7c3a200 irq 29 lpm-pol 0 ata4: DUMMY ata5: DUMMY ata6: DUMMY ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) ata1.00: Model 'INTEL SSDSC2BB800G4', rev 'D2010370', applying quirks: zeroaftertrim ata3.00: ATA-10: ST4000NM0035-1V4107, TN02, max UDMA/133 ata1.00: ATA-9: INTEL SSDSC2BB800G4, D2010370, max UDMA/133 ata1.00: 1562824368 sectors, multi 1: LBA48 NCQ (depth 32) ata1.00: configured for UDMA/133 Startin[ 31.995804][ T266] ata3.00: 7814037168 sectors, multi 0: LBA48 NCQ (depth 32), AA ootstrap.service[ 32.004614][ T266] ata3.00: Features: DIPM NCQ-sndrcv scsi 2:0:0:0: Direct-Access ATA ST4000NM0035-1V4 TN02 PQ: 0 ANSI: 5 LKP: ttyS0: 290: current_version: 16, target_version: 28 LKP: ttyS0: 290: deploy intel ucode 1;39mlkp-bootstr[ 32.116200][ T290] microcode: You should switch to early loading, if possible. microcode: revision: 0x16 -> 0x28 x86/CPU: CPU features have changed after loading microcode, but might not take effect. x86/CPU: Please consider either early loading through initrd/built-in or a potential BIOS update. LKP: ttyS0: 290: Kernel tests: Boot OK! LKP: ttyS0: 290: HOSTNAME lkp-hsw-d01, MAC , kernel 6.18.0-rc5-00215-g45f3d9974e38 1 dell_smbios: No dell-smbios drivers are loaded i915 0000:00:02.0: [drm] Found haswell (device ID 0412) integrated display version 7.00 stepping N/A i915 0000:00:02.0: vgaarb: deactivate vga console Console: switching to colour dummy device 80x25 scsi 0:0:0:0: Attached scsi generic sg0 type 0 snd_hda_codec_alc269 hdaudioC0D0: autoconfig for ALC3220: line_outs=1 (0x1b/0x0/0x0/0x0/0x0) type:line scsi 2:0:0:0: Attached scsi generic sg1 type 0 snd_hda_codec_alc269 hdaudioC0D0: speaker_outs=1 (0x14/0x0/0x0/0x0/0x0) i915 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=io+mem:owns=io+mem snd_hda_codec_alc269 hdaudioC0D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0) snd_hda_codec_alc269 hdaudioC0D0: mono: mono_out=0x0 snd_hda_codec_alc269 hdaudioC0D0: inputs: snd_hda_codec_alc269 hdaudioC0D0: Rear Mic=0x18 snd_hda_codec_alc269 hdaudioC0D0: Front Mic=0x1a [drm] Initialized i915 1.6.0 for 0000:00:02.0 on minor 0 ata1.00: Enabling discard_zeroes_data sd 2:0:0:0: [sdb] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB) sd 0:0:0:0: [sda] 1562824368 512-byte logical blocks: (800 GB/745 GiB) sd 0:0:0:0: [sda] 4096-byte physical blocks sd 2:0:0:0: [sdb] Write Protect is off sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7 sd 2:0:0:0: [sdb] Preferred minimum I/O size 512 bytes ata1.00: Enabling discard_zeroes_data snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [i915]) i915 0000:00:02.0: [drm] Cannot find any crtc or sizes sda: sda1 sda2 sd 0:0:0:0: [sda] Attached SCSI disk i915 0000:00:02.0: [drm] Cannot find any crtc or sizes i915 0000:00:02.0: [drm] Cannot find any crtc or sizes sdb: sdb1 sdb2 sdb3 sdb4 sdb5 sdb6 sd 2:0:0:0: [sdb] Attached SCSI disk input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input3 input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card1/input8 input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input4 input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card1/input9 input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5 input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card1/input10 input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6 intel_rapl_common: Found RAPL domain core intel_rapl_common: Found RAPL domain uncore intel_rapl_common: Found RAPL domain dram intel_rapl_common: package-0:package:long_term locked by BIOS intel_rapl_common: package-0:package:short_term locked by BIOS raid6: skipped pq benchmark and selected avx2x4 raid6: using avx2x2 recovery algorithm xor: automatically using best checksumming function avx Btrfs loaded, zoned=yes, fsverity=yes is_virt=false BTRFS: device fsid 96268e90-9da7-4f88-9809-547b434e656d devid 1 transid 108 /dev/sda1 (8:1) scanned by mount (1118) BTRFS info (device sda1): first mount of filesystem 96268e90-9da7-4f88-9809-547b434e656d BTRFS info (device sda1): using crc32c (crc32c-lib) checksum algorithm BTRFS warning (device sda1): space cache v1 is being deprecated and will be removed in a future release, please use -o space_cache=v2 BTRFS info (device sda1): enabling ssd optimizations BTRFS info (device sda1): turning on async discard BTRFS info (device sda1): enabling disk space caching LKP: ttyS0: 290: /lkp/lkp/src/bin/run-lkp /lkp/jobs/scheduled/lkp-hsw-d01/nvml-util-non-pmem-debian-13-x86_64-20250902.cgz-45f3d9974e38-20251125-90233-f2lmgn-0.yaml lkp: kernel tainted state: 4 LKP: ttyS0: 1140: current_version: 28, target_version: 28 x86/PAT: bmc-watchdog:1215 map pfn expected mapping type uncached-minus for [mem 0xd8fee000-0xd8feefff], got write-back x86/PAT: bmc-watchdog:1215 map pfn expected mapping type uncached-minus for [mem 0xd8fee000-0xd8feefff], got write-back x86/PAT: bmc-watchdog:1215 map pfn expected mapping type uncached-minus for [mem 0xd8fee000-0xd8feefff], got write-back x86/PAT: bmc-watchdog:1215 map pfn expected mapping type uncached-minus for [mem 0xd8fee000-0xd8feefff], got write-back x86/PAT: bmc-watchdog:1215 map pfn expected mapping type uncached-minus for [mem 0xd8fee000-0xd8feefff], got write-back x86/PAT: bmc-watchdog:1215 map pfn expected mapping type uncached-minus for [mem 0xd8fee000-0xd8feefff], got write-back x86/PAT: bmc-watchdog:1215 map pfn expected mapping type uncached-minus for [mem 0xd8fee000-0xd8feefff], got write-back x86/PAT: bmc-watchdog:1215 map pfn expected mapping type uncached-minus for [mem 0xd8fee000-0xd8feefff], got write-back x86/PAT: bmc-watchdog:1215 map pfn expected mapping type uncached-minus for [mem 0xd8fee000-0xd8feefff], got write-back x86/PAT: bmc-watchdog:1215 map pfn expected mapping type uncached-minus for [mem 0xd8fee000-0xd8feefff], got write-back x86/PAT: bmc-watchdog:1215 map pfn expected mapping type uncached-minus for [mem 0xd8fee000-0xd8feefff], got write-back x86/PAT: bmc-watchdog:1215 map pfn expected mapping type uncached-minus for [mem 0xd8fee000-0xd8feefff], got write-back x86/PAT: bmc-watchdog:1215 map pfn expected mapping type uncached-minus for [mem 0xd8fee000-0xd8feefff], got write-back x86/PAT: bmc-watchdog:1215 map pfn expected mapping type uncached-minus for [mem 0xd8fee000-0xd8feefff], got write-back x86/PAT: bmc-watchdog:1215 map pfn expected mapping type uncached-minus for [mem 0xd8fee000-0xd8feefff], got write-back LKP: stdout: 290: Kernel tests: Boot OK! x86/PAT: bmc-watchdog:1215 map pfn expected mapping type uncached-minus for [mem 0xd8fee000-0xd8feefff], got write-back x86/PAT: bmc-watchdog:1215 map pfn expected mapping type uncached-minus for [mem 0xd8fee000-0xd8feefff], got write-back x86/PAT: bmc-watchdog:1215 map pfn expected mapping type uncached-minus for [mem 0xd8fee000-0xd8feefff], got write-back x86/PAT: bmc-watchdog:1215 map pfn expected mapping type uncached-minus for [mem 0xd8fee000-0xd8feefff], got write-back x86/PAT: bmc-watchdog:1215 map pfn expected mapping type uncached-minus for [mem 0xd8fee000-0xd8feefff], got write-back x86/PAT: bmc-watchdog:1215 map pfn expected mapping type uncached-minus for [mem 0xd8fee000-0xd8feefff], got write-back x86/PAT: bmc-watchdog:1215 map pfn expected mapping type uncached-minus for [mem 0xd8fee000-0xd8feefff], got write-back x86/PAT: bmc-watchdog:1215 map pfn expected mapping type uncached-minus for [mem 0xd8fee000-0xd8feefff], got write-back x86/PAT: bmc-watchdog:1215 map pfn expected mapping type uncached-minus for [mem 0xd8fee000-0xd8feefff], got write-back x86/PAT: bmc-watchdog:1215 map pfn expected mapping type uncached-minus for [mem 0xd8fee000-0xd8feefff], got write-back x86/PAT: bmc-watchdog:1215 map pfn expected mapping type uncached-minus for [mem 0xd8fee000-0xd8feefff], got write-back x86/PAT: bmc-watchdog:1215 map pfn expected mapping type uncached-minus for [mem 0xd8fee000-0xd8feefff], got write-back x86/PAT: bmc-watchdog:1215 map pfn expected mapping type uncached-minus for [mem 0xd8fee000-0xd8feefff], got write-back x86/PAT: bmc-watchdog:1215 map pfn expected mapping type uncached-minus for [mem 0xd8fee000-0xd8feefff], got write-back x86/PAT: bmc-watchdog:1215 map pfn expected mapping type uncached-minus for [mem 0xd8fee000-0xd8feefff], got write-back error: dpkg -i /opt/deb/python3_3.13.5-1_amd64.deb failed. LKP: stdout: 290: HOSTNAME lkp-hsw-d01, MAC , kernel 6.18.0-rc5-00215-g45f3d9974e38 1 install debs round one: dpkg -i --force-confdef --force-depends /opt/deb/libexpat1_2.7.1-2_amd64.deb /opt/deb/libpython3.13-minimal_3.13.5-2_amd64.deb /opt/deb/python3.13-minimal_3.13.5-2_amd64.deb /opt/deb/python3-minimal_3.13.5-1_amd64.deb /opt/deb/libpython3.13-stdlib_3.13.5-2_amd64.deb /opt/deb/python3.13_3.13.5-2_amd64.deb /opt/deb/libpython3-stdlib_3.13.5-1_amd64.deb /opt/deb/python3_3.13.5-1_amd64.deb /opt/deb/python3-ntp_1.2.3+dfsg1-8_amd64.deb /opt/deb/ntpsec-ntpdate_1.2.3+dfsg1-8_amd64.deb /opt/deb/ntpdate_1%3a4.2.8p15+dfsg-2~1.2.2+dfsg1-1+deb12u1_all.deb /opt/deb/perl-modules-5.40_5.40.1-6_all.deb /opt/deb/libgdbm-compat4t64_1.24-2_amd64.deb /opt/deb/libperl5.40_5.40.1-6_amd64.deb /opt/deb/perl_5.40.1-6_amd64.deb /opt/deb/libatomic1_14.2.0-19_amd64.deb /opt/deb/libquadmath0_14.2.0-19_amd64.deb /opt/deb/libgcc-14-dev_14.2.0-19_amd64.deb /opt/deb/gcc-14-x86-64-linux-gnu_14.2.0-19_amd64.deb /opt/deb/gcc-14_14.2.0-19_amd64.deb /opt/deb/gcc-x86-64-linux-gnu_4%3a14.2.0-1_amd64.deb /opt/deb/gcc_4%3a14.2.0-1_amd64.deb /opt/deb/g++-14-x86-64-linux-gnu_14.2.0-19_amd64.deb /opt/deb/g++-14_14.2.0-19_amd64.deb /opt/deb/g++-x86-64-linux-gnu_4%3a14.2.0-1_amd64.deb /opt/deb/g++_4%3a14.2.0-1_amd64.deb /opt/deb/libdpkg-perl_1.22.21_all.deb /opt/deb/patch_2.8-2_amd64.deb /opt/deb/cmake-data_3.31.6-2_all.deb /opt/deb/cmake_3.31.6-2_amd64.deb /opt/deb/libpython3.13_3.13.5-2_amd64.deb /opt/deb/native-architecture_0.2.6_all.deb /opt/deb/liberror-perl_0.17030-1_all.deb /opt/deb/python3-packaging_25.0-1_all.deb /opt/deb/libglib2.0-data_2.84.4-3~deb13u1_all.deb /opt/deb/libx11-data_2%3a1.8.12-1_all.deb /opt/deb/pandoc-data_3.1.11.1-3_all.deb /opt/deb/gawk_1%3a5.2.1-2+b1_amd64.deb Selecting previously unselected package libexpat1:amd64. (Reading database ... 7835 files and directories currently installed.) Preparing to unpack .../libexpat1_2.7.1-2_amd64.deb ... Unpacking libexpat1:amd64 (2.7.1-2) ... Selecting previously unselected package libpython3.13-minimal:amd64. Preparing to unpack .../libpython3.13-minimal_3.13.5-2_amd64.deb ... Unpacking libpython3.13-minimal:amd64 (3.13.5-2) ... Selecting previously unselected package python3.13-minimal. Preparing to unpack .../python3.13-minimal_3.13.5-2_amd64.deb ... Unpacking python3.13-minimal (3.13.5-2) ... Selecting previously unselected package python3-minimal. Preparing to unpack .../python3-minimal_3.13.5-1_amd64.deb ... Unpacking python3-minimal (3.13.5-1) ... Selecting previously unselected package libpython3.13-stdlib:amd64. Preparing to unpack .../libpython3.13-stdlib_3.13.5-2_amd64.deb ... Unpacking libpython3.13-stdlib:amd64 (3.13.5-2) ... Selecting previously unselected package python3.13. Preparing to unpack .../python3.13_3.13.5-2_amd64.deb ... Unpacking python3.13 (3.13.5-2) ... Selecting previously unselected package libpython3-stdlib:amd64. Preparing to unpack .../libpython3-stdlib_3.13.5-1_amd64.deb ... Unpacking libpython3-stdlib:amd64 (3.13.5-1) ... Selecting previously unselected package python3. Preparing to unpack .../deb/python3_3.13.5-1_amd64.deb ... Unpacking python3 (3.13.5-1) ... Selecting previously unselected package python3-ntp. Preparing to unpack .../python3-ntp_1.2.3+dfsg1-8_amd64.deb ... Unpacking python3-ntp (1.2.3+dfsg1-8) ... Selecting previously unselected package ntpsec-ntpdate. Preparing to unpack .../ntpsec-ntpdate_1.2.3+dfsg1-8_amd64.deb ... Unpacking ntpsec-ntpdate (1.2.3+dfsg1-8) ... Selecting previously unselected package ntpdate. Preparing to unpack .../ntpdate_1%3a4.2.8p15+dfsg-2~1.2.2+dfsg1-1+deb12u1_all.deb ... Unpacking ntpdate (1:4.2.8p15+dfsg-2~1.2.2+dfsg1-1+deb12u1) ... Selecting previously unselected package perl-modules-5.40. Preparing to unpack .../perl-modules-5.40_5.40.1-6_all.deb ... Unpacking perl-modules-5.40 (5.40.1-6) ... Selecting previously unselected package libgdbm-compat4t64:amd64. Preparing to unpack .../libgdbm-compat4t64_1.24-2_amd64.deb ... Unpacking libgdbm-compat4t64:amd64 (1.24-2) ... Selecting previously unselected package libperl5.40:amd64. Preparing to unpack .../libperl5.40_5.40.1-6_amd64.deb ... Unpacking libperl5.40:amd64 (5.40.1-6) ... Selecting previously unselected package perl. Preparing to unpack .../deb/perl_5.40.1-6_amd64.deb ... Unpacking perl (5.40.1-6) ... Selecting previously unselected package libatomic1:amd64. Preparing to unpack .../libatomic1_14.2.0-19_amd64.deb ... Unpacking libatomic1:amd64 (14.2.0-19) ... Selecting previously unselected package libquadmath0:amd64. Preparing to unpack .../libquadmath0_14.2.0-19_amd64.deb ... Unpacking libquadmath0:amd64 (14.2.0-19) ... Selecting previously unselected package libgcc-14-dev:amd64. Preparing to unpack .../libgcc-14-dev_14.2.0-19_amd64.deb ... Unpacking libgcc-14-dev:amd64 (14.2.0-19) ... Selecting previously unselected package gcc-14-x86-64-linux-gnu. Preparing to unpack .../gcc-14-x86-64-linux-gnu_14.2.0-19_amd64.deb ... Unpacking gcc-14-x86-64-linux-gnu (14.2.0-19) ... Selecting previously unselected package gcc-14. Preparing to unpack .../deb/gcc-14_14.2.0-19_amd64.deb ... Unpacking gcc-14 (14.2.0-19) ... Selecting previously unselected package gcc-x86-64-linux-gnu. Preparing to unpack .../gcc-x86-64-linux-gnu_4%3a14.2.0-1_amd64.deb ... Unpacking gcc-x86-64-linux-gnu (4:14.2.0-1) ... Selecting previously unselected package gcc. Preparing to unpack .../deb/gcc_4%3a14.2.0-1_amd64.deb ... Unpacking gcc (4:14.2.0-1) ... Selecting previously unselected package g++-14-x86-64-linux-gnu. Preparing to unpack .../g++-14-x86-64-linux-gnu_14.2.0-19_amd64.deb ... Unpacking g++-14-x86-64-linux-gnu (14.2.0-19) ... Selecting previously unselected package g++-14. Preparing to unpack .../deb/g++-14_14.2.0-19_amd64.deb ... Unpacking g++-14 (14.2.0-19) ... Selecting previously unselected package g++-x86-64-linux-gnu. Preparing to unpack .../g++-x86-64-linux-gnu_4%3a14.2.0-1_amd64.deb ... Unpacking g++-x86-64-linux-gnu (4:14.2.0-1) ... Selecting previously unselected package g++. Preparing to unpack .../deb/g++_4%3a14.2.0-1_amd64.deb ... Unpacking g++ (4:14.2.0-1) ... Selecting previously unselected package libdpkg-perl. Preparing to unpack .../libdpkg-perl_1.22.21_all.deb ... Unpacking libdpkg-perl (1.22.21) ... Selecting previously unselected package patch. Preparing to unpack /opt/deb/patch_2.8-2_amd64.deb ... Unpacking patch (2.8-2) ... Selecting previously unselected package cmake-data. Preparing to unpack .../cmake-data_3.31.6-2_all.deb ... Unpacking cmake-data (3.31.6-2) ... Selecting previously unselected package cmake. Preparing to unpack .../deb/cmake_3.31.6-2_amd64.deb ... Unpacking cmake (3.31.6-2) ... Selecting previously unselected package libpython3.13:amd64. Preparing to unpack .../libpython3.13_3.13.5-2_amd64.deb ... Unpacking libpython3.13:amd64 (3.13.5-2) ... Selecting previously unselected package native-architecture. Preparing to unpack .../native-architecture_0.2.6_all.deb ... Unpacking native-architecture (0.2.6) ... Selecting previously unselected package liberror-perl. Preparing to unpack .../liberror-perl_0.17030-1_all.deb ... Unpacking liberror-perl (0.17030-1) ... Selecting previously unselected package python3-packaging. Preparing to unpack .../python3-packaging_25.0-1_all.deb ... Unpacking python3-packaging (25.0-1) ... Selecting previously unselected package libglib2.0-data. Preparing to unpack .../libglib2.0-data_2.84.4-3~deb13u1_all.deb ... Unpacking libglib2.0-data (2.84.4-3~deb13u1) ... Selecting previously unselected package libx11-data. Preparing to unpack .../libx11-data_2%3a1.8.12-1_all.deb ... Unpacking libx11-data (2:1.8.12-1) ... Selecting previously unselected package pandoc-data. Preparing to unpack .../pandoc-data_3.1.11.1-3_all.deb ... Unpacking pandoc-data (3.1.11.1-3) ... Selecting previously unselected package gawk. Preparing to unpack .../gawk_1%3a5.2.1-2+b1_amd64.deb ... Unpacking gawk (1:5.2.1-2+b1) ... Setting up libexpat1:amd64 (2.7.1-2) ... Setting up libpython3.13-minimal:amd64 (3.13.5-2) ... Setting up python3.13-minimal (3.13.5-2) ... Setting up python3-minimal (3.13.5-1) ... Setting up perl-modules-5.40 (5.40.1-6) ... Setting up libatomic1:amd64 (14.2.0-19) ... Setting up libquadmath0:amd64 (14.2.0-19) ... Setting up patch (2.8-2) ... Setting up cmake-data (3.31.6-2) ... Setting up native-architecture (0.2.6) ... Setting up libglib2.0-data (2.84.4-3~deb13u1) ... Setting up libx11-data (2:1.8.12-1) ... Setting up pandoc-data (3.1.11.1-3) ... Setting up python3-ntp (1.2.3+dfsg1-8) ... Setting up ntpsec-ntpdate (1.2.3+dfsg1-8) ... Setting up ntpdate (1:4.2.8p15+dfsg-2~1.2.2+dfsg1-1+deb12u1) ... Setting up libgdbm-compat4t64:amd64 (1.24-2) ... Setting up libperl5.40:amd64 (5.40.1-6) ... Setting up perl (5.40.1-6) ... Setting up libgcc-14-dev:amd64 (14.2.0-19) ... Setting up gcc-14-x86-64-linux-gnu (14.2.0-19) ... Setting up gcc-14 (14.2.0-19) ... Setting up gcc-x86-64-linux-gnu (4:14.2.0-1) ... Setting up gcc (4:14.2.0-1) ... Setting up g++-14-x86-64-linux-gnu (14.2.0-19) ... Setting up g++-14 (14.2.0-19) ... Setting up g++-x86-64-linux-gnu (4:14.2.0-1) ... Setting up g++ (4:14.2.0-1) ... update-alternatives: using /usr/bin/g++ to provide /usr/bin/c++ (c++) in auto mode Setting up libdpkg-perl (1.22.21) ... Setting up cmake (3.31.6-2) ... Setting up libpython3.13:amd64 (3.13.5-2) ... Setting up liberror-perl (0.17030-1) ... Setting up python3-packaging (25.0-1) ... Setting up gawk (1:5.2.1-2+b1) ... Setting up libpython3.13-stdlib:amd64 (3.13.5-2) ... Setting up python3.13 (3.13.5-2) ... Setting up libpython3-stdlib:amd64 (3.13.5-1) ... Setting up python3 (3.13.5-1) ... running python rtupdate hooks for python3.13... Processing triggers for libc-bin (2.41-12) ... Processing triggers for systemd (257.8-1~deb13u2) ... dpkg: regarding .../python3-minimal_3.13.5-1_amd64.deb containing python3-minimal, pre-dependency problem: python3-minimal pre-depends on python3.13-minimal (>= 3.13.5-1~) python3.13-minimal is unpacked, but has never been configured. dpkg: warning: ignoring pre-dependency problem! dpkg: regarding .../deb/python3_3.13.5-1_amd64.deb containing python3, pre-dependency problem: python3 pre-depends on python3-minimal (= 3.13.5-1) python3-minimal is unpacked, but has never been configured. dpkg: warning: ignoring pre-dependency problem! dpkg: regarding .../gawk_1%3a5.2.1-2+b1_amd64.deb containing gawk, pre-dependency problem: gawk pre-depends on libmpfr6 (>= 3.1.3) libmpfr6 is not installed. dpkg: warning: ignoring pre-dependency problem! dpkg: regarding .../gawk_1%3a5.2.1-2+b1_amd64.deb containing gawk, pre-dependency problem: gawk pre-depends on libsigsegv2 (>= 2.9) libsigsegv2 is not installed. dpkg: warning: ignoring pre-dependency problem! dpkg: python3-ntp: dependency problems, but configuring anyway as you requested: python3-ntp depends on python3. python3-ntp depends on python3:any. dpkg: ntpsec-ntpdate: dependency problems, but configuring anyway as you requested: ntpsec-ntpdate depends on netbase; however: Package netbase is not installed. ntpsec-ntpdate depends on ntpsec-ntpdig (= 1.2.3+dfsg1-8); however: Package ntpsec-ntpdig is not installed. dpkg: libgdbm-compat4t64:amd64: dependency problems, but configuring anyway as you requested: libgdbm-compat4t64:amd64 depends on libgdbm6t64 (>= 1.16); however: Package libgdbm6t64 is not installed. dpkg: libperl5.40:amd64: dependency problems, but configuring anyway as you requested: libperl5.40:amd64 depends on libgdbm6t64 (>= 1.21); however: Package libgdbm6t64 is not installed. dpkg: libgcc-14-dev:amd64: dependency problems, but configuring anyway as you requested: libgcc-14-dev:amd64 depends on libgomp1 (>= 14.2.0-19); however: Package libgomp1 is not installed. libgcc-14-dev:amd64 depends on libitm1 (>= 14.2.0-19); however: Package libitm1 is not installed. libgcc-14-dev:amd64 depends on libasan8 (>= 14.2.0-19); however: Package libasan8 is not installed. libgcc-14-dev:amd64 depends on liblsan0 (>= 14.2.0-19); however: Package liblsan0 is not installed. libgcc-14-dev:amd64 depends on libtsan2 (>= 14.2.0-19); however: Package libtsan2 is not installed. libgcc-14-dev:amd64 depends on libubsan1 (>= 14.2.0-19); however: Package libubsan1 is not installed. libgcc-14-dev:amd64 depends on libhwasan0 (>= 14.2.0-19); however: Package libhwasan0 is not installed. dpkg: gcc-14-x86-64-linux-gnu: dependency problems, but configuring anyway as you requested: gcc-14-x86-64-linux-gnu depends on cpp-14-x86-64-linux-gnu (= 14.2.0-19); however: Package cpp-14-x86-64-linux-gnu is not installed. gcc-14-x86-64-linux-gnu depends on libcc1-0 (>= 14.2.0-19); however: Package libcc1-0 is not installed. gcc-14-x86-64-linux-gnu depends on binutils-x86-64-linux-gnu (>= 2.39); however: Package binutils-x86-64-linux-gnu is not installed. gcc-14-x86-64-linux-gnu depends on libisl23 (>= 0.15); however: Package libisl23 is not installed. gcc-14-x86-64-linux-gnu depends on libmpc3 (>= 1.1.0); however: Package libmpc3 is not installed. gcc-14-x86-64-linux-gnu depends on libmpfr6 (>= 3.1.3); however: Package libmpfr6 is not installed. dpkg: gcc-14: dependency problems, but configuring anyway as you requested: gcc-14 depends on cpp-14 (= 14.2.0-19); however: Package cpp-14 is not installed. gcc-14 depends on binutils (>= 2.39); however: Package binutils is not installed. dpkg: gcc-x86-64-linux-gnu: dependency problems, but configuring anyway as you requested: gcc-x86-64-linux-gnu depends on cpp-x86-64-linux-gnu (= 4:14.2.0-1); however: Package cpp-x86-64-linux-gnu is not installed. dpkg: gcc: dependency problems, but configuring anyway as you requested: gcc depends on cpp (= 4:14.2.0-1); however: Package cpp is not installed. gcc depends on cpp-x86-64-linux-gnu (= 4:14.2.0-1); however: Package cpp-x86-64-linux-gnu is not installed. dpkg: g++-14-x86-64-linux-gnu: dependency problems, but configuring anyway as you requested: g++-14-x86-64-linux-gnu depends on libstdc++-14-dev (= 14.2.0-19); however: Package libstdc++-14-dev is not installed. g++-14-x86-64-linux-gnu depends on libisl23 (>= 0.15); however: Package libisl23 is not installed. g++-14-x86-64-linux-gnu depends on libmpc3 (>= 1.1.0); however: Package libmpc3 is not installed. g++-14-x86-64-linux-gnu depends on libmpfr6 (>= 3.1.3); however: Package libmpfr6 is not installed. dpkg: g++-x86-64-linux-gnu: dependency problems, but configuring anyway as you requested: g++-x86-64-linux-gnu depends on cpp-x86-64-linux-gnu (= 4:14.2.0-1); however: Package cpp-x86-64-linux-gnu is not installed. dpkg: g++: dependency problems, but configuring anyway as you requested: g++ depends on cpp (= 4:14.2.0-1); however: Package cpp is not installed. g++ depends on cpp-x86-64-linux-gnu (= 4:14.2.0-1); however: Package cpp-x86-64-linux-gnu is not installed. dpkg: cmake: dependency problems, but configuring anyway as you requested: cmake depends on libarchive13t64 (>= 3.3.3); however: Package libarchive13t64 is not installed. cmake depends on libjsoncpp26 (>= 1.9.6); however: Package libjsoncpp26 is not installed. cmake depends on librhash1 (>= 1.2.6); however: Package librhash1 is not installed. cmake depends on libuv1t64 (>= 1.38.0); however: Package libuv1t64 is not installed. dpkg: libpython3.13:amd64: dependency problems, but configuring anyway as you requested: libpython3.13:amd64 depends on libpython3.13-stdlib (= 3.13.5-2). dpkg: python3-packaging: dependency problems, but configuring anyway as you requested: python3-packaging depends on python3:any. dpkg: gawk: dependency problems, but configuring anyway as you requested: gawk depends on libmpfr6 (>= 3.1.3); however: Package libmpfr6 is not installed. gawk depends on libsigsegv2 (>= 2.9); however: Package libsigsegv2 is not installed. dpkg: libpython3.13-stdlib:amd64: dependency problems, but configuring anyway as you requested: libpython3.13-stdlib:amd64 depends on media-types | mime-support; however: Package media-types is not installed. Package mime-support is not installed. libpython3.13-stdlib:amd64 depends on netbase; however: Package netbase is not installed. dpkg: python3.13: dependency problems, but configuring anyway as you requested: python3.13 depends on media-types | mime-support; however: Package media-types is not installed. Package mime-support is not installed. Traceback (most recent call last): File "/usr/bin/py3clean", line 209, in main() ~~~~^^ File "/usr/bin/py3clean", line 195, in main pfiles = set(dpf.from_package(options.package)) File "/usr/share/python3/debpython/files.py", line 55, in from_package raise Exception("cannot get content of %s" % package_name) Exception: cannot get content of libgio-2.0-dev-bin error running python rtupdate hook libgio-2.0-dev-bin dpkg: error processing package python3 (--install): installed python3 package post-installation script subprocess returned error exit status 4 Errors were encountered while processing: python3 handle /opt/deb/keep-deb.lkp... install debs round two: dpkg -i --force-confdef --force-depends /opt/deb/gawk_1%3a5.2.1-2+b1_amd64.deb (Reading database ... 16083 files and directories currently installed.) Preparing to unpack .../gawk_1%3a5.2.1-2+b1_amd64.deb ... Unpacking gawk (1:5.2.1-2+b1) over (1:5.2.1-2+b1) ... Setting up gawk (1:5.2.1-2+b1) ... handle /opt/deb/keep-deb.hw... install debs round two: dpkg -i --force-confdef --force-depends /opt/deb/libexpat1_2.7.1-2_amd64.deb (Reading database ... 16083 files and directories currently installed.) Preparing to unpack .../libexpat1_2.7.1-2_amd64.deb ... Unpacking libexpat1:amd64 (2.7.1-2) over (2.7.1-2) ... Setting up libexpat1:amd64 (2.7.1-2) ... Processing triggers for libc-bin (2.41-12) ... install debs round two: dpkg -i --force-confdef --force-depends /opt/deb/libpython3.13-minimal_3.13.5-2_amd64.deb (Reading database ... 16083 files and directories currently installed.) Preparing to unpack .../libpython3.13-minimal_3.13.5-2_amd64.deb ... Unpacking libpython3.13-minimal:amd64 (3.13.5-2) over (3.13.5-2) ... Setting up libpython3.13-minimal:amd64 (3.13.5-2) ... install debs round two: dpkg -i --force-confdef --force-depends /opt/deb/python3.13-minimal_3.13.5-2_amd64.deb (Reading database ... 16083 files and directories currently installed.) Preparing to unpack .../python3.13-minimal_3.13.5-2_amd64.deb ... Unpacking python3.13-minimal (3.13.5-2) over (3.13.5-2) ... Setting up python3.13-minimal (3.13.5-2) ... Processing triggers for systemd (257.8-1~deb13u2) ... install debs round two: dpkg -i --force-confdef --force-depends /opt/deb/python3-minimal_3.13.5-1_amd64.deb (Reading database ... 16083 files and directories currently installed.) Preparing to unpack .../python3-minimal_3.13.5-1_amd64.deb ... Unpacking python3-minimal (3.13.5-1) over (3.13.5-1) ... Setting up python3-minimal (3.13.5-1) ... install debs round two: dpkg -i --force-confdef --force-depends /opt/deb/libpython3.13-stdlib_3.13.5-2_amd64.deb (Reading database ... 16083 files and directories currently installed.) Preparing to unpack .../libpython3.13-stdlib_3.13.5-2_amd64.deb ... Unpacking libpython3.13-stdlib:amd64 (3.13.5-2) over (3.13.5-2) ... Setting up libpython3.13-stdlib:amd64 (3.13.5-2) ... install debs round two: dpkg -i --force-confdef --force-depends /opt/deb/python3.13_3.13.5-2_amd64.deb (Reading database ... 16083 files and directories currently installed.) Preparing to unpack .../python3.13_3.13.5-2_amd64.deb ... Unpacking python3.13 (3.13.5-2) over (3.13.5-2) ... Setting up python3.13 (3.13.5-2) ... install debs round two: dpkg -i --force-confdef --force-depends /opt/deb/libpython3-stdlib_3.13.5-1_amd64.deb (Reading database ... 16083 files and directories currently installed.) Preparing to unpack .../libpython3-stdlib_3.13.5-1_amd64.deb ... Unpacking libpython3-stdlib:amd64 (3.13.5-1) over (3.13.5-1) ... Setting up libpython3-stdlib:amd64 (3.13.5-1) ... install debs round two: dpkg -i --force-confdef --force-depends /opt/deb/python3_3.13.5-1_amd64.deb (Reading database ... 16083 files and directories currently installed.) Preparing to unpack .../deb/python3_3.13.5-1_amd64.deb ... running python pre-rtupdate hooks for python3.13... Unpacking python3 (3.13.5-1) over (3.13.5-1) ... Setting up python3 (3.13.5-1) ... running python rtupdate hooks for python3.13... Traceback (most recent call last): File "/usr/bin/py3clean", line 209, in main() ~~~~^^ File "/usr/bin/py3clean", line 195, in main pfiles = set(dpf.from_package(options.package)) File "/usr/share/python3/debpython/files.py", line 55, in from_package raise Exception("cannot get content of %s" % package_name) Exception: cannot get content of libgio-2.0-dev-bin error running python rtupdate hook libgio-2.0-dev-bin dpkg: error processing package python3 (--install): installed python3 package post-installation script subprocess returned error exit status 4 Errors were encountered while processing: python3 NO_NETWORK= CLOCK: time stepped by -78885.348956 2025-11-25 02:41:12.084835 (+0000) -78885.348956 +/- 0.000314 internal-lkp-server 192.168.1.200 s5 no-leap INFO: lkp CACHE_DIR is /opt/rootfs/tmp LKP: stdout: 290: /lkp/lkp/src/bin/run-lkp /lkp/jobs/scheduled/lkp-hsw-d01/nvml-util-non-pmem-debian-13-x86_64-20250902.cgz-45f3d9974e38-20251125-90233-f2lmgn-0.yaml RESULT_ROOT=/result/nvml/util-non-pmem/lkp-hsw-d01/debian-13-x86_64-20250902.cgz/x86_64-rhel-9.4-func/gcc-14/45f3d9974e382495db777e0290a32ba0cd6f454b/0 job=/lkp/jobs/scheduled/lkp-hsw-d01/nvml-util-non-pmem-debian-13-x86_64-20250902.cgz-45f3d9974e38-20251125-90233-f2lmgn-0.yaml 2025-11-25 02:41:13 URL:http://internal-lkp-server/~lkp/cgi-bin/lkp-jobfile-append-var?job_file=/lkp/jobs/scheduled/lkp-hsw-d01/nvml-util-non-pmem-debian-13-x86_64-20250902.cgz-45f3d9974e38-20251125-90233-f2lmgn-0.yaml&job_state=running [0/0] -> "/dev/null" [1] ar: creating ../nondebug/core/../libpmemcore.a ar: creating ../debug/core/../libpmemcore.a ar: creating ../nondebug/common/../libpmemcommon.a ar: creating ../nondebug/libpmem/../libpmem.a ar: creating ../nondebug/libpmem2/../libpmem2.a ar: creating ../debug/common/../libpmemcommon.a result_service: raw_upload, RESULT_MNT: /internal-lkp-server/result, RESULT_ROOT: /internal-lkp-server/result/nvml/util-non-pmem/lkp-hsw-d01/debian-13-x86_64-20250902.cgz/x86_64-rhel-9.4-func/gcc-14/45f3d9974e382495db777e0290a32ba0cd6f454b/0, TMP_RESULT_ROOT: /tmp/lkp/result run-job /lkp/jobs/scheduled/lkp-hsw-d01/nvml-util-non-pmem-debian-13-x86_64-20250902.cgz-45f3d9974e38-20251125-90233-f2lmgn-0.yaml ar: creating ../debug/libpmem/../libpmem.a /usr/bin/wget -nv --timeout=3600 --tries=1 --local-encoding=UTF-8 http://internal-lkp-server:80/~lkp/cgi-bin/lkp-jobfile-append-var?job_file=/lkp/jobs/scheduled/lkp-hsw-d01/nvml-util-non-pmem-debian-13-x86_64-20250902.cgz-45f3d9974e38-20251125-90233-f2lmgn-0.yaml&job_state=running -O /dev/null target ucode: 0x28 LKP: stdout: 1140: current_version: 28, target_version: 28 check_nr_cpu CPU(s): 8 On-line CPU(s) list: 0-7 Model name: Intel(R) Core(TM) i7-4770 CPU @ 3.40GHz Thread(s) per core: 2 Core(s) per socket: 4 Socket(s): 1 CPU(s) scaling MHz: 96% NUMA node(s): 1 NUMA node0 CPU(s): 0-7 2025-11-25 02:41:14 cd /lkp/benchmarks/nvml 2025-11-25 02:41:14 cd /lkp/benchmarks/nvml/src/test 2025-11-25 02:41:14 export CC=clang 2025-11-25 02:41:14 export CXX=clang++ 2025-11-25 02:41:14 cd /lkp/benchmarks/nvml 2025-11-25 02:41:14 export CC=clang 2025-11-25 02:41:14 export CXX=clang++ 2025-11-25 02:41:14 cp src/test/testconfig.py.example src/test/testconfig.py 2025-11-25 02:41:14 export OS_DIMM=ndctl 2025-11-25 02:41:14 make -j8 EXTRA_CFLAGS=-DPAGE_SIZE=4096 -DUSE_VALGRIND -Wno-error USE_LLVM_LIBCPP=1 LIBCPP_INCDIR=/usr/local/libcxx/include/c++/v1/ LIBCPP_LIBDIR=/usr/local/libcxx/lib test -f .skip-doc || make -C doc all make[1]: Entering directory '/lkp/benchmarks/nvml/doc' ../utils/md2man.sh libpmem/libpmem.7.md default.man libpmem/libpmem.7 ../utils/md2man.sh libpmemobj/libpmemobj.7.md default.man libpmemobj/libpmemobj.7 ../utils/md2man.sh libpmempool/libpmempool.7.md default.man libpmempool/libpmempool.7 ../utils/md2man.sh libpmem2/libpmem2.7.md default.man libpmem2/libpmem2.7 ../utils/md2man.sh libpmem2/libpmem2_unsafe_shutdown.7.md default.man libpmem2/libpmem2_unsafe_shutdown.7 ../utils/md2man.sh poolset/poolset.5.md default.man poolset/poolset.5 ../utils/md2man.sh pmem_ctl/pmem_ctl.5.md default.man pmem_ctl/pmem_ctl.5 ../utils/md2man.sh libpmem/pmem_flush.3.md default.man libpmem/pmem_flush.3 ../utils/md2man.sh libpmem/pmem_is_pmem.3.md default.man libpmem/pmem_is_pmem.3 ../utils/md2man.sh libpmem/pmem_memmove_persist.3.md default.man libpmem/pmem_memmove_persist.3 ../utils/md2man.sh libpmem/pmem_log_get_threshold.3.md default.man libpmem/pmem_log_get_threshold.3 ../utils/md2man.sh libpmem/pmem_log_set_function.3.md default.man libpmem/pmem_log_set_function.3 ../utils/md2man.sh libpmem/pmem_log_set_threshold.3.md default.man libpmem/pmem_log_set_threshold.3 ../utils/md2man.sh libpmemobj/oid_is_null.3.md default.man libpmemobj/oid_is_null.3 ../utils/md2man.sh libpmemobj/pmemobj_action.3.md default.man libpmemobj/pmemobj_action.3 ../utils/md2man.sh libpmemobj/pmemobj_alloc.3.md default.man libpmemobj/pmemobj_alloc.3 ../utils/md2man.sh libpmemobj/pmemobj_ctl_get.3.md default.man libpmemobj/pmemobj_ctl_get.3 ../utils/md2man.sh libpmemobj/pmemobj_first.3.md default.man libpmemobj/pmemobj_first.3 ../utils/md2man.sh libpmemobj/pmemobj_list_insert.3.md default.man libpmemobj/pmemobj_list_insert.3 ../utils/md2man.sh libpmemobj/pmemobj_memcpy_persist.3.md default.man libpmemobj/pmemobj_memcpy_persist.3 ../utils/md2man.sh libpmemobj/pmemobj_mutex_zero.3.md default.man libpmemobj/pmemobj_mutex_zero.3 ../utils/md2man.sh libpmemobj/pmemobj_open.3.md default.man libpmemobj/pmemobj_open.3 ../utils/md2man.sh libpmemobj/pmemobj_root.3.md default.man libpmemobj/pmemobj_root.3 ../utils/md2man.sh libpmemobj/pmemobj_tx_begin.3.md default.man libpmemobj/pmemobj_tx_begin.3 ../utils/md2man.sh libpmemobj/pmemobj_tx_add_range.3.md default.man libpmemobj/pmemobj_tx_add_range.3 ../utils/md2man.sh libpmemobj/pmemobj_tx_alloc.3.md default.man libpmemobj/pmemobj_tx_alloc.3 ../utils/md2man.sh libpmemobj/pobj_layout_begin.3.md default.man libpmemobj/pobj_layout_begin.3 ../utils/md2man.sh libpmemobj/pobj_list_head.3.md default.man libpmemobj/pobj_list_head.3 ../utils/md2man.sh libpmemobj/toid_declare.3.md default.man libpmemobj/toid_declare.3 ../utils/md2man.sh libpmemobj/pmemobj_log_get_threshold.3.md default.man libpmemobj/pmemobj_log_get_threshold.3 ../utils/md2man.sh libpmemobj/pmemobj_log_set_function.3.md default.man libpmemobj/pmemobj_log_set_function.3 ../utils/md2man.sh libpmemobj/pmemobj_log_set_threshold.3.md default.man libpmemobj/pmemobj_log_set_threshold.3 ../utils/md2man.sh libpmempool/pmempool_check_init.3.md default.man libpmempool/pmempool_check_init.3 ../utils/md2man.sh libpmempool/pmempool_feature_query.3.md default.man libpmempool/pmempool_feature_query.3 ../utils/md2man.sh libpmempool/pmempool_rm.3.md default.man libpmempool/pmempool_rm.3 ../utils/md2man.sh libpmempool/pmempool_sync.3.md default.man libpmempool/pmempool_sync.3 ../utils/md2man.sh libpmem2/pmem2_errormsg.3.md default.man libpmem2/pmem2_errormsg.3 ../utils/md2man.sh libpmem2/pmem2_config_new.3.md default.man libpmem2/pmem2_config_new.3 ../utils/md2man.sh libpmem2/pmem2_map_new.3.md default.man libpmem2/pmem2_map_new.3 ../utils/md2man.sh libpmem2/pmem2_map_delete.3.md default.man libpmem2/pmem2_map_delete.3 ../utils/md2man.sh libpmem2/pmem2_map_get_address.3.md default.man libpmem2/pmem2_map_get_address.3 ../utils/md2man.sh libpmem2/pmem2_map_get_size.3.md default.man libpmem2/pmem2_map_get_size.3 ../utils/md2man.sh libpmem2/pmem2_source_from_fd.3.md default.man libpmem2/pmem2_source_from_fd.3 ../utils/md2man.sh libpmem2/pmem2_config_set_required_store_granularity.3.md default.man libpmem2/pmem2_config_set_required_store_granularity.3 ../utils/md2man.sh libpmem2/pmem2_source_size.3.md default.man libpmem2/pmem2_source_size.3 ../utils/md2man.sh libpmem2/pmem2_source_alignment.3.md default.man libpmem2/pmem2_source_alignment.3 ../utils/md2man.sh libpmem2/pmem2_source_numa_node.3.md default.man libpmem2/pmem2_source_numa_node.3 ../utils/md2man.sh libpmem2/pmem2_config_set_length.3.md default.man libpmem2/pmem2_config_set_length.3 ../utils/md2man.sh libpmem2/pmem2_config_set_offset.3.md default.man libpmem2/pmem2_config_set_offset.3 ../utils/md2man.sh libpmem2/pmem2_map_get_store_granularity.3.md default.man libpmem2/pmem2_map_get_store_granularity.3 ../utils/md2man.sh libpmem2/pmem2_get_flush_fn.3.md default.man libpmem2/pmem2_get_flush_fn.3 ../utils/md2man.sh libpmem2/pmem2_get_drain_fn.3.md default.man libpmem2/pmem2_get_drain_fn.3 ../utils/md2man.sh libpmem2/pmem2_get_persist_fn.3.md default.man libpmem2/pmem2_get_persist_fn.3 ../utils/md2man.sh libpmem2/pmem2_perror.3.md default.man libpmem2/pmem2_perror.3 ../utils/md2man.sh libpmem2/pmem2_get_memmove_fn.3.md default.man libpmem2/pmem2_get_memmove_fn.3 ../utils/md2man.sh libpmem2/pmem2_config_set_sharing.3.md default.man libpmem2/pmem2_config_set_sharing.3 ../utils/md2man.sh libpmem2/pmem2_config_set_vm_reservation.3.md default.man libpmem2/pmem2_config_set_vm_reservation.3 ../utils/md2man.sh libpmem2/pmem2_vm_reservation_new.3.md default.man libpmem2/pmem2_vm_reservation_new.3 ../utils/md2man.sh libpmem2/pmem2_vm_reservation_get_address.3.md default.man libpmem2/pmem2_vm_reservation_get_address.3 ../utils/md2man.sh libpmem2/pmem2_vm_reservation_get_size.3.md default.man libpmem2/pmem2_vm_reservation_get_size.3 ../utils/md2man.sh libpmem2/pmem2_badblock_context_new.3.md default.man libpmem2/pmem2_badblock_context_new.3 ../utils/md2man.sh libpmem2/pmem2_badblock_next.3.md default.man libpmem2/pmem2_badblock_next.3 ../utils/md2man.sh libpmem2/pmem2_badblock_clear.3.md default.man libpmem2/pmem2_badblock_clear.3 ../utils/md2man.sh libpmem2/pmem2_config_set_protection.3.md default.man libpmem2/pmem2_config_set_protection.3 ../utils/md2man.sh libpmem2/pmem2_deep_flush.3.md default.man libpmem2/pmem2_deep_flush.3 ../utils/md2man.sh libpmem2/pmem2_source_from_anon.3.md default.man libpmem2/pmem2_source_from_anon.3 ../utils/md2man.sh libpmem2/pmem2_source_device_id.3.md default.man libpmem2/pmem2_source_device_id.3 ../utils/md2man.sh libpmem2/pmem2_source_device_usc.3.md default.man libpmem2/pmem2_source_device_usc.3 ../utils/md2man.sh libpmem2/pmem2_map_from_existing.3.md default.man libpmem2/pmem2_map_from_existing.3 ../utils/md2man.sh libpmem2/pmem2_source_get_fd.3.md default.man libpmem2/pmem2_source_get_fd.3 ../utils/md2man.sh libpmem2/pmem2_vm_reservation_extend.3.md default.man libpmem2/pmem2_vm_reservation_extend.3 ../utils/md2man.sh libpmem2/pmem2_vm_reservation_map_find.3.md default.man libpmem2/pmem2_vm_reservation_map_find.3 ../utils/md2man.sh libpmem2/pmem2_source_pread_mcsafe.3.md default.man libpmem2/pmem2_source_pread_mcsafe.3 ../utils/md2man.sh pmempool/pmempool.1.md default.man pmempool/pmempool.1 ../utils/md2man.sh pmempool/pmempool-info.1.md default.man pmempool/pmempool-info.1 ../utils/md2man.sh pmempool/pmempool-create.1.md default.man pmempool/pmempool-create.1 ../utils/md2man.sh pmempool/pmempool-check.1.md default.man pmempool/pmempool-check.1 ../utils/md2man.sh pmempool/pmempool-dump.1.md default.man pmempool/pmempool-dump.1 ../utils/md2man.sh pmempool/pmempool-rm.1.md default.man pmempool/pmempool-rm.1 ../utils/md2man.sh pmempool/pmempool-convert.1.md default.man pmempool/pmempool-convert.1 ../utils/md2man.sh pmempool/pmempool-sync.1.md default.man pmempool/pmempool-sync.1 ../utils/md2man.sh pmempool/pmempool-transform.1.md default.man pmempool/pmempool-transform.1 ../utils/md2man.sh pmempool/pmempool-feature.1.md default.man pmempool/pmempool-feature.1 ../utils/md2man.sh pmreorder/pmreorder.1.md default.man pmreorder/pmreorder.1 ../utils/md2man.sh daxio/daxio.1.md default.man daxio/daxio.1 make[1]: Leaving directory '/lkp/benchmarks/nvml/doc' make -C src all make[1]: Entering directory '/lkp/benchmarks/nvml/src' make -C libpmem make -C common make -C core make -C libpmem2 make[2]: Entering directory '/lkp/benchmarks/nvml/src/libpmem' make[2]: Entering directory '/lkp/benchmarks/nvml/src/common' make[2]: Entering directory '/lkp/benchmarks/nvml/src/libpmem2' make[2]: Entering directory '/lkp/benchmarks/nvml/src/core' mkdir -p ../nondebug/common mkdir -p ../nondebug/common/.. mkdir -p ../nondebug/core mkdir -p ../nondebug/core/.. ar: creating ../debug/libpmem2/../libpmem2.a ar: creating ../nondebug/libpmempool/../libpmempool.a clang -MD -c -o ../nondebug/core/alloc.o -std=gnu99 -Wall -Werror -Wmissing-prototypes -Wpointer-arith -Wsign-conversion -Wsign-compare -Wunused-parameter -fstack-usage -Wconversion -Wunused-macros -Wmissing-field-initializers -Wunreachable-code-return -Wmissing-variable-declarations -Wfloat-equal -Wswitch-default -Wcast-function-type -O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=2 -std=gnu99 -fno-common -pthread -DSRCVERSION=\"2.1.1+git13.gd4da1b173\" -fno-lto -DSDS_ENABLED -DNDCTL_ENABLED=1 -DPAGE_SIZE=4096 -DUSE_VALGRIND -Wno-error -I../include -I../common/ -I../core/ -fPIC alloc.c ar: creating ../nondebug/libpmemobj/../libpmemobj.a ar: creating ../debug/libpmempool/../libpmempool.a ar: creating ../debug/libpmemobj/../libpmemobj.a ar: creating libhashmap_atomic.a ar: creating libhashmap_tx.a ar: creating libhashmap_rp.a ar: creating libctree_map.a ar: ar: creating libskiplist_map.a creating libbtree_map.a ar: creating librtree_map.a ar: creating libslab_allocator.a ar: creating librbtree_map.a ar: creating libart.a ar: creating libmap_ctree.a ar: creating libmap_btree.a ar: creating libmap_rbtree.a ar: creating libmap_skiplist.a ar: creating libmap_hashmap_atomic.a ar: creating libmap_hashmap_tx.a ar: creating libmap_hashmap_rp.a ar: creating libmap_rtree.a ar: creating libmap.a ar: creating libut.a clang -MD -c -o ../nondebug/common/bad_blocks.o -std=gnu99 -Wall -Werror -Wmissing-prototypes -Wpointer-arith -Wsign-conversion -Wsign-compare -Wunused-parameter -fstack-usage -Wconversion -Wunused-macros -Wmissing-field-initializers -Wunreachable-code-return -Wmissing-variable-declarations -Wfloat-equal -Wswitch-default -Wcast-function-type -O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=2 -std=gnu99 -fno-common -pthread -DSRCVERSION=\"2.1.1+git13.gd4da1b173\" -fno-lto -DSDS_ENABLED -DNDCTL_ENABLED=1 -DPAGE_SIZE=4096 -DUSE_VALGRIND -Wno-error -DUSE_LIBDL -I../include -I../common/ -I../core/ -fPIC bad_blocks.c loop: module loaded loop0: detected capacity change from 0 to 409600 EXT4-fs (loop0): VFS: Can't find ext4 filesystem EXT4-fs (loop0): VFS: Can't find ext4 filesystem Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] SMP KASAN PTI KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] CPU: 3 UID: 0 PID: 42994 Comm: mount Tainted: G S 6.18.0-rc5-00215-g45f3d9974e38 #1 PREEMPT(voluntary) Tainted: [S]=CPU_OUT_OF_SPEC Hardware name: Dell Inc. OptiPlex 9020/0DNKMN, BIOS A05 12/05/2013 RIP: 0010:fuse_kill_sb_blk+0x1e6/0x330 [fuse] Code: 00 00 00 00 00 fc ff df 48 c1 ea 03 80 3c 02 00 75 6a 48 8b 9b 90 03 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 da 48 c1 ea 03 <80> 3c 02 00 75 60 48 8b 3b e8 ec f8 ff ff 48 85 db 74 1a 48 83 c4 RSP: 0018:ffffc900022dfbc8 EFLAGS: 00010246 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffffffff81580d23 RDX: 0000000000000000 RSI: 0000000000000008 RDI: ffff8882004c8014 RBP: ffffffffc020dba0 R08: 0000000000000001 R09: ffffed1040099000 R10: ffff8882004c8007 R11: ffffffff81e792d8 R12: 00000000ffffffea R13: ffff88810dc18390 R14: ffffffffc0446ab0 R15: 00000000ffffffea FS: 00007ff3e6309840(0000) GS:ffff88821483e000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055c480d92328 CR3: 00000001ec872005 CR4: 00000000001726f0 Call Trace: ? __pfx_fuse_fill_super+0x10/0x10 [fuse] deactivate_locked_super+0xa4/0x190 get_tree_bdev_flags+0x3d5/0x5c0 ? __pfx_get_tree_bdev_flags+0x10/0x10 ? __kmalloc_cache_noprof+0x159/0x590 ? fuse_conn_init+0x858/0xb80 [fuse] fuse_get_tree+0x349/0x580 [fuse] vfs_get_tree+0x83/0x2d0 vfs_cmd_create+0xb2/0x230 __do_sys_fsconfig+0x631/0xa40 ? __pfx___do_sys_fsconfig+0x10/0x10 ? anon_inode_getfd+0x4d/0x70 do_syscall_64+0x7b/0x10a0 ? __x64_sys_statx+0x149/0x1c0 ? do_syscall_64+0xad/0x10a0 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7ff3e652e4aa Code: 73 01 c3 48 8b 0d 4e 59 0d 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 49 89 ca b8 af 01 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 1e 59 0d 00 f7 d8 64 89 01 48 RSP: 002b:00007ffc498b8a88 EFLAGS: 00000246 ORIG_RAX: 00000000000001af RAX: ffffffffffffffda RBX: 0000563d6a570210 RCX: 00007ff3e652e4aa RDX: 0000000000000000 RSI: 0000000000000006 RDI: 0000000000000004 RBP: 0000563d6a571d40 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007ff3e66c0580 R14: 00007ff3e66c226c R15: 00007ff3e66a7a23 Modules linked in: loop binfmt_misc btrfs blake2b_generic xor zstd_compress raid6_pq intel_rapl_msr intel_rapl_common x86_pkg_temp_thermal intel_powerclamp coretemp snd_hda_codec_intelhdmi snd_hda_codec_hdmi sd_mod sg snd_hda_codec_alc269 snd_hda_scodec_component kvm_intel snd_hda_codec_realtek_lib platform_profile i915 snd_hda_codec_generic kvm snd_hda_intel dell_wmi snd_hda_codec intel_gtt irqbypass drm_buddy dell_smbios ghash_clmulni_intel dell_wmi_descriptor ttm snd_hda_core ahci sparse_keymap rapl drm_display_helper intel_cstate rfkill libahci snd_intel_dspcfg cec snd_intel_sdw_acpi snd_hwdep mei_wdt dcdbas i2c_i801 drm_client_lib intel_uncore libata snd_pcm i2c_smbus pcspkr drm_kms_helper lpc_ich mei_me snd_timer snd mei soundcore video wmi drm fuse nfnetlink ---[ end trace 0000000000000000 ]--- RIP: 0010:fuse_kill_sb_blk+0x1e6/0x330 [fuse] Code: 00 00 00 00 00 fc ff df 48 c1 ea 03 80 3c 02 00 75 6a 48 8b 9b 90 03 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 da 48 c1 ea 03 <80> 3c 02 00 75 60 48 8b 3b e8 ec f8 ff ff 48 85 db 74 1a 48 83 c4 RSP: 0018:ffffc900022dfbc8 EFLAGS: 00010246 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffffffff81580d23 RDX: 0000000000000000 RSI: 0000000000000008 RDI: ffff8882004c8014 RBP: ffffffffc020dba0 R08: 0000000000000001 R09: ffffed1040099000 R10: ffff8882004c8007 R11: ffffffff81e792d8 R12: 00000000ffffffea R13: ffff88810dc18390 R14: ffffffffc0446ab0 R15: 00000000ffffffea FS: 00007ff3e6309840(0000) GS:ffff88821483e000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055c480d92328 CR3: 00000001ec872005 CR4: 00000000001726f0 Kernel panic - not syncing: Fatal exception Kernel Offset: disabled