Decompressing Linux... No EFI environment detected. Parsing ELF... No relocation needed... done. Booting the kernel (entry_offset: 0x0000000005387f60). Linux version 7.0.0-rc2-00273-g5e4b47fd150c (kbuild@2cbc33a25198) (gcc-14 (Debian 14.2.0-19) 14.2.0, GNU ld (GNU Binutils for Debian) 2.44) #1 SMP PREEMPT_DYNAMIC Thu Mar 12 21:49:36 CST 2026 Command line: ip=::::lkp-skl-d02::dhcp root=/dev/ram0 RESULT_ROOT=/result/perf-stat-tests/defaults/lkp-skl-d02/debian-13-x86_64-20250902.cgz/x86_64-rhel-9.4-bpf/gcc-14/5e4b47fd150c2ab74396945eae895ed419505daa/0 BOOT_IMAGE=/pkg/linux/x86_64-rhel-9.4-bpf/gcc-14/5e4b47fd150c2ab74396945eae895ed419505daa/vmlinuz-7.0.0-rc2-00273-g5e4b47fd150c branch=matttbe-net-next/gh-issue-617-stalls-starting-vsock job=/lkp/jobs/scheduled/lkp-skl-d02/perf-stat-tests-defaults-debian-13-x86_64-20250902.cgz-5e4b47fd150c-20260312-3836505-b2g5sk-5.yaml user=lkp ARCH=x86_64 kconfig=x86_64-rhel-9.4-bpf commit=5e4b47fd150c2ab74396945eae895ed419505daa intremap=posted_msi max_uptime=7200 LKP_SERVER=internal-lkp-server nokaslr selinux=0 debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 net.ifnames=0 printk.devkmsg=on panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 drbd.minor_count=8 systemd.log_level=err ignore_loglevel console=tty0 earlyprintk=ttyS0,115200 console=ttyS0,1 x86/CPU: Running old microcode BIOS-provided physical RAM map: BIOS-e820: [gap 0x0000000000000000-0x00000000000000ff] BIOS-e820: [mem 0x0000000000000100-0x000000000009c7ff] System RAM BIOS-e820: [mem 0x000000000009c800-0x000000000009ffff] device reserved BIOS-e820: [gap 0x00000000000a0000-0x00000000000dffff] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] device reserved BIOS-e820: [mem 0x0000000000100000-0x0000000077b40fff] System RAM BIOS-e820: [mem 0x0000000077b41000-0x0000000077b41fff] ACPI NVS BIOS-e820: [mem 0x0000000077b42000-0x0000000077b6bfff] device reserved BIOS-e820: [mem 0x0000000077b6c000-0x0000000077bbdfff] System RAM BIOS-e820: [mem 0x0000000077bbe000-0x00000000783befff] device reserved BIOS-e820: [mem 0x00000000783bf000-0x0000000086f56fff] System RAM BIOS-e820: [mem 0x0000000086f57000-0x00000000872bcfff] device reserved BIOS-e820: [mem 0x00000000872bd000-0x0000000087309fff] ACPI data BIOS-e820: [mem 0x000000008730a000-0x0000000087abefff] ACPI NVS BIOS-e820: [mem 0x0000000087abf000-0x0000000087ffefff] device reserved BIOS-e820: [mem 0x0000000087fff000-0x0000000087ffffff] System RAM BIOS-e820: [gap 0x0000000088000000-0x00000000dfffffff] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] device reserved BIOS-e820: [gap 0x00000000f0000000-0x00000000fdffffff] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] device reserved BIOS-e820: [gap 0x00000000fe011000-0x00000000febfffff] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] device reserved BIOS-e820: [gap 0x00000000fec01000-0x00000000fedfffff] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] device reserved BIOS-e820: [gap 0x00000000fee01000-0x00000000feffffff] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] device reserved BIOS-e820: [mem 0x0000000100000000-0x0000000871ffffff] System RAM printk: debug: ignoring loglevel setting. printk: legacy bootconsole [earlyser0] enabled NX (Execute Disable) protection: active APIC: Static calls initialized SMBIOS 2.8 present. DMI: Dell Inc. OptiPlex 7040/0Y7WYT, BIOS 1.1.1 10/07/2015 DMI: Memory slots populated: 4/4 tsc: Detected 3200.000 MHz processor tsc: Detected 3199.980 MHz TSC e820: update [mem 0x00000000-0x00000fff] System RAM ==> device reserved e820: remove [mem 0x000a0000-0x000fffff] System RAM last_pfn = 0x872000 max_arch_pfn = 0x400000000 MTRR map: 4 entries (3 fixed + 1 variable; max 23), built from 10 variable MTRRs x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT last_pfn = 0x88000 max_arch_pfn = 0x400000000 Scan for SMP in [mem 0x00000000-0x000003ff] Scan for SMP in [mem 0x0009fc00-0x0009ffff] Scan for SMP in [mem 0x000f0000-0x000fffff] found SMP MP-table at [mem 0x000fcde0-0x000fcdef] mpc: fcbb0-fcd5c Using GB pages for direct mapping RAMDISK: [mem 0x7db677000-0x869ffffff] ACPI: Early table checksum verification disabled ACPI: RSDP 0x00000000000F05B0 000024 (v02 DELL ) ACPI: XSDT 0x00000000872DD0A0 0000C4 (v01 DELL CBX3 01072009 AMI 00010013) ACPI: FACP 0x00000000872FE7C0 00010C (v05 DELL CBX3 01072009 AMI 00010013) ACPI: DSDT 0x00000000872DD1F8 0215C8 (v02 DELL CBX3 01072009 INTL 20120913) ACPI: FACS 0x0000000087ABEF80 000040 ACPI: APIC 0x00000000872FE8D0 000084 (v03 DELL CBX3 01072009 AMI 00010013) ACPI: FPDT 0x00000000872FE958 000044 (v01 DELL CBX3 01072009 AMI 00010013) ACPI: FIDT 0x00000000872FE9A0 00009C (v01 DELL CBX3 01072009 AMI 00010013) ACPI: MCFG 0x00000000872FEA40 00003C (v01 DELL CBX3 01072009 MSFT 00000097) ACPI: HPET 0x00000000872FEA80 000038 (v01 DELL CBX3 01072009 AMI. 0005000B) ACPI: SSDT 0x00000000872FEAB8 00036D (v01 SataRe SataTabl 00001000 INTL 20120913) ACPI: SSDT 0x00000000872FEE28 0053B2 (v02 SaSsdt SaSsdt 00003000 INTL 20120913) ACPI: UEFI 0x00000000873041E0 000042 (v01 00000000 00000000) ACPI: LPIT 0x0000000087304228 000094 (v01 INTEL SKL 00000000 MSFT 0000005F) ACPI: SSDT 0x00000000873042C0 000248 (v02 INTEL sensrhub 00000000 INTL 20120913) ACPI: SSDT 0x0000000087304508 002BAE (v02 INTEL PtidDevc 00001000 INTL 20120913) ACPI: SSDT 0x00000000873070B8 000C45 (v02 INTEL Ther_Rvp 00001000 INTL 20120913) ACPI: DBGP 0x0000000087307D00 000034 (v01 INTEL 00000000 MSFT 0000005F) ACPI: DBG2 0x0000000087307D38 000054 (v00 INTEL 00000000 MSFT 0000005F) ACPI: SSDT 0x0000000087307D90 000613 (v02 INTEL DELL__MT 00000000 INTL 20120913) ACPI: SSDT 0x00000000873083A8 000E58 (v02 CpuRef CpuSsdt 00003000 INTL 20120913) ACPI: SLIC 0x0000000087309200 000176 (v03 DELL CBX3 01072009 MSFT 00010013) ACPI: DMAR 0x0000000087309378 0000A8 (v01 INTEL SKL 00000001 INTL 00000001) ACPI: ASF! 0x0000000087309420 0000A5 (v32 INTEL HCG 00000001 TFSM 000F4240) ACPI: Reserving FACP table memory at [mem 0x872fe7c0-0x872fe8cb] ACPI: Reserving DSDT table memory at [mem 0x872dd1f8-0x872fe7bf] ACPI: Reserving FACS table memory at [mem 0x87abef80-0x87abefbf] ACPI: Reserving APIC table memory at [mem 0x872fe8d0-0x872fe953] ACPI: Reserving FPDT table memory at [mem 0x872fe958-0x872fe99b] ACPI: Reserving FIDT table memory at [mem 0x872fe9a0-0x872fea3b] ACPI: Reserving MCFG table memory at [mem 0x872fea40-0x872fea7b] ACPI: Reserving HPET table memory at [mem 0x872fea80-0x872feab7] ACPI: Reserving SSDT table memory at [mem 0x872feab8-0x872fee24] ACPI: Reserving SSDT table memory at [mem 0x872fee28-0x873041d9] ACPI: Reserving UEFI table memory at [mem 0x873041e0-0x87304221] ACPI: Reserving LPIT table memory at [mem 0x87304228-0x873042bb] ACPI: Reserving SSDT table memory at [mem 0x873042c0-0x87304507] ACPI: Reserving SSDT table memory at [mem 0x87304508-0x873070b5] ACPI: Reserving SSDT table memory at [mem 0x873070b8-0x87307cfc] ACPI: Reserving DBGP table memory at [mem 0x87307d00-0x87307d33] ACPI: Reserving DBG2 table memory at [mem 0x87307d38-0x87307d8b] ACPI: Reserving SSDT table memory at [mem 0x87307d90-0x873083a2] ACPI: Reserving SSDT table memory at [mem 0x873083a8-0x873091ff] ACPI: Reserving SLIC table memory at [mem 0x87309200-0x87309375] ACPI: Reserving DMAR table memory at [mem 0x87309378-0x8730941f] ACPI: Reserving ASF! table memory at [mem 0x87309420-0x873094c4] Mapped APIC to ffffffffff5fc000 ( fee00000) No NUMA configuration found Faking a node at [mem 0x0000000000000000-0x0000000871ffffff] NODE_DATA(0) allocated [mem 0x871fd4a80-0x871ffffff] KernelAddressSanitizer initialized (generic) Reserving Intel graphics memory at [mem 0x8a000000-0x8bffffff] ACPI: PM-Timer IO Port: 0x1808 ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 2, APIC INT 02 ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 2, APIC INT 09 Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 2, APIC INT 01 Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 2, APIC INT 03 Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 2, APIC INT 04 Int: type 0, pol 0, trig 0, bus 00, IRQ 05, APIC ID 2, APIC INT 05 Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 2, APIC INT 06 Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 2, APIC INT 07 Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 2, APIC INT 08 Int: type 0, pol 0, trig 0, bus 00, IRQ 0a, APIC ID 2, APIC INT 0a Int: type 0, pol 0, trig 0, bus 00, IRQ 0b, APIC ID 2, APIC INT 0b Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 2, APIC INT 0c Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 2, APIC INT 0d Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 2, APIC INT 0e Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 2, APIC INT 0f ACPI: Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8086a701 base: 0xfed00000 [Firmware Bug]: TSC_DEADLINE disabled due to Errata; please update microcode to version: 0xb2 (or later) CPU topo: Max. logical packages: 1 CPU topo: Max. logical dies: 1 CPU topo: Max. dies per package: 1 CPU topo: Max. threads per core: 1 CPU topo: Num. cores per package: 4 CPU topo: Num. threads per package: 4 CPU topo: Allowing 4 present CPUs plus 0 hotplug CPUs mapped IOAPIC to ffffffffff5fb000 (fec00000) PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] PM: hibernation: Registered nosave memory: [mem 0x0009c000-0x000fffff] PM: hibernation: Registered nosave memory: [mem 0x77b41000-0x77b6bfff] PM: hibernation: Registered nosave memory: [mem 0x77bbe000-0x783befff] PM: hibernation: Registered nosave memory: [mem 0x86f57000-0x87ffefff] PM: hibernation: Registered nosave memory: [mem 0x88000000-0xffffffff] [gap 0x8c000000-0xdfffffff] available for PCI devices Booting paravirtualized kernel on bare hardware clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns Section 243 and 270 (node 0) have a circular dependency on usemap and pgdat allocations Zone ranges: DMA [mem 0x0000000000001000-0x0000000000ffffff] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] Normal [mem 0x0000000100000000-0x0000000871ffffff] Device empty Movable zone start for each node Early memory node ranges node 0: [mem 0x0000000000001000-0x000000000009bfff] node 0: [mem 0x0000000000100000-0x0000000077b40fff] node 0: [mem 0x0000000077b6c000-0x0000000077bbdfff] node 0: [mem 0x00000000783bf000-0x0000000086f56fff] node 0: [mem 0x0000000087fff000-0x0000000087ffffff] node 0: [mem 0x0000000100000000-0x0000000871ffffff] Initmem setup node 0 [mem 0x0000000000001000-0x0000000871ffffff] On node 0, zone DMA: 1 pages in unavailable ranges On node 0, zone DMA: 100 pages in unavailable ranges On node 0, zone DMA32: 43 pages in unavailable ranges On node 0, zone DMA32: 2049 pages in unavailable ranges On node 0, zone DMA32: 4264 pages in unavailable ranges On node 0, zone Normal: 24576 pages in unavailable ranges setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 percpu: Embedded 81 pages/cpu s294912 r8192 d28672 u524288 pcpu-alloc: s294912 r8192 d28672 u524288 alloc=1*2097152 pcpu-alloc: [0] 0 1 2 3 Kernel command line: ip=::::lkp-skl-d02::dhcp root=/dev/ram0 RESULT_ROOT=/result/perf-stat-tests/defaults/lkp-skl-d02/debian-13-x86_64-20250902.cgz/x86_64-rhel-9.4-bpf/gcc-14/5e4b47fd150c2ab74396945eae895ed419505daa/0 BOOT_IMAGE=/pkg/linux/x86_64-rhel-9.4-bpf/gcc-14/5e4b47fd150c2ab74396945eae895ed419505daa/vmlinuz-7.0.0-rc2-00273-g5e4b47fd150c branch=matttbe-net-next/gh-issue-617-stalls-starting-vsock job=/lkp/jobs/scheduled/lkp-skl-d02/perf-stat-tests-defaults-debian-13-x86_64-20250902.cgz-5e4b47fd150c-20260312-3836505-b2g5sk-5.yaml user=lkp ARCH=x86_64 kconfig=x86_64-rhel-9.4-bpf commit=5e4b47fd150c2ab74396945eae895ed419505daa intremap=posted_msi max_uptime=7200 LKP_SERVER=internal-lkp-server nokaslr selinux=0 debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 net.ifnames=0 printk.devkmsg=on panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 drbd.minor_count=8 systemd.log_level=err ignore_loglevel console=tty0 earlyprintk=ttyS0,115200 \ Kernel command line: console=ttyS0,115200 vga=normal rw sysrq: sysrq always enabled. Unknown kernel command line parameters "nokaslr RESULT_ROOT=/result/perf-stat-tests/defaults/lkp-skl-d02/debian-13-x86_64-20250902.cgz/x86_64-rhel-9.4-bpf/gcc-14/5e4b47fd150c2ab74396945eae895ed419505daa/0 branch=matttbe-net-next/gh-issue-617-stalls-starting-vsock job=/lkp/jobs/scheduled/lkp-skl-d02/perf-stat-tests-defaults-debian-13-x86_64-20250902.cgz-5e4b47fd150c-20260312-3836505-b2g5sk-5.yaml user=lkp ARCH=x86_64 kconfig=x86_64-rhel-9.4-bpf commit=5e4b47fd150c2ab74396945eae895ed419505daa max_uptime=7200 LKP_SERVER=internal-lkp-server load_ramdisk=2 prompt_ramdisk=0 vga=normal", will be passed to user space. random: crng init done printk: log buffer data + meta data: 2097152 + 8912896 = 11010048 bytes Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear) Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) software IO TLB: area num 4. Fallback order for Node 0: 0 Built 1 zonelists, mobility grouping on. Total pages: 8357575 Policy zone: Normal mem auto-init: stack:off, heap alloc:off, heap free:off stackdepot: allocating hash table via alloc_large_system_hash stackdepot hash table entries: 1048576 (order: 12, 16777216 bytes, linear) stackdepot: allocating space for 8192 stack pools via memblock SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 Kernel/User page tables isolation: enabled Poking KASLR using RDRAND RDTSC... ftrace: allocating 59073 entries in 232 pages ftrace: allocated 232 pages with 4 groups Dynamic Preempt: full Running RCU self tests Running RCU synchronous self tests rcu: Preemptible hierarchical RCU implementation. rcu: RCU lockdep checking is enabled. rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4. RCU CPU stall warnings timeout set to 100 (rcu_cpu_stall_timeout). Trampoline variant of Tasks RCU enabled. Rude variant of Tasks RCU enabled. Tracing variant of Tasks RCU enabled. rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 Running RCU synchronous self tests RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. NR_IRQS: 524544, nr_irqs: 1024, preallocated irqs: 16 rcu: srcu_init: Setting srcu_struct sizes based on contention. Console: colour VGA+ 80x25 printk: legacy console [tty0] enabled printk: legacy console [ttyS0] enabled printk: legacy console [ttyS0] enabled printk: legacy bootconsole [earlyser0] disabled printk: legacy bootconsole [earlyser0] disabled Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar ... MAX_LOCKDEP_SUBCLASSES: 8 ... MAX_LOCK_DEPTH: 48 ... MAX_LOCKDEP_KEYS: 8192 ... CLASSHASH_SIZE: 4096 ... MAX_LOCKDEP_ENTRIES: 32768 ... MAX_LOCKDEP_CHAINS: 65536 ... CHAINHASH_SIZE: 32768 memory used by lock dependency info: 6429 kB memory used for stack traces: 4224 kB per task-struct memory footprint: 1920 bytes ACPI: Core revision 20251212 clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns APIC: Switch to symmetric I/O mode setup DMAR: Host address width 39 DMAR: DRHD base: 0x000000fed90000 flags: 0x0 DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e3ff0505e DMAR: DRHD base: 0x000000fed91000 flags: 0x1 DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da DMAR: RMRR base: 0x0000008715f000 end: 0x0000008717efff DMAR: RMRR base: 0x00000089800000 end: 0x0000008bffffff DMAR: [Firmware Bug]: No firmware reserved region can cover this RMRR [0x0000000089800000-0x000000008bffffff], contact BIOS vendor for fixes DMAR: [Firmware Bug]: Your BIOS is broken; bad RMRR [0x0000000089800000-0x000000008bffffff] BIOS vendor: Dell Inc.; Ver: 1.1.1; Product Version: DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1 DMAR-IR: HPET id 0 under DRHD base 0xfed91000 DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit. DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting. DMAR-IR: IRQ remapping was enabled on dmar0 but we are not in kdump mode DMAR-IR: Enabled IRQ remapping in xapic mode x2apic: IRQ remapping doesn't support X2APIC mode Masked ExtINT on CPU#0 ENABLING IO-APIC IRQs Init IO_APIC IRQs apic 2 pin 0 not connected IOAPIC[2]: Set IRTE entry (P:1 FPD:0 Dst_Mode:0 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:0 Avail:0 Vector:EF Dest:00000000 SID:F0F8 SQ:0 SVT:1) IOAPIC[0]: Preconfigured routing entry (2-1 -> IRQ 1 Level:0 ActiveLow:0) IOAPIC[2]: Set IRTE entry (P:1 FPD:0 Dst_Mode:0 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:0 Avail:0 Vector:30 Dest:00000000 SID:F0F8 SQ:0 SVT:1) IOAPIC[0]: Preconfigured routing entry (2-2 -> IRQ 0 Level:0 ActiveLow:0) IOAPIC[2]: Set IRTE entry (P:1 FPD:0 Dst_Mode:0 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:0 Avail:0 Vector:EF Dest:00000000 SID:F0F8 SQ:0 SVT:1) IOAPIC[0]: Preconfigured routing entry (2-3 -> IRQ 3 Level:0 ActiveLow:0) IOAPIC[2]: Set IRTE entry (P:1 FPD:0 Dst_Mode:0 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:0 Avail:0 Vector:EF Dest:00000000 SID:F0F8 SQ:0 SVT:1) IOAPIC[0]: Preconfigured routing entry (2-4 -> IRQ 4 Level:0 ActiveLow:0) IOAPIC[2]: Set IRTE entry (P:1 FPD:0 Dst_Mode:0 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:0 Avail:0 Vector:EF Dest:00000000 SID:F0F8 SQ:0 SVT:1) IOAPIC[0]: Preconfigured routing entry (2-5 -> IRQ 5 Level:0 ActiveLow:0) IOAPIC[2]: Set IRTE entry (P:1 FPD:0 Dst_Mode:0 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:0 Avail:0 Vector:EF Dest:00000000 SID:F0F8 SQ:0 SVT:1) IOAPIC[0]: Preconfigured routing entry (2-6 -> IRQ 6 Level:0 ActiveLow:0) IOAPIC[2]: Set IRTE entry (P:1 FPD:0 Dst_Mode:0 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:0 Avail:0 Vector:EF Dest:00000000 SID:F0F8 SQ:0 SVT:1) IOAPIC[0]: Preconfigured routing entry (2-7 -> IRQ 7 Level:0 ActiveLow:0) IOAPIC[2]: Set IRTE entry (P:1 FPD:0 Dst_Mode:0 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:0 Avail:0 Vector:EF Dest:00000000 SID:F0F8 SQ:0 SVT:1) IOAPIC[0]: Preconfigured routing entry (2-8 -> IRQ 8 Level:0 ActiveLow:0) IOAPIC[2]: Set IRTE entry (P:1 FPD:0 Dst_Mode:0 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:0 Avail:0 Vector:EF Dest:00000000 SID:F0F8 SQ:0 SVT:1) IOAPIC[0]: Preconfigured routing entry (2-9 -> IRQ 9 Level:1 ActiveLow:0) IOAPIC[2]: Set IRTE entry (P:1 FPD:0 Dst_Mode:0 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:0 Avail:0 Vector:EF Dest:00000000 SID:F0F8 SQ:0 SVT:1) IOAPIC[0]: Preconfigured routing entry (2-10 -> IRQ 10 Level:0 ActiveLow:0) IOAPIC[2]: Set IRTE entry (P:1 FPD:0 Dst_Mode:0 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:0 Avail:0 Vector:EF Dest:00000000 SID:F0F8 SQ:0 SVT:1) IOAPIC[0]: Preconfigured routing entry (2-11 -> IRQ 11 Level:0 ActiveLow:0) IOAPIC[2]: Set IRTE entry (P:1 FPD:0 Dst_Mode:0 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:0 Avail:0 Vector:EF Dest:00000000 SID:F0F8 SQ:0 SVT:1) IOAPIC[0]: Preconfigured routing entry (2-12 -> IRQ 12 Level:0 ActiveLow:0) IOAPIC[2]: Set IRTE entry (P:1 FPD:0 Dst_Mode:0 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:0 Avail:0 Vector:EF Dest:00000000 SID:F0F8 SQ:0 SVT:1) IOAPIC[0]: Preconfigured routing entry (2-13 -> IRQ 13 Level:0 ActiveLow:0) IOAPIC[2]: Set IRTE entry (P:1 FPD:0 Dst_Mode:0 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:0 Avail:0 Vector:EF Dest:00000000 SID:F0F8 SQ:0 SVT:1) IOAPIC[0]: Preconfigured routing entry (2-14 -> IRQ 14 Level:0 ActiveLow:0) IOAPIC[2]: Set IRTE entry (P:1 FPD:0 Dst_Mode:0 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:0 Avail:0 Vector:EF Dest:00000000 SID:F0F8 SQ:0 SVT:1) IOAPIC[0]: Preconfigured routing entry (2-15 -> IRQ 15 Level:0 ActiveLow:0) apic 2 pin 16 not connected apic 2 pin 17 not connected apic 2 pin 18 not connected apic 2 pin 19 not connected apic 2 pin 20 not connected apic 2 pin 21 not connected apic 2 pin 22 not connected apic 2 pin 23 not connected apic 2 pin 24 not connected apic 2 pin 25 not connected apic 2 pin 26 not connected apic 2 pin 27 not connected apic 2 pin 28 not connected apic 2 pin 29 not connected apic 2 pin 30 not connected apic 2 pin 31 not connected apic 2 pin 32 not connected apic 2 pin 33 not connected apic 2 pin 34 not connected apic 2 pin 35 not connected apic 2 pin 36 not connected apic 2 pin 37 not connected apic 2 pin 38 not connected apic 2 pin 39 not connected apic 2 pin 40 not connected apic 2 pin 41 not connected apic 2 pin 42 not connected apic 2 pin 43 not connected apic 2 pin 44 not connected apic 2 pin 45 not connected apic 2 pin 46 not connected apic 2 pin 47 not connected apic 2 pin 48 not connected apic 2 pin 49 not connected apic 2 pin 50 not connected apic 2 pin 51 not connected apic 2 pin 52 not connected apic 2 pin 53 not connected apic 2 pin 54 not connected apic 2 pin 55 not connected apic 2 pin 56 not connected apic 2 pin 57 not connected apic 2 pin 58 not connected apic 2 pin 59 not connected apic 2 pin 60 not connected apic 2 pin 61 not connected apic 2 pin 62 not connected apic 2 pin 63 not connected apic 2 pin 64 not connected apic 2 pin 65 not connected apic 2 pin 66 not connected apic 2 pin 67 not connected apic 2 pin 68 not connected apic 2 pin 69 not connected apic 2 pin 70 not connected apic 2 pin 71 not connected apic 2 pin 72 not connected apic 2 pin 73 not connected apic 2 pin 74 not connected apic 2 pin 75 not connected apic 2 pin 76 not connected apic 2 pin 77 not connected apic 2 pin 78 not connected apic 2 pin 79 not connected apic 2 pin 80 not connected apic 2 pin 81 not connected apic 2 pin 82 not connected apic 2 pin 83 not connected apic 2 pin 84 not connected apic 2 pin 85 not connected apic 2 pin 86 not connected apic 2 pin 87 not connected apic 2 pin 88 not connected apic 2 pin 89 not connected apic 2 pin 90 not connected apic 2 pin 91 not connected apic 2 pin 92 not connected apic 2 pin 93 not connected apic 2 pin 94 not connected apic 2 pin 95 not connected apic 2 pin 96 not connected apic 2 pin 97 not connected apic 2 pin 98 not connected apic 2 pin 99 not connected apic 2 pin 100 not connected apic 2 pin 101 not connected apic 2 pin 102 not connected apic 2 pin 103 not connected apic 2 pin 104 not connected apic 2 pin 105 not connected apic 2 pin 106 not connected apic 2 pin 107 not connected apic 2 pin 108 not connected apic 2 pin 109 not connected apic 2 pin 110 not connected apic 2 pin 111 not connected apic 2 pin 112 not connected apic 2 pin 113 not connected apic 2 pin 114 not connected apic 2 pin 115 not connected apic 2 pin 116 not connected apic 2 pin 117 not connected apic 2 pin 118 not connected apic 2 pin 119 not connected ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2e2036ff8d5, max_idle_ns: 440795275316 ns Calibrating delay loop (skipped), value calculated using timer frequency.. 6399.96 BogoMIPS (lpj=3199980) CPU0: Thermal monitoring enabled (TM1) Last level iTLB entries: 4KB 128, 2MB 8, 4MB 8 Last level dTLB entries: 4KB 64, 2MB 32, 4MB 32, 1GB 4 process: using mwait in idle threads mitigations: Enabled attack vectors: user_kernel, user_user, guest_host, guest_guest, SMT mitigations: auto Speculative Store Bypass: Vulnerable SRBDS: Vulnerable: No microcode Spectre V2 : Mitigation: Retpolines RETBleed: Vulnerable MDS: Vulnerable: Clear CPU buffers attempted, no microcode TAA: Vulnerable: Clear CPU buffers attempted, no microcode MMIO Stale Data: Vulnerable: Clear CPU buffers attempted, no microcode VMSCAPE: Vulnerable Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization Spectre V2 : Spectre v2 / SpectreRSB: Filling RSB on context switch and VMEXIT GDS: Vulnerable: No microcode x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers' x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR' x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64 x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64 x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format. Freeing SMP alternatives memory: 52K pid_max: default: 32768 minimum: 301 Yama: becoming mindful. LSM support for eBPF active Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) VFS: Finished mounting rootfs on nullfs Running RCU synchronous self tests Running RCU synchronous self tests lapic timer already calibrated 24060 smpboot: CPU0: Intel(R) Core(TM) i5-6500 CPU @ 3.20GHz (family: 0x6, model: 0x5e, stepping: 0x3) Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver. ... version: 4 ... bit width: 48 ... generic counters: 8 ... generic bitmap: 00000000000000ff ... fixed-purpose counters: 3 ... fixed-purpose bitmap: 0000000000000007 ... value mask: 0000ffffffffffff ... max period: 00007fffffffffff ... global_ctrl mask: 00000007000000ff signal: max sigframe size: 1616 Estimated ratio of average max frequency by base frequency (times 1024): 1056 rcu: Hierarchical SRCU implementation. rcu: Max phase no-delay instances is 400. Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. smp: Bringing up secondary CPUs ... smpboot: x86: Booting SMP configuration: .... node #0, CPUs: #1 #2 #3 Masked ExtINT on CPU#1 Masked ExtINT on CPU#2 Masked ExtINT on CPU#3 smp: Brought up 1 node, 4 CPUs smpboot: Total of 4 processors activated (25599.84 BogoMIPS) node 0 deferred pages initialised in 86ms Memory: 26116212K/33430300K available (31097K kernel code, 21159K rwdata, 22192K rodata, 7772K init, 19352K bss, 7300496K reserved, 0K cma-reserved) devtmpfs: initialized x86/mm: Memory block size: 128MB ACPI: PM: Registering ACPI NVS region [mem 0x77b41000-0x77b41fff] (4096 bytes) ACPI: PM: Registering ACPI NVS region [mem 0x8730a000-0x87abefff] (8081408 bytes) Running RCU synchronous self tests Running RCU synchronous self tests Running RCU Tasks wait API self tests Running RCU Tasks Rude wait API self tests Running RCU Tasks Trace wait API self tests clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns posixtimers hash table entries: 2048 (order: 6, 147456 bytes, linear) futex hash table entries: 1024 (131072 bytes on 1 NUMA nodes, total 128 KiB, linear). Callback from call_rcu_tasks_trace() invoked. NET: Registered PF_NETLINK/PF_ROUTE protocol family DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations audit: initializing netlink subsys (disabled) audit: type=2000 audit(1773408420.511:1): state=initialized audit_enabled=0 res=1 thermal_sys: Registered thermal governor 'fair_share' thermal_sys: Registered thermal governor 'step_wise' thermal_sys: Registered thermal governor 'user_space' cpuidle: using governor ladder cpuidle: using governor menu ACPI FADT declares the system doesn't support PCIe ASPM, so disable it acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 PCI: ECAM [mem 0xe0000000-0xefffffff] (base 0xe0000000) for domain 0000 [bus 00-ff] PCI: ECAM [mem 0xe0000000-0xefffffff] reserved as E820 entry PCI: Using configuration type 1 for base access kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page Callback from call_rcu_tasks() invoked. ACPI: Added _OSI(Module Device) ACPI: Added _OSI(Processor Device) ACPI: Added _OSI(Processor Aggregator Device) ACPI: 8 ACPI AML tables successfully acquired and loaded ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored ACPI: \_SB_: platform _OSC: OS support mask [006e7eff] ACPI: \_SB_: platform _OSC: OS control mask [0000003b] ACPI: Dynamic OEM Table Load: ACPI: SSDT 0xFFFF888102040800 00037F (v02 PmRef Cpu0Cst 00003001 INTL 20120913) ACPI: Dynamic OEM Table Load: ACPI: SSDT 0xFFFF888103B7D000 0006A2 (v02 PmRef Cpu0Ist 00003000 INTL 20120913) ACPI: Dynamic OEM Table Load: ACPI: SSDT 0xFFFF8881015C9700 00008E (v02 PmRef Cpu0Hwp 00003000 INTL 20120913) ACPI: Dynamic OEM Table Load: ACPI: SSDT 0xFFFF8881020B7400 000130 (v02 PmRef HwpLvt 00003000 INTL 20120913) ACPI: Dynamic OEM Table Load: ACPI: SSDT 0xFFFF888103B81000 0005AA (v02 PmRef ApIst 00003000 INTL 20120913) ACPI: Dynamic OEM Table Load: ACPI: SSDT 0xFFFF888101680800 000119 (v02 PmRef ApHwp 00003000 INTL 20120913) ACPI: Dynamic OEM Table Load: ACPI: SSDT 0xFFFF88810201F400 000119 (v02 PmRef ApCst 00003000 INTL 20120913) ACPI: Interpreter enabled ACPI: PM: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug PCI: Using E820 reservations for host bridge windows ACPI: Enabled 7 GPEs in block 00 to 7F ACPI: \_SB_.PCI0.PEG0.PG00: New power resource ACPI: \_SB_.PCI0.PEG1.PG01: New power resource ACPI: \_SB_.PCI0.PEG2.PG02: New power resource ACPI: \_SB_.PCI0.RP09.PXSX.WRST: New power resource ACPI: \_SB_.PCI0.RP10.PXSX.WRST: New power resource ACPI: \_SB_.PCI0.RP11.PXSX.WRST: New power resource ACPI: \_SB_.PCI0.RP12.PXSX.WRST: New power resource ACPI: \_SB_.PCI0.RP13.PXSX.WRST: New power resource ACPI: \_SB_.PCI0.RP01.PXSX.WRST: New power resource ACPI: \_SB_.PCI0.RP02.PXSX.WRST: New power resource ACPI: \_SB_.PCI0.RP03.PXSX.WRST: New power resource ACPI: \_SB_.PCI0.RP04.PXSX.WRST: New power resource ACPI: \_SB_.PCI0.RP05.PXSX.WRST: New power resource ACPI: \_SB_.PCI0.RP06.PXSX.WRST: New power resource ACPI: \_SB_.PCI0.RP07.PXSX.WRST: New power resource ACPI: \_SB_.PCI0.RP08.PXSX.WRST: New power resource ACPI: \_SB_.PCI0.RP17.PXSX.WRST: New power resource ACPI: \_SB_.PCI0.RP18.PXSX.WRST: New power resource ACPI: \_SB_.PCI0.RP19.PXSX.WRST: New power resource ACPI: \_SB_.PCI0.RP20.PXSX.WRST: New power resource ACPI: \_SB_.PCI0.RP14.PXSX.WRST: New power resource ACPI: \_SB_.PCI0.RP15.PXSX.WRST: New power resource ACPI: \_SB_.PCI0.RP16.PXSX.WRST: New power resource ACPI: \_TZ_.FN00: New power resource ACPI: \_TZ_.FN01: New power resource ACPI: \_TZ_.FN02: New power resource ACPI: \_TZ_.FN03: New power resource ACPI: \_TZ_.FN04: New power resource ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR DPC] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration PCI host bridge to bus 0000:00 pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] pci_bus 0000:00: root bus resource [mem 0x8c000000-0xdfffffff window] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window] pci_bus 0000:00: root bus resource [bus 00-fe] pci 0000:00:00.0: [8086:191f] type 00 class 0x060000 conventional PCI endpoint pci 0000:00:01.0: [8086:1901] type 01 class 0x060400 PCIe Root Port pci 0000:00:01.0: PCI bridge to [bus 01] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold pci 0000:00:02.0: [8086:1912] type 00 class 0x030000 PCIe Root Complex Integrated Endpoint pci 0000:00:02.0: BAR 0 [mem 0xde000000-0xdeffffff 64bit] pci 0000:00:02.0: BAR 2 [mem 0xc0000000-0xcfffffff 64bit pref] pci 0000:00:02.0: BAR 4 [io 0xf000-0xf03f] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] pci 0000:00:14.0: [8086:a12f] type 00 class 0x0c0330 conventional PCI endpoint pci 0000:00:14.0: BAR 0 [mem 0xdf030000-0xdf03ffff 64bit] pci 0000:00:14.0: PME# supported from D3hot D3cold pci 0000:00:14.2: [8086:a131] type 00 class 0x118000 conventional PCI endpoint pci 0000:00:14.2: BAR 0 [mem 0xdf04e000-0xdf04efff 64bit] pci 0000:00:16.0: [8086:a13a] type 00 class 0x078000 conventional PCI endpoint pci 0000:00:16.0: BAR 0 [mem 0xdf04d000-0xdf04dfff 64bit] pci 0000:00:16.0: PME# supported from D3hot pci 0000:00:17.0: [8086:a102] type 00 class 0x010601 conventional PCI endpoint pci 0000:00:17.0: BAR 0 [mem 0xdf048000-0xdf049fff] pci 0000:00:17.0: BAR 1 [mem 0xdf04c000-0xdf04c0ff] pci 0000:00:17.0: BAR 2 [io 0xf090-0xf097] pci 0000:00:17.0: BAR 3 [io 0xf080-0xf083] pci 0000:00:17.0: BAR 4 [io 0xf060-0xf07f] pci 0000:00:17.0: BAR 5 [mem 0xdf04b000-0xdf04b7ff] pci 0000:00:17.0: PME# supported from D3hot pci 0000:00:1c.0: [8086:a110] type 01 class 0x060400 PCIe Root Port pci 0000:00:1c.0: PCI bridge to [bus 02-03] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1f.0: [8086:a146] type 00 class 0x060100 conventional PCI endpoint pci 0000:00:1f.2: [8086:a121] type 00 class 0x058000 conventional PCI endpoint pci 0000:00:1f.2: BAR 0 [mem 0xdf044000-0xdf047fff] pci 0000:00:1f.3: [8086:a170] type 00 class 0x040300 conventional PCI endpoint pci 0000:00:1f.3: BAR 0 [mem 0xdf040000-0xdf043fff 64bit] pci 0000:00:1f.3: BAR 4 [mem 0xdf020000-0xdf02ffff 64bit] pci 0000:00:1f.3: PME# supported from D3hot D3cold pci 0000:00:1f.4: [8086:a123] type 00 class 0x0c0500 conventional PCI endpoint pci 0000:00:1f.4: BAR 0 [mem 0xdf04a000-0xdf04a0ff 64bit] pci 0000:00:1f.4: BAR 4 [io 0xf040-0xf05f] pci 0000:00:1f.6: [8086:15b7] type 00 class 0x020000 conventional PCI endpoint pci 0000:00:1f.6: BAR 0 [mem 0xdf000000-0xdf01ffff] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold pci 0000:00:01.0: PCI bridge to [bus 01] pci 0000:02:00.0: [104c:8240] type 01 class 0x060400 PCIe to PCI/PCI-X bridge pci 0000:02:00.0: PCI bridge to [bus 03] pci 0000:02:00.0: supports D1 D2 pci 0000:00:1c.0: PCI bridge to [bus 02-03] pci_bus 0000:03: extended config space not accessible pci 0000:02:00.0: PCI bridge to [bus 03] ACPI: PCI: Interrupt link LNKA configured for IRQ 7 ACPI: PCI: Interrupt link LNKA disabled ACPI: PCI: Interrupt link LNKB configured for IRQ 10 ACPI: PCI: Interrupt link LNKB disabled ACPI: PCI: Interrupt link LNKC configured for IRQ 5 ACPI: PCI: Interrupt link LNKC disabled ACPI: PCI: Interrupt link LNKD configured for IRQ 11 ACPI: PCI: Interrupt link LNKD disabled ACPI: PCI: Interrupt link LNKE configured for IRQ 7 ACPI: PCI: Interrupt link LNKE disabled ACPI: PCI: Interrupt link LNKF configured for IRQ 3 ACPI: PCI: Interrupt link LNKF disabled ACPI: PCI: Interrupt link LNKG configured for IRQ 4 ACPI: PCI: Interrupt link LNKG disabled ACPI: PCI: Interrupt link LNKH configured for IRQ 11 ACPI: PCI: Interrupt link LNKH disabled iommu: Default domain type: Translated iommu: DMA domain TLB invalidation policy: lazy mode SCSI subsystem initialized ACPI: bus type USB registered usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb pps_core: LinuxPPS API ver. 1 registered pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti PTP clock support registered EDAC MC: Ver: 3.0.0 NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO NetLabel: unlabeled traffic allowed by default PCI: Using ACPI for IRQ routing PCI: pci_cache_line_size set to 64 bytes e820: register RAM buffer resource [mem 0x0009c800-0x0009ffff] e820: register RAM buffer resource [mem 0x77b41000-0x77ffffff] e820: register RAM buffer resource [mem 0x77bbe000-0x77ffffff] e820: register RAM buffer resource [mem 0x86f57000-0x87ffffff] e820: register RAM buffer resource [mem 0x872000000-0x873ffffff] pci 0000:00:02.0: vgaarb: setting as boot VGA device pci 0000:00:02.0: vgaarb: bridge control possible pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 hpet0: 8 comparators, 64-bit 24.000000 MHz counter clocksource: Switched to clocksource tsc-early VFS: Disk quotas dquot_6.6.0 VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) netfs: FS-Cache loaded acpi PNP0C02:00: Reserved [io 0x0a00-0x0a3f] acpi PNP0C02:00: Reserved [io 0x0a40-0x0a7f] acpi PNP0C02:01: Skipped [io 0x002e-0x002f] acpi PNP0C02:01: Skipped [io 0x004e-0x004f] acpi PNP0C02:01: Skipped [io 0x0061] acpi PNP0C02:01: Skipped [io 0x0063] acpi PNP0C02:01: Skipped [io 0x0065] acpi PNP0C02:01: Skipped [io 0x0067] acpi PNP0C02:01: Skipped [io 0x0070] acpi PNP0C02:01: Skipped [io 0x0080] acpi PNP0C02:01: Skipped [io 0x0092] acpi PNP0C02:01: Skipped [io 0x00b2-0x00b3] acpi PNP0C02:01: Reserved [io 0x0680-0x069f] acpi PNP0C02:01: Reserved [io 0xffff] acpi PNP0C02:01: Reserved [io 0xffff] acpi PNP0C02:01: Reserved [io 0xffff] acpi PNP0C02:01: Could not reserve [io 0x1800-0x18fe] acpi PNP0C02:01: Reserved [io 0x164e-0x164f] acpi PNP0C02:02: Reserved [io 0x0800-0x087f] acpi PNP0C02:03: Reserved [mem 0xfed10000-0xfed17fff] acpi PNP0C02:03: Reserved [mem 0xfed18000-0xfed18fff] acpi PNP0C02:03: Reserved [mem 0xfed19000-0xfed19fff] acpi PNP0C02:03: Reserved [mem 0xe0000000-0xefffffff] acpi PNP0C02:03: Reserved [mem 0xfed20000-0xfed3ffff] acpi PNP0C02:03: Could not reserve [mem 0xfed90000-0xfed93fff] acpi PNP0C02:03: Reserved [mem 0xfed45000-0xfed8ffff] acpi PNP0C02:03: Reserved [mem 0xff000000-0xffffffff] acpi PNP0C02:03: Could not reserve [mem 0xfee00000-0xfeefffff] acpi PNP0C02:03: Reserved [mem 0xdffe0000-0xdfffffff] acpi PNP0C02:04: Reserved [mem 0xfd000000-0xfdabffff] acpi PNP0C02:04: Reserved [mem 0xfdad0000-0xfdadffff] acpi PNP0C02:04: Reserved [mem 0xfdb00000-0xfdffffff] acpi PNP0C02:04: Could not reserve [mem 0xfe000000-0xfe01ffff] acpi PNP0C02:04: Reserved [mem 0xfe036000-0xfe03bfff] acpi PNP0C02:04: Reserved [mem 0xfe03d000-0xfe3fffff] acpi PNP0C02:04: Reserved [mem 0xfe410000-0xfe7fffff] acpi PNP0C02:05: Reserved [io 0xff00-0xfffe] acpi PNP0C02:06: Reserved [mem 0xfdaf0000-0xfdafffff] acpi PNP0C02:06: Reserved [mem 0xfdae0000-0xfdaeffff] acpi PNP0C02:06: Reserved [mem 0xfdac0000-0xfdacffff] pnp: PnP ACPI init pnp 00:00: [dma 0 disabled] pnp: PnP ACPI: found 2 devices clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns NET: Registered PF_INET protocol family IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) tcp_listen_portaddr_hash hash table entries: 16384 (order: 9, 1179648 bytes, linear) Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear) TCP bind hash table entries: 65536 (order: 12, 9437184 bytes, vmalloc hugepage) TCP: Hash tables configured (established 262144 bind 65536) MPTCP token hash table entries: 32768 (order: 10, 2883584 bytes, linear) UDP hash table entries: 16384 (order: 10, 4194304 bytes, linear) UDP-Lite hash table entries: 16384 (order: 10, 4194304 bytes, linear) NET: Registered PF_UNIX/PF_LOCAL protocol family RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp-with-tls transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. NET: Registered PF_XDP protocol family pci 0000:00:01.0: PCI bridge to [bus 01] pci 0000:02:00.0: PCI bridge to [bus 03] pci 0000:00:1c.0: PCI bridge to [bus 02-03] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] pci_bus 0000:00: resource 7 [mem 0x8c000000-0xdfffffff window] pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window] IOAPIC[2]: Set IRTE entry (P:1 FPD:0 Dst_Mode:0 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:0 Avail:0 Vector:EF Dest:00000000 SID:F0F8 SQ:0 SVT:1) IOAPIC[0]: Preconfigured routing entry (2-18 -> IRQ 18 Level:1 ActiveLow:1) pci 0000:00:14.0: quirk_usb_early_handoff+0x0/0x1b0 took 29933 usecs PCI: CLS 0 bytes, default 64 pci 0000:00:1f.1: [8086:a120] type 00 class 0x058000 conventional PCI endpoint pci 0000:00:1f.1: BAR 0 [mem 0xfd000000-0xfdffffff 64bit] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) Trying to unpack rootfs image as initramfs... software IO TLB: mapped [mem 0x0000000082f57000-0x0000000086f57000] (64MB) ACPI: bus type thunderbolt registered Initialise system trusted keyrings Key type blacklist registered workingset: timestamp_bits=36 max_order=23 bucket_order=0 fuse: init (API version 7.45) 9p: Installing v9fs 9p2000 file system support integrity: Platform Keyring initialized integrity: Machine keyring initialized cryptd: max_cpu_qlen set to 1000 NET: Registered PF_ALG protocol family Key type asymmetric registered Asymmetric key parser 'x509' registered Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244) io scheduler mq-deadline registered io scheduler kyber registered io scheduler bfq registered IOAPIC[2]: Set IRTE entry (P:1 FPD:0 Dst_Mode:0 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:0 Avail:0 Vector:EF Dest:00000000 SID:F0F8 SQ:0 SVT:1) IOAPIC[0]: Preconfigured routing entry (2-16 -> IRQ 16 Level:1 ActiveLow:1) pcieport 0000:00:01.0: PME: Signaling with IRQ 120 pcieport 0000:00:1c.0: PME: Signaling with IRQ 121 pcieport 0000:00:1c.0: AER: enabled with IRQ 121 input: Sleep Button as /devices/platform/PNP0C0E:00/input/input0 ACPI: button: Sleep Button [SLPB] input: Power Button as /devices/platform/PNP0C0C:00/input/input1 ACPI: button: Power Button [PWRB] input: Power Button as /devices/platform/LNXPWRBN:00/input/input2 ACPI: button: Power Button [PWRF] Monitor-Mwait will be used to enter C-1 state Monitor-Mwait will be used to enter C-2 state Monitor-Mwait will be used to enter C-3 state acpi LNXTHERM:00: registered as thermal_zone0 ACPI: thermal: Thermal Zone [TZ00] (28 C) acpi LNXTHERM:01: registered as thermal_zone1 ACPI: thermal: Thermal Zone [TZ01] (30 C) Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled 00:00: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A Non-volatile memory driver v1.3 loop: module loaded rdac: device handler registered hp_sw: device handler registered emc: device handler registered alua: device handler registered e1000: Intel(R) PRO/1000 Network Driver e1000: Copyright (c) 1999-2006 Intel Corporation. e1000e: Intel(R) PRO/1000 Network Driver e1000e: Copyright(c) 1999 - 2015 Intel Corporation. IOAPIC[2]: Set IRTE entry (P:1 FPD:0 Dst_Mode:0 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:0 Avail:0 Vector:EF Dest:00000000 SID:F0F8 SQ:0 SVT:1) IOAPIC[0]: Preconfigured routing entry (2-19 -> IRQ 19 Level:1 ActiveLow:1) e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) 64:00:6a:25:80:ba e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection e1000e 0000:00:1f.6 eth0: MAC: 12, PHY: 12, PBA No: FFFFFF-0FF igb: Intel(R) Gigabit Ethernet Network Driver igb: Copyright (c) 2007-2014 Intel Corporation. Intel(R) 2.5G Ethernet Linux Driver Copyright(c) 2018 Intel Corporation. usbcore: registered new interface driver asix IOAPIC[2]: Set IRTE entry (P:1 FPD:0 Dst_Mode:0 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:0 Avail:0 Vector:EF Dest:00000000 SID:F0F8 SQ:0 SVT:1) IOAPIC[0]: Preconfigured routing entry (2-18 -> IRQ 18 Level:1 ActiveLow:1) xhci_hcd 0000:00:14.0: xHCI Host Controller xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000001109810 xhci_hcd 0000:00:14.0: xHCI Host Controller xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 7.00 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: xHCI Host Controller usb usb1: Manufacturer: Linux 7.0.0-rc2-00273-g5e4b47fd150c xhci-hcd usb usb1: SerialNumber: 0000:00:14.0 hub 1-0:1.0: USB hub found hub 1-0:1.0: 16 ports detected tsc: Refined TSC clocksource calibration: 3191.999 MHz clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2e02c398820, max_idle_ns: 440795273435 ns clocksource: Switched to clocksource tsc usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 7.00 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: xHCI Host Controller usb usb2: Manufacturer: Linux 7.0.0-rc2-00273-g5e4b47fd150c xhci-hcd usb usb2: SerialNumber: 0000:00:14.0 hub 2-0:1.0: USB hub found hub 2-0:1.0: 10 ports detected usbcore: registered new interface driver usbserial_generic usbserial: USB Serial support registered for generic i8042: PNP: No PS/2 controller found. mousedev: PS/2 mouse device common for all mice rtc_cmos 00:01: RTC can wake from S4 rtc_cmos 00:01: registered as rtc0 rtc_cmos 00:01: setting system clock to 2026-03-13T13:27:09 UTC (1773408429) rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram intel_pstate: HWP enabled by BIOS intel_pstate: Intel P-state driver initializing intel_pstate: HWP enabled hid: raw HID events driver (C) Jiri Kosina usbcore: registered new interface driver usbhid usbhid: USB HID core driver drop_monitor: Initializing network drop monitor service Initializing XFRM netlink socket NET: Registered PF_INET6 protocol family Segment Routing with IPv6 In-situ OAM (IOAM) with IPv6 NET: Registered PF_PACKET protocol family 9pnet: Installing 9P2000 support NET: Registered PF_VSOCK protocol family mpls_gso: MPLS GSO support microcode: Current revision: 0x00000039 IPI shorthand broadcast: enabled ... APIC ID: 00000000 (0) ... APIC VERSION: 01060015 0000000000000000000000000000000000000000000000000000000000000000 0000000000000000000000000000000000000000000000000000000000000000 0000000000000000000000000000000000000000000000000000000008001000 number of MP IRQ sources: 15. number of IO-APIC #2 registers: 120. testing the IO APIC....................... IO APIC #2...... .... register #00: 02000000 ....... : physical APIC id: 02 ....... : Delivery Type: 0 ....... : LTS : 0 .... register #01: 00770020 ....... : max redirection entries: 77 ....... : PRQ implemented: 0 ....... : IO APIC version: 20 .... register #02: 00000000 ....... : arbitration: 00 .... IRQ redirection table: IOAPIC 0: pin00, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin01, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin02, enabled , edge , high, V(02), IRR(0), S(0), remapped, I(0001), Z(0) pin03, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin04, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin05, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin06, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin07, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin08, enabled , edge , high, V(08), IRR(0), S(0), remapped, I(0007), Z(0) pin09, enabled , level, high, V(09), IRR(0), S(0), remapped, I(0008), Z(0) pin0a, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin0b, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin0c, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin0d, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin0e, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin0f, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin10, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin11, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin12, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin13, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin14, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin15, disabled, edge , high, V(C0), IRR(0), S(0), physical, D(0840), M(2) pin16, disabled, edge , high, V(C9), IRR(0), S(0), physical, D(0C00), M(2) pin17, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin18, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin19, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin1a, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin1b, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin1c, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin1d, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin1e, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin1f, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin20, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin21, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin22, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin23, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin24, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin25, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin26, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin27, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin28, disabled, edge , high, V(00), IRR(0), S(0), remapped, I(1209), Z(2) pin29, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin2a, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin2b, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin2c, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin2d, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin2e, disabled, edge , high, V(01), IRR(0), S(0), physical, D(0400), M(2) pin2f, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin30, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin31, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin32, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin33, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin34, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin35, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin36, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin37, disabled, edge , high, V(20), IRR(0), S(0), physical, D(0080), M(2) pin38, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin39, disabled, edge , high, V(02), IRR(0), S(0), physical, D(0020), M(2) pin3a, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin3b, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin3c, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin3d, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin3e, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin3f, disabled, edge , high, V(40), IRR(0), S(0), physical, D(00D0), M(2) pin40, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin41, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin42, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin43, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin44, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin45, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin46, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin47, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin48, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin49, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin4a, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin4b, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin4c, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin4d, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin4e, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin4f, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin50, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin51, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin52, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin53, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin54, disabled, edge , high, V(01), IRR(0), S(0), logical , D(6402), M(2) pin55, disabled, edge , high, V(00), IRR(0), S(0), physical, D(2040), M(2) pin56, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin57, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin58, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin59, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin5a, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin5b, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin5c, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin5d, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin5e, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin5f, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin60, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin61, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin62, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin63, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin64, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin65, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin66, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin67, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0004), M(2) pin68, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin69, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin6a, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin6b, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin6c, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin6d, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin6e, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin6f, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin70, disabled, edge , high, V(00), IRR(0), S(0), physical, D(4804), M(2) pin71, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin72, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin73, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin74, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin75, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin76, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin77, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0091), M(2) IRQ to pin mappings: IRQ0 -> 0:2 IRQ1 -> 0:1 IRQ3 -> 0:3 IRQ4 -> 0:4 IRQ5 -> 0:5 IRQ6 -> 0:6 IRQ7 -> 0:7 IRQ8 -> 0:8 IRQ9 -> 0:9 IRQ10 -> 0:10 IRQ11 -> 0:11 IRQ12 -> 0:12 IRQ13 -> 0:13 IRQ14 -> 0:14 IRQ15 -> 0:15 IRQ16 -> 0:16 IRQ18 -> 0:18 IRQ19 -> 0:19 .................................... done. sched_clock: Marking stable (11119005325, 1129383248)->(12593196474, -344807901) registered taskstats version 1 Loading compiled-in X.509 certificates Loaded X.509 cert 'Build time autogenerated kernel key: 447f92e0c85b126b6b8c06f1aba6d02519d92803' Demotion targets for Node 0: null Key type big_key registered Key type encrypted registered ima: No TPM chip found, activating TPM-bypass! Loading compiled-in module X.509 certificates Loaded X.509 cert 'Build time autogenerated kernel key: 447f92e0c85b126b6b8c06f1aba6d02519d92803' ima: Allocated hash algorithm: sha256 ima: No architecture policies found evm: Initialising EVM extended attributes: evm: security.selinux evm: security.SMACK64 (disabled) evm: security.SMACK64EXEC (disabled) evm: security.SMACK64TRANSMUTE (disabled) evm: security.SMACK64MMAP (disabled) evm: security.apparmor (disabled) evm: security.ima evm: security.capability evm: HMAC attrs: 0x1 Running certificate verification RSA selftest Loaded X.509 cert 'Certificate verification self-testing key: f58703bb33ce1b73ee02eccdee5b8817518fe3db' Running certificate verification ECDSA selftest Freeing initrd memory: 2336292K Loaded X.509 cert 'Certificate verification ECDSA self-testing key: 2900bcea1deb7bc8479a84a23d758efdfdd2b2d3' e1000e 0000:00:1f.6 eth0: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None Sending DHCP requests ..., OK IP-Config: Got DHCP answer from 192.168.3.1, my address is 192.168.3.93 IP-Config: Complete: device=eth0, hwaddr=64:00:6a:25:80:ba, ipaddr=192.168.3.93, mask=255.255.255.0, gw=192.168.3.200 host=lkp-skl-d02, domain=lkp.intel.com, nis-domain=(none) bootserver=192.168.3.200, rootserver=192.168.3.200, rootpath= nameserver0=192.168.3.200 clk: Disabling unused clocks PM: genpd: Disabling unused power domains Freeing unused decrypted memory: 2036K Freeing unused kernel image (initmem) memory: 7772K Write protecting the kernel read-only data: 55296k Freeing unused kernel image (text/rodata gap) memory: 1668K Freeing unused kernel image (rodata/data gap) memory: 336K x86/mm: Checked W+X mappings: passed, no W+X pages found. x86/mm: Checking user space page tables x86/mm: Checked W+X mappings: passed, no W+X pages found. Run /init as init process with arguments: /init nokaslr with environment: HOME=/ TERM=linux RESULT_ROOT=/result/perf-stat-tests/defaults/lkp-skl-d02/debian-13-x86_64-20250902.cgz/x86_64-rhel-9.4-bpf/gcc-14/5e4b47fd150c2ab74396945eae895ed419505daa/0 branch=matttbe-net-next/gh-issue-617-stalls-starting-vsock job=/lkp/jobs/scheduled/lkp-skl-d02/perf-stat-tests-defaults-debian-13-x86_64-20250902.cgz-5e4b47fd150c-20260312-3836505-b2g5sk-5.yaml user=lkp ARCH=x86_64 kconfig=x86_64-rhel-9.4-bpf commit=5e4b47fd150c2ab74396945eae895ed419505daa max_uptime=7200 LKP_SERVER=internal-lkp-server load_ramdisk=2 prompt_ramdisk=0 vga=normal ACPI: bus type drm_connector registered EDAC ie31200: No ECC support EDAC ie31200: No ECC support libata version 3.00 loaded. Linux agpgart interface v0.103 IOAPIC[0]: Preconfigured routing entry (2-17 -> IRQ 17 Level:1 ActiveLow:1) mei_me 0000:00:16.0: enabling device (0000 -> 0002) ahci 0000:00:17.0: 4/4 ports implemented (port mask 0xf) ahci 0000:00:17.0: flags: 64bit ncq sntf pm led clo only pio slum part ems deso sadm sds apst intel_pmc_core INT33A1:00: initialized LKP: ttyS0: 227: current_version: 39, target_version: f0 LKP: ttyS0: 227: deploy intel ucode microcode: Unsafe microcode update: Microcode header does not specify a required min version microcode: Late microcode loading without minimal revision check. input: PC Speaker as /devices/platform/pcspkr/input/input3 microcode: You should switch to early loading, if possible. microcode: revision: 0x39 -> 0xf0 x86/CPU: CPU features have changed after loading microcode, but might not take effect. x86/CPU: Please consider either early loading through initrd/built-in or a potential BIOS update. scsi host0: ahci scsi host1: ahci Error: Driver 'pcspkr' is already registered, aborting... scsi host2: ahci scsi host3: ahci LKP: ttyS0: 227: Kernel tests: Boot OK! LKP: ttyS0: 227: HOSTNAME lkp-skl-d02, MAC 64:00:6a:25:80:ba, kernel 7.0.0-rc2-00273-g5e4b47fd150c 1 ata1: SATA max UDMA/133 abar m2048@0xdf04b000 port 0xdf04b100 irq 128 lpm-pol 0 ata2: SATA max UDMA/133 abar m2048@0xdf04b000 port 0xdf04b180 irq 128 lpm-pol 0 ata3: SATA max UDMA/133 abar m2048@0xdf04b000 port 0xdf04b200 irq 128 lpm-pol 0 ata4: SATA max UDMA/133 abar m2048@0xdf04b000 port 0xdf04b280 irq 128 lpm-pol 0 i801_smbus 0000:00:1f.4: SPD Write Disable is set i801_smbus 0000:00:1f.4: SMBus using PCI interrupt iTCO_wdt iTCO_wdt: Found a Intel PCH TCO device (Version=4, TCOBASE=0x0400) iTCO_wdt iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) ata2.00: Model 'INTEL SSDSC2KG960G8', rev 'XCV10110', applying quirks: zeroaftertrim ata2.00: ATA-10: INTEL SSDSC2KG960G8, XCV10110, max UDMA/133 ata2.00: 1875385008 sectors, multi 1: LBA48 NCQ (depth 32) ata3: SATA link down (SStatus 4 SControl 300) ata4: SATA link down (SStatus 4 SControl 300) ata2.00: configured for UDMA/133 i2c i2c-0: Successfully instantiated SPD at 0x50 i2c i2c-0: Successfully instantiated SPD at 0x51 i2c i2c-0: Successfully instantiated SPD at 0x52 i2c i2c-0: Successfully instantiated SPD at 0x53 ata1.00: ATA-9: ST2000NM0033-9ZM175, SN06, max UDMA/133 ata1.00: NCQ Non-Data Log not supported ata1.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 32), AA ata1.00: Features: DIPM ata1.00: NCQ Non-Data Log not supported ata1.00: configured for UDMA/133 scsi 0:0:0:0: Direct-Access ATA ST2000NM0033-9ZM SN06 PQ: 0 ANSI: 5 scsi 1:0:0:0: Direct-Access ATA INTEL SSDSC2KG96 0110 PQ: 0 ANSI: 5 dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.4) RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer RAPL PMU: hw unit of domain pp0-core 2^-14 Joules RAPL PMU: hw unit of domain package 2^-14 Joules RAPL PMU: hw unit of domain dram 2^-14 Joules RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules input: Dell WMI hotkeys as /devices/platform/PNP0C14:00/wmi_bus/wmi_bus-PNP0C14:00/9DBB5994-A997-11DA-B012-B622A1EF5492-2/input/input4 scsi 0:0:0:0: Attached scsi generic sg0 type 0 scsi 1:0:0:0: Attached scsi generic sg1 type 0 ata2.00: Enabling discard_zeroes_data sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) sd 1:0:0:0: [sdb] 1875385008 512-byte logical blocks: (960 GB/894 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 1:0:0:0: [sdb] 4096-byte physical blocks sd 1:0:0:0: [sdb] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes sd 1:0:0:0: [sdb] Preferred minimum I/O size 4096 bytes ata2.00: Enabling discard_zeroes_data sdb: sdb1 sdb2 sd 1:0:0:0: [sdb] Attached SCSI disk sda: sda1 sda2 sda3 sda4 sd 0:0:0:0: [sda] Attached SCSI disk raid6: skipped pq benchmark and selected avx2x4 raid6: using avx2x2 recovery algorithm xor: automatically using best checksumming function avx intel_rapl_common: Found RAPL domain package intel_rapl_common: Found RAPL domain core intel_rapl_common: Found RAPL domain uncore intel_rapl_common: Found RAPL domain dram Btrfs loaded, zoned=yes, fsverity=yes is_virt=false lkp: kernel tainted state: 2052 LKP: stdout: 227: Kernel tests: Boot OK! LKP: stdout: 227: HOSTNAME lkp-skl-d02, MAC 64:00:6a:25:80:ba, kernel 7.0.0-rc2-00273-g5e4b47fd150c 1 install debs round one: dpkg -i --force-confdef --force-depends /opt/deb/libexpat1_2.7.1-2_amd64.deb /opt/deb/libpython3.13-minimal_3.13.5-2_amd64.deb /opt/deb/python3.13-minimal_3.13.5-2_amd64.deb /opt/deb/python3-minimal_3.13.5-1_amd64.deb /opt/deb/libpython3.13-stdlib_3.13.5-2_amd64.deb /opt/deb/python3.13_3.13.5-2_amd64.deb /opt/deb/libpython3-stdlib_3.13.5-1_amd64.deb /opt/deb/python3_3.13.5-1_amd64.deb /opt/deb/python3-ntp_1.2.3+dfsg1-8_amd64.deb /opt/deb/ntpsec-ntpdate_1.2.3+dfsg1-8_amd64.deb /opt/deb/ntpdate_1%3a4.2.8p15+dfsg-2~1.2.2+dfsg1-1+deb12u1_all.deb /opt/deb/openssl-provider-legacy_3.5.4-1~deb13u1_amd64.deb /opt/deb/libssl3t64_3.5.4-1~deb13u1_amd64.deb /opt/deb/libdbus-1-3_1.16.2-2_amd64.deb /opt/deb/dbus-bin_1.16.2-2_amd64.deb /opt/deb/dbus-session-bus-common_1.16.2-2_all.deb /opt/deb/dbus-daemon_1.16.2-2_amd64.deb /opt/deb/dbus-system-bus-common_1.16.2-2_all.deb /opt/deb/dbus_1.16.2-2_amd64.deb /opt/deb/gawk_1%3a5.2.1-2+b1_amd64.deb /opt/deb/openssl_3.5.4-1~deb13u1_amd64.deb /opt/deb/ca-certificates_20250419_all.deb /opt/deb/perl-modules-5.40_5.40.1-6_all.deb /opt/deb/libgdbm-compat4t64_1.24-2_amd64.deb /opt/deb/libperl5.40_5.40.1-6_amd64.deb /opt/deb/perl_5.40.1-6_amd64.deb /opt/deb/libatomic1_14.2.0-19_amd64.deb /opt/deb/libdeflate0_1.23-2_amd64.deb /opt/deb/gtk-update-icon-cache_4.18.6+ds-2_amd64.deb /opt/deb/at-spi2-common_2.56.2-1+deb13u1_all.deb /opt/deb/libquadmath0_14.2.0-19_amd64.deb /opt/deb/libgcc-14-dev_14.2.0-19_amd64.deb /opt/deb/gcc-14-x86-64-linux-gnu_14.2.0-19_amd64.deb /opt/deb/gcc-14_14.2.0-19_amd64.deb /opt/deb/gcc-x86-64-linux-gnu_4%3a14.2.0-1_amd64.deb /opt/deb/gcc_4%3a14.2.0-1_amd64.deb /opt/deb/g++-14-x86-64-linux-gnu_14.2.0-19_amd64.deb /opt/deb/g++-14_14.2.0-19_amd64.deb /opt/deb/g++-x86-64-linux-gnu_4%3a14.2.0-1_amd64.deb /opt/deb/g++_4%3a14.2.0-1_amd64.deb /opt/deb/libdpkg-perl_1.22.21_all.deb /opt/deb/patch_2.8-2_amd64.deb /opt/deb/ca-certificates-java_20240118_all.deb /opt/deb/dbus-user-session_1.16.2-2_amd64.deb /opt/deb/libatk1.0-0t64_2.56.2-1+deb13u1_amd64.deb /opt/deb/libx11-data_2%3a1.8.12-1_all.deb /opt/deb/libatspi2.0-0t64_2.56.2-1+deb13u1_amd64.deb /opt/deb/libatk-bridge2.0-0t64_2.56.2-1+deb13u1_amd64.deb /opt/deb/libavahi-common-data_0.8-16_amd64.deb /opt/deb/libthai-data_0.1.29-2_all.deb /opt/deb/libdatrie1_0.2.13-3+b1_amd64.deb /opt/deb/xkb-data_2.42-1_all.deb /opt/deb/libasound2-data_1.2.14-1_all.deb /opt/deb/gir1.2-atk-1.0_2.56.2-1+deb13u1_amd64.deb /opt/deb/native-architecture_0.2.6_all.deb /opt/deb/libglib2.0-data_2.84.4-3~deb13u2_all.deb /opt/deb/python3-packaging_25.0-1_all.deb /opt/deb/libatk1.0-dev_2.56.2-1+deb13u1_amd64.deb /opt/deb/libexpat1-dev_2.7.1-2_amd64.deb /opt/deb/libdatrie-dev_0.2.13-3+b1_amd64.deb /opt/deb/libdeflate-dev_1.23-2_amd64.deb /opt/deb/libperl-dev_5.40.1-6_amd64.deb /opt/deb/libpython3.13_3.13.5-2_amd64.deb /opt/deb/libpython3.13-dev_3.13.5-2_amd64.deb /opt/deb/libpython3-dev_3.13.5-1_amd64.deb /opt/deb/libssl-dev_3.5.4-1~deb13u1_amd64.deb /opt/deb/python3-pygments_2.18.0+dfsg-2_all.deb /opt/deb/python3-yaml_6.0.2-1+b2_amd64.deb /opt/deb/sysstat_12.7.5-2_amd64.deb /opt/deb/python3-autocommand_2.2.2-3_all.deb /opt/deb/python3.13-dev_3.13.5-2_amd64.deb /opt/deb/python3-dev_3.13.5-1_amd64.deb /opt/deb/python3-more-itertools_10.7.0-1_all.deb /opt/deb/python3-typing-extensions_4.13.2-1_all.deb /opt/deb/python3-typeguard_4.4.2-1_all.deb /opt/deb/python3-inflect_7.3.1-2_all.deb /opt/deb/python3-jaraco.functools_4.1.0-1_all.deb /opt/deb/python3-pkg-resources_78.1.1-0.1_all.deb /opt/deb/python3-jaraco.text_4.0.0-1_all.deb /opt/deb/python3-zipp_3.21.0-1_all.deb /opt/deb/python3-setuptools_78.1.1-0.1_all.deb /opt/deb/python3-jaraco.context_6.0.1-1_all.deb Selecting previously unselected package libexpat1:amd64. (Reading database ... 7835 files and directories currently installed.) Preparing to unpack .../libexpat1_2.7.1-2_amd64.deb ... Unpacking libexpat1:amd64 (2.7.1-2) ... Selecting previously unselected package libpython3.13-minimal:amd64. Preparing to unpack .../libpython3.13-minimal_3.13.5-2_amd64.deb ... Unpacking libpython3.13-minimal:amd64 (3.13.5-2) ... Selecting previously unselected package python3.13-minimal. Preparing to unpack .../python3.13-minimal_3.13.5-2_amd64.deb ... Unpacking python3.13-minimal (3.13.5-2) ... Selecting previously unselected package python3-minimal. Preparing to unpack .../python3-minimal_3.13.5-1_amd64.deb ... Unpacking python3-minimal (3.13.5-1) ... Selecting previously unselected package libpython3.13-stdlib:amd64. Preparing to unpack .../libpython3.13-stdlib_3.13.5-2_amd64.deb ... Unpacking libpython3.13-stdlib:amd64 (3.13.5-2) ... Selecting previously unselected package python3.13. Preparing to unpack .../python3.13_3.13.5-2_amd64.deb ... Unpacking python3.13 (3.13.5-2) ... Selecting previously unselected package libpython3-stdlib:amd64. Preparing to unpack .../libpython3-stdlib_3.13.5-1_amd64.deb ... Unpacking libpython3-stdlib:amd64 (3.13.5-1) ... Selecting previously unselected package python3. Preparing to unpack .../deb/python3_3.13.5-1_amd64.deb ... Unpacking python3 (3.13.5-1) ... Selecting previously unselected package python3-ntp. Preparing to unpack .../python3-ntp_1.2.3+dfsg1-8_amd64.deb ... Unpacking python3-ntp (1.2.3+dfsg1-8) ... Selecting previously unselected package ntpsec-ntpdate. Preparing to unpack .../ntpsec-ntpdate_1.2.3+dfsg1-8_amd64.deb ... Unpacking ntpsec-ntpdate (1.2.3+dfsg1-8) ... Selecting previously unselected package ntpdate. Preparing to unpack .../ntpdate_1%3a4.2.8p15+dfsg-2~1.2.2+dfsg1-1+deb12u1_all.deb ... Unpacking ntpdate (1:4.2.8p15+dfsg-2~1.2.2+dfsg1-1+deb12u1) ... Preparing to unpack .../openssl-provider-legacy_3.5.4-1~deb13u1_amd64.deb ... Unpacking openssl-provider-legacy (3.5.4-1~deb13u1) over (3.5.1-1) ... Preparing to unpack .../libssl3t64_3.5.4-1~deb13u1_amd64.deb ... Unpacking libssl3t64:amd64 (3.5.4-1~deb13u1) over (3.5.1-1) ... Selecting previously unselected package libdbus-1-3:amd64. Preparing to unpack .../libdbus-1-3_1.16.2-2_amd64.deb ... Unpacking libdbus-1-3:amd64 (1.16.2-2) ... Selecting previously unselected package dbus-bin. Preparing to unpack .../dbus-bin_1.16.2-2_amd64.deb ... Unpacking dbus-bin (1.16.2-2) ... Selecting previously unselected package dbus-session-bus-common. Preparing to unpack .../dbus-session-bus-common_1.16.2-2_all.deb ... Unpacking dbus-session-bus-common (1.16.2-2) ... Selecting previously unselected package dbus-daemon. Preparing to unpack .../dbus-daemon_1.16.2-2_amd64.deb ... Unpacking dbus-daemon (1.16.2-2) ... Selecting previously unselected package dbus-system-bus-common. Preparing to unpack .../dbus-system-bus-common_1.16.2-2_all.deb ... Unpacking dbus-system-bus-common (1.16.2-2) ... Selecting previously unselected package dbus. Preparing to unpack .../deb/dbus_1.16.2-2_amd64.deb ... Unpacking dbus (1.16.2-2) ... Selecting previously unselected package gawk. Preparing to unpack .../gawk_1%3a5.2.1-2+b1_amd64.deb ... Unpacking gawk (1:5.2.1-2+b1) ... Selecting previously unselected package openssl. Preparing to unpack .../openssl_3.5.4-1~deb13u1_amd64.deb ... Unpacking openssl (3.5.4-1~deb13u1) ... Selecting previously unselected package ca-certificates. Preparing to unpack .../ca-certificates_20250419_all.deb ... Unpacking ca-certificates (20250419) ... Selecting previously unselected package perl-modules-5.40. Preparing to unpack .../perl-modules-5.40_5.40.1-6_all.deb ... Unpacking perl-modules-5.40 (5.40.1-6) ... Selecting previously unselected package libgdbm-compat4t64:amd64. Preparing to unpack .../libgdbm-compat4t64_1.24-2_amd64.deb ... Unpacking libgdbm-compat4t64:amd64 (1.24-2) ... Selecting previously unselected package libperl5.40:amd64. Preparing to unpack .../libperl5.40_5.40.1-6_amd64.deb ... Unpacking libperl5.40:amd64 (5.40.1-6) ... Selecting previously unselected package perl. Preparing to unpack .../deb/perl_5.40.1-6_amd64.deb ... Unpacking perl (5.40.1-6) ... Selecting previously unselected package libatomic1:amd64. Preparing to unpack .../libatomic1_14.2.0-19_amd64.deb ... Unpacking libatomic1:amd64 (14.2.0-19) ... Selecting previously unselected package libdeflate0:amd64. Preparing to unpack .../libdeflate0_1.23-2_amd64.deb ... Unpacking libdeflate0:amd64 (1.23-2) ... Selecting previously unselected package gtk-update-icon-cache. Preparing to unpack .../gtk-update-icon-cache_4.18.6+ds-2_amd64.deb ... No diversion 'diversion of /usr/sbin/update-icon-caches to /usr/sbin/update-icon-caches.gtk2 by libgtk-3-bin', none removed. No diversion 'diversion of /usr/share/man/man8/update-icon-caches.8.gz to /usr/share/man/man8/update-icon-caches.gtk2.8.gz by libgtk-3-bin', none removed. Unpacking gtk-update-icon-cache (4.18.6+ds-2) ... Selecting previously unselected package at-spi2-common. Preparing to unpack .../at-spi2-common_2.56.2-1+deb13u1_all.deb ... Unpacking at-spi2-common (2.56.2-1+deb13u1) ... Selecting previously unselected package libquadmath0:amd64. Preparing to unpack .../libquadmath0_14.2.0-19_amd64.deb ... Unpacking libquadmath0:amd64 (14.2.0-19) ... Selecting previously unselected package libgcc-14-dev:amd64. Preparing to unpack .../libgcc-14-dev_14.2.0-19_amd64.deb ... Unpacking libgcc-14-dev:amd64 (14.2.0-19) ... Selecting previously unselected package gcc-14-x86-64-linux-gnu. Preparing to unpack .../gcc-14-x86-64-linux-gnu_14.2.0-19_amd64.deb ... Unpacking gcc-14-x86-64-linux-gnu (14.2.0-19) ... Selecting previously unselected package gcc-14. Preparing to unpack .../deb/gcc-14_14.2.0-19_amd64.deb ... Unpacking gcc-14 (14.2.0-19) ... Selecting previously unselected package gcc-x86-64-linux-gnu. Preparing to unpack .../gcc-x86-64-linux-gnu_4%3a14.2.0-1_amd64.deb ... Unpacking gcc-x86-64-linux-gnu (4:14.2.0-1) ... Selecting previously unselected package gcc. Preparing to unpack .../deb/gcc_4%3a14.2.0-1_amd64.deb ... Unpacking gcc (4:14.2.0-1) ... Selecting previously unselected package g++-14-x86-64-linux-gnu. Preparing to unpack .../g++-14-x86-64-linux-gnu_14.2.0-19_amd64.deb ... Unpacking g++-14-x86-64-linux-gnu (14.2.0-19) ... Selecting previously unselected package g++-14. Preparing to unpack .../deb/g++-14_14.2.0-19_amd64.deb ... Unpacking g++-14 (14.2.0-19) ... Selecting previously unselected package g++-x86-64-linux-gnu. Preparing to unpack .../g++-x86-64-linux-gnu_4%3a14.2.0-1_amd64.deb ... Unpacking g++-x86-64-linux-gnu (4:14.2.0-1) ... Selecting previously unselected package g++. Preparing to unpack .../deb/g++_4%3a14.2.0-1_amd64.deb ... Unpacking g++ (4:14.2.0-1) ... Selecting previously unselected package libdpkg-perl. Preparing to unpack .../libdpkg-perl_1.22.21_all.deb ... Unpacking libdpkg-perl (1.22.21) ... Selecting previously unselected package patch. Preparing to unpack /opt/deb/patch_2.8-2_amd64.deb ... Unpacking patch (2.8-2) ... Selecting previously unselected package ca-certificates-java. Preparing to unpack .../ca-certificates-java_20240118_all.deb ... Unpacking ca-certificates-java (20240118) ... Selecting previously unselected package dbus-user-session. Preparing to unpack .../dbus-user-session_1.16.2-2_amd64.deb ... Unpacking dbus-user-session (1.16.2-2) ... Selecting previously unselected package libatk1.0-0t64:amd64. Preparing to unpack .../libatk1.0-0t64_2.56.2-1+deb13u1_amd64.deb ... Unpacking libatk1.0-0t64:amd64 (2.56.2-1+deb13u1) ... Selecting previously unselected package libx11-data. Preparing to unpack .../libx11-data_2%3a1.8.12-1_all.deb ... Unpacking libx11-data (2:1.8.12-1) ... Selecting previously unselected package libatspi2.0-0t64:amd64. Preparing to unpack .../libatspi2.0-0t64_2.56.2-1+deb13u1_amd64.deb ... Unpacking libatspi2.0-0t64:amd64 (2.56.2-1+deb13u1) ... Selecting previously unselected package libatk-bridge2.0-0t64:amd64. Preparing to unpack .../libatk-bridge2.0-0t64_2.56.2-1+deb13u1_amd64.deb ... Unpacking libatk-bridge2.0-0t64:amd64 (2.56.2-1+deb13u1) ... Selecting previously unselected package libavahi-common-data:amd64. Preparing to unpack .../libavahi-common-data_0.8-16_amd64.deb ... Unpacking libavahi-common-data:amd64 (0.8-16) ... Selecting previously unselected package libthai-data. Preparing to unpack .../libthai-data_0.1.29-2_all.deb ... Unpacking libthai-data (0.1.29-2) ... Selecting previously unselected package libdatrie1:amd64. Preparing to unpack .../libdatrie1_0.2.13-3+b1_amd64.deb ... Unpacking libdatrie1:amd64 (0.2.13-3+b1) ... Selecting previously unselected package xkb-data. Preparing to unpack .../deb/xkb-data_2.42-1_all.deb ... Unpacking xkb-data (2.42-1) ... Selecting previously unselected package libasound2-data. Preparing to unpack .../libasound2-data_1.2.14-1_all.deb ... Unpacking libasound2-data (1.2.14-1) ... Selecting previously unselected package gir1.2-atk-1.0:amd64. Preparing to unpack .../gir1.2-atk-1.0_2.56.2-1+deb13u1_amd64.deb ... Unpacking gir1.2-atk-1.0:amd64 (2.56.2-1+deb13u1) ... Selecting previously unselected package native-architecture. Preparing to unpack .../native-architecture_0.2.6_all.deb ... Unpacking native-architecture (0.2.6) ... Selecting previously unselected package libglib2.0-data. Preparing to unpack .../libglib2.0-data_2.84.4-3~deb13u2_all.deb ... Unpacking libglib2.0-data (2.84.4-3~deb13u2) ... Selecting previously unselected package python3-packaging. Preparing to unpack .../python3-packaging_25.0-1_all.deb ... Unpacking python3-packaging (25.0-1) ... Selecting previously unselected package libatk1.0-dev:amd64. Preparing to unpack .../libatk1.0-dev_2.56.2-1+deb13u1_amd64.deb ... Unpacking libatk1.0-dev:amd64 (2.56.2-1+deb13u1) ... Selecting previously unselected package libexpat1-dev:amd64. Preparing to unpack .../libexpat1-dev_2.7.1-2_amd64.deb ... Unpacking libexpat1-dev:amd64 (2.7.1-2) ... Selecting previously unselected package libdatrie-dev:amd64. Preparing to unpack .../libdatrie-dev_0.2.13-3+b1_amd64.deb ... Unpacking libdatrie-dev:amd64 (0.2.13-3+b1) ... Selecting previously unselected package libdeflate-dev:amd64. Preparing to unpack .../libdeflate-dev_1.23-2_amd64.deb ... Unpacking libdeflate-dev:amd64 (1.23-2) ... Selecting previously unselected package libperl-dev:amd64. Preparing to unpack .../libperl-dev_5.40.1-6_amd64.deb ... Unpacking libperl-dev:amd64 (5.40.1-6) ... Selecting previously unselected package libpython3.13:amd64. Preparing to unpack .../libpython3.13_3.13.5-2_amd64.deb ... Unpacking libpython3.13:amd64 (3.13.5-2) ... Selecting previously unselected package libpython3.13-dev:amd64. Preparing to unpack .../libpython3.13-dev_3.13.5-2_amd64.deb ... Unpacking libpython3.13-dev:amd64 (3.13.5-2) ... Selecting previously unselected package libpython3-dev:amd64. Preparing to unpack .../libpython3-dev_3.13.5-1_amd64.deb ... Unpacking libpython3-dev:amd64 (3.13.5-1) ... Selecting previously unselected package libssl-dev:amd64. Preparing to unpack .../libssl-dev_3.5.4-1~deb13u1_amd64.deb ... Unpacking libssl-dev:amd64 (3.5.4-1~deb13u1) ... Selecting previously unselected package python3-pygments. Preparing to unpack .../python3-pygments_2.18.0+dfsg-2_all.deb ... Unpacking python3-pygments (2.18.0+dfsg-2) ... Selecting previously unselected package python3-yaml. Preparing to unpack .../python3-yaml_6.0.2-1+b2_amd64.deb ... Unpacking python3-yaml (6.0.2-1+b2) ... Selecting previously unselected package sysstat. Preparing to unpack .../deb/sysstat_12.7.5-2_amd64.deb ... Unpacking sysstat (12.7.5-2) ... Selecting previously unselected package python3-autocommand. Preparing to unpack .../python3-autocommand_2.2.2-3_all.deb ... Unpacking python3-autocommand (2.2.2-3) ... Selecting previously unselected package python3.13-dev. Preparing to unpack .../python3.13-dev_3.13.5-2_amd64.deb ... Unpacking python3.13-dev (3.13.5-2) ... Selecting previously unselected package python3-dev. Preparing to unpack .../python3-dev_3.13.5-1_amd64.deb ... Unpacking python3-dev (3.13.5-1) ... Selecting previously unselected package python3-more-itertools. Preparing to unpack .../python3-more-itertools_10.7.0-1_all.deb ... Unpacking python3-more-itertools (10.7.0-1) ... Selecting previously unselected package python3-typing-extensions. Preparing to unpack .../python3-typing-extensions_4.13.2-1_all.deb ... Unpacking python3-typing-extensions (4.13.2-1) ... Selecting previously unselected package python3-typeguard. Preparing to unpack .../python3-typeguard_4.4.2-1_all.deb ... Unpacking python3-typeguard (4.4.2-1) ... Selecting previously unselected package python3-inflect. Preparing to unpack .../python3-inflect_7.3.1-2_all.deb ... Unpacking python3-inflect (7.3.1-2) ... Selecting previously unselected package python3-jaraco.functools. Preparing to unpack .../python3-jaraco.functools_4.1.0-1_all.deb ... Unpacking python3-jaraco.functools (4.1.0-1) ... Selecting previously unselected package python3-pkg-resources. Preparing to unpack .../python3-pkg-resources_78.1.1-0.1_all.deb ... Unpacking python3-pkg-resources (78.1.1-0.1) ... Selecting previously unselected package python3-jaraco.text. Preparing to unpack .../python3-jaraco.text_4.0.0-1_all.deb ... Unpacking python3-jaraco.text (4.0.0-1) ... Selecting previously unselected package python3-zipp. Preparing to unpack .../python3-zipp_3.21.0-1_all.deb ... Unpacking python3-zipp (3.21.0-1) ... Selecting previously unselected package python3-setuptools. Preparing to unpack .../python3-setuptools_78.1.1-0.1_all.deb ... Unpacking python3-setuptools (78.1.1-0.1) ... Selecting previously unselected package python3-jaraco.context. Preparing to unpack .../python3-jaraco.context_6.0.1-1_all.deb ... Unpacking python3-jaraco.context (6.0.1-1) ... Setting up libexpat1:amd64 (2.7.1-2) ... Setting up libdbus-1-3:amd64 (1.16.2-2) ... Setting up dbus-bin (1.16.2-2) ... Setting up dbus-session-bus-common (1.16.2-2) ... Setting up dbus-daemon (1.16.2-2) ... Setting up dbus-system-bus-common (1.16.2-2) ... Setting up dbus (1.16.2-2) ... Setting up perl-modules-5.40 (5.40.1-6) ... Setting up libatomic1:amd64 (14.2.0-19) ... Setting up libdeflate0:amd64 (1.23-2) ... Setting up at-spi2-common (2.56.2-1+deb13u1) ... Setting up libquadmath0:amd64 (14.2.0-19) ... Setting up patch (2.8-2) ... Setting up libx11-data (2:1.8.12-1) ... Setting up libavahi-common-data:amd64 (0.8-16) ... Setting up libthai-data (0.1.29-2) ... Setting up libdatrie1:amd64 (0.2.13-3+b1) ... Setting up xkb-data (2.42-1) ... Setting up libasound2-data (1.2.14-1) ... Setting up native-architecture (0.2.6) ... Setting up libglib2.0-data (2.84.4-3~deb13u2) ... Setting up libdeflate-dev:amd64 (1.23-2) ... Setting up openssl-provider-legacy (3.5.4-1~deb13u1) ... Setting up libssl3t64:amd64 (3.5.4-1~deb13u1) ... Setting up openssl (3.5.4-1~deb13u1) ... Setting up ca-certificates (20250419) ... Setting up ca-certificates-java (20240118) ... No JRE found. Skipping Java certificates setup. Setting up libssl-dev:amd64 (3.5.4-1~deb13u1) ... Setting up libpython3.13-minimal:amd64 (3.13.5-2) ... Setting up python3.13-minimal (3.13.5-2) ... Setting up python3-minimal (3.13.5-1) ... Setting up python3 (3.13.5-1) ... running python rtupdate hooks for python3.13... Setting up python3-ntp (1.2.3+dfsg1-8) ... Setting up ntpsec-ntpdate (1.2.3+dfsg1-8) ... Setting up ntpdate (1:4.2.8p15+dfsg-2~1.2.2+dfsg1-1+deb12u1) ... Setting up gawk (1:5.2.1-2+b1) ... Setting up libgdbm-compat4t64:amd64 (1.24-2) ... Setting up libperl5.40:amd64 (5.40.1-6) ... Setting up perl (5.40.1-6) ... Setting up gtk-update-icon-cache (4.18.6+ds-2) ... Setting up libgcc-14-dev:amd64 (14.2.0-19) ... Setting up gcc-14-x86-64-linux-gnu (14.2.0-19) ... Setting up gcc-14 (14.2.0-19) ... Setting up gcc-x86-64-linux-gnu (4:14.2.0-1) ... Setting up gcc (4:14.2.0-1) ... Setting up g++-14-x86-64-linux-gnu (14.2.0-19) ... Setting up g++-14 (14.2.0-19) ... Setting up g++-x86-64-linux-gnu (4:14.2.0-1) ... Setting up g++ (4:14.2.0-1) ... update-alternatives: using /usr/bin/g++ to provide /usr/bin/c++ (c++) in auto mode Setting up libdpkg-perl (1.22.21) ... Setting up dbus-user-session (1.16.2-2) ... Setting up libatk1.0-0t64:amd64 (2.56.2-1+deb13u1) ... Setting up libatspi2.0-0t64:amd64 (2.56.2-1+deb13u1) ... Setting up libatk-bridge2.0-0t64:amd64 (2.56.2-1+deb13u1) ... Setting up gir1.2-atk-1.0:amd64 (2.56.2-1+deb13u1) ... Setting up python3-packaging (25.0-1) ... Setting up libatk1.0-dev:amd64 (2.56.2-1+deb13u1) ... Setting up libexpat1-dev:amd64 (2.7.1-2) ... Setting up libdatrie-dev:amd64 (0.2.13-3+b1) ... Setting up libperl-dev:amd64 (5.40.1-6) ... Setting up libpython3.13:amd64 (3.13.5-2) ... Setting up libpython3.13-dev:amd64 (3.13.5-2) ... Setting up libpython3-dev:amd64 (3.13.5-1) ... Setting up python3-pygments (2.18.0+dfsg-2) ... Setting up python3-yaml (6.0.2-1+b2) ... Setting up sysstat (12.7.5-2) ... Setting up python3-autocommand (2.2.2-3) ... Setting up python3.13-dev (3.13.5-2) ... Setting up python3-dev (3.13.5-1) ... Setting up python3-more-itertools (10.7.0-1) ... Setting up python3-typing-extensions (4.13.2-1) ... Setting up python3-typeguard (4.4.2-1) ... Setting up python3-inflect (7.3.1-2) ... Setting up python3-jaraco.functools (4.1.0-1) ... Setting up python3-pkg-resources (78.1.1-0.1) ... Setting up python3-jaraco.text (4.0.0-1) ... Setting up python3-zipp (3.21.0-1) ... Setting up python3-setuptools (78.1.1-0.1) ... Setting up python3-jaraco.context (6.0.1-1) ... Setting up libpython3.13-stdlib:amd64 (3.13.5-2) ... Setting up python3.13 (3.13.5-2) ... Setting up libpython3-stdlib:amd64 (3.13.5-1) ... Processing triggers for libc-bin (2.41-12) ... Processing triggers for systemd (257.8-1~deb13u2) ... Processing triggers for ca-certificates (20250419) ... Updating certificates in /etc/ssl/certs... 0 added, 0 removed; done. Running hooks in /etc/ca-certificates/update.d... done. Processing triggers for ca-certificates-java (20240118) ... No JRE found. Skipping Java certificates setup. dpkg: regarding .../python3-minimal_3.13.5-1_amd64.deb containing python3-minimal, pre-dependency problem: python3-minimal pre-depends on python3.13-minimal (>= 3.13.5-1~) python3.13-minimal is unpacked, but has never been configured. dpkg: warning: ignoring pre-dependency problem! dpkg: regarding .../deb/python3_3.13.5-1_amd64.deb containing python3, pre-dependency problem: python3 pre-depends on python3-minimal (= 3.13.5-1) python3-minimal is unpacked, but has never been configured. dpkg: warning: ignoring pre-dependency problem! dpkg: regarding .../gawk_1%3a5.2.1-2+b1_amd64.deb containing gawk, pre-dependency problem: gawk pre-depends on libmpfr6 (>= 3.1.3) libmpfr6 is not installed. dpkg: warning: ignoring pre-dependency problem! dpkg: regarding .../gawk_1%3a5.2.1-2+b1_amd64.deb containing gawk, pre-dependency problem: gawk pre-depends on libsigsegv2 (>= 2.9) libsigsegv2 is not installed. dpkg: warning: ignoring pre-dependency problem! Creating group 'messagebus' with GID 991. Creating user 'messagebus' (System Message Bus) with UID 991 and GID 991. invoke-rc.d: policy-rc.d denied execution of start. /usr/sbin/policy-rc.d returned 101, not running 'start dbus.service' debconf: unable to initialize frontend: Dialog debconf: (TERM is not set, so the dialog frontend is not usable.) debconf: falling back to frontend: Readline debconf: unable to initialize frontend: Readline debconf: (This frontend requires a controlling tty.) debconf: falling back to frontend: Teletype debconf: unable to initialize frontend: Teletype debconf: (This frontend requires a controlling tty.) debconf: falling back to frontend: Noninteractive Updating certificates in /etc/ssl/certs... 150 added, 0 removed; done. dpkg: python3: dependency problems, but configuring anyway as you requested: python3 depends on python3.13 (>= 3.13.5-1~). python3 depends on libpython3-stdlib (= 3.13.5-1). Traceback (most recent call last): File "/usr/bin/py3clean", line 209, in main() ~~~~^^ File "/usr/bin/py3clean", line 195, in main pfiles = set(dpf.from_package(options.package)) File "/usr/share/python3/debpython/files.py", line 55, in from_package raise Exception("cannot get content of %s" % package_name) Exception: cannot get content of libgio-2.0-dev-bin error running python rtupdate hook libgio-2.0-dev-bin dpkg: error processing package python3 (--install): installed python3 package post-installation script subprocess returned error exit status 4 dpkg: python3-ntp: dependency problems, but configuring anyway as you requested: python3-ntp depends on python3; however: Package python3 is not configured yet. python3-ntp depends on python3:any; however: Package python3 is not configured yet. dpkg: ntpsec-ntpdate: dependency problems, but configuring anyway as you requested: ntpsec-ntpdate depends on netbase; however: Package netbase is not installed. ntpsec-ntpdate depends on ntpsec-ntpdig (= 1.2.3+dfsg1-8); however: Package ntpsec-ntpdig is not installed. dpkg: gawk: dependency problems, but configuring anyway as you requested: gawk depends on libmpfr6 (>= 3.1.3); however: Package libmpfr6 is not installed. gawk depends on libsigsegv2 (>= 2.9); however: Package libsigsegv2 is not installed. dpkg: libgdbm-compat4t64:amd64: dependency problems, but configuring anyway as you requested: libgdbm-compat4t64:amd64 depends on libgdbm6t64 (>= 1.16); however: Package libgdbm6t64 is not installed. dpkg: libperl5.40:amd64: dependency problems, but configuring anyway as you requested: libperl5.40:amd64 depends on libgdbm6t64 (>= 1.21); however: Package libgdbm6t64 is not installed. dpkg: gtk-update-icon-cache: dependency problems, but configuring anyway as you requested: gtk-update-icon-cache depends on libgdk-pixbuf-2.0-0 (>= 2.22.0); however: Package libgdk-pixbuf-2.0-0 is not installed. gtk-update-icon-cache depends on libglib2.0-0t64 (>= 2.80.0); however: Package libglib2.0-0t64 is not installed. dpkg: libgcc-14-dev:amd64: dependency problems, but configuring anyway as you requested: libgcc-14-dev:amd64 depends on libgomp1 (>= 14.2.0-19); however: Package libgomp1 is not installed. libgcc-14-dev:amd64 depends on libitm1 (>= 14.2.0-19); however: Package libitm1 is not installed. libgcc-14-dev:amd64 depends on libasan8 (>= 14.2.0-19); however: Package libasan8 is not installed. libgcc-14-dev:amd64 depends on liblsan0 (>= 14.2.0-19); however: Package liblsan0 is not installed. libgcc-14-dev:amd64 depends on libtsan2 (>= 14.2.0-19); however: Package libtsan2 is not installed. libgcc-14-dev:amd64 depends on libubsan1 (>= 14.2.0-19); however: Package libubsan1 is not installed. libgcc-14-dev:amd64 depends on libhwasan0 (>= 14.2.0-19); however: Package libhwasan0 is not installed. dpkg: gcc-14-x86-64-linux-gnu: dependency problems, but configuring anyway as you requested: gcc-14-x86-64-linux-gnu depends on cpp-14-x86-64-linux-gnu (= 14.2.0-19); however: Package cpp-14-x86-64-linux-gnu is not installed. gcc-14-x86-64-linux-gnu depends on libcc1-0 (>= 14.2.0-19); however: Package libcc1-0 is not installed. gcc-14-x86-64-linux-gnu depends on binutils-x86-64-linux-gnu (>= 2.39); however: Package binutils-x86-64-linux-gnu is not installed. gcc-14-x86-64-linux-gnu depends on libisl23 (>= 0.15); however: Package libisl23 is not installed. gcc-14-x86-64-linux-gnu depends on libmpc3 (>= 1.1.0); however: Package libmpc3 is not installed. gcc-14-x86-64-linux-gnu depends on libmpfr6 (>= 3.1.3); however: Package libmpfr6 is not installed. dpkg: gcc-14: dependency problems, but configuring anyway as you requested: gcc-14 depends on cpp-14 (= 14.2.0-19); however: Package cpp-14 is not installed. gcc-14 depends on binutils (>= 2.39); however: Package binutils is not installed. dpkg: gcc-x86-64-linux-gnu: dependency problems, but configuring anyway as you requested: gcc-x86-64-linux-gnu depends on cpp-x86-64-linux-gnu (= 4:14.2.0-1); however: Package cpp-x86-64-linux-gnu is not installed. dpkg: gcc: dependency problems, but configuring anyway as you requested: gcc depends on cpp (= 4:14.2.0-1); however: Package cpp is not installed. gcc depends on cpp-x86-64-linux-gnu (= 4:14.2.0-1); however: Package cpp-x86-64-linux-gnu is not installed. dpkg: g++-14-x86-64-linux-gnu: dependency problems, but configuring anyway as you requested: g++-14-x86-64-linux-gnu depends on libstdc++-14-dev (= 14.2.0-19); however: Package libstdc++-14-dev is not installed. g++-14-x86-64-linux-gnu depends on libisl23 (>= 0.15); however: Package libisl23 is not installed. g++-14-x86-64-linux-gnu depends on libmpc3 (>= 1.1.0); however: Package libmpc3 is not installed. g++-14-x86-64-linux-gnu depends on libmpfr6 (>= 3.1.3); however: Package libmpfr6 is not installed. dpkg: g++-x86-64-linux-gnu: dependency problems, but configuring anyway as you requested: g++-x86-64-linux-gnu depends on cpp-x86-64-linux-gnu (= 4:14.2.0-1); however: Package cpp-x86-64-linux-gnu is not installed. dpkg: g++: dependency problems, but configuring anyway as you requested: g++ depends on cpp (= 4:14.2.0-1); however: Package cpp is not installed. g++ depends on cpp-x86-64-linux-gnu (= 4:14.2.0-1); however: Package cpp-x86-64-linux-gnu is not installed. dpkg: dbus-user-session: dependency problems, but configuring anyway as you requested: dbus-user-session depends on libpam-systemd; however: Package libpam-systemd is not installed. dpkg: libatk1.0-0t64:amd64: dependency problems, but configuring anyway as you requested: libatk1.0-0t64:amd64 depends on libglib2.0-0t64 (>= 2.80.0); however: Package libglib2.0-0t64 is not installed. dpkg: libatspi2.0-0t64:amd64: dependency problems, but configuring anyway as you requested: libatspi2.0-0t64:amd64 depends on libglib2.0-0t64 (>= 2.80.0); however: Package libglib2.0-0t64 is not installed. libatspi2.0-0t64:amd64 depends on libx11-6 (>= 2:1.2.99.901); however: Package libx11-6 is not installed. libatspi2.0-0t64:amd64 depends on libxi6 (>= 2:1.2.99.4); however: Package libxi6 is not installed. dpkg: libatk-bridge2.0-0t64:amd64: dependency problems, but configuring anyway as you requested: libatk-bridge2.0-0t64:amd64 depends on libglib2.0-0t64 (>= 2.80.0); however: Package libglib2.0-0t64 is not installed. dpkg: gir1.2-atk-1.0:amd64: dependency problems, but configuring anyway as you requested: gir1.2-atk-1.0:amd64 depends on gir1.2-gobject-2.0; however: Package gir1.2-gobject-2.0 is not installed. dpkg: python3-packaging: dependency problems, but configuring anyway as you requested: python3-packaging depends on python3:any; however: Package python3 is not configured yet. dpkg: libatk1.0-dev:amd64: dependency problems, but configuring anyway as you requested: libatk1.0-dev:amd64 depends on gir1.2-gobject-2.0-dev; however: Package gir1.2-gobject-2.0-dev is not installed. libatk1.0-dev:amd64 depends on pkgconf; however: Package pkgconf is not installed. libatk1.0-dev:amd64 depends on libglib2.0-dev; however: Package libglib2.0-dev is not installed. dpkg: libexpat1-dev:amd64: dependency problems, but configuring anyway as you requested: libexpat1-dev:amd64 depends on libc6-dev | libc-dev; however: Package libc6-dev is not installed. Package libc-dev is not installed. dpkg: libdatrie-dev:amd64: dependency problems, but configuring anyway as you requested: libdatrie-dev:amd64 depends on pkgconf; however: Package pkgconf is not installed. dpkg: libperl-dev:amd64: dependency problems, but configuring anyway as you requested: libperl-dev:amd64 depends on libc6-dev | libc-dev; however: Package libc6-dev is not installed. Package libc-dev is not installed. dpkg: libpython3.13:amd64: dependency problems, but configuring anyway as you requested: libpython3.13:amd64 depends on libpython3.13-stdlib (= 3.13.5-2). dpkg: libpython3.13-dev:amd64: dependency problems, but configuring anyway as you requested: libpython3.13-dev:amd64 depends on libpython3.13-stdlib (= 3.13.5-2). libpython3.13-dev:amd64 depends on zlib1g-dev; however: Package zlib1g-dev is not installed. md-binfmt.servic[ 155.387524][ T262] dditional Binary[ 155.403039][ T262] Package python3 is not configured yet. dpkg: python3-yaml: dependency problems, but configuring anyway as you requested: python3-yaml depends on python3 (<< 3.14); however: Package python3 is not configured yet. python3-yaml depends on python3 (>= 3.13~); however: Package python3 is not configured yet. python3-yaml depends on python3:any; however: 1;39msystemd-bin[ 155.500835][ T262] python3-yaml depends on libyaml-0-2; however: - Set Up Additio[ 155.511716][ T262] Package libyaml-0-2 is not installed. nal Binary Forma[ 155.511730][ T262] dpkg: sysstat: dependency problems, but configuring anyway as you requested: Startin[ 155.540229][ T262] sysstat depends on xz-utils; however: md-binfmt.servic[ 155.551146][ T262] Package xz-utils is not installed. dditional Binary[ 155.561822][ T262] sysstat depends on libsensors5 (>= 1:3.5.0); however: Package libsensors5 is not installed. debconf: unable to initialize frontend: Dialog debconf: (TERM is not set, so the dialog frontend is not usable.) debconf: falling back to frontend: Readline debconf: unable to initialize frontend: Readline debconf: (This frontend requires a controlling tty.) ;1;39msystemd-bi[ 155.648750][ T262] debconf: unable to initialize frontend: Teletype - Set Up Additi[ 155.660179][ T262] debconf: (This frontend requires a controlling tty.) onal Binary Form[ 155.660193][ T262] debconf: falling back to frontend: Noninteractive Creating config file /etc/default/sysstat with new version update-alternatives: using /usr/bin/sar.sysstat to provide /usr/bin/sar (sar) in auto mode update-alternatives: warning: skip creation of /usr/share/man/man1/sar.1.gz because associated file /usr/share/man/man1/sar.sysstat.1.gz (of link group sar) doesn't exist dpkg: python3-autocommand: dependency problems, but configuring anyway as you requested: python3-autocommand depends on python3:any; however: Package python3 is not configured yet. dpkg: python3.13-dev: dependency problems, but configuring anyway as you requested: python3.13-dev depends on python3.13 (= 3.13.5-2). dpkg: python3-dev: dependency problems, but configuring anyway as you requested: python3-dev depends on python3 (= 3.13.5-1); however: Package python3 is not configured yet. python3-dev depends on libjs-sphinxdoc (>= 8.1); however: Package libjs-sphinxdoc is not installed. dpkg: python3-more-itertools: dependency problems, but configuring anyway as you requested: python3-more-itertools depends on python3:any; however: Package python3 is not configured yet. dpkg: python3-typing-extensions: dependency problems, but configuring anyway as you requested: python3-typing-extensions depends on python3:any; however: Package python3 is not configured yet. dpkg: python3-typeguard: dependency problems, but configuring anyway as you requested: python3-typeguard depends on python3-importlib-metadata | python3-supported-min (>= 3.10); however: Package python3-importlib-metadata is not installed. Package python3-supported-min is not installed. Package python3 which provides python3-supported-min is not configured yet. python3-typeguard depends on python3:any; however: Package python3 is not configured yet. dpkg: python3-inflect: dependency problems, but configuring anyway as you requested: python3-inflect depends on python3:any; however: Package python3 is not configured yet. dpkg: python3-jaraco.functools: dependency problems, but configuring anyway as you requested: python3-jaraco.functools depends on python3:any; however: Package python3 is not configured yet. dpkg: python3-pkg-resources: dependency problems, but configuring anyway as you requested: python3-pkg-resources depends on python3:any; however: Package python3 is not configured yet. dpkg: python3-jaraco.text: dependency problems, but configuring anyway as you requested: python3-jaraco.text depends on python3-importlib-resources | python3-supported-min (>= 3.9); however: Package python3-importlib-resources is not installed. Package python3-supported-min is not installed. Package python3 which provides python3-supported-min is not configured yet. python3-jaraco.text depends on python3:any; however: Package python3 is not configured yet. dpkg: python3-zipp: dependency problems, but configuring anyway as you requested: python3-zipp depends on python3:any; however: Package python3 is not configured yet. dpkg: python3-setuptools: dependency problems, but configuring anyway as you requested: python3-setuptools depends on python3-importlib-metadata | python3-supported-min (>= 3.10); however: Package python3-importlib-metadata is not installed. Package python3-supported-min is not installed. Package python3 which provides python3-supported-min is not configured yet. python3-setuptools depends on python3:any; however: Package python3 is not configured yet. dpkg: python3-jaraco.context: dependency problems, but configuring anyway as you requested: python3-jaraco.context depends on python3:any; however: Package python3 is not configured yet. dpkg: libpython3.13-stdlib:amd64: dependency problems, but configuring anyway as you requested: libpython3.13-stdlib:amd64 depends on media-types | mime-support; however: Package media-types is not installed. Package mime-support is not installed. BTRFS: device fsid 735edf52-7630-4279-855c-d0ffca2bc3cc devid 1 transid 11 /dev/sdb1 (8:17) scanned by mount (4568) libpython3.13-stdlib:amd64 depends on netbase; however: BTRFS info (device sdb1): first mount of filesystem 735edf52-7630-4279-855c-d0ffca2bc3cc Package netbase is not installed. BTRFS info (device sdb1): using crc32c checksum algorithm dpkg: python3.13: dependency problems, but configuring anyway as you requested: BTRFS info (device sdb1): enabling ssd optimizations python3.13 depends on media-types | mime-support; however: BTRFS info (device sdb1): turning on async discard BTRFS info (device sdb1): enabling free space tree Package media-types is not installed. Package mime-support is not installed. Errors were encountered while processing: python3 LKP: ttyS0: 227:[ 159.130999][ T262] handle /opt/deb/keep-deb.hw... /lkp/lkp/src/b[ 159.131013][ T262] in/run-lkp /lkp/jobs/scheduled/l[ 159.142340][ T262] install debs round two: dpkg -i --force-confdef --force-depends /opt/deb/libexpat1_2.7.1-2_amd64.deb kp-skl-d02/perf-[ 159.142354][ T262] stat-tests-defaults-debian-13-x8[ 159.158908][ T262] (Reading database ... 15124 files and directories currently installed.) 6_64-20250902.cg[ 159.158923][ T262] z-5e4b47fd150c-2[ 159.173241][ T262] Preparing to unpack .../libexpat1_2.7.1-2_amd64.deb ... 0260312-3836505-[ 159.173255][ T262] b2g5sk-5.yaml Unpacking libexpat1:amd64 (2.7.1-2) over (2.7.1-2) ... Setting up libexpat1:amd64 (2.7.1-2) ... Processing triggers for libc-bin (2.41-12) ... install debs round two: dpkg -i --force-confdef --force-depends /opt/deb/libpython3.13-minimal_3.13.5-2_amd64.deb (Reading database ... 15124 files and directories currently installed.) Preparing to unpack .../libpython3.13-minimal_3.13.5-2_amd64.deb ... Unpacking libpython3.13-minimal:amd64 (3.13.5-2) over (3.13.5-2) ... Setting up libpython3.13-minimal:amd64 (3.13.5-2) ... install debs round two: dpkg -i --force-confdef --force-depends /opt/deb/python3.13-minimal_3.13.5-2_amd64.deb (Reading database ... 15124 files and directories currently installed.) Preparing to unpack .../python3.13-minimal_3.13.5-2_amd64.deb ... Unpacking python3.13-minimal (3.13.5-2) over (3.13.5-2) ... Setting up python3.13-minimal (3.13.5-2) ... Processing triggers for systemd (257.8-1~deb13u2) ... install debs round two: dpkg -i --force-confdef --force-depends /opt/deb/python3-minimal_3.13.5-1_amd64.deb (Reading database ... 15124 files and directories currently installed.) Preparing to unpack .../python3-minimal_3.13.5-1_amd64.deb ... Unpacking python3-minimal (3.13.5-1) over (3.13.5-1) ... Setting up python3-minimal (3.13.5-1) ... install debs round two: dpkg -i --force-confdef --force-depends /opt/deb/libpython3.13-stdlib_3.13.5-2_amd64.deb (Reading database ... 15124 files and directories currently installed.) Preparing to unpack .../libpython3.13-stdlib_3.13.5-2_amd64.deb ... Unpacking libpython3.13-stdlib:amd64 (3.13.5-2) over (3.13.5-2) ... Setting up libpython3.13-stdlib:amd64 (3.13.5-2) ... install debs round two: dpkg -i --force-confdef --force-depends /opt/deb/python3.13_3.13.5-2_amd64.deb (Reading database ... 15124 files and directories currently installed.) Preparing to unpack .../python3.13_3.13.5-2_amd64.deb ... Unpacking python3.13 (3.13.5-2) over (3.13.5-2) ... Setting up python3.13 (3.13.5-2) ... install debs round two: dpkg -i --force-confdef --force-depends /opt/deb/libpython3-stdlib_3.13.5-1_amd64.deb (Reading database ... 15124 files and directories currently installed.) Preparing to unpack .../libpython3-stdlib_3.13.5-1_amd64.deb ... Unpacking libpython3-stdlib:amd64 (3.13.5-1) over (3.13.5-1) ... Setting up libpython3-stdlib:amd64 (3.13.5-1) ... install debs round two: dpkg -i --force-confdef --force-depends /opt/deb/python3_3.13.5-1_amd64.deb (Reading database ... 15124 files and directories currently installed.) Preparing to unpack .../deb/python3_3.13.5-1_amd64.deb ... running python pre-rtupdate hooks for python3.13... Unpacking python3 (3.13.5-1) over (3.13.5-1) ... Setting up python3 (3.13.5-1) ... running python rtupdate hooks for python3.13... Traceback (most recent call last): File "/usr/bin/py3clean", line 209, in main() ~~~~^^ File "/usr/bin/py3clean", line 195, in main pfiles = set(dpf.from_package(options.package)) File "/usr/share/python3/debpython/files.py", line 55, in from_package raise Exception("cannot get content of %s" % package_name) Exception: cannot get content of libgio-2.0-dev-bin error running python rtupdate hook libgio-2.0-dev-bin dpkg: error processing package python3 (--install): installed python3 package post-installation script subprocess returned error exit status 4 Errors were encountered while processing: python3 NO_NETWORK= CLOCK: time stepped by -80378.708467 2026-03-12 15:09:58.902693 (+0000) -80378.708467 +/- 0.002470 internal-lkp-server 192.168.1.200 s5 no-leap INFO: lkp CACHE_DIR is /opt/rootfs/tmp LKP: stdout: 227: /lkp/lkp/src/bin/run-lkp /lkp/jobs/scheduled/lkp-skl-d02/perf-stat-tests-defaults-debian-13-x86_64-20250902.cgz-5e4b47fd150c-20260312-3836505-b2g5sk-5.yaml RESULT_ROOT=/result/perf-stat-tests/defaults/lkp-skl-d02/debian-13-x86_64-20250902.cgz/x86_64-rhel-9.4-bpf/gcc-14/5e4b47fd150c2ab74396945eae895ed419505daa/0 job=/lkp/jobs/scheduled/lkp-skl-d02/perf-stat-tests-defaults-debian-13-x86_64-20250902.cgz-5e4b47fd150c-20260312-3836505-b2g5sk-5.yaml LKP: ttyS0: 4588: current_version: f0, target_version: f0 x86/PAT: bmc-watchdog:4677 map pfn expected mapping type uncached-minus for [mem 0x00000000-0x00000fff], got write-back x86/PAT: bmc-watchdog:4677 map pfn expected mapping type uncached-minus for [mem 0x872dd000-0x872ddfff], got write-back x86/PAT: bmc-watchdog:4677 map pfn expected mapping type uncached-minus for [mem 0x872dd000-0x872ddfff], got write-back x86/PAT: bmc-watchdog:4677 map pfn expected mapping type uncached-minus for [mem 0x00000000-0x00000fff], got write-back x86/PAT: bmc-watchdog:4677 map pfn expected mapping type uncached-minus for [mem 0x872dd000-0x872ddfff], got write-back x86/PAT: bmc-watchdog:4677 map pfn expected mapping type uncached-minus for [mem 0x872dd000-0x872ddfff], got write-back x86/PAT: bmc-watchdog:4677 map pfn expected mapping type uncached-minus for [mem 0x00000000-0x00000fff], got write-back x86/PAT: bmc-watchdog:4677 map pfn expected mapping type uncached-minus for [mem 0x872dd000-0x872ddfff], got write-back x86/PAT: bmc-watchdog:4677 map pfn expected mapping type uncached-minus for [mem 0x872dd000-0x872ddfff], got write-back x86/PAT: bmc-watchdog:4677 map pfn expected mapping type uncached-minus for [mem 0x00000000-0x00000fff], got write-back x86/PAT: bmc-watchdog:4677 map pfn expected mapping type uncached-minus for [mem 0x872dd000-0x872ddfff], got write-back x86/PAT: bmc-watchdog:4677 map pfn expected mapping type uncached-minus for [mem 0x872dd000-0x872ddfff], got write-back x86/PAT: bmc-watchdog:4677 map pfn expected mapping type uncached-minus for [mem 0x00000000-0x00000fff], got write-back x86/PAT: bmc-watchdog:4677 map pfn expected mapping type uncached-minus for [mem 0x872dd000-0x872ddfff], got write-back x86/PAT: bmc-watchdog:4677 map pfn expected mapping type uncached-minus for [mem 0x872dd000-0x872ddfff], got write-back x86/PAT: bmc-watchdog:4677 map pfn expected mapping type uncached-minus for [mem 0x00000000-0x00000fff], got write-back x86/PAT: bmc-watchdog:4677 map pfn expected mapping type uncached-minus for [mem 0x872dd000-0x872ddfff], got write-back x86/PAT: bmc-watchdog:4677 map pfn expected mapping type uncached-minus for [mem 0x872dd000-0x872ddfff], got write-back x86/PAT: bmc-watchdog:4677 map pfn expected mapping type uncached-minus for [mem 0x00000000-0x00000fff], got write-back x86/PAT: bmc-watchdog:4677 map pfn expected mapping type uncached-minus for [mem 0x872dd000-0x872ddfff], got write-back x86/PAT: bmc-watchdog:4677 map pfn expected mapping type uncached-minus for [mem 0x872dd000-0x872ddfff], got write-back x86/PAT: bmc-watchdog:4677 map pfn expected mapping type uncached-minus for [mem 0x00000000-0x00000fff], got write-back x86/PAT: bmc-watchdog:4677 map pfn expected mapping type uncached-minus for [mem 0x872dd000-0x872ddfff], got write-back x86/PAT: bmc-watchdog:4677 map pfn expected mapping type uncached-minus for [mem 0x872dd000-0x872ddfff], got write-back x86/PAT: bmc-watchdog:4677 map pfn expected mapping type uncached-minus for [mem 0x00000000-0x00000fff], got write-back x86/PAT: bmc-watchdog:4677 map pfn expected mapping type uncached-minus for [mem 0x872dd000-0x872ddfff], got write-back x86/PAT: bmc-watchdog:4677 map pfn expected mapping type uncached-minus for [mem 0x872dd000-0x872ddfff], got write-back x86/PAT: bmc-watchdog:4677 map pfn expected mapping type uncached-minus for [mem 0x00000000-0x00000fff], got write-back x86/PAT: bmc-watchdog:4677 map pfn expected mapping type uncached-minus for [mem 0x872dd000-0x872ddfff], got write-back x86/PAT: bmc-watchdog:4677 map pfn expected mapping type uncached-minus for [mem 0x872dd000-0x872ddfff], got write-back x86/PAT: bmc-watchdog:4677 map pfn expected mapping type uncached-minus for [mem 0x00000000-0x00000fff], got write-back x86/PAT: bmc-watchdog:4677 map pfn expected mapping type uncached-minus for [mem 0x872dd000-0x872ddfff], got write-back x86/PAT: bmc-watchdog:4677 map pfn expected mapping type uncached-minus for [mem 0x872dd000-0x872ddfff], got write-back x86/PAT: bmc-watchdog:4677 map pfn expected mapping type uncached-minus for [mem 0x00000000-0x00000fff], got write-back x86/PAT: bmc-watchdog:4677 map pfn expected mapping type uncached-minus for [mem 0x872dd000-0x872ddfff], got write-back x86/PAT: bmc-watchdog:4677 map pfn expected mapping type uncached-minus for [mem 0x872dd000-0x872ddfff], got write-back x86/PAT: bmc-watchdog:4677 map pfn expected mapping type uncached-minus for [mem 0x00000000-0x00000fff], got write-back x86/PAT: bmc-watchdog:4677 map pfn expected mapping type uncached-minus for [mem 0x872dd000-0x872ddfff], got write-back x86/PAT: bmc-watchdog:4677 map pfn expected mapping type uncached-minus for [mem 0x872dd000-0x872ddfff], got write-back x86/PAT: bmc-watchdog:4677 map pfn expected mapping type uncached-minus for [mem 0x00000000-0x00000fff], got write-back x86/PAT: bmc-watchdog:4677 map pfn expected mapping type uncached-minus for [mem 0x872dd000-0x872ddfff], got write-back x86/PAT: bmc-watchdog:4677 map pfn expected mapping type uncached-minus for [mem 0x872dd000-0x872ddfff], got write-back x86/PAT: bmc-watchdog:4677 map pfn expected mapping type uncached-minus for [mem 0x00000000-0x00000fff], got write-back x86/PAT: bmc-watchdog:4677 map pfn expected mapping type uncached-minus for [mem 0x872dd000-0x872ddfff], got write-back x86/PAT: bmc-watchdog:4677 map pfn expected mapping type uncached-minus for [mem 0x872dd000-0x872ddfff], got write-back error: dpkg -i /opt/deb/python3_3.13.5-1_amd64.deb failed. result_service: raw_upload, RESULT_MNT: /internal-lkp-server/result, RESULT_ROOT: /internal-lkp-server/result/perf-stat-tests/defaults/lkp-skl-d02/debian-13-x86_64-20250902.cgz/x86_64-rhel-9.4-bpf/gcc-14/5e4b47fd150c2ab74396945eae895ed419505daa/0, TMP_RESULT_ROOT: /tmp/lkp/result run-job /lkp/jobs/scheduled/lkp-skl-d02/perf-stat-tests-defaults-debian-13-x86_64-20250902.cgz-5e4b47fd150c-20260312-3836505-b2g5sk-5.yaml /usr/bin/wget -q --timeout=3600 --tries=1 --local-encoding=UTF-8 http://internal-lkp-server:80/~lkp/cgi-bin/lkp-jobfile-append-var?job_file=/lkp/jobs/scheduled/lkp-skl-d02/perf-stat-tests-defaults-debian-13-x86_64-20250902.cgz-5e4b47fd150c-20260312-3836505-b2g5sk-5.yaml&job_state=running -O /dev/null target ucode: 0xf0 LKP: stdout: 4588: current_version: f0, target_version: f0 check_nr_cpu CPU(s): 4 On-line CPU(s) list: 0-3 Model name: Intel(R) Core(TM) i5-6500 CPU @ 3.20GHz Thread(s) per core: 1 Core(s) per socket: 4 Socket(s): 1 CPU(s) scaling MHz: 94% NUMA node(s): 1 NUMA node0 CPU(s): 0-3 cpu_info: GenuineIntel-6-5E GenuineIntel-6-5E gcc march setting is skylake valid Makefile.config:715: Warning: Disabled BPF skeletons as clang (clang) is missing Makefile.config:1159: Rust is not found. Test workloads with rust are disabled. PERF_VERSION = 7.0.0-rc2 watchdog: BUG: soft lockup - CPU#1 stuck for 22s! [make:6528] Modules linked in: btrfs intel_rapl_msr intel_rapl_common libblake2b xor zstd_compress raid6_pq x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel platform_profile sd_mod kvm sg snd_hda_intel dell_wmi irqbypass ghash_clmulni_intel mei_wdt snd_soc_avs rfkill dell_smbios rapl dcdbas intel_cstate dell_smm_hwmon sparse_keymap wmi_bmof snd_soc_hda_codec dell_wmi_descriptor snd_hda_ext_core snd_hda_codec snd_hda_core drm_buddy snd_intel_dspcfg snd_intel_sdw_acpi ttm i2c_i801 snd_hwdep intel_uncore drm_display_helper pcspkr i2c_smbus snd_soc_core cec drm_client_lib snd_compress intel_pmc_core drm_kms_helper snd_pcm pmt_telemetry ahci pmt_discovery intel_gtt snd_timer pmt_class agpgart mei_me intel_pmc_ssram_telemetry libahci snd video acpi_pad intel_vsec mei soundcore libata intel_pch_thermal wmi binfmt_misc drm nfnetlink ip_tables x_tables sch_fq_codel irq event stamp: 44440 hardirqs last enabled at (44439): [] asm_sysvec_apic_timer_interrupt+0x16/0x20 hardirqs last disabled at (44440): [] sysvec_apic_timer_interrupt+0xa/0xb0 softirqs last enabled at (44380): [] handle_softirqs+0x45f/0x530 softirqs last disabled at (44375): [] __irq_exit_rcu+0x111/0x130 CPU: 1 UID: 0 PID: 6528 Comm: make Tainted: G S I 7.0.0-rc2-00273-g5e4b47fd150c #1 PREEMPT(full) Tainted: [S]=CPU_OUT_OF_SPEC, [I]=FIRMWARE_WORKAROUND Hardware name: Dell Inc. OptiPlex 7040/0Y7WYT, BIOS 1.1.1 10/07/2015 RIP: 0010:sched_mm_cid_after_execve+0x1e6/0x370 Code: 1f 49 8d 94 47 40 0b 00 00 48 89 c8 48 c1 f8 06 48 89 55 c8 48 8d 3c c2 e8 27 90 5a 00 48 8b 55 c8 48 8b 4d b8 f0 48 0f ab 0a <72> 42 48 8b 7d d0 e8 0f 7a 5a 00 45 89 ac 24 30 1b 00 00 49 8d bc RSP: 0018:ffff888805237ad0 EFLAGS: 00000247 RAX: 0000000000000001 RBX: ffff8888052a6000 RCX: 0000000000000000 RDX: ffff8888052a6b50 RSI: 0000000000000008 RDI: ffff8888052a6b50 RBP: ffff888805237b18 R08: 0000000000000001 R09: ffffed1100a54d6a R10: ffff8888052a6b57 R11: 0000000000000000 R12: ffff888805240000 R13: 0000000000000000 R14: 0000000000000001 R15: ffff8888052a6000 FS: 0000000000000000(0000) GS:ffff888815bbd000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fff149c5e49 CR3: 000000084d6a2005 CR4: 00000000003726f0 Call Trace: bprm_execve+0x137/0x1b0 do_execveat_common+0x22b/0x270 __x64_sys_execve+0x55/0x70 do_syscall_64+0x11b/0x1530 ? _raw_spin_unlock_irq+0x2f/0x70 ? __x64_sys_rt_sigprocmask+0x17f/0x270 ? __pfx___x64_sys_rt_sigprocmask+0x10/0x10 ? lock_acquire+0xac/0x230 ? do_syscall_64+0x1d5/0x1530 ? trace_hardirqs_on_prepare+0x55/0x130 ? do_syscall_64+0x1f3/0x1530 ? __lock_release+0x5d/0x1b0 ? __might_fault+0x63/0xb0 ? lock_release+0x6a/0x170 ? _copy_to_user+0x58/0x70 ? __x64_sys_rt_sigprocmask+0x196/0x270 ? __pfx___x64_sys_rt_sigprocmask+0x10/0x10 ? rcu_is_watching+0x1c/0x70 ? find_held_lock+0x2b/0xb0 ? do_syscall_64+0x1d5/0x1530 ? trace_hardirqs_on_prepare+0x55/0x130 ? do_syscall_64+0x1f3/0x1530 ? find_held_lock+0x2b/0xb0 ? exc_page_fault+0x6a/0xf0 ? __lock_release+0x5d/0x1b0 ? handle_mm_fault+0x270/0x3f0 ? exc_page_fault+0x6a/0xf0 ? lock_release+0x6a/0x170 ? irqentry_exit+0x8a/0x5f0 ? trace_hardirqs_on_prepare+0x55/0x130 ? lockdep_hardirqs_on_prepare+0x97/0x170 ? irqentry_exit+0x8f/0x5f0 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7fd5f465b280 Code: Unable to access opcode bytes at 0x7fd5f465b256. RSP: 002b:00007fff149c5880 EFLAGS: 00000202 ORIG_RAX: 000000000000003b RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 Kernel panic - not syncing: softlockup: hung tasks CPU: 1 UID: 0 PID: 6528 Comm: make Tainted: G S I L 7.0.0-rc2-00273-g5e4b47fd150c #1 PREEMPT(full) Tainted: [S]=CPU_OUT_OF_SPEC, [I]=FIRMWARE_WORKAROUND, [L]=SOFTLOCKUP Hardware name: Dell Inc. OptiPlex 7040/0Y7WYT, BIOS 1.1.1 10/07/2015 Call Trace: dump_stack_lvl+0x57/0x80 vpanic+0x15c/0x390 panic+0xbc/0xc0 ? __pfx_panic+0x10/0x10 watchdog_timer_fn.cold+0xf7/0x104 ? __pfx_watchdog_timer_fn+0x10/0x10 __hrtimer_run_queues+0x16a/0x630 ? __pfx___hrtimer_run_queues+0x10/0x10 ? lock_release+0x6a/0x170 ? __pfx_read_tsc+0x10/0x10 ? ktime_get_update_offsets_now+0x100/0x270 hrtimer_interrupt+0x1cb/0x3b0 __sysvec_apic_timer_interrupt+0x97/0x2b0 sysvec_apic_timer_interrupt+0x68/0xb0 asm_sysvec_apic_timer_interrupt+0x16/0x20 RIP: 0010:sched_mm_cid_after_execve+0x1e6/0x370 Code: 1f 49 8d 94 47 40 0b 00 00 48 89 c8 48 c1 f8 06 48 89 55 c8 48 8d 3c c2 e8 27 90 5a 00 48 8b 55 c8 48 8b 4d b8 f0 48 0f ab 0a <72> 42 48 8b 7d d0 e8 0f 7a 5a 00 45 89 ac 24 30 1b 00 00 49 8d bc RSP: 0018:ffff888805237ad0 EFLAGS: 00000247 RAX: 0000000000000001 RBX: ffff8888052a6000 RCX: 0000000000000000 RDX: ffff8888052a6b50 RSI: 0000000000000008 RDI: ffff8888052a6b50 RBP: ffff888805237b18 R08: 0000000000000001 R09: ffffed1100a54d6a R10: ffff8888052a6b57 R11: 0000000000000000 R12: ffff888805240000 R13: 0000000000000000 R14: 0000000000000001 R15: ffff8888052a6000 bprm_execve+0x137/0x1b0 do_execveat_common+0x22b/0x270 __x64_sys_execve+0x55/0x70 do_syscall_64+0x11b/0x1530 ? _raw_spin_unlock_irq+0x2f/0x70 ? __x64_sys_rt_sigprocmask+0x17f/0x270 ? __pfx___x64_sys_rt_sigprocmask+0x10/0x10 ? lock_acquire+0xac/0x230 ? do_syscall_64+0x1d5/0x1530 ? trace_hardirqs_on_prepare+0x55/0x130 ? do_syscall_64+0x1f3/0x1530 ? __lock_release+0x5d/0x1b0 ? __might_fault+0x63/0xb0 ? lock_release+0x6a/0x170 ? _copy_to_user+0x58/0x70 ? __x64_sys_rt_sigprocmask+0x196/0x270 ? __pfx___x64_sys_rt_sigprocmask+0x10/0x10 ? rcu_is_watching+0x1c/0x70 ? find_held_lock+0x2b/0xb0 ? do_syscall_64+0x1d5/0x1530 ? trace_hardirqs_on_prepare+0x55/0x130 ? do_syscall_64+0x1f3/0x1530 ? find_held_lock+0x2b/0xb0 ? exc_page_fault+0x6a/0xf0 ? __lock_release+0x5d/0x1b0 ? handle_mm_fault+0x270/0x3f0 ? exc_page_fault+0x6a/0xf0 ? lock_release+0x6a/0x170 ? irqentry_exit+0x8a/0x5f0 ? trace_hardirqs_on_prepare+0x55/0x130 ? lockdep_hardirqs_on_prepare+0x97/0x170 ? irqentry_exit+0x8f/0x5f0 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7fd5f465b280 Code: Unable to access opcode bytes at 0x7fd5f465b256. RSP: 002b:00007fff149c5880 EFLAGS: 00000202 ORIG_RAX: 000000000000003b RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 Kernel Offset: disabled No EFI environment detected. early console in extract_kernel input_data: 0x00000008700022cc input_len: 0x0000000001a2ee65 output: 0x000000086a000000 output_len: 0x0000000007996ef0 kernel_total_size: 0x0000000006e30000 needed_size: 0x0000000007a00000 trampoline_32bit: 0x0000000000000000 KASLR disabled: 'nokaslr' on cmdline.