Decompressing Linux... No EFI environment detected. Parsing ELF... No relocation needed... done. Booting the kernel (entry_offset: 0x0000000005c3fc50). Linux version 6.18.0-rc5-00236-g142f20971642 (kbuild@67d69d2fe1a4) (gcc-14 (Debian 14.2.0-19) 14.2.0, GNU ld (GNU Binutils for Debian) 2.44) #1 SMP PREEMPT_DYNAMIC Thu Dec 4 14:37:16 CST 2025 Command line: ip=::::lkp-skl-d02::dhcp root=/dev/ram0 RESULT_ROOT=/result/lkvs/rapl-client/lkp-skl-d02/debian-13-x86_64-20250902.cgz/x86_64-rhel-9.4-func/gcc-14/142f20971642be40507d3a0bc94e905e251db81a/0 BOOT_IMAGE=/pkg/linux/x86_64-rhel-9.4-func/gcc-14/142f20971642be40507d3a0bc94e905e251db81a/vmlinuz-6.18.0-rc5-00236-g142f20971642 branch=linux-review/Philipp-Stanner/dma-buf-dma-fence-Unify-return-codes-for-signalled-fences/20251125-184735 job=/lkp/jobs/scheduled/lkp-skl-d02/lkvs-rapl-client-debian-13-x86_64-20250902.cgz-142f20971642-20251204-4017965-mi6ow3-1.yaml user=lkp ARCH=x86_64 kconfig=x86_64-rhel-9.4-func commit=142f20971642be40507d3a0bc94e905e251db81a intremap=posted_msi max_uptime=7200 LKP_SERVER=internal-lkp-server nokaslr selinux=0 debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 net.ifnames=0 printk.devkmsg=on panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 drbd.minor_count=8 systemd.log_level=err ignore_loglevel console=tty0 e x86/CPU: Running old microcode BIOS-provided physical RAM map: BIOS-e820: [mem 0x0000000000000100-0x000000000009c7ff] usable BIOS-e820: [mem 0x000000000009c800-0x000000000009ffff] reserved BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved BIOS-e820: [mem 0x0000000000100000-0x0000000077b40fff] usable BIOS-e820: [mem 0x0000000077b41000-0x0000000077b41fff] ACPI NVS BIOS-e820: [mem 0x0000000077b42000-0x0000000077b6bfff] reserved BIOS-e820: [mem 0x0000000077b6c000-0x0000000077bbdfff] usable BIOS-e820: [mem 0x0000000077bbe000-0x00000000783befff] reserved BIOS-e820: [mem 0x00000000783bf000-0x0000000086f56fff] usable BIOS-e820: [mem 0x0000000086f57000-0x00000000872bcfff] reserved BIOS-e820: [mem 0x00000000872bd000-0x0000000087309fff] ACPI data BIOS-e820: [mem 0x000000008730a000-0x0000000087abefff] ACPI NVS BIOS-e820: [mem 0x0000000087abf000-0x0000000087ffefff] reserved BIOS-e820: [mem 0x0000000087fff000-0x0000000087ffffff] usable BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved BIOS-e820: [mem 0x0000000100000000-0x0000000871ffffff] usable printk: debug: ignoring loglevel setting. printk: legacy bootconsole [earlyser0] enabled NX (Execute Disable) protection: active APIC: Static calls initialized SMBIOS 2.8 present. DMI: Dell Inc. OptiPlex 7040/0Y7WYT, BIOS 1.1.1 10/07/2015 DMI: Memory slots populated: 4/4 tsc: Detected 3200.000 MHz processor tsc: Detected 3199.980 MHz TSC e820: update [mem 0x00000000-0x00000fff] usable ==> reserved e820: remove [mem 0x000a0000-0x000fffff] usable last_pfn = 0x872000 max_arch_pfn = 0x400000000 MTRR map: 4 entries (3 fixed + 1 variable; max 23), built from 10 variable MTRRs x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT last_pfn = 0x88000 max_arch_pfn = 0x400000000 Scan for SMP in [mem 0x00000000-0x000003ff] Scan for SMP in [mem 0x0009fc00-0x0009ffff] Scan for SMP in [mem 0x000f0000-0x000fffff] found SMP MP-table at [mem 0x000fcde0-0x000fcdef] mpc: fcbb0-fcd5c Using GB pages for direct mapping RAMDISK: [mem 0x82f408000-0x86a7fffff] ACPI: Early table checksum verification disabled ACPI: RSDP 0x00000000000F05B0 000024 (v02 DELL ) ACPI: XSDT 0x00000000872DD0A0 0000C4 (v01 DELL CBX3 01072009 AMI 00010013) ACPI: FACP 0x00000000872FE7C0 00010C (v05 DELL CBX3 01072009 AMI 00010013) ACPI: DSDT 0x00000000872DD1F8 0215C8 (v02 DELL CBX3 01072009 INTL 20120913) ACPI: FACS 0x0000000087ABEF80 000040 ACPI: APIC 0x00000000872FE8D0 000084 (v03 DELL CBX3 01072009 AMI 00010013) ACPI: FPDT 0x00000000872FE958 000044 (v01 DELL CBX3 01072009 AMI 00010013) ACPI: FIDT 0x00000000872FE9A0 00009C (v01 DELL CBX3 01072009 AMI 00010013) ACPI: MCFG 0x00000000872FEA40 00003C (v01 DELL CBX3 01072009 MSFT 00000097) ACPI: HPET 0x00000000872FEA80 000038 (v01 DELL CBX3 01072009 AMI. 0005000B) ACPI: SSDT 0x00000000872FEAB8 00036D (v01 SataRe SataTabl 00001000 INTL 20120913) ACPI: SSDT 0x00000000872FEE28 0053B2 (v02 SaSsdt SaSsdt 00003000 INTL 20120913) ACPI: UEFI 0x00000000873041E0 000042 (v01 00000000 00000000) ACPI: LPIT 0x0000000087304228 000094 (v01 INTEL SKL 00000000 MSFT 0000005F) ACPI: SSDT 0x00000000873042C0 000248 (v02 INTEL sensrhub 00000000 INTL 20120913) ACPI: SSDT 0x0000000087304508 002BAE (v02 INTEL PtidDevc 00001000 INTL 20120913) ACPI: SSDT 0x00000000873070B8 000C45 (v02 INTEL Ther_Rvp 00001000 INTL 20120913) ACPI: DBGP 0x0000000087307D00 000034 (v01 INTEL 00000000 MSFT 0000005F) ACPI: DBG2 0x0000000087307D38 000054 (v00 INTEL 00000000 MSFT 0000005F) ACPI: SSDT 0x0000000087307D90 000613 (v02 INTEL DELL__MT 00000000 INTL 20120913) ACPI: SSDT 0x00000000873083A8 000E58 (v02 CpuRef CpuSsdt 00003000 INTL 20120913) ACPI: SLIC 0x0000000087309200 000176 (v03 DELL CBX3 01072009 MSFT 00010013) ACPI: DMAR 0x0000000087309378 0000A8 (v01 INTEL SKL 00000001 INTL 00000001) ACPI: ASF! 0x0000000087309420 0000A5 (v32 INTEL HCG 00000001 TFSM 000F4240) ACPI: Reserving FACP table memory at [mem 0x872fe7c0-0x872fe8cb] ACPI: Reserving DSDT table memory at [mem 0x872dd1f8-0x872fe7bf] ACPI: Reserving FACS table memory at [mem 0x87abef80-0x87abefbf] ACPI: Reserving APIC table memory at [mem 0x872fe8d0-0x872fe953] ACPI: Reserving FPDT table memory at [mem 0x872fe958-0x872fe99b] ACPI: Reserving FIDT table memory at [mem 0x872fe9a0-0x872fea3b] ACPI: Reserving MCFG table memory at [mem 0x872fea40-0x872fea7b] ACPI: Reserving HPET table memory at [mem 0x872fea80-0x872feab7] ACPI: Reserving SSDT table memory at [mem 0x872feab8-0x872fee24] ACPI: Reserving SSDT table memory at [mem 0x872fee28-0x873041d9] ACPI: Reserving UEFI table memory at [mem 0x873041e0-0x87304221] ACPI: Reserving LPIT table memory at [mem 0x87304228-0x873042bb] ACPI: Reserving SSDT table memory at [mem 0x873042c0-0x87304507] ACPI: Reserving SSDT table memory at [mem 0x87304508-0x873070b5] ACPI: Reserving SSDT table memory at [mem 0x873070b8-0x87307cfc] ACPI: Reserving DBGP table memory at [mem 0x87307d00-0x87307d33] ACPI: Reserving DBG2 table memory at [mem 0x87307d38-0x87307d8b] ACPI: Reserving SSDT table memory at [mem 0x87307d90-0x873083a2] ACPI: Reserving SSDT table memory at [mem 0x873083a8-0x873091ff] ACPI: Reserving SLIC table memory at [mem 0x87309200-0x87309375] ACPI: Reserving DMAR table memory at [mem 0x87309378-0x8730941f] ACPI: Reserving ASF! table memory at [mem 0x87309420-0x873094c4] Mapped APIC to ffffffffff5fc000 ( fee00000) No NUMA configuration found Faking a node at [mem 0x0000000000000000-0x0000000871ffffff] NODE_DATA(0) allocated [mem 0x871fd5280-0x871ffffff] cma: Reserved 200 MiB at 0x0000000100000000 Zone ranges: DMA [mem 0x0000000000001000-0x0000000000ffffff] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] Normal [mem 0x0000000100000000-0x0000000871ffffff] Device empty Movable zone start for each node Early memory node ranges node 0: [mem 0x0000000000001000-0x000000000009bfff] node 0: [mem 0x0000000000100000-0x0000000077b40fff] node 0: [mem 0x0000000077b6c000-0x0000000077bbdfff] node 0: [mem 0x00000000783bf000-0x0000000086f56fff] node 0: [mem 0x0000000087fff000-0x0000000087ffffff] node 0: [mem 0x0000000100000000-0x0000000871ffffff] Initmem setup node 0 [mem 0x0000000000001000-0x0000000871ffffff] On node 0, zone DMA: 1 pages in unavailable ranges On node 0, zone DMA: 100 pages in unavailable ranges On node 0, zone DMA32: 43 pages in unavailable ranges On node 0, zone DMA32: 2049 pages in unavailable ranges On node 0, zone DMA32: 4264 pages in unavailable ranges On node 0, zone Normal: 24576 pages in unavailable ranges KernelAddressSanitizer initialized (generic) Reserving Intel graphics memory at [mem 0x8a000000-0x8bffffff] ACPI: PM-Timer IO Port: 0x1808 ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 2, APIC INT 02 ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 2, APIC INT 09 Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 2, APIC INT 01 Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 2, APIC INT 03 Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 2, APIC INT 04 Int: type 0, pol 0, trig 0, bus 00, IRQ 05, APIC ID 2, APIC INT 05 Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 2, APIC INT 06 Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 2, APIC INT 07 Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 2, APIC INT 08 Int: type 0, pol 0, trig 0, bus 00, IRQ 0a, APIC ID 2, APIC INT 0a Int: type 0, pol 0, trig 0, bus 00, IRQ 0b, APIC ID 2, APIC INT 0b Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 2, APIC INT 0c Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 2, APIC INT 0d Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 2, APIC INT 0e Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 2, APIC INT 0f ACPI: Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8086a701 base: 0xfed00000 [Firmware Bug]: TSC_DEADLINE disabled due to Errata; please update microcode to version: 0xb2 (or later) CPU topo: Max. logical packages: 1 CPU topo: Max. logical dies: 1 CPU topo: Max. dies per package: 1 CPU topo: Max. threads per core: 1 CPU topo: Num. cores per package: 4 CPU topo: Num. threads per package: 4 CPU topo: Allowing 4 present CPUs plus 0 hotplug CPUs mapped IOAPIC to ffffffffff5fb000 (fec00000) PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] PM: hibernation: Registered nosave memory: [mem 0x0009c000-0x000fffff] PM: hibernation: Registered nosave memory: [mem 0x77b41000-0x77b6bfff] PM: hibernation: Registered nosave memory: [mem 0x77bbe000-0x783befff] PM: hibernation: Registered nosave memory: [mem 0x86f57000-0x87ffefff] PM: hibernation: Registered nosave memory: [mem 0x88000000-0xffffffff] [mem 0x8c000000-0xdfffffff] available for PCI devices Booting paravirtualized kernel on bare hardware clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 percpu: Embedded 78 pages/cpu s282624 r8192 d28672 u524288 pcpu-alloc: s282624 r8192 d28672 u524288 alloc=1*2097152 pcpu-alloc: [0] 0 1 2 3 Kernel command line: ip=::::lkp-skl-d02::dhcp root=/dev/ram0 RESULT_ROOT=/result/lkvs/rapl-client/lkp-skl-d02/debian-13-x86_64-20250902.cgz/x86_64-rhel-9.4-func/gcc-14/142f20971642be40507d3a0bc94e905e251db81a/0 BOOT_IMAGE=/pkg/linux/x86_64-rhel-9.4-func/gcc-14/142f20971642be40507d3a0bc94e905e251db81a/vmlinuz-6.18.0-rc5-00236-g142f20971642 branch=linux-review/Philipp-Stanner/dma-buf-dma-fence-Unify-return-codes-for-signalled-fences/20251125-184735 job=/lkp/jobs/scheduled/lkp-skl-d02/lkvs-rapl-client-debian-13-x86_64-20250902.cgz-142f20971642-20251204-4017965-mi6ow3-1.yaml user=lkp ARCH=x86_64 kconfig=x86_64-rhel-9.4-func commit=142f20971642be40507d3a0bc94e905e251db81a intremap=posted_msi max_uptime=7200 LKP_SERVER=internal-lkp-server nokaslr selinux=0 debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 net.ifnames=0 printk.devkmsg=on panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 drbd.minor_count=8 systemd.log_level=err ignore_loglevel console sysrq: sysrq always enabled. ignoring the deprecated load_ramdisk= option Unknown kernel command line parameters "nokaslr RESULT_ROOT=/result/lkvs/rapl-client/lkp-skl-d02/debian-13-x86_64-20250902.cgz/x86_64-rhel-9.4-func/gcc-14/142f20971642be40507d3a0bc94e905e251db81a/0 branch=linux-review/Philipp-Stanner/dma-buf-dma-fence-Unify-return-codes-for-signalled-fences/20251125-184735 job=/lkp/jobs/scheduled/lkp-skl-d02/lkvs-rapl-client-debian-13-x86_64-20250902.cgz-142f20971642-20251204-4017965-mi6ow3-1.yaml user=lkp ARCH=x86_64 kconfig=x86_64-rhel-9.4-func commit=142f20971642be40507d3a0bc94e905e251db81a max_uptime=7200 LKP_SERVER=internal-lkp-server prompt_ramdisk=0 vga=normal", will be passed to user space. random: crng init done printk: log buffer data + meta data: 1048576 + 3670016 = 4718592 bytes Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear) Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) software IO TLB: area num 4. Fallback order for Node 0: 0 Built 1 zonelists, mobility grouping on. Total pages: 8357575 Policy zone: Normal mem auto-init: stack:off, heap alloc:off, heap free:off stackdepot: allocating hash table via alloc_large_system_hash stackdepot hash table entries: 1048576 (order: 12, 16777216 bytes, linear) stackdepot: allocating space for 8192 stack pools via memblock SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 Kernel/User page tables isolation: enabled Poking KASLR using RDRAND RDTSC... ftrace: allocating 56257 entries in 220 pages ftrace: allocated 220 pages with 5 groups Dynamic Preempt: voluntary rcu: Preemptible hierarchical RCU implementation. rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4. RCU CPU stall warnings timeout set to 100 (rcu_cpu_stall_timeout). Trampoline variant of Tasks RCU enabled. Rude variant of Tasks RCU enabled. Tracing variant of Tasks RCU enabled. rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. NR_IRQS: 524544, nr_irqs: 1024, preallocated irqs: 16 rcu: srcu_init: Setting srcu_struct sizes based on contention. Console: colour VGA+ 80x25 printk: legacy console [tty0] enabled printk: legacy console [ttyS0] enabled printk: legacy console [ttyS0] enabled printk: legacy bootconsole [earlyser0] disabled printk: legacy bootconsole [earlyser0] disabled ACPI: Core revision 20250807 clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns APIC: Switch to symmetric I/O mode setup DMAR: Host address width 39 DMAR: DRHD base: 0x000000fed90000 flags: 0x0 DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e3ff0505e DMAR: DRHD base: 0x000000fed91000 flags: 0x1 DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da DMAR: RMRR base: 0x0000008715f000 end: 0x0000008717efff DMAR: RMRR base: 0x00000089800000 end: 0x0000008bffffff DMAR: [Firmware Bug]: No firmware reserved region can cover this RMRR [0x0000000089800000-0x000000008bffffff], contact BIOS vendor for fixes DMAR: [Firmware Bug]: Your BIOS is broken; bad RMRR [0x0000000089800000-0x000000008bffffff] BIOS vendor: Dell Inc.; Ver: 1.1.1; Product Version: DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1 DMAR-IR: HPET id 0 under DRHD base 0xfed91000 DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit. DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting. DMAR-IR: IRQ remapping was enabled on dmar0 but we are not in kdump mode DMAR-IR: Enabled IRQ remapping in xapic mode x2apic: IRQ remapping doesn't support X2APIC mode Masked ExtINT on CPU#0 ENABLING IO-APIC IRQs Init IO_APIC IRQs apic 2 pin 0 not connected IOAPIC[2]: Set IRTE entry (P:1 FPD:0 Dst_Mode:0 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:0 Avail:0 Vector:EF Dest:00000000 SID:F0F8 SQ:0 SVT:1) IOAPIC[0]: Preconfigured routing entry (2-1 -> IRQ 1 Level:0 ActiveLow:0) IOAPIC[2]: Set IRTE entry (P:1 FPD:0 Dst_Mode:0 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:0 Avail:0 Vector:30 Dest:00000000 SID:F0F8 SQ:0 SVT:1) IOAPIC[0]: Preconfigured routing entry (2-2 -> IRQ 0 Level:0 ActiveLow:0) IOAPIC[2]: Set IRTE entry (P:1 FPD:0 Dst_Mode:0 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:0 Avail:0 Vector:EF Dest:00000000 SID:F0F8 SQ:0 SVT:1) IOAPIC[0]: Preconfigured routing entry (2-3 -> IRQ 3 Level:0 ActiveLow:0) IOAPIC[2]: Set IRTE entry (P:1 FPD:0 Dst_Mode:0 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:0 Avail:0 Vector:EF Dest:00000000 SID:F0F8 SQ:0 SVT:1) IOAPIC[0]: Preconfigured routing entry (2-4 -> IRQ 4 Level:0 ActiveLow:0) IOAPIC[2]: Set IRTE entry (P:1 FPD:0 Dst_Mode:0 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:0 Avail:0 Vector:EF Dest:00000000 SID:F0F8 SQ:0 SVT:1) IOAPIC[0]: Preconfigured routing entry (2-5 -> IRQ 5 Level:0 ActiveLow:0) IOAPIC[2]: Set IRTE entry (P:1 FPD:0 Dst_Mode:0 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:0 Avail:0 Vector:EF Dest:00000000 SID:F0F8 SQ:0 SVT:1) IOAPIC[0]: Preconfigured routing entry (2-6 -> IRQ 6 Level:0 ActiveLow:0) IOAPIC[2]: Set IRTE entry (P:1 FPD:0 Dst_Mode:0 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:0 Avail:0 Vector:EF Dest:00000000 SID:F0F8 SQ:0 SVT:1) IOAPIC[0]: Preconfigured routing entry (2-7 -> IRQ 7 Level:0 ActiveLow:0) IOAPIC[2]: Set IRTE entry (P:1 FPD:0 Dst_Mode:0 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:0 Avail:0 Vector:EF Dest:00000000 SID:F0F8 SQ:0 SVT:1) IOAPIC[0]: Preconfigured routing entry (2-8 -> IRQ 8 Level:0 ActiveLow:0) IOAPIC[2]: Set IRTE entry (P:1 FPD:0 Dst_Mode:0 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:0 Avail:0 Vector:EF Dest:00000000 SID:F0F8 SQ:0 SVT:1) IOAPIC[0]: Preconfigured routing entry (2-9 -> IRQ 9 Level:1 ActiveLow:0) IOAPIC[2]: Set IRTE entry (P:1 FPD:0 Dst_Mode:0 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:0 Avail:0 Vector:EF Dest:00000000 SID:F0F8 SQ:0 SVT:1) IOAPIC[0]: Preconfigured routing entry (2-10 -> IRQ 10 Level:0 ActiveLow:0) IOAPIC[2]: Set IRTE entry (P:1 FPD:0 Dst_Mode:0 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:0 Avail:0 Vector:EF Dest:00000000 SID:F0F8 SQ:0 SVT:1) IOAPIC[0]: Preconfigured routing entry (2-11 -> IRQ 11 Level:0 ActiveLow:0) IOAPIC[2]: Set IRTE entry (P:1 FPD:0 Dst_Mode:0 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:0 Avail:0 Vector:EF Dest:00000000 SID:F0F8 SQ:0 SVT:1) IOAPIC[0]: Preconfigured routing entry (2-12 -> IRQ 12 Level:0 ActiveLow:0) IOAPIC[2]: Set IRTE entry (P:1 FPD:0 Dst_Mode:0 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:0 Avail:0 Vector:EF Dest:00000000 SID:F0F8 SQ:0 SVT:1) IOAPIC[0]: Preconfigured routing entry (2-13 -> IRQ 13 Level:0 ActiveLow:0) IOAPIC[2]: Set IRTE entry (P:1 FPD:0 Dst_Mode:0 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:0 Avail:0 Vector:EF Dest:00000000 SID:F0F8 SQ:0 SVT:1) IOAPIC[0]: Preconfigured routing entry (2-14 -> IRQ 14 Level:0 ActiveLow:0) IOAPIC[2]: Set IRTE entry (P:1 FPD:0 Dst_Mode:0 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:0 Avail:0 Vector:EF Dest:00000000 SID:F0F8 SQ:0 SVT:1) IOAPIC[0]: Preconfigured routing entry (2-15 -> IRQ 15 Level:0 ActiveLow:0) apic 2 pin 16 not connected apic 2 pin 17 not connected apic 2 pin 18 not connected apic 2 pin 19 not connected apic 2 pin 20 not connected apic 2 pin 21 not connected apic 2 pin 22 not connected apic 2 pin 23 not connected apic 2 pin 24 not connected apic 2 pin 25 not connected apic 2 pin 26 not connected apic 2 pin 27 not connected apic 2 pin 28 not connected apic 2 pin 29 not connected apic 2 pin 30 not connected apic 2 pin 31 not connected apic 2 pin 32 not connected apic 2 pin 33 not connected apic 2 pin 34 not connected apic 2 pin 35 not connected apic 2 pin 36 not connected apic 2 pin 37 not connected apic 2 pin 38 not connected apic 2 pin 39 not connected apic 2 pin 40 not connected apic 2 pin 41 not connected apic 2 pin 42 not connected apic 2 pin 43 not connected apic 2 pin 44 not connected apic 2 pin 45 not connected apic 2 pin 46 not connected apic 2 pin 47 not connected apic 2 pin 48 not connected apic 2 pin 49 not connected apic 2 pin 50 not connected apic 2 pin 51 not connected apic 2 pin 52 not connected apic 2 pin 53 not connected apic 2 pin 54 not connected apic 2 pin 55 not connected apic 2 pin 56 not connected apic 2 pin 57 not connected apic 2 pin 58 not connected apic 2 pin 59 not connected apic 2 pin 60 not connected apic 2 pin 61 not connected apic 2 pin 62 not connected apic 2 pin 63 not connected apic 2 pin 64 not connected apic 2 pin 65 not connected apic 2 pin 66 not connected apic 2 pin 67 not connected apic 2 pin 68 not connected apic 2 pin 69 not connected apic 2 pin 70 not connected apic 2 pin 71 not connected apic 2 pin 72 not connected apic 2 pin 73 not connected apic 2 pin 74 not connected apic 2 pin 75 not connected apic 2 pin 76 not connected apic 2 pin 77 not connected apic 2 pin 78 not connected apic 2 pin 79 not connected apic 2 pin 80 not connected apic 2 pin 81 not connected apic 2 pin 82 not connected apic 2 pin 83 not connected apic 2 pin 84 not connected apic 2 pin 85 not connected apic 2 pin 86 not connected apic 2 pin 87 not connected apic 2 pin 88 not connected apic 2 pin 89 not connected apic 2 pin 90 not connected apic 2 pin 91 not connected apic 2 pin 92 not connected apic 2 pin 93 not connected apic 2 pin 94 not connected apic 2 pin 95 not connected apic 2 pin 96 not connected apic 2 pin 97 not connected apic 2 pin 98 not connected apic 2 pin 99 not connected apic 2 pin 100 not connected apic 2 pin 101 not connected apic 2 pin 102 not connected apic 2 pin 103 not connected apic 2 pin 104 not connected apic 2 pin 105 not connected apic 2 pin 106 not connected apic 2 pin 107 not connected apic 2 pin 108 not connected apic 2 pin 109 not connected apic 2 pin 110 not connected apic 2 pin 111 not connected apic 2 pin 112 not connected apic 2 pin 113 not connected apic 2 pin 114 not connected apic 2 pin 115 not connected apic 2 pin 116 not connected apic 2 pin 117 not connected apic 2 pin 118 not connected apic 2 pin 119 not connected ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2e2036ff8d5, max_idle_ns: 440795275316 ns Calibrating delay loop (skipped), value calculated using timer frequency.. 6399.96 BogoMIPS (lpj=3199980) CPU0: Thermal monitoring enabled (TM1) Last level iTLB entries: 4KB 128, 2MB 8, 4MB 8 Last level dTLB entries: 4KB 64, 2MB 32, 4MB 32, 1GB 4 process: using mwait in idle threads mitigations: Enabled attack vectors: user_kernel, user_user, guest_host, guest_guest, SMT mitigations: auto Speculative Store Bypass: Vulnerable SRBDS: Vulnerable: No microcode Spectre V2 : Mitigation: Retpolines RETBleed: Vulnerable MDS: Vulnerable: Clear CPU buffers attempted, no microcode TAA: Vulnerable: Clear CPU buffers attempted, no microcode MMIO Stale Data: Vulnerable: Clear CPU buffers attempted, no microcode VMSCAPE: Vulnerable Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization Spectre V2 : Spectre v2 / SpectreRSB: Filling RSB on context switch and VMEXIT GDS: Vulnerable: No microcode x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers' x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR' x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64 x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64 x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format. Freeing SMP alternatives memory: 52K pid_max: default: 32768 minimum: 301 LSM: initializing lsm=lockdown,capability,yama,ima,evm Yama: becoming mindful. Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) lapic timer already calibrated 24060 smpboot: CPU0: Intel(R) Core(TM) i5-6500 CPU @ 3.20GHz (family: 0x6, model: 0x5e, stepping: 0x3) Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver. ... version: 4 ... bit width: 48 ... generic counters: 8 ... generic bitmap: 00000000000000ff ... fixed-purpose counters: 3 ... fixed-purpose bitmap: 0000000000000007 ... value mask: 0000ffffffffffff ... max period: 00007fffffffffff ... global_ctrl mask: 00000007000000ff signal: max sigframe size: 1616 Estimated ratio of average max frequency by base frequency (times 1024): 1056 rcu: Hierarchical SRCU implementation. rcu: Max phase no-delay instances is 400. Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. smp: Bringing up secondary CPUs ... smpboot: x86: Booting SMP configuration: .... node #0, CPUs: #1 #2 #3 Masked ExtINT on CPU#1 Masked ExtINT on CPU#2 Masked ExtINT on CPU#3 smp: Brought up 1 node, 4 CPUs smpboot: Total of 4 processors activated (25599.84 BogoMIPS) node 0 deferred pages initialised in 53ms Memory: 27282448K/33430300K available (49779K kernel code, 17762K rwdata, 14832K rodata, 7568K init, 6568K bss, 5930284K reserved, 204800K cma-reserved) devtmpfs: initialized x86/mm: Memory block size: 128MB ACPI: PM: Registering ACPI NVS region [mem 0x77b41000-0x77b41fff] (4096 bytes) ACPI: PM: Registering ACPI NVS region [mem 0x8730a000-0x87abefff] (8081408 bytes) clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns posixtimers hash table entries: 2048 (order: 3, 32768 bytes, linear) futex hash table entries: 1024 (65536 bytes on 1 NUMA nodes, total 64 KiB, linear). pinctrl core: initialized pinctrl subsystem NET: Registered PF_NETLINK/PF_ROUTE protocol family DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations audit: initializing netlink subsys (disabled) audit: type=2000 audit(1764914923.339:1): state=initialized audit_enabled=0 res=1 thermal_sys: Registered thermal governor 'fair_share' thermal_sys: Registered thermal governor 'step_wise' thermal_sys: Registered thermal governor 'user_space' cpuidle: using governor menu ACPI FADT declares the system doesn't support PCIe ASPM, so disable it acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 PCI: ECAM [mem 0xe0000000-0xefffffff] (base 0xe0000000) for domain 0000 [bus 00-ff] PCI: ECAM [mem 0xe0000000-0xefffffff] reserved as E820 entry PCI: Using configuration type 1 for base access kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page ACPI: Added _OSI(Module Device) ACPI: Added _OSI(Processor Device) ACPI: Added _OSI(Processor Aggregator Device) ACPI: 8 ACPI AML tables successfully acquired and loaded ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored ACPI: Dynamic OEM Table Load: ACPI: SSDT 0xFFFF88810DCAA800 00037F (v02 PmRef Cpu0Cst 00003001 INTL 20120913) ACPI: Dynamic OEM Table Load: ACPI: SSDT 0xFFFF8881111D5000 0006A2 (v02 PmRef Cpu0Ist 00003000 INTL 20120913) ACPI: Dynamic OEM Table Load: ACPI: SSDT 0xFFFF88810E255F00 00008E (v02 PmRef Cpu0Hwp 00003000 INTL 20120913) ACPI: Dynamic OEM Table Load: ACPI: SSDT 0xFFFF88810E0C4C00 000130 (v02 PmRef HwpLvt 00003000 INTL 20120913) ACPI: Dynamic OEM Table Load: ACPI: SSDT 0xFFFF8881111E6000 0005AA (v02 PmRef ApIst 00003000 INTL 20120913) ACPI: Dynamic OEM Table Load: ACPI: SSDT 0xFFFF88810E0C4400 000119 (v02 PmRef ApHwp 00003000 INTL 20120913) ACPI: Dynamic OEM Table Load: ACPI: SSDT 0xFFFF888111154C00 000119 (v02 PmRef ApCst 00003000 INTL 20120913) ACPI: Interpreter enabled ACPI: PM: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug PCI: Using E820 reservations for host bridge windows ACPI: Enabled 7 GPEs in block 00 to 7F ACPI: \_SB_.PCI0.PEG0.PG00: New power resource ACPI: \_SB_.PCI0.PEG1.PG01: New power resource ACPI: \_SB_.PCI0.PEG2.PG02: New power resource ACPI: \_SB_.PCI0.RP09.PXSX.WRST: New power resource ACPI: \_SB_.PCI0.RP10.PXSX.WRST: New power resource ACPI: \_SB_.PCI0.RP11.PXSX.WRST: New power resource ACPI: \_SB_.PCI0.RP12.PXSX.WRST: New power resource ACPI: \_SB_.PCI0.RP13.PXSX.WRST: New power resource ACPI: \_SB_.PCI0.RP01.PXSX.WRST: New power resource ACPI: \_SB_.PCI0.RP02.PXSX.WRST: New power resource ACPI: \_SB_.PCI0.RP03.PXSX.WRST: New power resource ACPI: \_SB_.PCI0.RP04.PXSX.WRST: New power resource ACPI: \_SB_.PCI0.RP05.PXSX.WRST: New power resource ACPI: \_SB_.PCI0.RP06.PXSX.WRST: New power resource ACPI: \_SB_.PCI0.RP07.PXSX.WRST: New power resource ACPI: \_SB_.PCI0.RP08.PXSX.WRST: New power resource ACPI: \_SB_.PCI0.RP17.PXSX.WRST: New power resource ACPI: \_SB_.PCI0.RP18.PXSX.WRST: New power resource ACPI: \_SB_.PCI0.RP19.PXSX.WRST: New power resource ACPI: \_SB_.PCI0.RP20.PXSX.WRST: New power resource ACPI: \_SB_.PCI0.RP14.PXSX.WRST: New power resource ACPI: \_SB_.PCI0.RP15.PXSX.WRST: New power resource ACPI: \_SB_.PCI0.RP16.PXSX.WRST: New power resource ACPI: \_TZ_.FN00: New power resource ACPI: \_TZ_.FN01: New power resource ACPI: \_TZ_.FN02: New power resource ACPI: \_TZ_.FN03: New power resource ACPI: \_TZ_.FN04: New power resource ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR DPC] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration PCI host bridge to bus 0000:00 pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] pci_bus 0000:00: root bus resource [mem 0x8c000000-0xdfffffff window] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window] pci_bus 0000:00: root bus resource [bus 00-fe] pci 0000:00:00.0: [8086:191f] type 00 class 0x060000 conventional PCI endpoint pci 0000:00:01.0: [8086:1901] type 01 class 0x060400 PCIe Root Port pci 0000:00:01.0: PCI bridge to [bus 01] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold pci 0000:00:02.0: [8086:1912] type 00 class 0x030000 PCIe Root Complex Integrated Endpoint pci 0000:00:02.0: BAR 0 [mem 0xde000000-0xdeffffff 64bit] pci 0000:00:02.0: BAR 2 [mem 0xc0000000-0xcfffffff 64bit pref] pci 0000:00:02.0: BAR 4 [io 0xf000-0xf03f] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] pci 0000:00:14.0: [8086:a12f] type 00 class 0x0c0330 conventional PCI endpoint pci 0000:00:14.0: BAR 0 [mem 0xdf030000-0xdf03ffff 64bit] pci 0000:00:14.0: PME# supported from D3hot D3cold pci 0000:00:14.2: [8086:a131] type 00 class 0x118000 conventional PCI endpoint pci 0000:00:14.2: BAR 0 [mem 0xdf04e000-0xdf04efff 64bit] pci 0000:00:16.0: [8086:a13a] type 00 class 0x078000 conventional PCI endpoint pci 0000:00:16.0: BAR 0 [mem 0xdf04d000-0xdf04dfff 64bit] pci 0000:00:16.0: PME# supported from D3hot pci 0000:00:17.0: [8086:a102] type 00 class 0x010601 conventional PCI endpoint pci 0000:00:17.0: BAR 0 [mem 0xdf048000-0xdf049fff] pci 0000:00:17.0: BAR 1 [mem 0xdf04c000-0xdf04c0ff] pci 0000:00:17.0: BAR 2 [io 0xf090-0xf097] pci 0000:00:17.0: BAR 3 [io 0xf080-0xf083] pci 0000:00:17.0: BAR 4 [io 0xf060-0xf07f] pci 0000:00:17.0: BAR 5 [mem 0xdf04b000-0xdf04b7ff] pci 0000:00:17.0: PME# supported from D3hot pci 0000:00:1c.0: [8086:a110] type 01 class 0x060400 PCIe Root Port pci 0000:00:1c.0: PCI bridge to [bus 02-03] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1f.0: [8086:a146] type 00 class 0x060100 conventional PCI endpoint pci 0000:00:1f.2: [8086:a121] type 00 class 0x058000 conventional PCI endpoint pci 0000:00:1f.2: BAR 0 [mem 0xdf044000-0xdf047fff] pci 0000:00:1f.3: [8086:a170] type 00 class 0x040300 conventional PCI endpoint pci 0000:00:1f.3: BAR 0 [mem 0xdf040000-0xdf043fff 64bit] pci 0000:00:1f.3: BAR 4 [mem 0xdf020000-0xdf02ffff 64bit] pci 0000:00:1f.3: PME# supported from D3hot D3cold pci 0000:00:1f.4: [8086:a123] type 00 class 0x0c0500 conventional PCI endpoint pci 0000:00:1f.4: BAR 0 [mem 0xdf04a000-0xdf04a0ff 64bit] pci 0000:00:1f.4: BAR 4 [io 0xf040-0xf05f] pci 0000:00:1f.6: [8086:15b7] type 00 class 0x020000 conventional PCI endpoint pci 0000:00:1f.6: BAR 0 [mem 0xdf000000-0xdf01ffff] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold pci 0000:00:01.0: PCI bridge to [bus 01] pci 0000:02:00.0: [104c:8240] type 01 class 0x060400 PCIe to PCI/PCI-X bridge pci 0000:02:00.0: PCI bridge to [bus 03] pci 0000:02:00.0: supports D1 D2 pci 0000:00:1c.0: PCI bridge to [bus 02-03] pci_bus 0000:03: extended config space not accessible pci 0000:02:00.0: PCI bridge to [bus 03] ACPI: PCI: Interrupt link LNKA configured for IRQ 7 ACPI: PCI: Interrupt link LNKA disabled ACPI: PCI: Interrupt link LNKB configured for IRQ 10 ACPI: PCI: Interrupt link LNKB disabled ACPI: PCI: Interrupt link LNKC configured for IRQ 5 ACPI: PCI: Interrupt link LNKC disabled ACPI: PCI: Interrupt link LNKD configured for IRQ 11 ACPI: PCI: Interrupt link LNKD disabled ACPI: PCI: Interrupt link LNKE configured for IRQ 7 ACPI: PCI: Interrupt link LNKE disabled ACPI: PCI: Interrupt link LNKF configured for IRQ 3 ACPI: PCI: Interrupt link LNKF disabled ACPI: PCI: Interrupt link LNKG configured for IRQ 4 ACPI: PCI: Interrupt link LNKG disabled ACPI: PCI: Interrupt link LNKH configured for IRQ 11 ACPI: PCI: Interrupt link LNKH disabled iommu: Default domain type: Translated iommu: DMA domain TLB invalidation policy: lazy mode SCSI subsystem initialized ACPI: bus type USB registered usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb pps_core: LinuxPPS API ver. 1 registered pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti PTP clock support registered EDAC MC: Ver: 3.0.0 NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO NetLabel: unlabeled traffic allowed by default PCI: Using ACPI for IRQ routing PCI: pci_cache_line_size set to 64 bytes e820: reserve RAM buffer [mem 0x0009c800-0x0009ffff] e820: reserve RAM buffer [mem 0x77b41000-0x77ffffff] e820: reserve RAM buffer [mem 0x77bbe000-0x77ffffff] e820: reserve RAM buffer [mem 0x86f57000-0x87ffffff] e820: reserve RAM buffer [mem 0x872000000-0x873ffffff] pci 0000:00:02.0: vgaarb: setting as boot VGA device pci 0000:00:02.0: vgaarb: bridge control possible pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 hpet0: 8 comparators, 64-bit 24.000000 MHz counter clocksource: Switched to clocksource tsc-early VFS: Disk quotas dquot_6.6.0 VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) netfs: FS-Cache loaded pnp: PnP ACPI init system 00:00: [io 0x0a00-0x0a3f] has been reserved system 00:00: [io 0x0a40-0x0a7f] has been reserved pnp 00:01: [dma 0 disabled] system 00:02: [io 0x0680-0x069f] has been reserved system 00:02: [io 0xffff] has been reserved system 00:02: [io 0xffff] has been reserved system 00:02: [io 0xffff] has been reserved system 00:02: [io 0x1800-0x18fe] could not be reserved system 00:02: [io 0x164e-0x164f] has been reserved system 00:03: [io 0x0800-0x087f] has been reserved system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved system 00:05: [mem 0xe0000000-0xefffffff] has been reserved system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved system 00:05: [mem 0xff000000-0xffffffff] has been reserved system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved system 00:05: [mem 0xdffe0000-0xdfffffff] has been reserved system 00:06: [mem 0xfd000000-0xfdabffff] has been reserved system 00:06: [mem 0xfdad0000-0xfdadffff] has been reserved system 00:06: [mem 0xfdb00000-0xfdffffff] has been reserved system 00:06: [mem 0xfe000000-0xfe01ffff] could not be reserved system 00:06: [mem 0xfe036000-0xfe03bfff] has been reserved system 00:06: [mem 0xfe03d000-0xfe3fffff] has been reserved system 00:06: [mem 0xfe410000-0xfe7fffff] has been reserved system 00:07: [io 0xff00-0xfffe] has been reserved system 00:08: [mem 0xfdaf0000-0xfdafffff] has been reserved system 00:08: [mem 0xfdae0000-0xfdaeffff] has been reserved system 00:08: [mem 0xfdac0000-0xfdacffff] has been reserved pnp: PnP ACPI: found 9 devices clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns NET: Registered PF_INET protocol family IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes, linear) Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear) TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) TCP: Hash tables configured (established 262144 bind 65536) MPTCP token hash table entries: 32768 (order: 7, 786432 bytes, linear) UDP hash table entries: 16384 (order: 8, 1048576 bytes, linear) UDP-Lite hash table entries: 16384 (order: 8, 1048576 bytes, linear) NET: Registered PF_UNIX/PF_LOCAL protocol family RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp-with-tls transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. NET: Registered PF_XDP protocol family pci 0000:00:01.0: PCI bridge to [bus 01] pci 0000:02:00.0: PCI bridge to [bus 03] pci 0000:00:1c.0: PCI bridge to [bus 02-03] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] pci_bus 0000:00: resource 7 [mem 0x8c000000-0xdfffffff window] pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window] IOAPIC[2]: Set IRTE entry (P:1 FPD:0 Dst_Mode:0 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:0 Avail:0 Vector:EF Dest:00000000 SID:F0F8 SQ:0 SVT:1) IOAPIC[0]: Preconfigured routing entry (2-18 -> IRQ 18 Level:1 ActiveLow:1) pci 0000:00:14.0: quirk_usb_early_handoff+0x0/0x2d0 took 25005 usecs PCI: CLS 0 bytes, default 64 pci 0000:00:1f.1: [8086:a120] type 00 class 0x058000 conventional PCI endpoint pci 0000:00:1f.1: BAR 0 [mem 0xfd000000-0xfdffffff 64bit] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) Trying to unpack rootfs image as initramfs... software IO TLB: mapped [mem 0x0000000082f57000-0x0000000086f57000] (64MB) Initialise system trusted keyrings Key type blacklist registered workingset: timestamp_bits=36 max_order=23 bucket_order=0 9p: Installing v9fs 9p2000 file system support integrity: Platform Keyring initialized integrity: Machine keyring initialized cryptd: max_cpu_qlen set to 1000 NET: Registered PF_ALG protocol family Key type asymmetric registered Asymmetric key parser 'x509' registered Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245) io scheduler mq-deadline registered io scheduler kyber registered io scheduler bfq registered IOAPIC[2]: Set IRTE entry (P:1 FPD:0 Dst_Mode:0 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:0 Avail:0 Vector:EF Dest:00000000 SID:F0F8 SQ:0 SVT:1) IOAPIC[0]: Preconfigured routing entry (2-16 -> IRQ 16 Level:1 ActiveLow:1) pcieport 0000:00:01.0: PME: Signaling with IRQ 120 pcieport 0000:00:1c.0: PME: Signaling with IRQ 121 pcieport 0000:00:1c.0: AER: enabled with IRQ 121 input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0 ACPI: button: Sleep Button [SLPB] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 ACPI: button: Power Button [PWRB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 ACPI: button: Power Button [PWRF] Monitor-Mwait will be used to enter C-1 state Monitor-Mwait will be used to enter C-2 state Monitor-Mwait will be used to enter C-3 state thermal LNXTHERM:00: registered as thermal_zone0 ACPI: thermal: Thermal Zone [TZ00] (28 C) thermal LNXTHERM:01: registered as thermal_zone1 ACPI: thermal: Thermal Zone [TZ01] (30 C) Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled 00:01: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A Non-volatile memory driver v1.3 rdac: device handler registered hp_sw: device handler registered emc: device handler registered alua: device handler registered e1000: Intel(R) PRO/1000 Network Driver e1000: Copyright (c) 1999-2006 Intel Corporation. e1000e: Intel(R) PRO/1000 Network Driver e1000e: Copyright(c) 1999 - 2015 Intel Corporation. IOAPIC[2]: Set IRTE entry (P:1 FPD:0 Dst_Mode:0 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:0 Avail:0 Vector:EF Dest:00000000 SID:F0F8 SQ:0 SVT:1) IOAPIC[0]: Preconfigured routing entry (2-19 -> IRQ 19 Level:1 ActiveLow:1) e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) 64:00:6a:25:80:ba e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection e1000e 0000:00:1f.6 eth0: MAC: 12, PHY: 12, PBA No: FFFFFF-0FF igb: Intel(R) Gigabit Ethernet Network Driver igb: Copyright (c) 2007-2014 Intel Corporation. Intel(R) 2.5G Ethernet Linux Driver Copyright(c) 2018 Intel Corporation. i40e: Intel(R) Ethernet Connection XL710 Network Driver i40e: Copyright (c) 2013 - 2019 Intel Corporation. usbcore: registered new interface driver asix IOAPIC[2]: Set IRTE entry (P:1 FPD:0 Dst_Mode:0 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:0 Avail:0 Vector:EF Dest:00000000 SID:F0F8 SQ:0 SVT:1) IOAPIC[0]: Preconfigured routing entry (2-18 -> IRQ 18 Level:1 ActiveLow:1) xhci_hcd 0000:00:14.0: xHCI Host Controller xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000001109810 xhci_hcd 0000:00:14.0: xHCI Host Controller xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.18 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: xHCI Host Controller usb usb1: Manufacturer: Linux 6.18.0-rc5-00236-g142f20971642 xhci-hcd usb usb1: SerialNumber: 0000:00:14.0 hub 1-0:1.0: USB hub found hub 1-0:1.0: 16 ports detected usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.18 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: xHCI Host Controller usb usb2: Manufacturer: Linux 6.18.0-rc5-00236-g142f20971642 xhci-hcd usb usb2: SerialNumber: 0000:00:14.0 hub 2-0:1.0: USB hub found hub 2-0:1.0: 10 ports detected tsc: Refined TSC clocksource calibration: 3192.004 MHz usbcore: registered new interface driver usbserial_generic clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2e02c8c3a19, max_idle_ns: 440795275133 ns usbserial: USB Serial support registered for generic clocksource: Switched to clocksource tsc i8042: PNP: No PS/2 controller found. mousedev: PS/2 mouse device common for all mice rtc_cmos 00:04: RTC can wake from S4 rtc_cmos 00:04: registered as rtc0 rtc_cmos 00:04: setting system clock to 2025-12-05T06:08:49 UTC (1764914929) rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram iTCO_vendor_support: vendor-support=0 intel_pstate: HWP enabled by BIOS intel_pstate: Intel P-state driver initializing intel_pstate: HWP enabled hid: raw HID events driver (C) Jiri Kosina usbcore: registered new interface driver usbhid usbhid: USB HID core driver drop_monitor: Initializing network drop monitor service Initializing XFRM netlink socket NET: Registered PF_INET6 protocol family Segment Routing with IPv6 In-situ OAM (IOAM) with IPv6 NET: Registered PF_PACKET protocol family 9pnet: Installing 9P2000 support mpls_gso: MPLS GSO support microcode: Current revision: 0x00000039 IPI shorthand broadcast: enabled ... APIC ID: 00000000 (0) ... APIC VERSION: 01060015 0000000000000000000000000000000000000000000000000000000000000000 0000000000000000000000000000000000000000000000000000000000000000 0000000000000000000000000000000000000000000000000000000000001000 number of MP IRQ sources: 15. number of IO-APIC #2 registers: 120. testing the IO APIC....................... IO APIC #2...... .... register #00: 02000000 ....... : physical APIC id: 02 ....... : Delivery Type: 0 ....... : LTS : 0 .... register #01: 00770020 ....... : max redirection entries: 77 ....... : PRQ implemented: 0 ....... : IO APIC version: 20 .... register #02: 00000000 ....... : arbitration: 00 .... IRQ redirection table: IOAPIC 0: pin00, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin01, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin02, enabled , edge , high, V(02), IRR(0), S(0), remapped, I(0001), Z(0) pin03, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin04, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin05, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin06, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin07, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin08, enabled , edge , high, V(08), IRR(0), S(0), remapped, I(0007), Z(0) pin09, enabled , level, high, V(09), IRR(0), S(0), remapped, I(0008), Z(0) pin0a, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin0b, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin0c, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin0d, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin0e, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin0f, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin10, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin11, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin12, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin13, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin14, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin15, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin16, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin17, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin18, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin19, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin1a, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin1b, disabled, edge , high, V(19), IRR(0), S(0), remapped, I(3212), Z(2) pin1c, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin1d, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin1e, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin1f, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin20, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin21, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin22, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin23, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin24, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin25, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin26, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin27, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin28, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin29, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin2a, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin2b, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin2c, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin2d, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin2e, disabled, edge , high, V(01), IRR(0), S(0), physical, D(0400), M(2) pin2f, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin30, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin31, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin32, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin33, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin34, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin35, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin36, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin37, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin38, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin39, disabled, edge , high, V(02), IRR(0), S(0), physical, D(0030), M(2) pin3a, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin3b, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin3c, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin3d, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin3e, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin3f, disabled, edge , high, V(40), IRR(0), S(0), physical, D(0058), M(2) pin40, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin41, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin42, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin43, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin44, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin45, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin46, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin47, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin48, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin49, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin4a, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin4b, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin4c, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin4d, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin4e, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin4f, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin50, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin51, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin52, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin53, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin54, disabled, edge , high, V(01), IRR(0), S(0), logical , D(0402), M(2) pin55, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin56, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin57, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin58, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin59, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin5a, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin5b, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin5c, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin5d, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin5e, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin5f, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin60, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin61, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin62, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin63, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin64, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin65, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin66, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin67, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0104), M(2) pin68, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin69, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin6a, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin6b, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin6c, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin6d, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin6e, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin6f, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin70, disabled, edge , high, V(00), IRR(0), S(0), physical, D(4824), M(2) pin71, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin72, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin73, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin74, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin75, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin76, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin77, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) IRQ to pin mappings: IRQ0 -> 0:2 IRQ1 -> 0:1 IRQ3 -> 0:3 IRQ4 -> 0:4 IRQ5 -> 0:5 IRQ6 -> 0:6 IRQ7 -> 0:7 IRQ8 -> 0:8 IRQ9 -> 0:9 IRQ10 -> 0:10 IRQ11 -> 0:11 IRQ12 -> 0:12 IRQ13 -> 0:13 IRQ14 -> 0:14 IRQ15 -> 0:15 IRQ16 -> 0:16 IRQ18 -> 0:18 IRQ19 -> 0:19 .................................... done. sched_clock: Marking stable (7612002468, 1055555516)->(8981710102, -314152118) registered taskstats version 1 Loading compiled-in X.509 certificates Loaded X.509 cert 'Build time autogenerated kernel key: 7b7e392bacb89e9ce70da7f090f19af5162f5472' Demotion targets for Node 0: null page_owner is disabled Key type .fscrypt registered Key type fscrypt-provisioning registered Key type big_key registered Key type encrypted registered ima: No TPM chip found, activating TPM-bypass! Loading compiled-in module X.509 certificates Loaded X.509 cert 'Build time autogenerated kernel key: 7b7e392bacb89e9ce70da7f090f19af5162f5472' ima: Allocated hash algorithm: sha256 ima: No architecture policies found evm: Initialising EVM extended attributes: evm: security.selinux evm: security.SMACK64 (disabled) evm: security.SMACK64EXEC (disabled) evm: security.SMACK64TRANSMUTE (disabled) evm: security.SMACK64MMAP (disabled) evm: security.apparmor (disabled) evm: security.ima evm: security.capability evm: HMAC attrs: 0x1 Running certificate verification RSA selftest Loaded X.509 cert 'Certificate verification self-testing key: f58703bb33ce1b73ee02eccdee5b8817518fe3db' Running certificate verification ECDSA selftest Freeing initrd memory: 970720K Loaded X.509 cert 'Certificate verification ECDSA self-testing key: 2900bcea1deb7bc8479a84a23d758efdfdd2b2d3' e1000e 0000:00:1f.6 eth0: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None Sending DHCP requests ...., OK IP-Config: Got DHCP answer from 192.168.3.1, my address is 192.168.3.93 IP-Config: Complete: device=eth0, hwaddr=64:00:6a:25:80:ba, ipaddr=192.168.3.93, mask=255.255.255.0, gw=192.168.3.200 host=lkp-skl-d02, domain=lkp.intel.com, nis-domain=(none) bootserver=192.168.3.200, rootserver=192.168.3.200, rootpath= nameserver0=192.168.3.200 clk: Disabling unused clocks PM: genpd: Disabling unused power domains Freeing unused decrypted memory: 2036K Freeing unused kernel image (initmem) memory: 7568K Write protecting the kernel read-only data: 67584k Freeing unused kernel image (text/rodata gap) memory: 1420K Freeing unused kernel image (rodata/data gap) memory: 1552K x86/mm: Checked W+X mappings: passed, no W+X pages found. x86/mm: Checking user space page tables x86/mm: Checked W+X mappings: passed, no W+X pages found. Run /init as init process with arguments: /init nokaslr with environment: HOME=/ TERM=linux RESULT_ROOT=/result/lkvs/rapl-client/lkp-skl-d02/debian-13-x86_64-20250902.cgz/x86_64-rhel-9.4-func/gcc-14/142f20971642be40507d3a0bc94e905e251db81a/0 branch=linux-review/Philipp-Stanner/dma-buf-dma-fence-Unify-return-codes-for-signalled-fences/20251125-184735 job=/lkp/jobs/scheduled/lkp-skl-d02/lkvs-rapl-client-debian-13-x86_64-20250902.cgz-142f20971642-20251204-4017965-mi6ow3-1.yaml user=lkp ARCH=x86_64 kconfig=x86_64-rhel-9.4-func commit=142f20971642be40507d3a0bc94e905e251db81a max_uptime=7200 LKP_SERVER=internal-lkp-server prompt_ramdisk=0 vga=normal ACPI: bus type drm_connector registered EDAC ie31200: No ECC support wmi_bus wmi_bus-PNP0C14:00: [Firmware Bug]: WQBC data block query control method not found EDAC ie31200: No ECC support intel_pmc_core INT33A1:00: initialized mei_me 0000:00:16.0: enabling device (0000 -> 0002) libata version 3.00 loaded. IOAPIC[2]: Set IRTE entry (P:1 FPD:0 Dst_Mode:0 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:0 Avail:0 Vector:EF Dest:00000000 SID:F0F8 SQ:0 SVT:1) IOAPIC[0]: Preconfigured routing entry (2-17 -> IRQ 17 Level:1 ActiveLow:1) input: PC Speaker as /devices/platform/pcspkr/input/input3 i801_smbus 0000:00:1f.4: SPD Write Disable is set ahci 0000:00:17.0: AHCI vers 0001.0301, 32 command slots, 6 Gbps, SATA mode ahci 0000:00:17.0: 4/4 ports implemented (port mask 0xf) ahci 0000:00:17.0: flags: 64bit ncq sntf pm led clo only pio slum part ems deso sadm sds apst i801_smbus 0000:00:1f.4: SMBus using PCI interrupt iTCO_wdt iTCO_wdt: Found a Intel PCH TCO device (Version=4, TCOBASE=0x0400) scsi host0: ahci i2c i2c-0: Successfully instantiated SPD at 0x50 scsi host1: ahci i2c i2c-0: Successfully instantiated SPD at 0x51 i2c i2c-0: Successfully instantiated SPD at 0x52 i2c i2c-0: Successfully instantiated SPD at 0x53 scsi host2: ahci RAPL PMU: hw unit of domain pp0-core 2^-14 Joules RAPL PMU: hw unit of domain package 2^-14 Joules RAPL PMU: hw unit of domain dram 2^-14 Joules RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.4) m - NFS client s[ 45.321822][ T203] ata4: SATA max UDMA/133 abar m2048@0xdf04b000 port 0xdf04b280 irq 129 lpm-pol 0 - /etc/rc.local [ 45.649784][ T214] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) Compatibility...[ 45.666414][ T219] ata2.00: Model 'INTEL SSDSC2KG960G8', rev 'XCV10110', applying quirks: zeroaftertrim ata2.00: ATA-10: INTEL SSDSC2KG960G8, XCV10110, max UDMA/133 ata2.00: 1875385008 sectors, multi 1: LBA48 NCQ (depth 32) Startin[ 45.692480][ T224] ata4: SATA link down (SStatus 4 SControl 300) nBSD Secure Shel[ 45.715159][ T214] ata1.00: NCQ Non-Data Log not supported ata1.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 32), AA Startin[ 45.731802][ T214] ata1.00: NCQ Non-Data Log not supported md-user-sessions[ 45.744542][ T41] scsi 0:0:0:0: Direct-Access ATA ST2000NM0033-9ZM SN06 PQ: 0 ANSI: 5 LKP: ttyS0: 241: current_version: 39, target_version: f0 ;1;39msystemd-us[ 45.818911][ T241] microcode: You should switch to early loading, if possible. LKP: ttyS0: 24[ 45.844919][ T241] x86/CPU: CPU features have changed after loading microcode, but might not take effect. 1: deploy intel [ 45.855887][ T241] x86/CPU: Please consider either early loading through initrd/built-in or a potential BIOS update. ucode LKP: ttyS0: 241: Kernel tests: Boot OK! LKP: ttyS0: 241: HOSTNAME lkp-skl-d02, MAC , kernel 6.18.0-rc5-00236-g142f20971642 1 i915 0000:00:02.0: [drm] Found skylake (device ID 1912) integrated display version 9.00 stepping G0 i915 0000:00:02.0: vgaarb: deactivate vga console Console: switching to colour dummy device 80x25 input: Dell WMI hotkeys as /devices/platform/PNP0C14:00/wmi_bus/wmi_bus-PNP0C14:00/9DBB5994-A997-11DA-B012-B622A1EF5492-2/input/input4 scsi 0:0:0:0: Attached scsi generic sg0 type 0 scsi 1:0:0:0: Attached scsi generic sg1 type 0 ata2.00: Enabling discard_zeroes_data sd 0:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) sd 1:0:0:0: [sda] 1875385008 512-byte logical blocks: (960 GB/894 GiB) sd 1:0:0:0: [sda] 4096-byte physical blocks sd 0:0:0:0: [sdb] Write Protect is off sd 0:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sdb] Preferred minimum I/O size 512 bytes sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA i915 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=io+mem:owns=io+mem sd 1:0:0:0: [sda] Preferred minimum I/O size 4096 bytes i915 0000:00:02.0: Direct firmware load for i915/skl_dmc_ver1_27.bin failed with error -2 i915 0000:00:02.0: [drm] Failed to load DMC firmware i915/skl_dmc_ver1_27.bin (-ENOENT). Disabling runtime power management. i915 0000:00:02.0: [drm] DMC firmware homepage: https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git Oops: general protection fault, probably for non-canonical address 0xdffffc01544551ba: 0000 [#1] SMP KASAN PTI ------------[ cut here ]------------ KASAN: probably user-memory-access in range [0x0000000aa22a8dd0-0x0000000aa22a8dd7] CPU: 3 UID: 0 PID: 12 Comm: kworker/u16:0 Tainted: G S I 6.18.0-rc5-00236-g142f20971642 #1 PREEMPT(voluntary) Fence 0000:00:02.0:[i915]:9:2 released with pending signals! Tainted: [S]=CPU_OUT_OF_SPEC, [I]=FIRMWARE_WORKAROUND Hardware name: Dell Inc. OptiPlex 7040/0Y7WYT, BIOS 1.1.1 10/07/2015 Workqueue: i915 __i915_gem_free_work [i915] WARNING: CPU: 0 PID: 179 at drivers/dma-buf/dma-fence.c:555 dma_fence_release+0x263/0x370 RIP: 0010:__list_add_valid_or_report+0x36/0x130 Code: 8b 98 fe 48 89 d3 48 85 d2 0f 84 af 8b 98 fe 4c 8d 62 08 48 89 fd 49 89 f5 48 b8 00 00 00 00 00 fc ff df 4c 89 e2 48 c1 ea 03 <80> 3c 02 00 0f 85 b7 00 00 00 4c 39 6b 08 75 43 48 b8 00 00 00 00 Modules linked in: RSP: 0018:ffffc9000010fac8 EFLAGS: 00010003 RAX: dffffc0000000000 RBX: 0000000aa22a8dcf RCX: ffffffff82f5859d platform_profile RDX: 00000001544551ba RSI: ffff88884fde5c90 RDI: ffffc9000010fb50 RBP: ffffc9000010fb50 R08: 0000000000000000 R09: ffffed1109fbcb96 R10: ffff88884fde5cb7 R11: fefefefefefefeff R12: 0000000aa22a8dd7 sd_mod R13: ffff88884fde5c90 R14: ffff88884fde5c90 R15: 0000000aa22a8dcf FS: 0000000000000000(0000) GS:ffff888848e3e000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 intel_rapl_common CR2: 00007f3bc83ae000 CR3: 0000000868388002 CR4: 00000000003726f0 Call Trace: snd_hda_core dma_fence_default_wait+0x1b5/0x6d0 x86_pkg_temp_thermal ? __pfx_dma_fence_default_wait+0x10/0x10 intel_powerclamp ? __pfx_dma_fence_default_wait_cb+0x10/0x10 ? __pfx__raw_spin_lock_irqsave+0x10/0x10 coretemp ? i915_vma_resource_fence_notify+0x3e/0x270 [i915] sg dma_fence_wait_timeout+0x231/0x2a0 snd_intel_dspcfg __i915_vma_evict+0x857/0xe60 [i915] dell_wmi __i915_vma_unbind+0x11a/0x170 [i915] snd_intel_sdw_acpi i915_vma_destroy+0x244/0x2e0 [i915] snd_hwdep __i915_gem_object_pages_fini+0xa4/0x590 [i915] kvm_intel i915_gem_flush_free_objects+0xe5/0x140 [i915] dell_smbios process_one_work+0x668/0xec0 i915(+) worker_thread+0x629/0x10a0 kvm ? __pfx_worker_thread+0x10/0x10 rfkill kthread+0x39b/0x750 ? __pfx_kthread+0x10/0x10 snd_soc_core ? __pfx__raw_spin_lock_irq+0x10/0x10 dcdbas ? __pfx_kthread+0x10/0x10 ? __pfx_kthread+0x10/0x10 irqbypass ret_from_fork+0x1c0/0x260 snd_compress ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 intel_gtt Modules linked in: platform_profile sd_mod intel_rapl_common snd_hda_core ghash_clmulni_intel x86_pkg_temp_thermal intel_powerclamp coretemp sg snd_intel_dspcfg dell_wmi_descriptor dell_wmi snd_intel_sdw_acpi snd_hwdep snd_pcm kvm_intel dell_smbios i915(+) kvm rfkill wmi_bmof snd_soc_core dcdbas irqbypass snd_compress intel_gtt ghash_clmulni_intel rapl dell_wmi_descriptor snd_pcm wmi_bmof rapl sparse_keymap sparse_keymap drm_buddy snd_timer intel_cstate mei_wdt dell_smm_hwmon binfmt_misc drm_buddy snd ttm soundcore i2c_i801 pcspkr snd_timer intel_uncore drm_display_helper i2c_smbus ahci intel_cstate cec libahci drm_client_lib drm_kms_helper mei_me mei_wdt libata intel_pmc_core video mei pmt_telemetry dell_smm_hwmon pmt_discovery pmt_class intel_pch_thermal intel_pmc_ssram_telemetry binfmt_misc intel_vsec wmi acpi_pad fuse snd drm nfnetlink ---[ end trace 0000000000000000 ]--- ttm RIP: 0010:__list_add_valid_or_report+0x36/0x130 soundcore Code: 8b 98 fe 48 89 d3 48 85 d2 0f 84 af 8b 98 fe 4c 8d 62 08 48 89 fd 49 89 f5 48 b8 00 00 00 00 00 fc ff df 4c 89 e2 48 c1 ea 03 <80> 3c 02 00 0f 85 b7 00 00 00 4c 39 6b 08 75 43 48 b8 00 00 00 00 RSP: 0018:ffffc9000010fac8 EFLAGS: 00010003 i2c_i801 RAX: dffffc0000000000 RBX: 0000000aa22a8dcf RCX: ffffffff82f5859d RDX: 00000001544551ba RSI: ffff88884fde5c90 RDI: ffffc9000010fb50 pcspkr RBP: ffffc9000010fb50 R08: 0000000000000000 R09: ffffed1109fbcb96 R10: ffff88884fde5cb7 R11: fefefefefefefeff R12: 0000000aa22a8dd7 intel_uncore R13: ffff88884fde5c90 R14: ffff88884fde5c90 R15: 0000000aa22a8dcf FS: 0000000000000000(0000) GS:ffff888848e3e000(0000) knlGS:0000000000000000 drm_display_helper CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f3bc83ae000 CR3: 0000000868388002 CR4: 00000000003726f0 Kernel panic - not syncing: Fatal exception Kernel Offset: disabled early console in extract_kernel input_data: 0x00000008700a32cc input_len: 0x0000000001ddd990 output: 0x000000086a800000 output_len: 0x00000000075ea424 kernel_total_size: 0x0000000006a30000 needed_size: 0x0000000007600000 trampoline_32bit: 0x0000000000000000 KASLR disabled: 'nokaslr' on cmdline.