early console in setup code
No EFI environment detected.
early console in extract_kernel
input_data: 0x04d09094
input_len: 0x023d2551
output: 0x01000000
output_len: 0x0605abf8
kernel_total_size: 0x05910000
needed_size: 0x0605abf8

Decompressing Linux... Parsing ELF... No relocation needed... done.
Booting the kernel (entry_offset: 0x04c43fd4).
[    0.000000][    T0] Linux version 7.1.0-rc5-00007-g73cf422c6afb (kbuild@f0e7f063e9c2) (clang version 20.1.8 (git://gitmirror/llvm_project 87f0227cb60147a26a1eeb4fb06e3b505e9c7261), LLD 20.1.8 (git://gitmirror/llvm_project 87f0227cb60147a26a1eeb4fb06e3b505e9c7261)) #1 SMP PREEMPT_DYNAMIC Wed May 27 14:05:20 CST 2026
[    0.000000][    T0] x86/CPU: Model not found in latest microcode list
[    0.000000][    T0] BIOS-provided physical RAM map:
[    0.000000][    T0] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff]  System RAM
[    0.000000][    T0] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff]  device reserved
[    0.000000][    T0] BIOS-e820: [gap 0x00000000000a0000-0x00000000000effff]
[    0.000000][    T0] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff]  device reserved
[    0.000000][    T0] BIOS-e820: [mem 0x0000000000100000-0x00000000bffdffff]  System RAM
[    0.000000][    T0] BIOS-e820: [mem 0x00000000bffe0000-0x00000000bfffffff]  device reserved
[    0.000000][    T0] BIOS-e820: [gap 0x00000000c0000000-0x00000000feffbfff]
[    0.000000][    T0] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff]  device reserved
[    0.000000][    T0] BIOS-e820: [gap 0x00000000ff000000-0x00000000fffbffff]
[    0.000000][    T0] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff]  device reserved
[    0.000000][    T0] BIOS-e820: [mem 0x0000000100000000-0x000000083fffffff]  System RAM
[    0.000000][    T0] e820: remove [mem 0x100000000-0xfffffffffffffffe] System RAM
[    0.000000][    T0] printk: debug: ignoring loglevel setting.
[    0.000000][    T0] printk: legacy bootconsole [earlyser0] enabled
[    0.000000][    T0] e820: remove [mem 0x100000000-0xfffffffffffffffe] System RAM
[    0.000000][    T0] earlycon: uart8250 at I/O port 0x3f8 (options '115200n8')
[    0.000000][    T0] printk: legacy bootconsole [uart8250] enabled
[    0.000000][    T0] Linux version 7.1.0-rc5-00007-g73cf422c6afb (kbuild@f0e7f063e9c2) (clang version 20.1.8 (git://gitmirror/llvm_project 87f0227cb60147a26a1eeb4fb06e3b505e9c7261), LLD 20.1.8 (git://gitmirror/llvm_project 87f0227cb60147a26a1eeb4fb06e3b505e9c7261)) #1 SMP PREEMPT_DYNAMIC Wed May 27 14:05:20 CST 2026
[    0.000000][    T0] x86/CPU: Model not found in latest microcode list
[    0.000000][    T0] BIOS-provided physical RAM map:
[    0.000000][    T0] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff]  System RAM
[    0.000000][    T0] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff]  device reserved
[    0.000000][    T0] BIOS-e820: [gap 0x00000000000a0000-0x00000000000effff]
[    0.000000][    T0] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff]  device reserved
[    0.000000][    T0] BIOS-e820: [mem 0x0000000000100000-0x00000000bffdffff]  System RAM
[    0.000000][    T0] BIOS-e820: [mem 0x00000000bffe0000-0x00000000bfffffff]  device reserved
[    0.000000][    T0] BIOS-e820: [gap 0x00000000c0000000-0x00000000feffbfff]
[    0.000000][    T0] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff]  device reserved
[    0.000000][    T0] BIOS-e820: [gap 0x00000000ff000000-0x00000000fffbffff]
[    0.000000][    T0] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff]  device reserved
[    0.000000][    T0] BIOS-e820: [mem 0x0000000100000000-0x000000083fffffff]  System RAM
[    0.000000][    T0] e820: remove [mem 0x100000000-0xfffffffffffffffe] System RAM
[    0.000000][    T0] printk: debug: ignoring loglevel setting.
[    0.000000][    T0] printk: legacy bootconsole [earlyser0] enabled
[    0.000000][    T0] e820: remove [mem 0x100000000-0xfffffffffffffffe] System RAM
[    0.000000][    T0] earlycon: uart8250 at I/O port 0x3f8 (options '115200n8')
[    0.000000][    T0] printk: legacy bootconsole [uart8250] enabled
[    0.000000][    T0] printk: debug: skip boot console de-registration.
[    0.000000][    T0] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[    0.000000][    T0] APIC: Static calls initialized
[    0.000000][    T0] user-defined physical RAM map:
[    0.000000][    T0] user: [mem 0x0000000000000000-0x000000000009fbff]  System RAM
[    0.000000][    T0] user: [mem 0x000000000009fc00-0x000000000009ffff]  device reserved
[    0.000000][    T0] user: [gap 0x00000000000a0000-0x00000000000effff]
[    0.000000][    T0] user: [mem 0x00000000000f0000-0x00000000000fffff]  device reserved
[    0.000000][    T0] user: [mem 0x0000000000100000-0x00000000bffdffff]  System RAM
[    0.000000][    T0] user: [mem 0x00000000bffe0000-0x00000000bfffffff]  device reserved
[    0.000000][    T0] user: [gap 0x00000000c0000000-0x00000000feffbfff]
[    0.000000][    T0] user: [mem 0x00000000feffc000-0x00000000feffffff]  device reserved
[    0.000000][    T0] user: [gap 0x00000000ff000000-0x00000000fffbffff]
[    0.000000][    T0] user: [mem 0x00000000fffc0000-0x00000000ffffffff]  device reserved
[    0.000000][    T0] DMI: SMBIOS 2.8 present.
[    0.000000][    T0] DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
[    0.000000][    T0] DMI: Memory slots populated: 1/1
[    0.000000][    T0] Hypervisor detected: KVM
[    0.000000][    T0] last_pfn = 0xbffe0 max_arch_pfn = 0x100000
[    0.000000][    T0] kvm-clock: Using msrs 4b564d01 and 4b564d00
[    0.000003][    T0] kvm-clock: using sched offset of 6898930908 cycles
[    0.001183][    T0] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[    0.004716][    T0] tsc: Detected 2593.904 MHz processor
[    0.006442][    T0] e820: update [mem 0x00000000-0x00000fff] System RAM ==> device reserved
[    0.008127][    T0] e820: remove [mem 0x000a0000-0x000fffff] System RAM
[    0.009451][    T0] last_pfn = 0xbffe0 max_arch_pfn = 0x100000
[    0.010660][    T0] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs
[    0.012467][    T0] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.014027][    T0] initial memory mapped: [mem 0x00000000-0x06ffffff]
[    0.015377][    T0] RAMDISK: [mem 0x7e102000-0x7fffffff]
[    0.016444][    T0] ACPI: Early table checksum verification disabled
[    0.017707][    T0] ACPI: RSDP 0x00000000000F5290 000014 (v00 BOCHS )
[    0.019002][    T0] ACPI: RSDT 0x00000000BFFE23D1 000034 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.020857][    T0] ACPI: FACP 0x00000000BFFE227D 000074 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.022693][    T0] ACPI: DSDT 0x00000000BFFE0040 00223D (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.024534][    T0] ACPI: FACS 0x00000000BFFE0000 000040
[    0.025595][    T0] ACPI: APIC 0x00000000BFFE22F1 000080 (v03 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.027427][    T0] ACPI: HPET 0x00000000BFFE2371 000038 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.028903][    T0] ACPI: WAET 0x00000000BFFE23A9 000028 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.030363][    T0] ACPI: Reserving FACP table memory at [mem 0xbffe227d-0xbffe22f0]
[    0.031587][    T0] ACPI: Reserving DSDT table memory at [mem 0xbffe0040-0xbffe227c]
[    0.032821][    T0] ACPI: Reserving FACS table memory at [mem 0xbffe0000-0xbffe003f]
[    0.034042][    T0] ACPI: Reserving APIC table memory at [mem 0xbffe22f1-0xbffe2370]
[    0.035265][    T0] ACPI: Reserving HPET table memory at [mem 0xbffe2371-0xbffe23a8]
[    0.036500][    T0] ACPI: Reserving WAET table memory at [mem 0xbffe23a9-0xbffe23d0]
[    0.037725][    T0] Mapped APIC to         ffffc000 (        fee00000)
[    0.039140][    T0] 143MB HIGHMEM available.
[    0.039821][    T0] 2927MB LOWMEM available.
[    0.040509][    T0]   mapped low ram: 0 - b6ffe000
[    0.041265][    T0]   low ram: 0 - b6ffe000
[    0.042279][    T0] ACPI: PM-Timer IO Port: 0x608
[    0.043039][    T0] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[    0.044318][    T0] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[    0.046095][    T0] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.047747][    T0] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 0, APIC INT 02
[    0.049539][    T0] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[    0.051244][    T0] Int: type 0, pol 1, trig 3, bus 00, IRQ 05, APIC ID 0, APIC INT 05
[    0.053093][    T0] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.054776][    T0] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 0, APIC INT 09
[    0.056566][    T0] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[    0.058327][    T0] Int: type 0, pol 1, trig 3, bus 00, IRQ 0a, APIC ID 0, APIC INT 0a
[    0.060177][    T0] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[    0.061932][    T0] Int: type 0, pol 1, trig 3, bus 00, IRQ 0b, APIC ID 0, APIC INT 0b
[    0.063779][    T0] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 0, APIC INT 01
[    0.065588][    T0] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 0, APIC INT 03
[    0.067417][    T0] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 0, APIC INT 04
[    0.069288][    T0] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 0, APIC INT 06
[    0.071145][    T0] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 0, APIC INT 07
[    0.072964][    T0] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 0, APIC INT 08
[    0.074779][    T0] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 0, APIC INT 0c
[    0.076594][    T0] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 0, APIC INT 0d
[    0.078397][    T0] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 0, APIC INT 0e
[    0.080227][    T0] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 0, APIC INT 0f
[    0.082047][    T0] ACPI: Using ACPI (MADT) for SMP configuration information
[    0.083698][    T0] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.085078][    T0] TSC deadline timer available
[    0.086159][    T0] CPU topo: Max. logical packages:   1
[    0.087394][    T0] CPU topo: Max. logical nodes:      1
[    0.088450][    T0] CPU topo: Num. nodes per package:  1
[    0.089310][    T0] CPU topo: Max. logical dies:       1
[    0.090168][    T0] CPU topo: Max. dies per package:   1
[    0.091026][    T0] CPU topo: Max. threads per core:   1
[    0.091884][    T0] CPU topo: Num. cores per package:     2
[    0.092778][    T0] CPU topo: Num. threads per package:   2
[    0.093654][    T0] CPU topo: Allowing 2 present CPUs plus 0 hotplug CPUs
[    0.094724][    T0] mapped IOAPIC to ffffb000 (fec00000)
[    0.095584][    T0] kvm-guest: APIC: eoi() replaced with kvm_guest_apic_eoi_write()
[    0.096851][    T0] [gap 0xc0000000-0xfeffbfff] available for PCI devices
[    0.097919][    T0] Booting paravirtualized kernel on KVM
[    0.098769][    T0] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.100553][    T0] Zone ranges:
[    0.101063][    T0]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.102148][    T0]   Normal   [mem 0x0000000001000000-0x00000000b6ffdfff]
[    0.103232][    T0]   HighMem  [mem 0x00000000b6ffe000-0x00000000bffdffff]
[    0.104326][    T0] Movable zone start for each node
[    0.105106][    T0] Early memory node ranges
[    0.105777][    T0]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.106870][    T0]   node   0: [mem 0x0000000000100000-0x00000000bffdffff]
[    0.107987][    T0] Initmem setup node 0 [mem 0x0000000000001000-0x00000000bffdffff]
[    0.109595][    T0] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.111014][    T0] On node 0, zone DMA: 97 pages in unavailable ranges
[    0.124083][    T0] On node 0, zone HighMem: 32 pages in unavailable ranges
[    0.125203][    T0] No bootconfig data provided, so skipping bootconfig
[    0.125210][    T0] setup_percpu: NR_CPUS:8 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
[    0.127569][    T0] percpu: Embedded 31 pages/cpu s95296 r0 d31680 u126976
[    0.128667][    T0] pcpu-alloc: s95296 r0 d31680 u126976 alloc=31*4096
[    0.129699][    T0] pcpu-alloc: [0] 0 [0] 1 
[    0.130406][    T0] Kernel command line: ip=::::vm-meta-89::dhcp root=/dev/ram0 RESULT_ROOT=/result/trinity/group-01-5-300s/vm-snb/yocto-i386-minimal-20190520.cgz/i386-randconfig-007-20260527/clang-20/73cf422c6afb067b7e5d395dae8c44e076a00ebb/0 BOOT_IMAGE=/pkg/linux/i386-randconfig-007-20260527/clang-20/73cf422c6afb067b7e5d395dae8c44e076a00ebb/vmlinuz-7.1.0-rc5-00007-g73cf422c6afb branch=linux-next/master job=/lkp/jobs/scheduled/vm-meta-89/trinity-group-01-5-300s-yocto-i386-minimal-20190520.cgz-i386-randconfig-007-20260527-73cf422c6afb-20260527-28926-1ckg32-0.yaml user=lkp ARCH=i386 kconfig=i386-randconfig-007-20260527 commit=73cf422c6afb067b7e5d395dae8c44e076a00ebb mem=4G intremap=posted_msi watchdog_thresh=240 rcuperf.shutdown=0 rcuscale.shutdown=0 refscale.shutdown=0 audit=0 kunit.enable=0 ia32_emulation=on max_uptime=7200 LKP_SERVER=internal-lkp-server selinux=0 debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 net.ifnames=0 printk.devkmsg=on panic=-1 softlockup_panic=1 nmi_watchdog=panic \
[    0.145305][    T0] Kernel command line: oops=panic load_ramdisk=2 prompt_ramdisk=0 drbd.minor_count=8 systemd.log_level=err ignore_loglevel console=tty0 earlyprintk=ttyS0,115200 console=ttyS0,115200 vga=normal rw mem=4G earlycon=uart8250,io,0x3f8,115200n8 keep_bootcon
[    0.152908][    T0] sysrq: sysrq always enabled.
[    0.155438][    T0] Unknown kernel command line parameters "RESULT_ROOT=/result/trinity/group-01-5-300s/vm-snb/yocto-i386-minimal-20190520.cgz/i386-randconfig-007-20260527/clang-20/73cf422c6afb067b7e5d395dae8c44e076a00ebb/0 branch=linux-next/master job=/lkp/jobs/scheduled/vm-meta-89/trinity-group-01-5-300s-yocto-i386-minimal-20190520.cgz-i386-randconfig-007-20260527-73cf422c6afb-20260527-28926-1ckg32-0.yaml user=lkp ARCH=i386 kconfig=i386-randconfig-007-20260527 commit=73cf422c6afb067b7e5d395dae8c44e076a00ebb intremap=posted_msi audit=0 ia32_emulation=on max_uptime=7200 LKP_SERVER=internal-lkp-server selinux=0 nmi_watchdog=panic load_ramdisk=2 prompt_ramdisk=0 vga=normal", will be passed to user space.
[    0.170067][    T0] printk: log buffer data + meta data: 1048576 + 3276800 = 4325376 bytes
[    0.172855][    T0] Dentry cache hash table entries: 524288 (order: 9, 2097152 bytes, linear)
[    0.175003][    T0] Inode-cache hash table entries: 262144 (order: 8, 1048576 bytes, linear)
[    0.177018][    T0] Built 1 zonelists, mobility grouping on.  Total pages: 786302
[    0.178843][    T0] mem auto-init: stack:all(zero), heap alloc:off, heap free:on
[    0.180593][    T0] mem auto-init: clearing system memory may take some time...
[    0.182333][    T0] stackdepot: allocating hash table via alloc_large_system_hash
[    0.184077][    T0] stackdepot hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.186023][    T0] stackdepot: allocating space for 8192 stack pools via memblock
[    0.974389][    T0] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.976391][    T0] **********************************************************
[    0.978015][    T0] **   NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE   **
[    0.979740][    T0] **                                                      **
[    0.981015][    T0] ** This system shows unhashed kernel memory addresses   **
[    0.982661][    T0] ** via the console, logs, and other interfaces. This    **
[    0.984288][    T0] ** might reduce the security of your system.            **
[    0.985470][    T0] **                                                      **
[    0.986650][    T0] ** If you see this message and you are not debugging    **
[    0.987832][    T0] ** the kernel, report this immediately to your system   **
[    0.989039][    T0] ** administrator!                                       **
[    0.990227][    T0] **                                                      **
[    0.991404][    T0] ** Use hash_pointers=always to force this mode off      **
[    0.992589][    T0] **                                                      **
[    0.993740][    T0] **   NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE   **
[    0.994891][    T0] **********************************************************
[    0.996404][    T0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.997625][    T0] allocated 3145728 bytes of page_ext
[    1.025559][    T0] ftrace: allocating 118597 entries in 232 pages
[    1.026566][    T0] ftrace: allocated 232 pages with 4 groups
[    1.027621][    T0] Dynamic Preempt: lazy
[    1.028440][    T0] Running RCU self tests
[    1.029097][    T0] Running RCU synchronous self tests
[    1.029918][    T0] rcu: Preemptible hierarchical RCU implementation.
[    1.030945][    T0] rcu: 	RCU event tracing is enabled.
[    1.031779][    T0] rcu: 	RCU lockdep checking is enabled.
[    1.032665][    T0] rcu: 	RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
[    1.033816][    T0] 	RCU CPU stall warnings timeout set to 100 (rcu_cpu_stall_timeout).
[    1.035092][    T0] 	Trampoline variant of Tasks RCU enabled.
[    1.036031][    T0] 	Rude variant of Tasks RCU enabled.
[    1.036865][    T0] 	Tracing variant of Tasks RCU enabled.
[    1.037739][    T0] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    1.039054][    T0] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    1.040272][    T0] Running RCU synchronous self tests
[    1.041094][    T0] RCU Tasks: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=2.
[    1.042590][    T0] RCU Tasks Rude: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=2.
[    1.060310][    T0] NR_IRQS: 2304, nr_irqs: 56, preallocated irqs: 16
[    1.062295][    T0] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    1.074743][    T0] Console: colour VGA+ 80x25
[    1.075889][    T0] printk: legacy console [tty0] enabled
[    1.140208][    T0] printk: legacy console [ttyS0] enabled
[    1.142152][    T0] serial port 0 not yet initialized
[    1.156177][    T0] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[    1.160598][    T0] ... MAX_LOCKDEP_SUBCLASSES:  8
[    1.163081][    T0] ... MAX_LOCK_DEPTH:          48
[    1.165636][    T0] ... MAX_LOCKDEP_KEYS:        8192
[    1.168330][    T0] ... CLASSHASH_SIZE:          4096
[    1.170996][    T0] ... MAX_LOCKDEP_ENTRIES:     32768
[    1.173662][    T0] ... MAX_LOCKDEP_CHAINS:      65536
[    1.176400][    T0] ... CHAINHASH_SIZE:          32768
[    1.179113][    T0]  memory used by lock dependency info: 3869 kB
[    1.182157][    T0]  memory used for stack traces: 2112 kB
[    1.184988][    T0]  per task-struct memory footprint: 1344 bytes
[    1.188141][    T0] ACPI: Core revision 20251212
[    1.190102][    T0] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
[    1.193719][    T0] APIC: Switch to symmetric I/O mode setup
[    1.195715][    T0] Masked ExtINT on CPU#0
[    1.197922][    T0] ENABLING IO-APIC IRQs
[    1.199348][    T0] Init IO_APIC IRQs
[    1.200681][    T0] apic 0 pin 0 not connected
[    1.202256][    T0] IOAPIC[0]: Preconfigured routing entry (0-1 -> IRQ 1 Level:0 ActiveLow:0)
[    1.205238][    T0] IOAPIC[0]: Preconfigured routing entry (0-2 -> IRQ 0 Level:0 ActiveLow:0)
[    1.208187][    T0] IOAPIC[0]: Preconfigured routing entry (0-3 -> IRQ 3 Level:0 ActiveLow:0)
[    1.211119][    T0] IOAPIC[0]: Preconfigured routing entry (0-4 -> IRQ 4 Level:0 ActiveLow:0)
[    1.214108][    T0] IOAPIC[0]: Preconfigured routing entry (0-5 -> IRQ 5 Level:1 ActiveLow:0)
[    1.217055][    T0] IOAPIC[0]: Preconfigured routing entry (0-6 -> IRQ 6 Level:0 ActiveLow:0)
[    1.220001][    T0] IOAPIC[0]: Preconfigured routing entry (0-7 -> IRQ 7 Level:0 ActiveLow:0)
[    1.222937][    T0] IOAPIC[0]: Preconfigured routing entry (0-8 -> IRQ 8 Level:0 ActiveLow:0)
[    1.225922][    T0] IOAPIC[0]: Preconfigured routing entry (0-9 -> IRQ 9 Level:1 ActiveLow:0)
[    1.228867][    T0] IOAPIC[0]: Preconfigured routing entry (0-10 -> IRQ 10 Level:1 ActiveLow:0)
[    1.231867][    T0] IOAPIC[0]: Preconfigured routing entry (0-11 -> IRQ 11 Level:1 ActiveLow:0)
[    1.234859][    T0] IOAPIC[0]: Preconfigured routing entry (0-12 -> IRQ 12 Level:0 ActiveLow:0)
[    1.237856][    T0] IOAPIC[0]: Preconfigured routing entry (0-13 -> IRQ 13 Level:0 ActiveLow:0)
[    1.240850][    T0] IOAPIC[0]: Preconfigured routing entry (0-14 -> IRQ 14 Level:0 ActiveLow:0)
[    1.244038][    T0] IOAPIC[0]: Preconfigured routing entry (0-15 -> IRQ 15 Level:0 ActiveLow:0)
[    1.248516][    T0] apic 0 pin 16 not connected
[    1.250922][    T0] apic 0 pin 17 not connected
[    1.253296][    T0] apic 0 pin 18 not connected
[    1.255807][    T0] apic 0 pin 19 not connected
[    1.258222][    T0] apic 0 pin 20 not connected
[    1.260589][    T0] apic 0 pin 21 not connected
[    1.262935][    T0] apic 0 pin 22 not connected
[    1.265405][    T0] apic 0 pin 23 not connected
[    1.267967][    T0] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    1.271394][    T0] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2563bd843df, max_idle_ns: 440795257314 ns
[    1.277239][    T0] Calibrating delay loop (skipped) preset value.. 5187.80 BogoMIPS (lpj=25939040)
[    1.281501][    T0] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[    1.287841][    T0] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[    1.290147][    T0] mitigations: Enabled attack vectors: SMT mitigations: off
[    1.292583][    T0] Speculative Store Bypass: Vulnerable
[    1.294427][    T0] Spectre V2 : Vulnerable
[    1.297226][    T0] ITS: Vulnerable
[    1.298481][    T0] MDS: Vulnerable
[    1.299740][    T0] Spectre V1 : Vulnerable: __user pointer sanitization and usercopy barriers only; no swapgs barriers
[    1.303379][    T0] L1TF: Kernel not compiled for PAE. No mitigation for L1TF
[    1.305824][    T0] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    1.308435][    T0] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    1.310885][    T0] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    1.313338][    T0] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    1.315733][    T0] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    1.320759][    T0] pid_max: default: 32768 minimum: 301
[    1.322937][    T0] Mount-cache hash table entries: 8192 (order: 3, 32768 bytes, linear)
[    1.325783][    T0] Mountpoint-cache hash table entries: 8192 (order: 3, 32768 bytes, linear)
[    1.329633][    T0] VFS: Finished mounting rootfs on nullfs
[    1.332368][    T0] Running RCU synchronous self tests
[    1.334192][    T0] Running RCU synchronous self tests
[    1.336201][    T1] smpboot: CPU0: Intel Xeon E312xx (Sandy Bridge) (family: 0x6, model: 0x2a, stepping: 0x1)
[    1.337223][    T1] Performance Events: unsupported CPU family 6 model 42 no PMU driver, software events only.
[    1.337223][    T1] signal: max sigframe size: 1760
[    1.337223][    T1] rcu: Hierarchical SRCU implementation.
[    1.339303][    T1] rcu: 	Max phase no-delay instances is 1000.
[    1.347774][    T1] smp: Bringing up secondary CPUs ...
[    1.351504][    T1] smpboot: x86: Booting SMP configuration:
[    1.354532][    T1] .... node  #0, CPUs:      #1
[    0.203038][    T0] Masked ExtINT on CPU#1
[    1.362323][    T1] smp: Brought up 1 node, 2 CPUs
[    1.354532][    T1] .... node  #0, CPUs:      #1
[    0.203038][    T0] Masked ExtINT on CPU#1
[    1.362323][    T1] smp: Brought up 1 node, 2 CPUs
[    1.368394][    T1] smpboot: Total of 2 processors activated (10375.61 BogoMIPS)
[    1.372853][    T1] Memory: 2979292K/3145208K available (42797K kernel code, 10101K rwdata, 24840K rodata, 2252K init, 7608K bss, 156612K reserved, 0K cma-reserved, 147336K highmem)
[    1.378970][    T1] devtmpfs: initialized
[    1.389602][    T1] Running RCU synchronous self tests
[    1.391515][    T1] Running RCU synchronous self tests
[    1.394221][    T1] Running RCU Tasks wait API self tests
[    1.397309][    T1] Running RCU Tasks Rude wait API self tests
[    1.400011][    T1] Running RCU Tasks Trace wait API self tests
[    1.404344][    T1] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    1.409026][    T1] posixtimers hash table entries: 1024 (order: 4, 40960 bytes, linear)
[    1.412873][    T1] futex hash table entries: 512 (32768 bytes on 1 NUMA nodes, total 32 KiB, linear).
[    1.417374][    T1] xor: automatically using best checksumming function   avx       
[    1.421745][    T1] 
[    1.422615][    T1] *************************************************************
[    1.425318][    T1] **     NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE    **
[    1.427263][    T1] **                                                         **
[    1.429875][    T1] **  IOMMU DebugFS SUPPORT HAS BEEN ENABLED IN THIS KERNEL  **
[    1.432506][    T1] **                                                         **
[    1.440223][    T1] ** This means that this kernel is built to expose internal **
[    1.447240][    T1] ** IOMMU data structures, which may compromise security on **
[    1.448688][    T1] ** your system.                                            **
[    1.457239][    T1] **                                                         **
[    1.460873][    T1] ** If you see this message and you are not debugging the   **
[    1.463177][    T1] ** kernel, report this immediately to your vendor!         **
[    1.466359][    T1] **                                                         **
[    1.468445][    T1] **     NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE    **
[    1.471085][    T1] *************************************************************
[    1.474457][    T1] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    1.483795][   T11] Callback from call_rcu_tasks_trace() invoked.
[    1.481756][    T1] thermal_sys: Registered thermal governor 'fair_share'
[    1.481761][    T1] thermal_sys: Registered thermal governor 'bang_bang'
[    1.484193][    T1] thermal_sys: Registered thermal governor 'step_wise'
[    1.486541][    T1] thermal_sys: Registered thermal governor 'user_space'
[    1.488931][    T1] thermal_sys: Registered thermal governor 'power_allocator'
[    1.491380][    T1] EISA bus registered
[    1.501855][    T1] cpuidle: using governor ladder
[    1.501855][    T1] Freeing SMP alternatives memory: 76K
[    1.502093][    T1] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    1.504861][    T1] PCI: Using configuration type 1 for base access
[    1.516119][    T1] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[    1.737911][    T1] raid6: sse2x2   gen()  9618 MB/s
[    1.747309][   T30] Callback from call_rcu_tasks() invoked.
[    1.737911][    T1] raid6: sse2x2   gen()  9618 MB/s
[    1.747309][   T30] Callback from call_rcu_tasks() invoked.
[    1.908468][    T1] raid6: sse2x1   gen()  8082 MB/s
[    2.079325][    T1] raid6: sse1x2   gen()  4076 MB/s
[    2.250173][    T1] raid6: sse1x1   gen()  3493 MB/s
[    2.252852][    T1] raid6: using algorithm sse2x2 gen() 9618 MB/s
[    2.427296][    T1] raid6: .... xor() 7230 MB/s, rmw enabled
[    2.435383][    T1] raid6: using ssse3x1 recovery algorithm
[    2.439170][    T1] gpio-f7188x: Unsupported Fintek device 0xffff
[    2.442529][    T1] gpio-f7188x: Unsupported Fintek device 0xffff
[    2.447013][    T1] ACPI: Added _OSI(Module Device)
[    2.449122][    T1] ACPI: Added _OSI(Processor Device)
[    2.451201][    T1] ACPI: Added _OSI(Processor Aggregator Device)
[    2.464380][    T1] ACPI: 1 ACPI AML tables successfully acquired and loaded
[    2.468062][    T1] ACPI: \_SB_: platform _OSC: OS support mask [00062e8e]
[    2.468062][    T1] ACPI: Interpreter enabled
[    2.468062][    T1] ACPI: PM: (supports S0 S3 S5)
[    2.468421][    T1] ACPI: Using IOAPIC for interrupt routing
[    2.470568][    T1] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    2.474000][    T1] PCI: Using E820 reservations for host bridge windows
[    2.477042][    T1] ACPI: Enabled 2 GPEs in block 00 to 0F
[    2.503240][    T1] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    2.517279][    T1] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments HPX-Type3]
[    2.521955][    T1] acpi PNP0A03:00: PCIe port services disabled; not requesting _OSC control
[    2.526365][    T1] acpi PNP0A03:00: _OSC: platform retains control of PCIe features (AE_ERROR)
[    2.529782][    T1] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended configuration space under this bridge
[    2.537306][    T1] acpi resource window ([0x840000000-0x8bfffffff] ignored, not CPU addressable)
[    2.547206][    T1] acpiphp: Slot [3] registered
[    2.548979][    T1] acpiphp: Slot [4] registered
[    2.551547][    T1] acpiphp: Slot [5] registered
[    2.554105][    T1] acpiphp: Slot [6] registered
[    2.555967][    T1] acpiphp: Slot [7] registered
[    2.557326][    T1] acpiphp: Slot [8] registered
[    2.559081][    T1] acpiphp: Slot [9] registered
[    2.560868][    T1] acpiphp: Slot [10] registered
[    2.562673][    T1] acpiphp: Slot [11] registered
[    2.564459][    T1] acpiphp: Slot [12] registered
[    2.566252][    T1] acpiphp: Slot [13] registered
[    2.568029][    T1] acpiphp: Slot [14] registered
[    2.569831][    T1] acpiphp: Slot [15] registered
[    2.571619][    T1] acpiphp: Slot [16] registered
[    2.573405][    T1] acpiphp: Slot [17] registered
[    2.575205][    T1] acpiphp: Slot [18] registered
[    2.576987][    T1] acpiphp: Slot [19] registered
[    2.578537][    T1] acpiphp: Slot [20] registered
[    2.580360][    T1] acpiphp: Slot [21] registered
[    2.582160][    T1] acpiphp: Slot [22] registered
[    2.583926][    T1] acpiphp: Slot [23] registered
[    2.585702][    T1] acpiphp: Slot [24] registered
[    2.587322][    T1] acpiphp: Slot [25] registered
[    2.589092][    T1] acpiphp: Slot [26] registered
[    2.590969][    T1] acpiphp: Slot [27] registered
[    2.592747][    T1] acpiphp: Slot [28] registered
[    2.594532][    T1] acpiphp: Slot [29] registered
[    2.596304][    T1] acpiphp: Slot [30] registered
[    2.598034][    T1] acpiphp: Slot [31] registered
[    2.599758][    T1] PCI host bridge to bus 0000:00
[    2.601504][    T1] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    2.604146][    T1] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    2.606790][    T1] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    2.609627][    T1] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]
[    2.613670][    T1] pci_bus 0000:00: root bus resource [bus 00-ff]
[    2.616714][    T1] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000 conventional PCI endpoint
[    2.622546][    T1] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100 conventional PCI endpoint
[    2.628887][    T1] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180 conventional PCI endpoint
[    2.634383][    T1] pci 0000:00:01.1: BAR 4 [io  0xc140-0xc14f]
[    2.637309][    T1] pci 0000:00:01.1: BAR 0 [io  0x01f0-0x01f7]: legacy IDE quirk
[    2.644731][    T1] pci 0000:00:01.1: BAR 1 [io  0x03f6]: legacy IDE quirk
[    2.648301][    T1] pci 0000:00:01.1: BAR 2 [io  0x0170-0x0177]: legacy IDE quirk
[    2.652066][    T1] pci 0000:00:01.1: BAR 3 [io  0x0376]: legacy IDE quirk
[    2.655412][    T1] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000 conventional PCI endpoint
[    2.658879][    T1] pci 0000:00:01.3: quirk: [io  0x0600-0x063f] claimed by PIIX4 ACPI
[    2.661676][    T1] pci 0000:00:01.3: quirk: [io  0x0700-0x070f] claimed by PIIX4 SMB
[    2.665280][    T1] pci 0000:00:02.0: [1234:1111] type 00 class 0x030000 conventional PCI endpoint
[    2.669596][    T1] pci 0000:00:02.0: BAR 0 [mem 0xfd000000-0xfdffffff pref]
[    2.672117][    T1] pci 0000:00:02.0: BAR 2 [mem 0xfebf0000-0xfebf0fff]
[    2.674462][    T1] pci 0000:00:02.0: ROM [mem 0xfebe0000-0xfebeffff pref]
[    2.676930][    T1] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    2.680296][    T1] pci 0000:00:03.0: [8086:100e] type 00 class 0x020000 conventional PCI endpoint
[    2.684421][    T1] pci 0000:00:03.0: BAR 0 [mem 0xfebc0000-0xfebdffff]
[    2.686790][    T1] pci 0000:00:03.0: BAR 1 [io  0xc100-0xc13f]
[    2.688732][    T1] pci 0000:00:03.0: ROM [mem 0xfeb80000-0xfebbffff pref]
[    2.696325][    T1] pci 0000:00:04.0: [8086:25ab] type 00 class 0x088000 conventional PCI endpoint
[    2.699961][    T1] pci 0000:00:04.0: BAR 0 [mem 0xfebf1000-0xfebf100f]
[    2.708350][    T1] pci 0000:00:05.0: [1b36:0005] type 00 class 0x00ff00 conventional PCI endpoint
[    2.714354][    T1] pci 0000:00:05.0: BAR 0 [mem 0xfebf2000-0xfebf2fff]
[    2.717257][    T1] pci 0000:00:05.0: BAR 1 [io  0xc000-0xc0ff]
[    2.729869][    T1] pci_bus 0000:00: on NUMA node 0
[    2.737635][    T1] ACPI: PCI: Interrupt link LNKA configured for IRQ 10
[    2.742101][    T1] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
[    2.746659][    T1] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
[    2.750671][    T1] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
[    2.754081][    T1] ACPI: PCI: Interrupt link LNKS configured for IRQ 9
[    2.766911][    T1] iommu: Default domain type: Translated
[    2.769158][    T1] iommu: DMA domain TLB invalidation policy: lazy mode
[    2.774185][    T1] SCSI subsystem initialized
[    2.778503][    T1] libata version 3.00 loaded.
[    2.782441][    T1] ACPI: bus type USB registered
[    2.786283][    T1] usbcore: registered new interface driver usbfs
[    2.790383][    T1] usbcore: registered new interface driver hub
[    2.793836][    T1] usbcore: registered new device driver usb
[    2.797848][    T1] pps_core: LinuxPPS API ver. 1 registered
[    2.800721][    T1] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    2.804508][    T1] PTP clock support registered
[    2.807063][    T1] FPGA manager framework
[    2.812555][    T1] Bluetooth: Core ver 2.22
[    2.817372][    T1] NET: Registered PF_BLUETOOTH protocol family
[    2.827119][    T1] Bluetooth: HCI device and connection manager initialized
[    2.830354][    T1] Bluetooth: HCI socket layer initialized
[    2.833920][    T1] Bluetooth: L2CAP socket layer initialized
[    2.837357][    T1] Bluetooth: SCO socket layer initialized
[    2.840438][    T1] NET: Registered PF_ATMPVC protocol family
[    2.843263][    T1] NET: Registered PF_ATMSVC protocol family
[    2.855360][    T1] PCI: Using ACPI for IRQ routing
[    2.855360][    T1] PCI: pci_cache_line_size set to 64 bytes
[    2.855360][    T1] e820: register RAM buffer resource [mem 0x0009fc00-0x0009ffff]
[    2.855360][    T1] e820: register RAM buffer resource [mem 0xbffe0000-0xbfffffff]
[    2.865595][    T1] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    2.865595][    T1] pci 0000:00:02.0: vgaarb: bridge control possible
[    2.865595][    T1] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    2.867236][    T1] vgaarb: loaded
[    2.877237][    T1] clocksource: Switched to clocksource kvm-clock
[    2.878001][    T1] VFS: Disk quotas dquot_6.6.0
[    2.878001][    T1] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    2.887394][    T1] pnp: PnP ACPI init
[    2.889739][    T1] pnp 00:02: [dma 2]
[    2.893130][    T1] pnp: PnP ACPI: found 6 devices
[    3.219510][    T1] mdacon: MDA with 8K of memory detected.
[    3.219802][    T1] Console: switching consoles 13-16 to MDA-2
[    3.261326][    T1] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    3.265201][    T1] NET: Registered PF_INET protocol family
[    3.267328][    T1] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    3.272314][    T1] tcp_listen_portaddr_hash hash table entries: 2048 (order: 5, 81920 bytes, linear)
[    3.275638][    T1] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    3.278713][    T1] TCP established hash table entries: 32768 (order: 5, 131072 bytes, linear)
[    3.282217][    T1] TCP bind hash table entries: 32768 (order: 10, 2621440 bytes, linear)
[    3.286864][    T1] TCP: Hash tables configured (established 32768 bind 32768)
[    3.287434][    C0] clocksource: Watchdog remote CPU 1 read timed out
[    3.287897][    T1] MPTCP token hash table entries: 4096 (order: 6, 196608 bytes, linear)
[    3.286864][    T1] TCP: Hash tables configured (established 32768 bind 32768)
[    3.287434][    C0] clocksource: Watchdog remote CPU 1 read timed out
[    3.287897][    T1] MPTCP token hash table entries: 4096 (order: 6, 196608 bytes, linear)
[    3.295085][    T1] UDP hash table entries: 2048 (order: 7, 311296 bytes, linear)
[    3.298062][    T1] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    3.300445][    T1] NET: Registered PF_XDP protocol family
[    3.302463][    T1] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    3.304903][    T1] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    3.307370][    T1] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    3.310448][    T1] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfebfffff window]
[    3.314914][    T1] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[    3.318362][    T1] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[    3.322045][    T1] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[    3.325706][    T1] PCI: CLS 0 bytes, default 64
[    3.328418][    T1] ACPI: bus type thunderbolt registered
[    3.329077][   T34] Trying to unpack rootfs image as initramfs...
[    3.328418][    T1] ACPI: bus type thunderbolt registered
[    3.333227][    T1] kvm_intel: VMX not supported by CPU 1
[    3.329077][   T34] Trying to unpack rootfs image as initramfs...
[    3.328418][    T1] ACPI: bus type thunderbolt registered
[    3.333227][    T1] kvm_intel: VMX not supported by CPU 1
[    3.329077][   T34] Trying to unpack rootfs image as initramfs...
[    3.333227][    T1] kvm_intel: VMX not supported by CPU 1
[    3.339455][    T1] kvm_amd: CPU 1 isn't AMD or Hygon
[    3.342325][    T1] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2563bd843df, max_idle_ns: 440795257314 ns
[    3.348019][    T1] mce: Machine check injector initialized
[    3.368383][    T1] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[    3.371171][    T1] apm: disabled - APM is not SMP safe.
[    3.373654][    T1] The force parameter has not been set to 1. The Iris poweroff handler will not be installed.
[    3.377954][    T1] NatSemi SCx200 Driver
[    3.382188][    T1] Key type blacklist registered
[    3.384093][    T1] workingset: timestamp_bits=14 (anon: 10) max_order=20 bucket_order=6 (anon: 10)
[    3.398075][    T1] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    3.400692][    T1] romfs: ROMFS MTD (C) 2007 Red Hat, Inc.
[    3.402771][    T1] QNX4 filesystem 0.2.3 registered.
[    3.404627][    T1] fuse: init (API version 7.45)
[    3.406881][    T1] orangefs_debugfs_init: called with debug mask: :none: :0:
[    3.410666][    T1] orangefs_init: module version upstream loaded
[    3.414109][    T1] NILFS version 2 loaded
[    3.416341][    T1] befs: version: 0.9.3
[    3.419057][    T1] OCFS2 User DLM kernel interface loaded
[    3.487324][    T1] cryptd: max_cpu_qlen set to 1000
[    3.555165][    T1] NET: Registered PF_ALG protocol family
[    3.558395][    T1] krb5: 
[    3.560059][    T1] krb5: Running selftests
[    3.562420][    T1] krb5: Running aes128-cts-hmac-sha256-128 prf
[    3.565723][    T1] krb5: Running aes256-cts-hmac-sha384-192 prf
[    3.569037][    T1] krb5: Running aes128-cts-hmac-sha256-128 key
[    3.572460][    T1] krb5: Running aes256-cts-hmac-sha384-192 key
[    3.575807][    T1] krb5: Running camellia128-cts-cmac key
[    4.745260][   T34] Freeing initrd memory: 31736K
[    4.758022][    T1] krb5: Running camellia256-cts-cmac key
[    4.760170][    T1] krb5: Running aes128-cts-hmac-sha256-128 enc no plain
[    4.793991][    T1] krb5: Running aes128-cts-hmac-sha256-128 enc plain<block
[    4.796553][    T1] krb5: Running aes128-cts-hmac-sha256-128 enc plain==block
[    4.799142][    T1] krb5: Running aes128-cts-hmac-sha256-128 enc plain>block
[    4.801715][    T1] krb5: Running aes256-cts-hmac-sha384-192 enc no plain
[    4.812218][    T1] krb5: Running aes256-cts-hmac-sha384-192 enc plain<block
[    4.824175][    T1] krb5: Running aes256-cts-hmac-sha384-192 enc plain==block
[    4.840605][    T1] krb5: Running aes256-cts-hmac-sha384-192 enc plain>block
[    4.846132][    T1] krb5: Running camellia128-cts-cmac enc no plain
[    4.883732][    T1] krb5: Running camellia128-cts-cmac enc 1 plain
[    4.886165][    T1] krb5: Running camellia128-cts-cmac enc 9 plain
[    4.888682][    T1] krb5: Running camellia128-cts-cmac enc 13 plain
[    4.891649][    T1] krb5: Running camellia128-cts-cmac enc 30 plain
[    4.894058][    T1] krb5: Running camellia256-cts-cmac enc no plain
[    4.896448][    T1] krb5: Running camellia256-cts-cmac enc 1 plain
[    4.898849][    T1] krb5: Running camellia256-cts-cmac enc 9 plain
[    4.901307][    T1] krb5: Running camellia256-cts-cmac enc 13 plain
[    4.903726][    T1] krb5: Running camellia256-cts-cmac enc 30 plain
[    4.906150][    T1] krb5: Running aes128-cts-hmac-sha256-128 mic
[    4.908435][    T1] krb5: Running aes256-cts-hmac-sha384-192 mic
[    4.911332][    T1] krb5: Running camellia128-cts-cmac mic abc
[    4.914588][    T1] krb5: Running camellia128-cts-cmac mic ABC
[    4.917848][    T1] krb5: Running camellia256-cts-cmac mic 123
[    4.920934][    T1] krb5: Running camellia256-cts-cmac mic !@#
[    4.924173][    T1] krb5: Selftests succeeded
[    4.926868][    T1] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 238)
[    4.932351][    T1] io scheduler mq-deadline registered
[    4.936907][    T1] io scheduler kyber registered
[    4.943288][    T1] io scheduler bfq registered
[    4.954310][    T1] gpio_it87: no device
[    4.957750][    T1] gpio_winbond: chip ID at 2e is ffff
[    4.959913][    T1] gpio_winbond: not an our chip
[    4.961750][    T1] gpio_winbond: chip ID at 4e is ffff
[    4.963727][    T1] gpio_winbond: not an our chip
[    4.967830][    T1] SPI driver leds_spi_byte has no spi_device_id for ubnt,acb-spi-led
[    4.974091][    T1] cpcihp_zt5550: ZT5550 CompactPCI Hot Plug Driver version: 0.2
[    4.977110][    T1] cpcihp_generic: Generic port I/O CompactPCI Hot Plug Driver version: 0.1
[    4.980494][    T1] cpcihp_generic: not configured, disabling.
[    4.988860][    T1] acpiphp_ibm: ibm_acpiphp_init: acpi_walk_namespace failed
[    4.992304][    T1] switchtec: loaded.
[    4.993831][    T1] Console: switching consoles 13-16 to MDA-2
[    4.997561][    T1] input: Power Button as /devices/platform/LNXPWRBN:00/input/input0
[    5.001101][    T1] ACPI: button: Power Button [PWRF]
[    5.006824][    T1] isapnp: Scanning for PnP cards...
[    5.388520][    T1] isapnp: No Plug & Play device found
[    5.564340][    T1] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    5.592535][    T1] 00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    5.626526][    T1] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    5.754778][    T1] lp: driver loaded but no devices found
[    5.757182][    T1] Applicom driver: $Id: ac.c,v 1.30 2000/03/22 16:03:57 dwmw2 Exp $
[    5.760652][    T1] ac.o: No PCI boards found.
[    5.762435][    T1] ac.o: For an ISA board you must supply memory and irq parameters.
[    5.765437][    T1] sonypi: Sony Programmable I/O Controller Driver v1.26.
[    5.768781][    T1] Non-volatile memory driver v1.3
[    5.774479][    T1] ppdev: user-space parallel port driver
[    5.776684][    T1] scx200_gpio: no SCx200 gpio present
[    5.780892][    T1] usbcore: registered new interface driver xillyusb
[    5.784045][    T1] ACPI: bus type drm_connector registered
[    5.789080][    T1] [drm] Initialized vgem 1.0.0 for vgem on minor 0
[    5.795871][    T1] [drm] Initialized vkms 1.0.0 for vkms on minor 1
[    5.802324][    T1] usbcore: registered new interface driver udl
[    5.808065][    T1] SPI driver abt-y030xx067a has no spi_device_id for abt,y030xx067a
[    5.826060][    T1] SPI driver panel-ilitek-ili9322 has no spi_device_id for dlink,dir-685-panel
[    5.831297][    T1] SPI driver panel-ilitek-ili9322 has no spi_device_id for ilitek,ili9322
[    5.845715][    T1] usbcore: registered new interface driver appletbdrm
[    5.850710][    T1] usbcore: registered new interface driver gm12u320
[    5.853461][    T1] SPI driver ili9163 has no spi_device_id for newhaven,1.8-128160EF
[    5.856941][    T1] usbcore: registered new interface driver gud
[    5.863976][   T12] Floppy drive(s): fd0 is 2.88M AMI BIOS
[    5.879500][   T12] FDC 0 is a S82078B
[    5.900450][    T1] brd: module loaded
[    5.915191][    T1] drbd: initialized. Version: 8.4.11 (api:1/proto:86-101)
[    5.925490][    T1] drbd: built-in
[    5.929329][    T1] drbd: registered as block device major 147
[    5.941140][    T1] null_blk: disk nullb0 created
[    5.944823][    T1] null_blk: module loaded
[    5.948140][    T1] ibmasm: IBM ASM Service Processor Driver version 1.0 loaded
[    5.952715][    T1] dummy-irq: no IRQ given.  Use irq=N
[    5.956347][    T1] Phantom Linux Driver, version n0.9.8, init OK
[    5.959214][    T1] Silicon Labs C2 port support v. 0.51.0 - (C) 2007 Rodolfo Giometti
[    5.962745][    T1] c2port c2port0: C2 port uc added
[    5.964682][    T1] c2port c2port0: uc flash has 30 blocks x 512 bytes (15360 bytes total)
[    5.970855][    T1] usbcore: registered new interface driver nct6694
[    5.975272][    T1] usbcore: registered new interface driver viperboard
[    5.978319][    T1] usbcore: registered new interface driver dln2
[    5.982128][    T1] Loading iSCSI transport class v2.0-870.
[    5.986466][    T1] hp_sw: device handler registered
[    5.992297][    T1] alua: device handler registered
[    5.994642][    T1] SCSI Media Changer driver v0.25 
[    5.996776][    T1] Key type psk registered
[    6.019399][    T1] scsi host0: ata_piix
[    6.024543][    T1] scsi host1: ata_piix
[    6.027773][    T1] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc140 irq 14 lpm-pol 0
[    6.032673][    T1] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc148 irq 15 lpm-pol 0
[    6.044860][    T1] SSFDC read-only Flash Translation layer
[    6.054556][    T1] mtd device must be supplied (device name is empty)
[    6.057984][    T1] scx200_docflash: NatSemi SCx200 DOCCS Flash Driver
[    6.061594][    T1] slram: not enough parameters.
[    6.063717][    T1] Ramix PMC551 PCI Mezzanine Ram Driver. (C) 1999,2000 Nortel Networks.
[    6.067132][    T1] pmc551: not detected
[    6.070691][    T1] rfd_ftl: no RFD magic found in 'mtdram test device'
[    6.073630][    T1] ftl_cs: FTL header not found.
[    6.084548][    T1] usbcore: registered new interface driver spi-ch341
[    6.091562][    T1] HSI/SSI char device loaded
[    6.100417][    T1] eql: Equalizer2002: Simon Janes (simon@ncm.com) and David S. Miller (davem@redhat.com)
[    6.110654][    T1] MACsec IEEE 802.1AE
[    6.143158][    T1] usbcore: registered new interface driver mvusb_mdio
[    6.148002][    T1] arcnet: arcnet loaded
[    6.154596][    T1] arcnet:rfc1201: RFC1201 "standard" (`a') encapsulation support loaded
[    6.157806][    T1] arcnet:rfc1051: RFC1051 "simple standard" (`s') encapsulation support loaded
[    6.161906][    T1] arcnet:arc_rawmode: raw mode (`r') encapsulation support loaded
[    6.164873][    T1] arcnet:com90io: COM90xx IO-mapped mode support (by David Woodhouse et el.)
[    6.168214][    T1] arcnet:com90io: E-mail me if you actually test this driver, please!
[    6.171313][    T1] (unnamed net_device) (uninitialized): No autoprobe for IO mapped cards; you must specify the base address!
[    6.175708][    T1] arcnet:arc_rimi: RIM I (entirely mem-mapped) support
[    6.178353][    T1] arcnet:arc_rimi: E-mail me if you actually test the RIM I driver, please!
[    6.181737][    T1] arcnet:arc_rimi: Given: node 00h, shmem 0h, irq 0
[    6.184241][    T1] arcnet:arc_rimi: No autoprobe for RIM I; you must specify the shmem and irq!
[    6.187716][    T1] arcnet:com20020_isa: COM20020 ISA support (by David Woodhouse et al.)
[    6.190899][    T1] (unnamed net_device) (uninitialized): No autoprobe (yet) for IO mapped cards; you must specify the base address!
[    6.203009][    T1] e1000: Intel(R) PRO/1000 Network Driver
[    6.205236][    T1] e1000: Copyright (c) 1999-2006 Intel Corporation.
[    6.221062][    T1] ACPI: \_SB_.LNKC: Enabled at IRQ 11
[    6.234467][  T113] ata2: found unknown device (class 0)
[    6.221062][    T1] ACPI: \_SB_.LNKC: Enabled at IRQ 11
[    6.234467][  T113] ata2: found unknown device (class 0)
[    6.243587][  T113] ata2.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100
[    6.248969][   T12] scsi 1:0:0:0: CD-ROM            QEMU     QEMU DVD-ROM     2.5+ PQ: 0 ANSI: 5
[    6.368816][   T12] sr 1:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray
[    6.488298][   T12] cdrom: Uniform CD-ROM driver Revision: 3.20
[    6.601091][   T12] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    6.604563][   T12] sr 1:0:0:0: Attached scsi generic sg0 type 5
[    6.644196][    T1] e1000 0000:00:03.0 eth0: (PCI:33MHz:32-bit) 52:54:00:12:34:56
[    6.648022][    T1] e1000 0000:00:03.0 eth0: Intel(R) PRO/1000 Network Connection
[    6.651516][    T1] jme: JMicron JMC2XX ethernet driver version 1.0.8
[    6.655159][    T1] ns83820.c: National Semiconductor DP83820 10/100/1000 driver.
[    6.658467][    T1] Solarflare Falcon driver v4.1
[    6.667622][    T1] Solarflare Siena driver
[    6.673984][    T1] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256).
[    6.677035][    T1] SLIP linefill/keepalive option.
[    6.679287][    T1] hdlc: HDLC support module revision 1.22
[    6.684010][    T1] wwan wwan0: port wwan0at0 attached
[    6.686579][    T1] wwan wwan0: port wwan0at1 attached
[    6.690145][    T1] wwan wwan1: port wwan1at0 attached
[    6.692669][    T1] wwan wwan1: port wwan1at1 attached
[    6.695132][    T1] VMware vmxnet3 virtual NIC driver - version 1.9.0.0-k-NAPI
[    6.698391][    T1] Solos PCI Driver Version 1.04
[    6.702210][    T1] VFIO - User Level meta-driver version: 0.3
[    6.710811][    T1] usbcore: registered new interface driver cdc_wdm
[    6.722878][    T1] usbcore: registered new interface driver usbtmc
[    6.726732][    T1] usbcore: registered new interface driver usb-storage
[    6.730863][    T1] usbcore: registered new interface driver ums-alauda
[    6.734918][    T1] usbcore: registered new interface driver ums-cypress
[    6.739150][    T1] usbcore: registered new interface driver ums_eneub6250
[    6.743532][    T1] usbcore: registered new interface driver ums-jumpshot
[    6.747830][    T1] usbcore: registered new interface driver ums-karma
[    6.751984][    T1] usbcore: registered new interface driver ums-onetouch
[    6.755458][    T1] usbcore: registered new interface driver ums-realtek
[    6.758482][    T1] usbcore: registered new interface driver ums-usbat
[    6.761294][    T1] usbcore: registered new interface driver mdc800
[    6.763782][    T1] mdc800: v0.7.5 (30/10/2000):USB Driver for Mustek MDC800 Digital Camera
[    6.768719][    T1] usbcore: registered new interface driver usbserial_generic
[    6.771900][    T1] usbserial: USB Serial support registered for generic
[    6.774674][    T1] usbcore: registered new interface driver aircable
[    6.777433][    T1] usbserial: USB Serial support registered for aircable
[    6.780347][    T1] usbcore: registered new interface driver ark3116
[    6.782979][    T1] usbserial: USB Serial support registered for ark3116
[    6.785744][    T1] usbcore: registered new interface driver cypress_m8
[    6.788620][    T1] usbserial: USB Serial support registered for DeLorme Earthmate USB
[    6.791911][    T1] usbserial: USB Serial support registered for HID->COM RS232 Adapter
[    6.795155][    T1] usbserial: USB Serial support registered for Nokia CA-42 V2 Adapter
[    6.798496][    T1] usbcore: registered new interface driver usb_debug
[    6.801198][    T1] usbserial: USB Serial support registered for debug
[    6.803855][    T1] usbserial: USB Serial support registered for xhci_dbc
[    6.806625][    T1] usbcore: registered new interface driver io_edgeport
[    6.809371][    T1] usbserial: USB Serial support registered for Edgeport 2 port adapter
[    6.830778][    T1] usbserial: USB Serial support registered for Edgeport 4 port adapter
[    6.835720][    T1] usbserial: USB Serial support registered for Edgeport 8 port adapter
[    6.840697][    T1] usbserial: USB Serial support registered for EPiC device
[    6.845047][    T1] usbcore: registered new interface driver io_ti
[    6.848808][    T1] usbserial: USB Serial support registered for Edgeport TI 1 port adapter
[    6.853003][    T1] usbserial: USB Serial support registered for Edgeport TI 2 port adapter
[    6.856367][    T1] usbcore: registered new interface driver empeg
[    6.858986][    T1] usbserial: USB Serial support registered for empeg
[    6.861878][    T1] usbcore: registered new interface driver f81534a_ctrl
[    6.864515][    T1] usbcore: registered new interface driver f81232
[    6.866968][    T1] usbserial: USB Serial support registered for f81232
[    6.869611][    T1] usbserial: USB Serial support registered for f81534a
[    6.872294][    T1] usbcore: registered new interface driver f81534
[    6.874768][    T1] usbserial: USB Serial support registered for Fintek F81532/F81534
[    6.877956][    T1] usbcore: registered new interface driver ftdi_sio
[    6.880482][    T1] usbserial: USB Serial support registered for FTDI USB Serial Device
[    6.883669][    T1] usbcore: registered new interface driver garmin_gps
[    6.886268][    T1] usbserial: USB Serial support registered for Garmin GPS usb/tty
[    6.889338][    T1] usbcore: registered new interface driver ipaq
[    6.891803][    T1] usbserial: USB Serial support registered for PocketPC PDA
[    6.894648][    T1] usbcore: registered new interface driver ir_usb
[    6.897118][    T1] usbserial: USB Serial support registered for IR Dongle
[    6.900004][    T1] usbcore: registered new interface driver keyspan
[    6.902531][    T1] usbserial: USB Serial support registered for Keyspan - (without firmware)
[    6.905853][    T1] usbserial: USB Serial support registered for Keyspan 1 port adapter
[    6.909073][    T1] usbserial: USB Serial support registered for Keyspan 2 port adapter
[    6.925794][    T1] usbserial: USB Serial support registered for Keyspan 4 port adapter
[    6.930685][    T1] usbcore: registered new interface driver mct_u232
[    6.934475][    T1] usbserial: USB Serial support registered for MCT U232
[    6.938595][    T1] usbcore: registered new interface driver navman
[    6.942301][    T1] usbserial: USB Serial support registered for navman
[    6.945316][    T1] usbcore: registered new interface driver omninet
[    6.948213][    T1] usbserial: USB Serial support registered for ZyXEL - omni.net usb
[    6.951570][    T1] usbcore: registered new interface driver opticon
[    6.954096][    T1] usbserial: USB Serial support registered for opticon
[    6.956832][    T1] usbcore: registered new interface driver option
[    6.959410][    T1] usbserial: USB Serial support registered for GSM modem (1-port)
[    6.962572][    T1] usbcore: registered new interface driver qcserial
[    6.965078][    T1] usbserial: USB Serial support registered for Qualcomm USB modem
[    6.968148][    T1] usbcore: registered new interface driver quatech2
[    6.970690][    T1] usbserial: USB Serial support registered for Quatech 2nd gen USB to Serial Driver
[    6.974299][    T1] usbcore: registered new interface driver safe_serial
[    6.976890][    T1] usbserial: USB Serial support registered for safe_serial
[    6.979695][    T1] usbcore: registered new interface driver sierra
[    6.982153][    T1] usbserial: USB Serial support registered for Sierra USB modem
[    6.985126][    T1] usbcore: registered new interface driver spcp8x5
[    6.987733][    T1] usbserial: USB Serial support registered for SPCP8x5
[    6.990443][    T1] usbcore: registered new interface driver ssu100
[    6.992904][    T1] usbserial: USB Serial support registered for Quatech SSU-100 USB to Serial Driver
[    6.996529][    T1] usbcore: registered new interface driver symbolserial
[    6.999249][    T1] usbserial: USB Serial support registered for symbol
[    7.001881][    T1] usbcore: registered new interface driver ti_usb_3410_5052
[    7.004639][    T1] usbserial: USB Serial support registered for TI USB 3410 1 port adapter
[    7.007926][    T1] usbserial: USB Serial support registered for TI USB 5052 2 port adapter
[    7.016545][    T1] usbcore: registered new interface driver upd78f0730
[    7.020434][    T1] usbserial: USB Serial support registered for upd78f0730
[    7.024534][    T1] usbcore: registered new interface driver whiteheat
[    7.028422][    T1] usbserial: USB Serial support registered for Connect Tech - WhiteHEAT - (prerenumeration)
[    7.034209][    T1] usbserial: USB Serial support registered for Connect Tech - WhiteHEAT
[    7.039125][    T1] usbcore: registered new interface driver xr_serial
[    7.042167][    T1] usbserial: USB Serial support registered for xr_serial
[    7.045025][    T1] usbcore: registered new interface driver xsens_mt
[    7.047756][    T1] usbserial: USB Serial support registered for xsens_mt
[    7.050910][    T1] usbcore: registered new interface driver appledisplay
[    7.054588][    T1] usbcore: registered new interface driver cypress_cy7c63
[    7.057476][    T1] usbcore: registered new interface driver cytherm
[    7.060091][    T1] usbcore: registered new interface driver usbio-bridge
[    7.062772][    T1] usbcore: registered new interface driver idmouse
[    7.065276][    T1] usbcore: registered new interface driver iowarrior
[    7.067919][    T1] usbcore: registered new interface driver usblcd
[    7.070492][    T1] usbcore: registered new interface driver ldusb
[    7.072982][    T1] usbcore: registered new interface driver usb_ehset_test
[    7.075794][    T1] usbcore: registered new interface driver trancevibrator
[    7.078633][    T1] usbcore: registered new interface driver uss720
[    7.081090][    T1] uss720: USB Parport Cable driver for Cables using the Lucent Technologies USS720 Chip
[    7.084797][    T1] uss720: NOTE: this is a special purpose driver to allow nonstandard
[    7.087939][    T1] uss720: protocols (eg. bitbang) over USS720 usb to parallel cables
[    7.091049][    T1] uss720: If you just want to connect to a printer, use usblp instead
[    7.094528][    T1] usbcore: registered new interface driver sisusb
[    7.097066][    T1] usbcore: registered new interface driver cxacru
[    7.099687][    T1] usbcore: registered new interface driver speedtch
[    7.102294][    T1] usbcore: registered new interface driver ueagle-atm
[    7.104853][    T1] xusbatm: malformed module parameters
[    7.108350][    T1] dummy_hcd dummy_hcd.0: USB Host+Gadget Emulator, driver 02 May 2005
[    7.112237][    T1] dummy_hcd dummy_hcd.0: Dummy host controller
[    7.117428][    T1] dummy_hcd dummy_hcd.0: new USB bus registered, assigned bus number 1
[    7.122755][    T1] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 7.01
[    7.127653][    T1] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    7.132122][    T1] usb usb1: Product: Dummy host controller
[    7.135272][    T1] usb usb1: Manufacturer: Linux 7.1.0-rc5-00007-g73cf422c6afb dummy_hcd
[    7.139976][    T1] usb usb1: SerialNumber: dummy_hcd.0
[    7.146459][    T1] hub 1-0:1.0: USB hub found
[    7.148665][    T1] hub 1-0:1.0: 1 port detected
[    7.153929][    T1] SPI driver max3420-udc has no spi_device_id for maxim,max3421-udc
[    7.158019][    T1] zero gadget.0: Gadget Zero, version: Cinco de Mayo 2008
[    7.160768][    T1] zero gadget.0: zero ready
[    7.162753][    T1] gadgetfs: USB Gadget filesystem, version 24 Aug 2004
[    7.165359][    T1] file system registered
[    7.167152][    T1] UDC core: g_serial: couldn't find an available UDC
[    7.170216][    T1] UDC core: printer: couldn't find an available UDC
[    7.172926][    T1] UDC core: dbgp: couldn't find an available UDC
[    7.175386][    T1] UDC core: g_multi: couldn't find an available UDC
[    7.178001][    T1] UDC core: g_nokia: couldn't find an available UDC
[    7.182350][    T1] vhci_hcd: vhci_hcd_probe:1372: name vhci_hcd id 0
[    7.187450][    T1] vhci_hcd vhci_hcd.0: USB/IP Virtual Host Controller
[    7.193570][    T1] vhci_hcd vhci_hcd.0: new USB bus registered, assigned bus number 2
[    7.199756][    T1] vhci_hcd: vhci_start:1204: enter vhci_start
[    7.203161][    T1] vhci_hcd vhci_hcd.0: created sysfs vhci_hcd.0
[    7.206912][    T1] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 7.01
[    7.215967][    T1] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    7.227626][    T1] usb usb2: Product: USB/IP Virtual Host Controller
[    7.237031][    T1] usb usb2: Manufacturer: Linux 7.1.0-rc5-00007-g73cf422c6afb vhci_hcd
[    7.242573][    T1] usb usb2: SerialNumber: vhci_hcd.0
[    7.247507][    T1] hub 2-0:1.0: USB hub found
[    7.249438][    T1] vhci_hcd: vhci_hub_control:337: typeReq a006 wValue 2900 wIndex 0
[    7.252742][    T1] vhci_hcd: vhci_hub_control:408:  GetHubDescriptor
[    7.255278][    T1] vhci_hcd vhci_hcd.0: vhci_hub_control port -1
[    7.257239][    T1] vhci_hcd: vhci_hub_control:656:  bye
[    7.259907][    T1] hub 2-0:1.0: 8 ports detected
[    7.261815][    T1] vhci_hcd: vhci_hub_control:337: typeReq a000 wValue 0 wIndex 0
[    7.264740][    T1] vhci_hcd: vhci_hub_control:432:  GetHubStatus
[    7.267099][    T1] vhci_hcd vhci_hcd.0: vhci_hub_control port -1
[    7.269448][    T1] vhci_hcd: vhci_hub_control:656:  bye
[    7.273163][    T1] vhci_hcd: vhci_hub_control:337: typeReq 2303 wValue 8 wIndex 1
[    7.276147][    T1] vhci_hcd: vhci_hub_control:552:  SetPortFeature: USB_PORT_FEAT_POWER
[    7.279360][    T1] vhci_hcd vhci_hcd.0: vhci_hub_control port 0
[    7.281611][    T1] vhci_hcd: dump_port_status_diff:129: status prev -> new: 00000000 -> 00000100
[    7.281611][    T1] vhci_hcd: dump_port_status_diff:143:  +POWER
[    7.287379][    T1] vhci_hcd: dump_port_status_diff:151: 
[    7.287379][    T1] vhci_hcd: vhci_hub_control:656:  bye
[    7.292032][    T1] vhci_hcd: vhci_hub_control:337: typeReq 2303 wValue 8 wIndex 2
[    7.295037][    T1] vhci_hcd: vhci_hub_control:552:  SetPortFeature: USB_PORT_FEAT_POWER
[    7.298235][    T1] vhci_hcd vhci_hcd.0: vhci_hub_control port 1
[    7.300693][    T1] vhci_hcd: dump_port_status_diff:129: status prev -> new: 00000000 -> 00000100
[    7.301954][    T1] vhci_hcd: dump_port_status_diff:143:  +POWER
[    7.301954][    T1] vhci_hcd: dump_port_status_diff:151: 
[    7.301954][    T1] vhci_hcd: vhci_hub_control:656:  bye
[    7.319233][    T1] vhci_hcd: vhci_hub_control:337: typeReq 2303 wValue 8 wIndex 3
[    7.323759][    T1] vhci_hcd: vhci_hub_control:552:  SetPortFeature: USB_PORT_FEAT_POWER
[    7.328518][    T1] vhci_hcd vhci_hcd.0: vhci_hub_control port 2
[    7.329069][    T1] vhci_hcd: dump_port_status_diff:129: status prev -> new: 00000000 -> 00000100
[    7.329069][    T1] vhci_hcd: dump_port_status_diff:143:  +POWER
[    7.329069][    T1] vhci_hcd: dump_port_status_diff:151: 
[    7.329069][    T1] vhci_hcd: vhci_hub_control:656:  bye
[    7.348174][    T1] vhci_hcd: vhci_hub_control:337: typeReq 2303 wValue 8 wIndex 4
[    7.351817][    T1] vhci_hcd: vhci_hub_control:552:  SetPortFeature: USB_PORT_FEAT_POWER
[    7.355010][    T1] vhci_hcd vhci_hcd.0: vhci_hub_control port 3
[    7.357343][    T1] vhci_hcd: dump_port_status_diff:129: status prev -> new: 00000000 -> 00000100
[    7.357820][    T1] vhci_hcd: dump_port_status_diff:143:  +POWER
[    7.357820][    T1] vhci_hcd: dump_port_status_diff:151: 
[    7.357820][    T1] vhci_hcd: vhci_hub_control:656:  bye
[    7.367419][    T1] vhci_hcd: vhci_hub_control:337: typeReq 2303 wValue 8 wIndex 5
[    7.370482][    T1] vhci_hcd: vhci_hub_control:552:  SetPortFeature: USB_PORT_FEAT_POWER
[    7.373624][    T1] vhci_hcd vhci_hcd.0: vhci_hub_control port 4
[    7.375962][    T1] vhci_hcd: dump_port_status_diff:129: status prev -> new: 00000000 -> 00000100
[    7.377309][    T1] vhci_hcd: dump_port_status_diff:143:  +POWER
[    7.377309][    T1] vhci_hcd: dump_port_status_diff:151: 
[    7.377309][    T1] vhci_hcd: vhci_hub_control:656:  bye
[    7.386081][    T1] vhci_hcd: vhci_hub_control:337: typeReq 2303 wValue 8 wIndex 6
[    7.389047][    T1] vhci_hcd: vhci_hub_control:552:  SetPortFeature: USB_PORT_FEAT_POWER
[    7.392246][    T1] vhci_hcd vhci_hcd.0: vhci_hub_control port 5
[    7.394598][    T1] vhci_hcd: dump_port_status_diff:129: status prev -> new: 00000000 -> 00000100
[    7.397813][    T1] vhci_hcd: dump_port_status_diff:143:  +POWER
[    7.397813][    T1] vhci_hcd: dump_port_status_diff:151: 
[    7.397813][    T1] vhci_hcd: vhci_hub_control:656:  bye
[    7.404623][    T1] vhci_hcd: vhci_hub_control:337: typeReq 2303 wValue 8 wIndex 7
[    7.407622][    T1] vhci_hcd: vhci_hub_control:552:  SetPortFeature: USB_PORT_FEAT_POWER
[    7.407823][   T11] usb 1-1: new high-speed USB device number 2 using dummy_hcd
[    7.408555][    T1] vhci_hcd vhci_hcd.0: vhci_hub_control port 6
[    7.407622][    T1] vhci_hcd: vhci_hub_control:552:  SetPortFeature: USB_PORT_FEAT_POWER
[    7.408581][    T1] vhci_hcd: dump_port_status_diff:129: status prev -> new: 00000000 -> 00000100
[    7.407823][   T11] usb 1-1: new high-speed USB device number 2 using dummy_hcd
[    7.408587][    T1] vhci_hcd: dump_port_status_diff:143:  +POWER
[    7.408555][    T1] vhci_hcd vhci_hcd.0: vhci_hub_control port 6
[    7.408589][    T1] vhci_hcd: dump_port_status_diff:151: 
[    7.408581][    T1] vhci_hcd: dump_port_status_diff:129: status prev -> new: 00000000 -> 00000100
[    7.408591][    T1] vhci_hcd: vhci_hub_control:656:  bye
[    7.408587][    T1] vhci_hcd: dump_port_status_diff:143:  +POWER
[    7.408589][    T1] vhci_hcd: dump_port_status_diff:151: 
[    7.408591][    T1] vhci_hcd: vhci_hub_control:656:  bye
[    7.435410][    T1] vhci_hcd: vhci_hub_control:337: typeReq 2303 wValue 8 wIndex 8
[    7.442082][    T1] vhci_hcd: vhci_hub_control:552:  SetPortFeature: USB_PORT_FEAT_POWER
[    7.446721][    T1] vhci_hcd vhci_hcd.0: vhci_hub_control port 7
[    7.447938][    T1] vhci_hcd: dump_port_status_diff:129: status prev -> new: 00000000 -> 00000100
[    7.447938][    T1] vhci_hcd: dump_port_status_diff:143:  +POWER
[    7.447938][    T1] vhci_hcd: dump_port_status_diff:151: 
[    7.447938][    T1] vhci_hcd: vhci_hub_control:656:  bye
[    7.460782][   T37] vhci_hcd: vhci_hub_control:337: typeReq a300 wValue 0 wIndex 1
[    7.460932][    T1] vhci_hcd vhci_hcd.0: USB/IP Virtual Host Controller
[    7.461747][   T37] vhci_hcd: vhci_hub_control:436:  GetPortStatus port 1
[    7.460782][   T37] vhci_hcd: vhci_hub_control:337: typeReq a300 wValue 0 wIndex 1
[    7.460932][    T1] vhci_hcd vhci_hcd.0: USB/IP Virtual Host Controller
[    7.461747][   T37] vhci_hcd: vhci_hub_control:436:  GetPortStatus port 1
[    7.467439][    T1] vhci_hcd vhci_hcd.0: new USB bus registered, assigned bus number 3
[    7.467298][   T37] vhci_hcd: vhci_hub_control:498:  GetPortStatus bye 100 0
[    7.469037][    T1] vhci_hcd: vhci_start:1204: enter vhci_start
[    7.467298][   T37] vhci_hcd vhci_hcd.0: vhci_hub_control port 0
[    7.470666][    T1] vhci_hcd: vhci_hub_control:337: typeReq 8006 wValue f00 wIndex 0
[    7.467298][   T37] vhci_hcd: dump_port_status_diff:129: status prev -> new: 00000100 -> 00000100
[    7.467439][    T1] vhci_hcd vhci_hcd.0: new USB bus registered, assigned bus number 3
[    7.461747][   T37] vhci_hcd: vhci_hub_control:436:  GetPortStatus port 1
[    7.467298][   T37] vhci_hcd: vhci_hub_control:498:  GetPortStatus bye 100 0
[    7.467439][    T1] vhci_hcd vhci_hcd.0: new USB bus registered, assigned bus number 3
[    7.469037][    T1] vhci_hcd: vhci_start:1204: enter vhci_start
[    7.467298][   T37] vhci_hcd: vhci_hub_control:498:  GetPortStatus bye 100 0
[    7.467298][   T37] vhci_hcd vhci_hcd.0: vhci_hub_control port 0
[    7.469037][    T1] vhci_hcd: vhci_start:1204: enter vhci_start
[    7.470666][    T1] vhci_hcd: vhci_hub_control:337: typeReq 8006 wValue f00 wIndex 0
[    7.467298][   T37] vhci_hcd vhci_hcd.0: vhci_hub_control port 0
[    7.467298][   T37] vhci_hcd: dump_port_status_diff:129: status prev -> new: 00000100 -> 00000100
[    7.470666][    T1] vhci_hcd: vhci_hub_control:337: typeReq 8006 wValue f00 wIndex 0
[    7.467298][   T37] vhci_hcd: dump_port_status_diff:129: status prev -> new: 00000100 -> 00000100
[    7.467298][   T37] vhci_hcd: dump_port_status_diff:143:   POWER
[    7.467298][   T37] vhci_hcd: dump_port_status_diff:151: 
[    7.467298][   T37] vhci_hcd: vhci_hub_control:656:  bye
[    7.477238][    T1] vhci_hcd vhci_hcd.0: vhci_hub_control port -1
[    7.493040][   T37] vhci_hcd: vhci_hub_control:337: typeReq a300 wValue 0 wIndex 2
[    7.477238][    T1] vhci_hcd: vhci_hub_control:656:  bye
[    7.477238][    T1] vhci_hcd vhci_hcd.0: vhci_hub_control port -1
[    7.493040][   T37] vhci_hcd: vhci_hub_control:337: typeReq a300 wValue 0 wIndex 2
[    7.477238][    T1] vhci_hcd: vhci_hub_control:656:  bye
[    7.500495][   T37] vhci_hcd: vhci_hub_control:436:  GetPortStatus port 2
[    7.500590][    T1] vhci_hcd: vhci_hub_control:337: typeReq 8006 wValue f00 wIndex 0
[    7.501298][   T37] vhci_hcd: vhci_hub_control:498:  GetPortStatus bye 100 0
[    7.500495][   T37] vhci_hcd: vhci_hub_control:436:  GetPortStatus port 2
[    7.500590][    T1] vhci_hcd: vhci_hub_control:337: typeReq 8006 wValue f00 wIndex 0
[    7.501298][   T37] vhci_hcd: vhci_hub_control:498:  GetPortStatus bye 100 0
[    7.502869][   T37] vhci_hcd vhci_hcd.0: vhci_hub_control port 1
[    7.502869][   T37] vhci_hcd: dump_port_status_diff:129: status prev -> new: 00000100 -> 00000100
[    7.502869][   T37] vhci_hcd: dump_port_status_diff:143:   POWER
[    7.502869][   T37] vhci_hcd: dump_port_status_diff:151: 
[    7.502869][   T37] vhci_hcd: vhci_hub_control:656:  bye
[    7.510517][    T1] vhci_hcd vhci_hcd.0: vhci_hub_control port -1
[    7.546131][   T37] vhci_hcd: vhci_hub_control:337: typeReq a300 wValue 0 wIndex 3
[    7.510517][    T1] vhci_hcd: vhci_hub_control:656:  bye
[    7.510517][    T1] vhci_hcd vhci_hcd.0: vhci_hub_control port -1
[    7.546131][   T37] vhci_hcd: vhci_hub_control:337: typeReq a300 wValue 0 wIndex 3
[    7.510517][    T1] vhci_hcd: vhci_hub_control:656:  bye
[    7.555030][   T37] vhci_hcd: vhci_hub_control:436:  GetPortStatus port 3
[    7.555247][    T1] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
[    7.555902][   T37] vhci_hcd: vhci_hub_control:498:  GetPortStatus bye 100 0
[    7.557150][    T1] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 7.01
[    7.557762][   T37] vhci_hcd vhci_hcd.0: vhci_hub_control port 2
[    7.557771][   T37] vhci_hcd: dump_port_status_diff:129: status prev -> new: 00000100 -> 00000100
[    7.558826][    T1] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    7.557805][   T37] vhci_hcd: dump_port_status_diff:143:   POWER
[    7.560604][    T1] usb usb3: Product: USB/IP Virtual Host Controller
[    7.557805][   T37] vhci_hcd: dump_port_status_diff:151: 
[    7.562227][    T1] usb usb3: Manufacturer: Linux 7.1.0-rc5-00007-g73cf422c6afb vhci_hcd
[    7.557805][   T37] vhci_hcd: vhci_hub_control:656:  bye
[    7.563607][    T1] usb usb3: SerialNumber: vhci_hcd.0
[    7.555030][   T37] vhci_hcd: vhci_hub_control:436:  GetPortStatus port 3
[    7.564698][   T37] vhci_hcd: vhci_hub_control:337: typeReq a300 wValue 0 wIndex 4
[    7.566429][    T1] hub 3-0:1.0: USB hub found
[    7.566563][   T37] vhci_hcd: vhci_hub_control:436:  GetPortStatus port 4
[    7.567500][    T1] vhci_hcd: vhci_hub_control:337: typeReq a006 wValue 2a00 wIndex 0
[    7.555247][    T1] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
[    7.555030][   T37] vhci_hcd: vhci_hub_control:436:  GetPortStatus port 3
[    7.567981][   T37] vhci_hcd: vhci_hub_control:498:  GetPortStatus bye 100 0
[    7.555902][   T37] vhci_hcd: vhci_hub_control:498:  GetPortStatus bye 100 0
[    7.555247][    T1] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
[    7.557150][    T1] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 7.01
[    7.555902][   T37] vhci_hcd: vhci_hub_control:498:  GetPortStatus bye 100 0
[    7.557762][   T37] vhci_hcd vhci_hcd.0: vhci_hub_control port 2
[    7.557150][    T1] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 7.01
[    7.557771][   T37] vhci_hcd: dump_port_status_diff:129: status prev -> new: 00000100 -> 00000100
[    7.557762][   T37] vhci_hcd vhci_hcd.0: vhci_hub_control port 2
[    7.558826][    T1] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    7.557771][   T37] vhci_hcd: dump_port_status_diff:129: status prev -> new: 00000100 -> 00000100
[    7.557805][   T37] vhci_hcd: dump_port_status_diff:143:   POWER
[    7.558826][    T1] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    7.560604][    T1] usb usb3: Product: USB/IP Virtual Host Controller
[    7.557805][   T37] vhci_hcd: dump_port_status_diff:143:   POWER
[    7.557805][   T37] vhci_hcd: dump_port_status_diff:151: 
[    7.560604][    T1] usb usb3: Product: USB/IP Virtual Host Controller
[    7.562227][    T1] usb usb3: Manufacturer: Linux 7.1.0-rc5-00007-g73cf422c6afb vhci_hcd
[    7.557805][   T37] vhci_hcd: dump_port_status_diff:151: 
[    7.557805][   T37] vhci_hcd: vhci_hub_control:656:  bye
[    7.562227][    T1] usb usb3: Manufacturer: Linux 7.1.0-rc5-00007-g73cf422c6afb vhci_hcd
[    7.563607][    T1] usb usb3: SerialNumber: vhci_hcd.0
[    7.557805][   T37] vhci_hcd: vhci_hub_control:656:  bye
[    7.564698][   T37] vhci_hcd: vhci_hub_control:337: typeReq a300 wValue 0 wIndex 4
[    7.563607][    T1] usb usb3: SerialNumber: vhci_hcd.0
[    7.566429][    T1] hub 3-0:1.0: USB hub found
[    7.564698][   T37] vhci_hcd: vhci_hub_control:337: typeReq a300 wValue 0 wIndex 4
[    7.566563][   T37] vhci_hcd: vhci_hub_control:436:  GetPortStatus port 4
[    7.566429][    T1] hub 3-0:1.0: USB hub found
[    7.567500][    T1] vhci_hcd: vhci_hub_control:337: typeReq a006 wValue 2a00 wIndex 0
[    7.566563][   T37] vhci_hcd: vhci_hub_control:436:  GetPortStatus port 4
[    7.567981][   T37] vhci_hcd: vhci_hub_control:498:  GetPortStatus bye 100 0
[    7.567500][    T1] vhci_hcd: vhci_hub_control:337: typeReq a006 wValue 2a00 wIndex 0
[    7.567981][   T37] vhci_hcd: vhci_hub_control:498:  GetPortStatus bye 100 0
[    7.574570][   T37] vhci_hcd vhci_hcd.0: vhci_hub_control port 3
[    7.574570][   T37] vhci_hcd: dump_port_status_diff:129: status prev -> new: 00000100 -> 00000100
[    7.574570][   T37] vhci_hcd: dump_port_status_diff:143:   POWER
[    7.574570][   T37] vhci_hcd: dump_port_status_diff:151: 
[    7.574570][   T37] vhci_hcd: vhci_hub_control:656:  bye
[    7.577453][    T1] vhci_hcd: vhci_hub_control:408:  GetHubDescriptor
[    7.627261][   T37] vhci_hcd: vhci_hub_control:337: typeReq a300 wValue 0 wIndex 5
[    7.626801][    T1] vhci_hcd vhci_hcd.0: vhci_hub_control port -1
[    7.577453][    T1] vhci_hcd: vhci_hub_control:408:  GetHubDescriptor
[    7.627261][   T37] vhci_hcd: vhci_hub_control:337: typeReq a300 wValue 0 wIndex 5
[    7.626801][    T1] vhci_hcd vhci_hcd.0: vhci_hub_control port -1
[    7.626801][    T1] vhci_hcd: vhci_hub_control:656:  bye
[    7.637235][   T37] vhci_hcd: vhci_hub_control:436:  GetPortStatus port 5
[    7.641753][    T1] hub 3-0:1.0: 8 ports detected
[    7.641585][   T37] vhci_hcd: vhci_hub_control:498:  GetPortStatus bye 100 0
[    7.644866][    T1] vhci_hcd: vhci_hub_control:337: typeReq a000 wValue 0 wIndex 0
[    7.641585][   T37] vhci_hcd vhci_hcd.0: vhci_hub_control port 4
[    7.637235][   T37] vhci_hcd: vhci_hub_control:436:  GetPortStatus port 5
[    7.641753][    T1] hub 3-0:1.0: 8 ports detected
[    7.641585][   T37] vhci_hcd: vhci_hub_control:498:  GetPortStatus bye 100 0
[    7.644866][    T1] vhci_hcd: vhci_hub_control:337: typeReq a000 wValue 0 wIndex 0
[    7.641585][   T37] vhci_hcd vhci_hcd.0: vhci_hub_control port 4
[    7.647511][   T37] vhci_hcd: dump_port_status_diff:129: status prev -> new: 00000100 -> 00000100
[    7.647511][   T37] vhci_hcd: dump_port_status_diff:143:   POWER
[    7.647511][   T37] vhci_hcd: dump_port_status_diff:151: 
[    7.647511][   T37] vhci_hcd: vhci_hub_control:656:  bye
[    7.657452][    T1] vhci_hcd: vhci_hub_control:432:  GetHubStatus
[    7.669662][   T37] vhci_hcd: vhci_hub_control:337: typeReq a300 wValue 0 wIndex 6
[    7.657452][    T1] vhci_hcd vhci_hcd.0: vhci_hub_control port -1
[    7.657452][    T1] vhci_hcd: vhci_hub_control:432:  GetHubStatus
[    7.669662][   T37] vhci_hcd: vhci_hub_control:337: typeReq a300 wValue 0 wIndex 6
[    7.657452][    T1] vhci_hcd vhci_hcd.0: vhci_hub_control port -1
[    7.657452][    T1] vhci_hcd: vhci_hub_control:656:  bye
[    7.679349][   T37] vhci_hcd: vhci_hub_control:436:  GetPortStatus port 6
[    7.681530][    T1] vhci_hcd: vhci_hub_control:337: typeReq 2303 wValue 8 wIndex 1
[    7.679349][   T37] vhci_hcd: vhci_hub_control:498:  GetPortStatus bye 100 0
[    7.681530][    T1] vhci_hcd: vhci_hub_control:337: typeReq 2303 wValue 8 wIndex 1
[    7.679349][   T37] vhci_hcd: vhci_hub_control:498:  GetPortStatus bye 100 0
[    7.679349][   T37] vhci_hcd vhci_hcd.0: vhci_hub_control port 5
[    7.679349][   T37] vhci_hcd: dump_port_status_diff:129: status prev -> new: 00000100 -> 00000100
[    7.679349][   T37] vhci_hcd: dump_port_status_diff:143:   POWER
[    7.679349][   T37] vhci_hcd: dump_port_status_diff:151: 
[    7.679349][   T37] vhci_hcd: vhci_hub_control:656:  bye
[    7.689442][    T1] vhci_hcd: vhci_hub_control:552:  SetPortFeature: USB_PORT_FEAT_POWER
[    7.700496][   T37] vhci_hcd: vhci_hub_control:337: typeReq a300 wValue 0 wIndex 7
[    7.689442][    T1] vhci_hcd vhci_hcd.0: vhci_hub_control port 0
[    7.689442][    T1] vhci_hcd: vhci_hub_control:552:  SetPortFeature: USB_PORT_FEAT_POWER
[    7.700496][   T37] vhci_hcd: vhci_hub_control:337: typeReq a300 wValue 0 wIndex 7
[    7.689442][    T1] vhci_hcd vhci_hcd.0: vhci_hub_control port 0
[    7.689442][    T1] vhci_hcd: dump_port_status_diff:129: status prev -> new: 00000000 -> 00000200
[    7.689442][    T1] vhci_hcd: dump_port_status_diff:143:  +POWER
[    7.689442][    T1] vhci_hcd: dump_port_status_diff:151: 
[    7.689442][    T1] vhci_hcd: vhci_hub_control:656:  bye
[    7.710379][   T37] vhci_hcd: vhci_hub_control:436:  GetPortStatus port 7
[    7.723730][    T1] vhci_hcd: vhci_hub_control:337: typeReq 2303 wValue 8 wIndex 2
[    7.710379][   T37] vhci_hcd: vhci_hub_control:498:  GetPortStatus bye 100 0
[    7.710379][   T37] vhci_hcd: vhci_hub_control:436:  GetPortStatus port 7
[    7.723730][    T1] vhci_hcd: vhci_hub_control:337: typeReq 2303 wValue 8 wIndex 2
[    7.710379][   T37] vhci_hcd: vhci_hub_control:498:  GetPortStatus bye 100 0
[    7.710379][   T37] vhci_hcd vhci_hcd.0: vhci_hub_control port 6
[    7.710379][   T37] vhci_hcd: dump_port_status_diff:129: status prev -> new: 00000100 -> 00000100
[    7.710379][   T37] vhci_hcd: dump_port_status_diff:143:   POWER
[    7.710379][   T37] vhci_hcd: dump_port_status_diff:151: 
[    7.710379][   T37] vhci_hcd: vhci_hub_control:656:  bye
[    7.733277][    T1] vhci_hcd: vhci_hub_control:552:  SetPortFeature: USB_PORT_FEAT_POWER
[    7.753119][   T37] vhci_hcd: vhci_hub_control:337: typeReq a300 wValue 0 wIndex 8
[    7.733277][    T1] vhci_hcd vhci_hcd.0: vhci_hub_control port 1
[    7.733277][    T1] vhci_hcd: vhci_hub_control:552:  SetPortFeature: USB_PORT_FEAT_POWER
[    7.753119][   T37] vhci_hcd: vhci_hub_control:337: typeReq a300 wValue 0 wIndex 8
[    7.733277][    T1] vhci_hcd vhci_hcd.0: vhci_hub_control port 1
[    7.733277][    T1] vhci_hcd: dump_port_status_diff:129: status prev -> new: 00000000 -> 00000200
[    7.733277][    T1] vhci_hcd: dump_port_status_diff:143:  +POWER
[    7.733277][    T1] vhci_hcd: dump_port_status_diff:151: 
[    7.733277][    T1] vhci_hcd: vhci_hub_control:656:  bye
[    7.762548][   T37] vhci_hcd: vhci_hub_control:436:  GetPortStatus port 8
[    7.773647][    T1] vhci_hcd: vhci_hub_control:337: typeReq 2303 wValue 8 wIndex 3
[    7.762548][   T37] vhci_hcd: vhci_hub_control:498:  GetPortStatus bye 100 0
[    7.762548][   T37] vhci_hcd: vhci_hub_control:436:  GetPortStatus port 8
[    7.773647][    T1] vhci_hcd: vhci_hub_control:337: typeReq 2303 wValue 8 wIndex 3
[    7.762548][   T37] vhci_hcd: vhci_hub_control:498:  GetPortStatus bye 100 0
[    7.762548][   T37] vhci_hcd vhci_hcd.0: vhci_hub_control port 7
[    7.762548][   T37] vhci_hcd: dump_port_status_diff:129: status prev -> new: 00000100 -> 00000100
[    7.762548][   T37] vhci_hcd: dump_port_status_diff:143:   POWER
[    7.762548][   T37] vhci_hcd: dump_port_status_diff:151: 
[    7.762548][   T37] vhci_hcd: vhci_hub_control:656:  bye
[    7.783527][    T1] vhci_hcd: vhci_hub_control:552:  SetPortFeature: USB_PORT_FEAT_POWER
[    7.794791][   T37] usb usb2: vhci_bus_suspend
[    7.783527][    T1] vhci_hcd vhci_hcd.0: vhci_hub_control port 2
[    7.783527][    T1] vhci_hcd: vhci_hub_control:552:  SetPortFeature: USB_PORT_FEAT_POWER
[    7.783527][    T1] vhci_hcd: dump_port_status_diff:129: status prev -> new: 00000000 -> 00000200
[    7.794791][   T37] usb usb2: vhci_bus_suspend
[    7.783527][    T1] vhci_hcd vhci_hcd.0: vhci_hub_control port 2
[    7.783527][    T1] vhci_hcd: dump_port_status_diff:129: status prev -> new: 00000000 -> 00000200
[    7.783527][    T1] vhci_hcd: dump_port_status_diff:143:  +POWER
[    7.783527][    T1] vhci_hcd: dump_port_status_diff:151: 
[    7.783527][    T1] vhci_hcd: vhci_hub_control:656:  bye
[    7.813099][    T1] vhci_hcd: vhci_hub_control:337: typeReq 2303 wValue 8 wIndex 4
[    7.817450][    T1] vhci_hcd: vhci_hub_control:552:  SetPortFeature: USB_PORT_FEAT_POWER
[    7.822101][    T1] vhci_hcd vhci_hcd.0: vhci_hub_control port 3
[    7.825473][    T1] vhci_hcd: dump_port_status_diff:129: status prev -> new: 00000000 -> 00000200
[    7.827411][    T1] vhci_hcd: dump_port_status_diff:143:  +POWER
[    7.827411][    T1] vhci_hcd: dump_port_status_diff:151: 
[    7.827411][    T1] vhci_hcd: vhci_hub_control:656:  bye
[    7.843721][    T1] vhci_hcd: vhci_hub_control:337: typeReq 2303 wValue 8 wIndex 5
[    7.848078][    T1] vhci_hcd: vhci_hub_control:552:  SetPortFeature: USB_PORT_FEAT_POWER
[    7.852825][    T1] vhci_hcd vhci_hcd.0: vhci_hub_control port 4
[    7.856205][    T1] vhci_hcd: dump_port_status_diff:129: status prev -> new: 00000000 -> 00000200
[    7.858037][    T1] vhci_hcd: dump_port_status_diff:143:  +POWER
[    7.858037][    T1] vhci_hcd: dump_port_status_diff:151: 
[    7.858037][    T1] vhci_hcd: vhci_hub_control:656:  bye
[    7.866915][    T1] vhci_hcd: vhci_hub_control:337: typeReq 2303 wValue 8 wIndex 6
[    7.867308][   T11] usb 1-1: Dual-Role OTG device on HNP port
[    7.867835][    T1] vhci_hcd: vhci_hub_control:552:  SetPortFeature: USB_PORT_FEAT_POWER
[    7.866915][    T1] vhci_hcd: vhci_hub_control:337: typeReq 2303 wValue 8 wIndex 6
[    7.867308][   T11] usb 1-1: Dual-Role OTG device on HNP port
[    7.867835][    T1] vhci_hcd: vhci_hub_control:552:  SetPortFeature: USB_PORT_FEAT_POWER
[    7.875484][    T1] vhci_hcd vhci_hcd.0: vhci_hub_control port 5
[    7.877308][   T11] usb 1-1: New USB device found, idVendor=1a0a, idProduct=badd, bcdDevice= 7.01
[    7.877813][    T1] vhci_hcd: dump_port_status_diff:129: status prev -> new: 00000000 -> 00000200
[    7.879169][   T11] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    7.877813][    T1] vhci_hcd: dump_port_status_diff:143:  +POWER
[    7.881442][   T11] usb 1-1: Product: Gadget Zero
[    7.877813][    T1] vhci_hcd: dump_port_status_diff:151: 
[    7.877813][    T1] vhci_hcd: vhci_hub_control:656:  bye
[    7.882882][   T11] usb 1-1: Manufacturer: Linux 7.1.0-rc5-00007-g73cf422c6afb with dummy_udc
[    7.883625][    T1] vhci_hcd: vhci_hub_control:337: typeReq 2303 wValue 8 wIndex 7
[    7.884559][   T11] usb 1-1: SerialNumber: 0123456789.0123456789.0123456789
[    7.877308][   T11] usb 1-1: New USB device found, idVendor=1a0a, idProduct=badd, bcdDevice= 7.01
[    7.885567][    T1] vhci_hcd: vhci_hub_control:552:  SetPortFeature: USB_PORT_FEAT_POWER
[    7.877813][    T1] vhci_hcd: dump_port_status_diff:129: status prev -> new: 00000000 -> 00000200
[    7.879169][   T11] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    7.877813][    T1] vhci_hcd: dump_port_status_diff:143:  +POWER
[    7.881442][   T11] usb 1-1: Product: Gadget Zero
[    7.877813][    T1] vhci_hcd: dump_port_status_diff:151: 
[    7.877813][    T1] vhci_hcd: vhci_hub_control:656:  bye
[    7.882882][   T11] usb 1-1: Manufacturer: Linux 7.1.0-rc5-00007-g73cf422c6afb with dummy_udc
[    7.883625][    T1] vhci_hcd: vhci_hub_control:337: typeReq 2303 wValue 8 wIndex 7
[    7.884559][   T11] usb 1-1: SerialNumber: 0123456789.0123456789.0123456789
[    7.885567][    T1] vhci_hcd: vhci_hub_control:552:  SetPortFeature: USB_PORT_FEAT_POWER
[    7.893554][    T1] vhci_hcd vhci_hcd.0: vhci_hub_control port 6
[    7.893554][    T1] vhci_hcd: dump_port_status_diff:129: status prev -> new: 00000000 -> 00000200
[    7.893554][    T1] vhci_hcd: dump_port_status_diff:143:  +POWER
[    7.893554][    T1] vhci_hcd: dump_port_status_diff:151: 
[    7.893554][    T1] vhci_hcd: vhci_hub_control:656:  bye
[    7.928851][    T1] vhci_hcd: vhci_hub_control:337: typeReq 2303 wValue 8 wIndex 8
[    7.933362][    T1] vhci_hcd: vhci_hub_control:552:  SetPortFeature: USB_PORT_FEAT_POWER
[    7.937895][    T1] vhci_hcd vhci_hcd.0: vhci_hub_control port 7
[    7.938658][    T1] vhci_hcd: dump_port_status_diff:129: status prev -> new: 00000000 -> 00000200
[    7.938658][    T1] vhci_hcd: dump_port_status_diff:143:  +POWER
[    7.938658][    T1] vhci_hcd: dump_port_status_diff:151: 
[    7.938658][    T1] vhci_hcd: vhci_hub_control:656:  bye
[    7.954728][   T37] vhci_hcd: vhci_hub_control:337: typeReq a300 wValue 0 wIndex 1
[    7.954855][    T1] vhci_hcd: vhci_hcd_probe:1407: bye
[    7.956111][   T37] vhci_hcd: vhci_hub_control:436:  GetPortStatus port 1
[    7.957166][    T1] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[    7.957330][   T37] vhci_hcd: vhci_hub_control:498:  GetPortStatus bye 200 0
[    7.954728][   T37] vhci_hcd: vhci_hub_control:337: typeReq a300 wValue 0 wIndex 1
[    7.957330][   T37] vhci_hcd vhci_hcd.0: vhci_hub_control port 0
[    7.957330][   T37] vhci_hcd: dump_port_status_diff:129: status prev -> new: 00000200 -> 00000200
[    7.957944][   T37] vhci_hcd: dump_port_status_diff:143:   POWER
[    7.957944][   T37] vhci_hcd: dump_port_status_diff:151: 
[    7.954855][    T1] vhci_hcd: vhci_hcd_probe:1407: bye
[    7.954728][   T37] vhci_hcd: vhci_hub_control:337: typeReq a300 wValue 0 wIndex 1
[    7.961003][    T1] serio: i8042 KBD port at 0x60,0x64 irq 1
[    7.956111][   T37] vhci_hcd: vhci_hub_control:436:  GetPortStatus port 1
[    7.954855][    T1] vhci_hcd: vhci_hcd_probe:1407: bye
[    7.957944][   T37] vhci_hcd: vhci_hub_control:656:  bye
[    7.957166][    T1] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[    7.956111][   T37] vhci_hcd: vhci_hub_control:436:  GetPortStatus port 1
[    7.962818][    T1] serio: i8042 AUX port at 0x60,0x64 irq 12
[    7.957330][   T37] vhci_hcd: vhci_hub_control:498:  GetPortStatus bye 200 0
[    7.957166][    T1] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[    7.964000][   T37] vhci_hcd: vhci_hub_control:337: typeReq a300 wValue 0 wIndex 2
[    7.957330][   T37] vhci_hcd vhci_hcd.0: vhci_hub_control port 0
[    7.957330][   T37] vhci_hcd: vhci_hub_control:498:  GetPortStatus bye 200 0
[    7.957330][   T37] vhci_hcd: dump_port_status_diff:129: status prev -> new: 00000200 -> 00000200
[    7.978083][    T1] mousedev: PS/2 mouse device common for all mice
[    7.978620][   T37] vhci_hcd: vhci_hub_control:436:  GetPortStatus port 2
[    7.957944][   T37] vhci_hcd: dump_port_status_diff:143:   POWER
[    7.957330][   T37] vhci_hcd vhci_hcd.0: vhci_hub_control port 0
[    7.981772][    T1] usbcore: registered new interface driver iforce
[    7.981985][   T37] vhci_hcd: vhci_hub_control:498:  GetPortStatus bye 200 0
[    7.983113][    T1] usbcore: registered new interface driver pxrc
[    7.983570][   T37] vhci_hcd vhci_hcd.0: vhci_hub_control port 1
[    7.984766][    T1] usbcore: registered new interface driver xpad
[    7.985006][   T37] vhci_hcd: dump_port_status_diff:129: status prev -> new: 00000200 -> 00000200
[    7.985867][    T1] usbcore: registered new interface driver usb_acecad
[    7.986803][   T37] vhci_hcd: dump_port_status_diff:143:   POWER
[    7.988091][    T1] usbcore: registered new interface driver aiptek
[    7.987969][   T37] vhci_hcd: dump_port_status_diff:151: 
[    7.989364][    T1] usbcore: registered new interface driver hanwang
[    7.987969][   T37] vhci_hcd: vhci_hub_control:656:  bye
[    7.991089][    T1] usbcore: registered new interface driver kbtab
[    7.992069][   T37] vhci_hcd: vhci_hub_control:337: typeReq a300 wValue 0 wIndex 3
[    7.992659][    T1] usbcore: registered new interface driver pegasus_notetaker
[    7.993411][   T37] vhci_hcd: vhci_hub_control:436:  GetPortStatus port 3
[    7.994693][    T1] usbcore: registered new interface driver ati_remote2
[    7.995081][   T37] vhci_hcd: vhci_hub_control:498:  GetPortStatus bye 200 0
[    7.995986][    T1] cm109: Keymap for Komunikate KIP1000 phone loaded
[    7.996705][   T37] vhci_hcd vhci_hcd.0: vhci_hub_control port 2
[    7.997898][    T1] usbcore: registered new interface driver cm109
[    7.998320][   T37] vhci_hcd: dump_port_status_diff:129: status prev -> new: 00000200 -> 00000200
[    7.999068][    T1] cm109: CM109 phone driver: 20080805 (C) Alfred E. Heggestad
[    7.999551][    T1] usbcore: registered new interface driver ims_pcu
[    8.000174][   T37] vhci_hcd: dump_port_status_diff:143:   POWER
[    8.001206][    T1] usbcore: registered new interface driver keyspan_remote
[    8.001627][   T37] vhci_hcd: dump_port_status_diff:151: 
[    8.003154][    T1] usbcore: registered new interface driver powermate
[    8.001627][   T37] vhci_hcd: vhci_hub_control:656:  bye
[    8.004552][    T1] wistron_btns: System unknown
[    8.004947][   T37] vhci_hcd: vhci_hub_control:337: typeReq a300 wValue 0 wIndex 4
[    8.005624][    T1] usbcore: registered new interface driver yealink
[    8.006006][   T37] vhci_hcd: vhci_hub_control:436:  GetPortStatus port 4
[    8.006910][    T1] ideapad_slidebar: DMI does not match
[    7.957944][   T37] vhci_hcd: dump_port_status_diff:151: 
[    7.957330][   T37] vhci_hcd: dump_port_status_diff:129: status prev -> new: 00000200 -> 00000200
[    8.007654][   T37] vhci_hcd: vhci_hub_control:498:  GetPortStatus bye 200 0
[    8.007664][   T37] vhci_hcd vhci_hcd.0: vhci_hub_control port 3
[    8.007670][   T37] vhci_hcd: dump_port_status_diff:129: status prev -> new: 00000200 -> 00000200
[    8.007674][   T37] vhci_hcd: dump_port_status_diff:143:   POWER
[    7.961003][    T1] serio: i8042 KBD port at 0x60,0x64 irq 1
[    8.007679][   T37] vhci_hcd: dump_port_status_diff:151: 
[    8.007682][   T37] vhci_hcd: vhci_hub_control:656:  bye
[    8.007942][   T37] vhci_hcd: vhci_hub_control:337: typeReq a300 wValue 0 wIndex 5
[    8.014702][    T1] i2c_dev: i2c /dev entries driver
[    8.017986][   T37] vhci_hcd: vhci_hub_control:436:  GetPortStatus port 5
[    8.023122][    T1] usbcore: registered new interface driver i2c-cp2615
[    7.957944][   T37] vhci_hcd: vhci_hub_control:656:  bye
[    8.024476][   T37] vhci_hcd: vhci_hub_control:498:  GetPortStatus bye 200 0
[    8.031461][    T1] usbcore: registered new interface driver RobotFuzz Open Source InterFace, OSIF
[    8.027897][   T37] vhci_hcd vhci_hcd.0: vhci_hub_control port 4
[    8.033226][    T1] usbcore: registered new interface driver i2c-tiny-usb
[    8.027897][   T37] vhci_hcd: dump_port_status_diff:129: status prev -> new: 00000200 -> 00000200
[    8.036235][    T1] isa i2c-pca-isa.0: Please specify I/O base
[    8.027897][   T37] vhci_hcd: dump_port_status_diff:143:   POWER
[    8.027897][   T37] vhci_hcd: dump_port_status_diff:151: 
[    8.027897][   T37] vhci_hcd: vhci_hub_control:656:  bye
[    8.038083][   T37] vhci_hcd: vhci_hub_control:337: typeReq a300 wValue 0 wIndex 6
[    8.041578][    T1] ir_imon_decoder: IR iMON protocol handler initialized
[    8.041904][   T37] vhci_hcd: vhci_hub_control:436:  GetPortStatus port 6
[    8.043145][    T1] IR RC5(x/sz) protocol handler initialized
[    8.044616][   T37] vhci_hcd: vhci_hub_control:498:  GetPortStatus bye 200 0
[    7.962818][    T1] serio: i8042 AUX port at 0x60,0x64 irq 12
[    7.957944][   T37] vhci_hcd: dump_port_status_diff:143:   POWER
[    8.045685][    T1] IR RC6 protocol handler initialized
[    7.964000][   T37] vhci_hcd: vhci_hub_control:337: typeReq a300 wValue 0 wIndex 2
[    7.957944][   T37] vhci_hcd: dump_port_status_diff:151: 
[    8.046801][   T37] vhci_hcd vhci_hcd.0: vhci_hub_control port 5
[    7.978083][    T1] mousedev: PS/2 mouse device common for all mice
[    7.961003][    T1] serio: i8042 KBD port at 0x60,0x64 irq 1
[    8.048314][    T1] IR RCMM protocol handler initialized
[    7.978620][   T37] vhci_hcd: vhci_hub_control:436:  GetPortStatus port 2
[    7.957944][   T37] vhci_hcd: vhci_hub_control:656:  bye
[    8.047715][   T37] vhci_hcd: dump_port_status_diff:129: status prev -> new: 00000200 -> 00000200
[    7.981772][    T1] usbcore: registered new interface driver iforce
[    7.962818][    T1] serio: i8042 AUX port at 0x60,0x64 irq 12
[    8.050003][    T1] IR SANYO protocol handler initialized
[    7.981985][   T37] vhci_hcd: vhci_hub_control:498:  GetPortStatus bye 200 0
[    7.964000][   T37] vhci_hcd: vhci_hub_control:337: typeReq a300 wValue 0 wIndex 2
[    8.050009][    T1] IR Sony protocol handler initialized
[    7.983113][    T1] usbcore: registered new interface driver pxrc
[    7.978083][    T1] mousedev: PS/2 mouse device common for all mice
[    8.050019][    T1] IR XMP protocol handler initialized
[    7.983570][   T37] vhci_hcd vhci_hcd.0: vhci_hub_control port 1
[    7.978620][   T37] vhci_hcd: vhci_hub_control:436:  GetPortStatus port 2
[    8.047715][   T37] vhci_hcd: dump_port_status_diff:143:   POWER
[    7.984766][    T1] usbcore: registered new interface driver xpad
[    7.981772][    T1] usbcore: registered new interface driver iforce
[    8.052318][    T1] ngene: nGene PCIE bridge driver, Copyright (C) 2005-2007 Micronas
[    7.985006][   T37] vhci_hcd: dump_port_status_diff:129: status prev -> new: 00000200 -> 00000200
[    7.981985][   T37] vhci_hcd: vhci_hub_control:498:  GetPortStatus bye 200 0
[    8.047715][   T37] vhci_hcd: dump_port_status_diff:151: 
[    7.985867][    T1] usbcore: registered new interface driver usb_acecad
[    7.983113][    T1] usbcore: registered new interface driver pxrc
[    8.054537][    T1] pps_ldisc: PPS line discipline registered
[    7.986803][   T37] vhci_hcd: dump_port_status_diff:143:   POWER
[    7.983570][   T37] vhci_hcd vhci_hcd.0: vhci_hub_control port 1
[    8.047715][   T37] vhci_hcd: vhci_hub_control:656:  bye
[    7.988091][    T1] usbcore: registered new interface driver aiptek
[    7.984766][    T1] usbcore: registered new interface driver xpad
[    7.987969][   T37] vhci_hcd: dump_port_status_diff:151: 
[    7.985006][   T37] vhci_hcd: dump_port_status_diff:129: status prev -> new: 00000200 -> 00000200
[    7.989364][    T1] usbcore: registered new interface driver hanwang
[    7.985867][    T1] usbcore: registered new interface driver usb_acecad
[    7.987969][   T37] vhci_hcd: vhci_hub_control:656:  bye
[    7.986803][   T37] vhci_hcd: dump_port_status_diff:143:   POWER
[    7.991089][    T1] usbcore: registered new interface driver kbtab
[    7.988091][    T1] usbcore: registered new interface driver aiptek
[    7.992069][   T37] vhci_hcd: vhci_hub_control:337: typeReq a300 wValue 0 wIndex 3
[    7.987969][   T37] vhci_hcd: dump_port_status_diff:151: 
[    7.992659][    T1] usbcore: registered new interface driver pegasus_notetaker
[    7.989364][    T1] usbcore: registered new interface driver hanwang
[    7.993411][   T37] vhci_hcd: vhci_hub_control:436:  GetPortStatus port 3
[    7.987969][   T37] vhci_hcd: vhci_hub_control:656:  bye
[    7.994693][    T1] usbcore: registered new interface driver ati_remote2
[    7.991089][    T1] usbcore: registered new interface driver kbtab
[    7.995081][   T37] vhci_hcd: vhci_hub_control:498:  GetPortStatus bye 200 0
[    7.992069][   T37] vhci_hcd: vhci_hub_control:337: typeReq a300 wValue 0 wIndex 3
[    7.995986][    T1] cm109: Keymap for Komunikate KIP1000 phone loaded
[    7.992659][    T1] usbcore: registered new interface driver pegasus_notetaker
[    7.996705][   T37] vhci_hcd vhci_hcd.0: vhci_hub_control port 2
[    7.993411][   T37] vhci_hcd: vhci_hub_control:436:  GetPortStatus port 3
[    7.997898][    T1] usbcore: registered new interface driver cm109
[    7.994693][    T1] usbcore: registered new interface driver ati_remote2
[    7.998320][   T37] vhci_hcd: dump_port_status_diff:129: status prev -> new: 00000200 -> 00000200
[    7.995081][   T37] vhci_hcd: vhci_hub_control:498:  GetPortStatus bye 200 0
[    7.999068][    T1] cm109: CM109 phone driver: 20080805 (C) Alfred E. Heggestad
[    7.995986][    T1] cm109: Keymap for Komunikate KIP1000 phone loaded
[    7.999551][    T1] usbcore: registered new interface driver ims_pcu
[    7.996705][   T37] vhci_hcd vhci_hcd.0: vhci_hub_control port 2
[    8.000174][   T37] vhci_hcd: dump_port_status_diff:143:   POWER
[    7.997898][    T1] usbcore: registered new interface driver cm109
[    8.001206][    T1] usbcore: registered new interface driver keyspan_remote
[    7.998320][   T37] vhci_hcd: dump_port_status_diff:129: status prev -> new: 00000200 -> 00000200
[    8.001627][   T37] vhci_hcd: dump_port_status_diff:151: 
[    7.999068][    T1] cm109: CM109 phone driver: 20080805 (C) Alfred E. Heggestad
[    8.003154][    T1] usbcore: registered new interface driver powermate
[    7.999551][    T1] usbcore: registered new interface driver ims_pcu
[    8.001627][   T37] vhci_hcd: vhci_hub_control:656:  bye
[    8.000174][   T37] vhci_hcd: dump_port_status_diff:143:   POWER
[    8.004552][    T1] wistron_btns: System unknown
[    8.001206][    T1] usbcore: registered new interface driver keyspan_remote
[    8.004947][   T37] vhci_hcd: vhci_hub_control:337: typeReq a300 wValue 0 wIndex 4
[    8.001627][   T37] vhci_hcd: dump_port_status_diff:151: 
[    8.005624][    T1] usbcore: registered new interface driver yealink
[    8.003154][    T1] usbcore: registered new interface driver powermate
[    8.006006][   T37] vhci_hcd: vhci_hub_control:436:  GetPortStatus port 4
[    8.001627][   T37] vhci_hcd: vhci_hub_control:656:  bye
[    8.006910][    T1] ideapad_slidebar: DMI does not match
[    8.004552][    T1] wistron_btns: System unknown
[    8.007654][   T37] vhci_hcd: vhci_hub_control:498:  GetPortStatus bye 200 0
[    8.004947][   T37] vhci_hcd: vhci_hub_control:337: typeReq a300 wValue 0 wIndex 4
[    8.007664][   T37] vhci_hcd vhci_hcd.0: vhci_hub_control port 3
[    8.005624][    T1] usbcore: registered new interface driver yealink
[    8.007670][   T37] vhci_hcd: dump_port_status_diff:129: status prev -> new: 00000200 -> 00000200
[    8.006006][   T37] vhci_hcd: vhci_hub_control:436:  GetPortStatus port 4
[    8.007674][   T37] vhci_hcd: dump_port_status_diff:143:   POWER
[    8.006910][    T1] ideapad_slidebar: DMI does not match
[    8.007679][   T37] vhci_hcd: dump_port_status_diff:151: 
[    8.007654][   T37] vhci_hcd: vhci_hub_control:498:  GetPortStatus bye 200 0
[    8.007682][   T37] vhci_hcd: vhci_hub_control:656:  bye
[    8.007664][   T37] vhci_hcd vhci_hcd.0: vhci_hub_control port 3
[    8.007942][   T37] vhci_hcd: vhci_hub_control:337: typeReq a300 wValue 0 wIndex 5
[    8.007670][   T37] vhci_hcd: dump_port_status_diff:129: status prev -> new: 00000200 -> 00000200
[    8.014702][    T1] i2c_dev: i2c /dev entries driver
[    8.007674][   T37] vhci_hcd: dump_port_status_diff:143:   POWER
[    8.017986][   T37] vhci_hcd: vhci_hub_control:436:  GetPortStatus port 5
[    8.007679][   T37] vhci_hcd: dump_port_status_diff:151: 
[    8.023122][    T1] usbcore: registered new interface driver i2c-cp2615
[    8.007682][   T37] vhci_hcd: vhci_hub_control:656:  bye
[    8.024476][   T37] vhci_hcd: vhci_hub_control:498:  GetPortStatus bye 200 0
[    8.007942][   T37] vhci_hcd: vhci_hub_control:337: typeReq a300 wValue 0 wIndex 5
[    8.031461][    T1] usbcore: registered new interface driver RobotFuzz Open Source InterFace, OSIF
[    8.014702][    T1] i2c_dev: i2c /dev entries driver
[    8.027897][   T37] vhci_hcd vhci_hcd.0: vhci_hub_control port 4
[    8.017986][   T37] vhci_hcd: vhci_hub_control:436:  GetPortStatus port 5
[    8.033226][    T1] usbcore: registered new interface driver i2c-tiny-usb
[    8.023122][    T1] usbcore: registered new interface driver i2c-cp2615
[    8.027897][   T37] vhci_hcd: dump_port_status_diff:129: status prev -> new: 00000200 -> 00000200
[    8.024476][   T37] vhci_hcd: vhci_hub_control:498:  GetPortStatus bye 200 0
[    8.036235][    T1] isa i2c-pca-isa.0: Please specify I/O base
[    8.031461][    T1] usbcore: registered new interface driver RobotFuzz Open Source InterFace, OSIF
[    8.027897][   T37] vhci_hcd: dump_port_status_diff:143:   POWER
[    8.027897][   T37] vhci_hcd vhci_hcd.0: vhci_hub_control port 4
[    8.027897][   T37] vhci_hcd: dump_port_status_diff:151: 
[    8.033226][    T1] usbcore: registered new interface driver i2c-tiny-usb
[    8.027897][   T37] vhci_hcd: vhci_hub_control:656:  bye
[    8.027897][   T37] vhci_hcd: dump_port_status_diff:129: status prev -> new: 00000200 -> 00000200
[    8.038083][   T37] vhci_hcd: vhci_hub_control:337: typeReq a300 wValue 0 wIndex 6
[    8.036235][    T1] isa i2c-pca-isa.0: Please specify I/O base
[    8.041578][    T1] ir_imon_decoder: IR iMON protocol handler initialized
[    8.027897][   T37] vhci_hcd: dump_port_status_diff:143:   POWER
[    8.041904][   T37] vhci_hcd: vhci_hub_control:436:  GetPortStatus port 6
[    8.027897][   T37] vhci_hcd: dump_port_status_diff:151: 
[    8.043145][    T1] IR RC5(x/sz) protocol handler initialized
[    8.027897][   T37] vhci_hcd: vhci_hub_control:656:  bye
[    8.044616][   T37] vhci_hcd: vhci_hub_control:498:  GetPortStatus bye 200 0
[    8.038083][   T37] vhci_hcd: vhci_hub_control:337: typeReq a300 wValue 0 wIndex 6
[    8.045685][    T1] IR RC6 protocol handler initialized
[    8.041578][    T1] ir_imon_decoder: IR iMON protocol handler initialized
[    8.046801][   T37] vhci_hcd vhci_hcd.0: vhci_hub_control port 5
[    8.041904][   T37] vhci_hcd: vhci_hub_control:436:  GetPortStatus port 6
[    8.048314][    T1] IR RCMM protocol handler initialized
[    8.043145][    T1] IR RC5(x/sz) protocol handler initialized
[    8.047715][   T37] vhci_hcd: dump_port_status_diff:129: status prev -> new: 00000200 -> 00000200
[    8.044616][   T37] vhci_hcd: vhci_hub_control:498:  GetPortStatus bye 200 0
[    8.050003][    T1] IR SANYO protocol handler initialized
[    8.045685][    T1] IR RC6 protocol handler initialized
[    8.050009][    T1] IR Sony protocol handler initialized
[    8.046801][   T37] vhci_hcd vhci_hcd.0: vhci_hub_control port 5
[    8.050019][    T1] IR XMP protocol handler initialized
[    8.048314][    T1] IR RCMM protocol handler initialized
[    8.047715][   T37] vhci_hcd: dump_port_status_diff:143:   POWER
[    8.047715][   T37] vhci_hcd: dump_port_status_diff:129: status prev -> new: 00000200 -> 00000200
[    8.052318][    T1] ngene: nGene PCIE bridge driver, Copyright (C) 2005-2007 Micronas
[    8.050003][    T1] IR SANYO protocol handler initialized
[    8.047715][   T37] vhci_hcd: dump_port_status_diff:151: 
[    8.050009][    T1] IR Sony protocol handler initialized
[    8.054537][    T1] pps_ldisc: PPS line discipline registered
[    8.050019][    T1] IR XMP protocol handler initialized
[    8.047715][   T37] vhci_hcd: vhci_hub_control:656:  bye
[    8.047715][   T37] vhci_hcd: dump_port_status_diff:143:   POWER
[    8.052318][    T1] ngene: nGene PCIE bridge driver, Copyright (C) 2005-2007 Micronas
[    8.047715][   T37] vhci_hcd: dump_port_status_diff:151: 
[    8.054537][    T1] pps_ldisc: PPS line discipline registered
[    8.047715][   T37] vhci_hcd: vhci_hub_control:656:  bye
[    8.250409][   T37] vhci_hcd: vhci_hub_control:337: typeReq a300 wValue 0 wIndex 7
[    8.251030][   T32] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[    8.251356][   T37] vhci_hcd: vhci_hub_control:436:  GetPortStatus port 7
[    8.250409][   T37] vhci_hcd: vhci_hub_control:337: typeReq a300 wValue 0 wIndex 7
[    8.251374][   T37] vhci_hcd: vhci_hub_control:498:  GetPortStatus bye 200 0
[    8.251030][   T32] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[    8.251382][   T37] vhci_hcd vhci_hcd.0: vhci_hub_control port 6
[    8.251356][   T37] vhci_hcd: vhci_hub_control:436:  GetPortStatus port 7
[    8.260880][    T1] Driver for 1-wire Dallas network protocol.
[    8.259459][   T37] vhci_hcd: dump_port_status_diff:129: status prev -> new: 00000200 -> 00000200
[    8.262912][    T1] usbcore: registered new interface driver DS9490R
[    8.259459][   T37] vhci_hcd: dump_port_status_diff:143:   POWER
[    8.251374][   T37] vhci_hcd: vhci_hub_control:498:  GetPortStatus bye 200 0
[    8.251356][   T37] vhci_hcd: vhci_hub_control:436:  GetPortStatus port 7
[    8.251382][   T37] vhci_hcd vhci_hcd.0: vhci_hub_control port 6
[    8.251374][   T37] vhci_hcd: vhci_hub_control:498:  GetPortStatus bye 200 0
[    8.260880][    T1] Driver for 1-wire Dallas network protocol.
[    8.251382][   T37] vhci_hcd vhci_hcd.0: vhci_hub_control port 6
[    8.259459][   T37] vhci_hcd: dump_port_status_diff:129: status prev -> new: 00000200 -> 00000200
[    8.271640][    T1] w83781d: Detection failed at step 2
[    8.267266][   T37] vhci_hcd: dump_port_status_diff:151: 
[    8.262912][    T1] usbcore: registered new interface driver DS9490R
[    8.274433][    T1] applesmc: supported laptop not found!
[    8.267266][   T37] vhci_hcd: vhci_hub_control:656:  bye
[    8.275561][    T1] applesmc: driver init failed (ret=-19)!
[    8.276349][   T37] vhci_hcd: vhci_hub_control:337: typeReq a300 wValue 0 wIndex 8
[    8.259459][   T37] vhci_hcd: dump_port_status_diff:143:   POWER
[    8.278561][    T1] f71882fg: Not a Fintek device
[    8.278800][   T37] vhci_hcd: vhci_hub_control:436:  GetPortStatus port 8
[    8.279747][    T1] f71882fg: Not a Fintek device
[    8.280464][   T37] vhci_hcd: vhci_hub_control:498:  GetPortStatus bye 200 0
[    8.271640][    T1] w83781d: Detection failed at step 2
[    8.260880][    T1] Driver for 1-wire Dallas network protocol.
[    8.267266][   T37] vhci_hcd: dump_port_status_diff:151: 
[    8.259459][   T37] vhci_hcd: dump_port_status_diff:129: status prev -> new: 00000200 -> 00000200
[    8.274433][    T1] applesmc: supported laptop not found!
[    8.262912][    T1] usbcore: registered new interface driver DS9490R
[    8.267266][   T37] vhci_hcd: vhci_hub_control:656:  bye
[    8.259459][   T37] vhci_hcd: dump_port_status_diff:143:   POWER
[    8.275561][    T1] applesmc: driver init failed (ret=-19)!
[    8.289535][    T1] pc87360: PC8736x not detected, module not inserted
[    8.288040][   T37] vhci_hcd vhci_hcd.0: vhci_hub_control port 7
[    8.276349][   T37] vhci_hcd: vhci_hub_control:337: typeReq a300 wValue 0 wIndex 8
[    8.271640][    T1] w83781d: Detection failed at step 2
[    8.278561][    T1] f71882fg: Not a Fintek device
[    8.293637][    T1] intel_powerclamp: CPU does not support MWAIT
[    8.288040][   T37] vhci_hcd: dump_port_status_diff:129: status prev -> new: 00000200 -> 00000200
[    8.295529][    T1] Bluetooth: HCI UART driver ver 2.3
[    8.288040][   T37] vhci_hcd: dump_port_status_diff:143:   POWER
[    8.296822][    T1] Bluetooth: HCI UART protocol H4 registered
[    8.288040][   T37] vhci_hcd: dump_port_status_diff:151: 
[    8.288040][   T37] vhci_hcd: vhci_hub_control:656:  bye
[    8.298141][   T37] vhci_hcd: vhci_hub_control:337: typeReq 2303 wValue 1b wIndex 1
[    8.298555][    T1] Bluetooth: HCI UART protocol BCSP registered
[    8.299198][   T37] vhci_hcd: vhci_hub_control:601:  SetPortFeature: default 27
[    8.300170][    T1] Bluetooth: HCI UART protocol ATH3K registered
[    8.301063][   T37] vhci_hcd vhci_hcd.0: vhci_hub_control port 0
[    8.302188][    T1] Bluetooth: HCI UART protocol Three-wire (H5) registered
[    8.302932][   T37] vhci_hcd: dump_port_status_diff:129: status prev -> new: 00000200 -> 08000200
[    8.303957][    T1] Bluetooth: HCI UART protocol AG6XX registered
[    8.304657][   T37] vhci_hcd: dump_port_status_diff:143:   POWER
[    8.278800][   T37] vhci_hcd: vhci_hub_control:436:  GetPortStatus port 8
[    8.305921][    T1] Bluetooth: HCI UART protocol Marvell registered
[    8.306855][   T37] vhci_hcd: dump_port_status_diff:143:  +R27
[    8.309588][    T1] Bluetooth: HCI UART protocol AML registered
[    8.309267][   T37] vhci_hcd: dump_port_status_diff:151: 
[    8.311147][    T1] usbcore: registered new interface driver bcm203x
[    8.309267][   T37] vhci_hcd: vhci_hub_control:656:  bye
[    8.313089][    T1] usbcore: registered new interface driver bpa10x
[    8.326213][   T37] vhci_hcd: vhci_hub_control:337: typeReq 2303 wValue 1b wIndex 2
[    8.326235][   T37] vhci_hcd: vhci_hub_control:601:  SetPortFeature: default 27
[    8.326244][   T37] vhci_hcd vhci_hcd.0: vhci_hub_control port 1
[    8.326251][   T37] vhci_hcd: dump_port_status_diff:129: status prev -> new: 00000200 -> 08000200
[    8.326257][   T37] vhci_hcd: dump_port_status_diff:143:   POWER
[    8.326262][   T37] vhci_hcd: dump_port_status_diff:143:  +R27
[    8.326266][   T37] vhci_hcd: dump_port_status_diff:151: 
[    8.326270][   T37] vhci_hcd: vhci_hub_control:656:  bye
[    8.326318][   T37] vhci_hcd: vhci_hub_control:337: typeReq 2303 wValue 1b wIndex 3
[    8.326325][   T37] vhci_hcd: vhci_hub_control:601:  SetPortFeature: default 27
[    8.326330][   T37] vhci_hcd vhci_hcd.0: vhci_hub_control port 2
[    8.279747][    T1] f71882fg: Not a Fintek device
[    8.267266][   T37] vhci_hcd: dump_port_status_diff:151: 
[    8.326334][   T37] vhci_hcd: dump_port_status_diff:129: status prev -> new: 00000200 -> 08000200
[    8.280464][   T37] vhci_hcd: vhci_hub_control:498:  GetPortStatus bye 200 0
[    8.274433][    T1] applesmc: supported laptop not found!
[    8.326339][   T37] vhci_hcd: dump_port_status_diff:143:   POWER
[    8.289535][    T1] pc87360: PC8736x not detected, module not inserted
[    8.267266][   T37] vhci_hcd: vhci_hub_control:656:  bye
[    8.326343][   T37] vhci_hcd: dump_port_status_diff:143:  +R27
[    8.288040][   T37] vhci_hcd vhci_hcd.0: vhci_hub_control port 7
[    8.275561][    T1] applesmc: driver init failed (ret=-19)!
[    8.326346][   T37] vhci_hcd: dump_port_status_diff:151: 
[    8.293637][    T1] intel_powerclamp: CPU does not support MWAIT
[    8.276349][   T37] vhci_hcd: vhci_hub_control:337: typeReq a300 wValue 0 wIndex 8
[    8.326349][   T37] vhci_hcd: vhci_hub_control:656:  bye
[    8.288040][   T37] vhci_hcd: dump_port_status_diff:129: status prev -> new: 00000200 -> 00000200
[    8.278561][    T1] f71882fg: Not a Fintek device
[    8.326408][   T37] vhci_hcd: vhci_hub_control:337: typeReq 2303 wValue 1b wIndex 4
[    8.295529][    T1] Bluetooth: HCI UART driver ver 2.3
[    8.278800][   T37] vhci_hcd: vhci_hub_control:436:  GetPortStatus port 8
[    8.326418][   T37] vhci_hcd: vhci_hub_control:601:  SetPortFeature: default 27
[    8.288040][   T37] vhci_hcd: dump_port_status_diff:143:   POWER
[    8.279747][    T1] f71882fg: Not a Fintek device
[    8.326424][   T37] vhci_hcd vhci_hcd.0: vhci_hub_control port 3
[    8.296822][    T1] Bluetooth: HCI UART protocol H4 registered
[    8.280464][   T37] vhci_hcd: vhci_hub_control:498:  GetPortStatus bye 200 0
[    8.326428][   T37] vhci_hcd: dump_port_status_diff:129: status prev -> new: 00000200 -> 08000200
[    8.288040][   T37] vhci_hcd: dump_port_status_diff:151: 
[    8.289535][    T1] pc87360: PC8736x not detected, module not inserted
[    8.326437][   T37] vhci_hcd: dump_port_status_diff:143:   POWER
[    8.288040][   T37] vhci_hcd: vhci_hub_control:656:  bye
[    8.288040][   T37] vhci_hcd vhci_hcd.0: vhci_hub_control port 7
[    8.326442][   T37] vhci_hcd: dump_port_status_diff:143:  +R27
[    8.298141][   T37] vhci_hcd: vhci_hub_control:337: typeReq 2303 wValue 1b wIndex 1
[    8.293637][    T1] intel_powerclamp: CPU does not support MWAIT
[    8.326450][   T37] vhci_hcd: dump_port_status_diff:151: 
[    8.298555][    T1] Bluetooth: HCI UART protocol BCSP registered
[    8.288040][   T37] vhci_hcd: dump_port_status_diff:129: status prev -> new: 00000200 -> 00000200
[    8.326456][   T37] vhci_hcd: vhci_hub_control:656:  bye
[    8.299198][   T37] vhci_hcd: vhci_hub_control:601:  SetPortFeature: default 27
[    8.295529][    T1] Bluetooth: HCI UART driver ver 2.3
[    8.326627][   T37] vhci_hcd: vhci_hub_control:337: typeReq 2303 wValue 1b wIndex 5
[    8.300170][    T1] Bluetooth: HCI UART protocol ATH3K registered
[    8.288040][   T37] vhci_hcd: dump_port_status_diff:143:   POWER
[    8.326636][   T37] vhci_hcd: vhci_hub_control:601:  SetPortFeature: default 27
[    8.301063][   T37] vhci_hcd vhci_hcd.0: vhci_hub_control port 0
[    8.296822][    T1] Bluetooth: HCI UART protocol H4 registered
[    8.328173][    T1] usbcore: registered new interface driver bfusb
[    8.302188][    T1] Bluetooth: HCI UART protocol Three-wire (H5) registered
[    8.288040][   T37] vhci_hcd: dump_port_status_diff:151: 
[    8.328772][   T37] vhci_hcd vhci_hcd.0: vhci_hub_control port 4
[    8.302932][   T37] vhci_hcd: dump_port_status_diff:129: status prev -> new: 00000200 -> 08000200
[    8.288040][   T37] vhci_hcd: vhci_hub_control:656:  bye
[    8.330197][    T1] usbcore: registered new interface driver btusb
[    8.303957][    T1] Bluetooth: HCI UART protocol AG6XX registered
[    8.298141][   T37] vhci_hcd: vhci_hub_control:337: typeReq 2303 wValue 1b wIndex 1
[    8.331264][   T37] vhci_hcd: dump_port_status_diff:129: status prev -> new: 00000200 -> 08000200
[    8.304657][   T37] vhci_hcd: dump_port_status_diff:143:   POWER
[    8.298555][    T1] Bluetooth: HCI UART protocol BCSP registered
[    8.333091][    T1] usbcore: registered new interface driver ath3k
[    8.305921][    T1] Bluetooth: HCI UART protocol Marvell registered
[    8.299198][   T37] vhci_hcd: vhci_hub_control:601:  SetPortFeature: default 27
[    8.333566][   T37] vhci_hcd: dump_port_status_diff:143:   POWER
[    8.306855][   T37] vhci_hcd: dump_port_status_diff:143:  +R27
[    8.300170][    T1] Bluetooth: HCI UART protocol ATH3K registered
[    8.335663][    T1] cpufreq_nforce2: No nForce2 chipset
[    8.309588][    T1] Bluetooth: HCI UART protocol AML registered
[    8.301063][   T37] vhci_hcd vhci_hcd.0: vhci_hub_control port 0
[    8.335997][   T37] vhci_hcd: dump_port_status_diff:143:  +R27
[    8.309267][   T37] vhci_hcd: dump_port_status_diff:151: 
[    8.302188][    T1] Bluetooth: HCI UART protocol Three-wire (H5) registered
[    8.337979][    T1] wbsd: Winbond W83L51xD SD/MMC card interface driver
[    8.311147][    T1] usbcore: registered new interface driver bcm203x
[    8.302932][   T37] vhci_hcd: dump_port_status_diff:129: status prev -> new: 00000200 -> 08000200
[    8.335997][   T37] vhci_hcd: dump_port_status_diff:151: 
[    8.309267][   T37] vhci_hcd: vhci_hub_control:656:  bye
[    8.303957][    T1] Bluetooth: HCI UART protocol AG6XX registered
[    8.339013][    T1] wbsd: Copyright(c) Pierre Ossman
[    8.313089][    T1] usbcore: registered new interface driver bpa10x
[    8.304657][   T37] vhci_hcd: dump_port_status_diff:143:   POWER
[    8.339510][    T1] VUB300 Driver rom wait states = 1C irqpoll timeout = 0400
[    8.326213][   T37] vhci_hcd: vhci_hub_control:337: typeReq 2303 wValue 1b wIndex 2
[    8.305921][    T1] Bluetooth: HCI UART protocol Marvell registered
[    8.335997][   T37] vhci_hcd: vhci_hub_control:656:  bye
[    8.326235][   T37] vhci_hcd: vhci_hub_control:601:  SetPortFeature: default 27
[    8.306855][   T37] vhci_hcd: dump_port_status_diff:143:  +R27
[    8.326244][   T37] vhci_hcd vhci_hcd.0: vhci_hub_control port 1
[    8.309588][    T1] Bluetooth: HCI UART protocol AML registered
[    8.326251][   T37] vhci_hcd: dump_port_status_diff:129: status prev -> new: 00000200 -> 08000200
[    8.309267][   T37] vhci_hcd: dump_port_status_diff:151: 
[    8.326257][   T37] vhci_hcd: dump_port_status_diff:143:   POWER
[    8.311147][    T1] usbcore: registered new interface driver bcm203x
[    8.326262][   T37] vhci_hcd: dump_port_status_diff:143:  +R27
[    8.309267][   T37] vhci_hcd: vhci_hub_control:656:  bye
[    8.326266][   T37] vhci_hcd: dump_port_status_diff:151: 
[    8.313089][    T1] usbcore: registered new interface driver bpa10x
[    8.326270][   T37] vhci_hcd: vhci_hub_control:656:  bye
[    8.326213][   T37] vhci_hcd: vhci_hub_control:337: typeReq 2303 wValue 1b wIndex 2
[    8.326318][   T37] vhci_hcd: vhci_hub_control:337: typeReq 2303 wValue 1b wIndex 3
[    8.326235][   T37] vhci_hcd: vhci_hub_control:601:  SetPortFeature: default 27
[    8.326325][   T37] vhci_hcd: vhci_hub_control:601:  SetPortFeature: default 27
[    8.326244][   T37] vhci_hcd vhci_hcd.0: vhci_hub_control port 1
[    8.326330][   T37] vhci_hcd vhci_hcd.0: vhci_hub_control port 2
[    8.326251][   T37] vhci_hcd: dump_port_status_diff:129: status prev -> new: 00000200 -> 08000200
[    8.326334][   T37] vhci_hcd: dump_port_status_diff:129: status prev -> new: 00000200 -> 08000200
[    8.326257][   T37] vhci_hcd: dump_port_status_diff:143:   POWER
[    8.326339][   T37] vhci_hcd: dump_port_status_diff:143:   POWER
[    8.326262][   T37] vhci_hcd: dump_port_status_diff:143:  +R27
[    8.326343][   T37] vhci_hcd: dump_port_status_diff:143:  +R27
[    8.326266][   T37] vhci_hcd: dump_port_status_diff:151: 
[    8.326346][   T37] vhci_hcd: dump_port_status_diff:151: 
[    8.326270][   T37] vhci_hcd: vhci_hub_control:656:  bye
[    8.326349][   T37] vhci_hcd: vhci_hub_control:656:  bye
[    8.326318][   T37] vhci_hcd: vhci_hub_control:337: typeReq 2303 wValue 1b wIndex 3
[    8.326408][   T37] vhci_hcd: vhci_hub_control:337: typeReq 2303 wValue 1b wIndex 4
[    8.326325][   T37] vhci_hcd: vhci_hub_control:601:  SetPortFeature: default 27
[    8.326418][   T37] vhci_hcd: vhci_hub_control:601:  SetPortFeature: default 27
[    8.326330][   T37] vhci_hcd vhci_hcd.0: vhci_hub_control port 2
[    8.326424][   T37] vhci_hcd vhci_hcd.0: vhci_hub_control port 3
[    8.326334][   T37] vhci_hcd: dump_port_status_diff:129: status prev -> new: 00000200 -> 08000200
[    8.326428][   T37] vhci_hcd: dump_port_status_diff:129: status prev -> new: 00000200 -> 08000200
[    8.326339][   T37] vhci_hcd: dump_port_status_diff:143:   POWER
[    8.326437][   T37] vhci_hcd: dump_port_status_diff:143:   POWER
[    8.326343][   T37] vhci_hcd: dump_port_status_diff:143:  +R27
[    8.326442][   T37] vhci_hcd: dump_port_status_diff:143:  +R27
[    8.326346][   T37] vhci_hcd: dump_port_status_diff:151: 
[    8.326450][   T37] vhci_hcd: dump_port_status_diff:151: 
[    8.326349][   T37] vhci_hcd: vhci_hub_control:656:  bye
[    8.326456][   T37] vhci_hcd: vhci_hub_control:656:  bye
[    8.326408][   T37] vhci_hcd: vhci_hub_control:337: typeReq 2303 wValue 1b wIndex 4
[    8.326627][   T37] vhci_hcd: vhci_hub_control:337: typeReq 2303 wValue 1b wIndex 5
[    8.326418][   T37] vhci_hcd: vhci_hub_control:601:  SetPortFeature: default 27
[    8.326636][   T37] vhci_hcd: vhci_hub_control:601:  SetPortFeature: default 27
[    8.326424][   T37] vhci_hcd vhci_hcd.0: vhci_hub_control port 3
[    8.328173][    T1] usbcore: registered new interface driver bfusb
[    8.326428][   T37] vhci_hcd: dump_port_status_diff:129: status prev -> new: 00000200 -> 08000200
[    8.328772][   T37] vhci_hcd vhci_hcd.0: vhci_hub_control port 4
[    8.326437][   T37] vhci_hcd: dump_port_status_diff:143:   POWER
[    8.330197][    T1] usbcore: registered new interface driver btusb
[    8.326442][   T37] vhci_hcd: dump_port_status_diff:143:  +R27
[    8.331264][   T37] vhci_hcd: dump_port_status_diff:129: status prev -> new: 00000200 -> 08000200
[    8.326450][   T37] vhci_hcd: dump_port_status_diff:151: 
[    8.333091][    T1] usbcore: registered new interface driver ath3k
[    8.326456][   T37] vhci_hcd: vhci_hub_control:656:  bye
[    8.333566][   T37] vhci_hcd: dump_port_status_diff:143:   POWER
[    8.326627][   T37] vhci_hcd: vhci_hub_control:337: typeReq 2303 wValue 1b wIndex 5
[    8.335663][    T1] cpufreq_nforce2: No nForce2 chipset
[    8.326636][   T37] vhci_hcd: vhci_hub_control:601:  SetPortFeature: default 27
[    8.335997][   T37] vhci_hcd: dump_port_status_diff:143:  +R27
[    8.328173][    T1] usbcore: registered new interface driver bfusb
[    8.337979][    T1] wbsd: Winbond W83L51xD SD/MMC card interface driver
[    8.328772][   T37] vhci_hcd vhci_hcd.0: vhci_hub_control port 4
[    8.335997][   T37] vhci_hcd: dump_port_status_diff:151: 
[    8.330197][    T1] usbcore: registered new interface driver btusb
[    8.339013][    T1] wbsd: Copyright(c) Pierre Ossman
[    8.331264][   T37] vhci_hcd: dump_port_status_diff:129: status prev -> new: 00000200 -> 08000200
[    8.339510][    T1] VUB300 Driver rom wait states = 1C irqpoll timeout = 0400
[    8.333091][    T1] usbcore: registered new interface driver ath3k
[    8.335997][   T37] vhci_hcd: vhci_hub_control:656:  bye
[    8.333566][   T37] vhci_hcd: dump_port_status_diff:143:   POWER
[    8.335663][    T1] cpufreq_nforce2: No nForce2 chipset
[    8.335997][   T37] vhci_hcd: dump_port_status_diff:143:  +R27
[    8.337979][    T1] wbsd: Winbond W83L51xD SD/MMC card interface driver
[    8.335997][   T37] vhci_hcd: dump_port_status_diff:151: 
[    8.339013][    T1] wbsd: Copyright(c) Pierre Ossman
[    8.339510][    T1] VUB300 Driver rom wait states = 1C irqpoll timeout = 0400
[    8.335997][   T37] vhci_hcd: vhci_hub_control:656:  bye
[    8.503254][   T37] vhci_hcd: vhci_hub_control:337: typeReq 2303 wValue 1b wIndex 6
[    8.503711][    T1] usbcore: registered new interface driver vub300
[    8.504161][   T37] vhci_hcd: vhci_hub_control:601:  SetPortFeature: default 27
[    8.505533][    T1] usbcore: registered new interface driver ushc
[    8.506175][   T37] vhci_hcd vhci_hcd.0: vhci_hub_control port 5
[    8.503254][   T37] vhci_hcd: vhci_hub_control:337: typeReq 2303 wValue 1b wIndex 6
[    8.503711][    T1] usbcore: registered new interface driver vub300
[    8.504161][   T37] vhci_hcd: vhci_hub_control:601:  SetPortFeature: default 27
[    8.505533][    T1] usbcore: registered new interface driver ushc
[    8.506175][   T37] vhci_hcd vhci_hcd.0: vhci_hub_control port 5
[    8.512636][   T37] vhci_hcd: dump_port_status_diff:129: status prev -> new: 00000200 -> 08000200
[    8.512636][   T37] vhci_hcd: dump_port_status_diff:143:   POWER
[    8.529727][    T1] Driver for HIFN 795x crypto accelerator chip has been successfully registered.
[    8.512636][   T37] vhci_hcd: dump_port_status_diff:143:  +R27
[    8.529727][    T1] Driver for HIFN 795x crypto accelerator chip has been successfully registered.
[    8.512636][   T37] vhci_hcd: dump_port_status_diff:143:  +R27
[    8.533265][   T37] vhci_hcd: dump_port_status_diff:151: 
[    8.533265][   T37] vhci_hcd: vhci_hub_control:656:  bye
[    8.545284][   T37] vhci_hcd: vhci_hub_control:337: typeReq 2303 wValue 1b wIndex 7
[    8.548668][   T37] vhci_hcd: vhci_hub_control:601:  SetPortFeature: default 27
[    8.551828][   T37] vhci_hcd vhci_hcd.0: vhci_hub_control port 6
[    8.554130][   T37] vhci_hcd: dump_port_status_diff:129: status prev -> new: 00000200 -> 08000200
[    8.557257][   T37] vhci_hcd: dump_port_status_diff:143:   POWER
[    8.557257][   T37] vhci_hcd: dump_port_status_diff:143:  +R27
[    8.557257][   T37] vhci_hcd: dump_port_status_diff:151: 
[    8.557257][   T37] vhci_hcd: vhci_hub_control:656:  bye
[    8.566406][   T37] vhci_hcd: vhci_hub_control:337: typeReq 2303 wValue 1b wIndex 8
[    8.569475][   T37] vhci_hcd: vhci_hub_control:601:  SetPortFeature: default 27
[    8.572439][   T37] vhci_hcd vhci_hcd.0: vhci_hub_control port 7
[    8.574742][   T37] vhci_hcd: dump_port_status_diff:129: status prev -> new: 00000200 -> 08000200
[    8.577308][   T37] vhci_hcd: dump_port_status_diff:143:   POWER
[    8.577308][   T37] vhci_hcd: dump_port_status_diff:143:  +R27
[    8.577308][   T37] vhci_hcd: dump_port_status_diff:151: 
[    8.577308][   T37] vhci_hcd: vhci_hub_control:656:  bye
[    8.587168][   T37] usb usb3: vhci_bus_suspend
[    8.602507][    T1] comedi: version 0.7.76 - http://www.comedi.org
[    8.608887][    T1] usbcore: registered new interface driver dt9812
[    8.612432][    T1] usbcore: registered new interface driver ni6501
[    8.616156][    T1] usbcore: registered new interface driver usbduxfast
[    8.620346][    T1] usbcore: registered new interface driver usbduxsigma
[    8.624363][    T1] usbcore: registered new interface driver vmk80xx
[    8.629689][    T1] gpib_common: GPIB core driver
[    8.639272][    T1] usbcore: registered new interface driver lpvo_usb_gpib
[    8.644049][    T1] acerhdf: Acer Aspire One Fan driver, v.0.7.0
[    8.648987][    T1] acerhdf: unknown (unsupported) BIOS version QEMU/Standard PC (i440FX + PIIX, 1996)/1.16.3-debian-1.16.3-2, please report, aborting!
[    8.654450][    T1] acer_wmi: Acer Laptop ACPI-WMI Extras
[    8.656530][    T1] acer_wmi: No or unsupported WMI interface, unable to load
[    8.659487][    T1] amd_hsmp: HSMP interface is either disabled or not supported on family:6 model:2a
[    8.663697][    T1] fujitsu_tablet: Unknown (using defaults)
[    8.665938][    T1] hdaps: supported laptop not found!
[    8.667955][    T1] hdaps: driver init failed (ret=-19)!
[    8.671040][    T1] intel_oaktrail: Platform not recognized (You could try the module's force-parameter)
[    8.672822][    T1] topstar_laptop: ACPI extras driver loaded
[    8.686722][    T1] SPI driver sensorhub has no spi_device_id for samsung,sensorhub-rinato
[    8.690025][    T1] SPI driver sensorhub has no spi_device_id for samsung,sensorhub-thermostat
[    8.698968][    T1] SPI driver rm3100-spi has no spi_device_id for pni,rm3100
[    8.705357][    T1] Software Queue-Pair Transport over NTB, version 4
[    8.712293][    T1] pktgen: Packet Generator for packet performance testing. Version: 2.75
[    8.722646][    T1] drop_monitor: Initializing network drop monitor service
[    8.728015][    T1] netem: version 1.3
[    8.733474][    T1] u32 classifier
[    8.735454][    T1]     Performance counters on
[    8.742325][    T1]     input device check on
[    8.745328][    T1] ipip: IPv4 and MPLS over IPv4 tunneling driver
[    8.750908][    T1] IPv4 over IPsec tunneling driver
[    8.755837][    T1] NET: Registered PF_PACKET protocol family
[    8.758734][    T1] PFKEY is deprecated and scheduled to be removed in 2027, please contact the netdev mailing list
[    8.762772][    T1] NET: Registered PF_KEY protocol family
[    8.765410][    T1] NET: Registered PF_X25 protocol family
[    8.767790][    T1] X25: Linux Version 0.2
[    8.769458][    T1] can: controller area network core
[    8.771605][    T1] NET: Registered PF_CAN protocol family
[    8.773883][    T1] can: raw protocol
[    8.775563][    T1] can: broadcast manager protocol
[    8.777785][    T1] can: netlink gateway - max_hops=1
[    8.780148][    T1] can: SAE J1939
[    8.781719][    T1] can: isotp protocol (max_pdu_size 8300)
[    8.784654][    T1] Bluetooth: RFCOMM socket layer initialized
[    8.787690][    T1] Bluetooth: RFCOMM ver 1.11
[    8.790065][    T1] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    8.793029][    T1] Bluetooth: BNEP filters: protocol 
[    8.795465][    T1] Bluetooth: BNEP socket layer initialized
[    8.798489][    T1] NET: Registered PF_RXRPC protocol family
[    8.801284][    T1] Key type rxrpc registered
[    8.803260][    T1] Key type rxrpc_s registered
[    8.805746][    T1] NET: Registered PF_PHONET protocol family
[    8.809246][    T1] 8021q: 802.1Q VLAN Support v1.8
[    8.818022][    T1] NET: Registered PF_RDS protocol family
[    8.823117][    T1] Registered RDS/tcp transport
[    8.826796][    T1] tipc: Activated (version 2.0.0)
[    8.833441][    T1] NET: Registered PF_TIPC protocol family
[    8.837127][    T1] tipc: Started in single node mode
[    8.842506][    T1] 9pnet: Installing 9P2000 support
[    8.845597][    T1] NET: Registered PF_IEEE802154 protocol family
[    8.849293][    T1] Key type ceph registered
[    8.852490][    T1] libceph: loaded (mon/osd proto 15/24)
[    8.856176][    T1] batman_adv: B.A.T.M.A.N. advanced 2025.5 (compatibility version 15) loaded
[    8.860208][    T1] openvswitch: Open vSwitch switching datapath
[    8.862771][    T1] mpls_gso: MPLS GSO support
[    8.869269][    T1] microcode: Current revision: 0x00000001
[    8.872119][    T1] IPI shorthand broadcast: enabled
[    8.874147][    T1] ... APIC ID:      00000000 (0)
[    8.876013][    T1] ... APIC VERSION: 00050014
[    8.877233][    T1] 0000000000000000000000000000000000000000000000000000000000000000
[    8.877233][    T1] 0000000000000000000000000000000000000000000000000000000000001000
[    8.877233][    T1] 
[    8.887841][    T1] number of MP IRQ sources: 15.
[    8.889731][    T1] number of IO-APIC #0 registers: 24.
[    8.891813][    T1] testing the IO APIC.......................
[    8.894085][    T1] IO APIC #0......
[    8.895515][    T1] .... register #00: 00000000
[    8.897302][    T1] .......    : physical APIC id: 00
[    8.899275][    T1] .......    : Delivery Type: 0
[    8.901429][    T1] .......    : LTS          : 0
[    8.903291][    T1] .... register #01: 00170011
[    8.905065][    T1] .......     : max redirection entries: 17
[    8.907312][    T1] .......     : PRQ implemented: 0
[    8.909241][    T1] .......     : IO APIC version: 11
[    8.916170][    T1] .... register #02: 00000000
[    8.918763][    T1] .......     : arbitration: 00
[    8.921546][    T1] .... IRQ redirection table:
[    8.924130][    T1] IOAPIC 0:
[    8.925940][    T1]  pin00, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0)
[    8.931056][    T1]  pin01, enabled , edge , high, V(22), IRR(0), S(0), logical , D(0001), M(0)
[    8.935969][    T1]  pin02, enabled , edge , high, V(30), IRR(0), S(0), logical , D(0001), M(0)
[    8.941029][    T1]  pin03, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0)
[    8.945939][    T1]  pin04, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0)
[    8.951151][    T1]  pin05, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0)
[    8.956253][    T1]  pin06, enabled , edge , high, V(20), IRR(0), S(0), logical , D(0001), M(0)
[    8.960316][    T1]  pin07, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0)
[    8.963682][    T1]  pin08, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0)
[    8.967032][    T1]  pin09, enabled , level, high, V(20), IRR(0), S(0), logical , D(0002), M(0)
[    8.970490][    T1]  pin0a, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0)
[    8.973837][    T1]  pin0b, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0)
[    8.977151][    T1]  pin0c, enabled , edge , high, V(22), IRR(0), S(0), logical , D(0002), M(0)
[    8.980573][    T1]  pin0d, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0)
[    8.983928][    T1]  pin0e, enabled , edge , high, V(21), IRR(0), S(0), logical , D(0002), M(0)
[    8.987315][    T1]  pin0f, enabled , edge , high, V(21), IRR(0), S(0), logical , D(0001), M(0)
[    8.990663][    T1]  pin10, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0)
[    8.993997][    T1]  pin11, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0)
[    8.997328][    T1]  pin12, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0)
[    9.000672][    T1]  pin13, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0)
[    9.003995][    T1]  pin14, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0)
[    9.007350][    T1]  pin15, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0)
[    9.011413][    T1]  pin16, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0)
[    9.024474][    T1]  pin17, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0)
[    9.029436][    T1] IRQ to pin mappings:
[    9.031843][    T1] IRQ0 -> 0:2
[    9.033784][    T1] IRQ1 -> 0:1
[    9.035722][    T1] IRQ3 -> 0:3
[    9.037658][    T1] IRQ4 -> 0:4
[    9.039568][    T1] IRQ5 -> 0:5
[    9.041549][    T1] IRQ6 -> 0:6
[    9.043456][    T1] IRQ7 -> 0:7
[    9.045321][    T1] IRQ8 -> 0:8
[    9.047166][    T1] IRQ9 -> 0:9
[    9.049066][    T1] IRQ10 -> 0:10
[    9.050937][    T1] IRQ11 -> 0:11
[    9.052463][    T1] IRQ12 -> 0:12
[    9.053959][    T1] IRQ13 -> 0:13
[    9.055343][    T1] IRQ14 -> 0:14
[    9.056710][    T1] IRQ15 -> 0:15
[    9.058144][    T1] .................................... done.
[    9.321676][    T1] sched_clock: Marking stable (9124806684, 193038212)->(9351827231, -33982335)
[    9.523813][    T1] zswap: loaded using pool lzo
[    9.535231][    T1] page_owner is disabled
[    9.545270][    T1] Key type .fscrypt registered
[    9.549032][    T1] Key type fscrypt-provisioning registered
[    9.566909][    T1] Btrfs loaded, assert=on, zoned=no, fsverity=yes
[    9.569800][    T1] Key type big_key registered
[    9.571646][    T1] Key type encrypted registered
[    9.576562][    T1] netconsole: network logging started
[    9.578866][    T1] gtp: GTP module loaded (pdp ctx size 84 bytes)
[    9.584766][    T1] 8021q: adding VLAN 0 to HW filter on device bond0
[    9.592766][    T1] 8021q: adding VLAN 0 to HW filter on device eth0
[    9.607338][    T1] Sending DHCP requests .
[    9.607451][    T1] Unknown ARP type 0xfffe for device wwan0
[    9.617092][    T1] Unknown ARP type 0xfffe for device wwan1
[    9.626469][   T32] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[    9.617092][    T1] Unknown ARP type 0xfffe for device wwan1
[    9.626469][   T32] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[   11.787518][    T1] .
[   11.788442][    T1] Unknown ARP type 0xfffe for device wwan0
[   11.796213][    T1] ,
[   11.796333][    T1] Unknown ARP type 0xfffe for device wwan0
[   11.802379][    T1]  OK
[   11.804447][    T1] IP-Config: Got DHCP answer from 10.0.2.2, my address is 10.0.2.15
[   11.809314][    T1] IP-Config: Complete:
[   11.815923][    T1]      device=eth0, hwaddr=52:54:00:12:34:56, ipaddr=10.0.2.15, mask=255.255.255.0, gw=10.0.2.2
[   11.836735][    T1]      host=vm-meta-89, domain=, nis-domain=(none)
[   11.842638][    T1]      bootserver=10.0.2.2, rootserver=10.0.2.2, rootpath=
[   11.842656][    T1]      nameserver0=10.0.2.3
[   11.853595][    T1] clk: Disabling unused clocks
[   11.856414][    T1] PM: genpd: Disabling unused power domains
[   11.859230][    T1] kunit: disabled
[   11.882234][    T1] Freeing unused kernel image (initmem) memory: 2252K
[   11.884887][    T1] Write protecting kernel text and read-only data: 67640k
[   11.887374][    T1] Run /init as init process
[   11.888935][    T1]   with arguments:
[   11.890328][    T1]     /init
[   11.891434][    T1]   with environment:
[   11.892821][    T1]     HOME=/
[   11.893970][    T1]     TERM=linux
[   11.895214][    T1]     RESULT_ROOT=/result/trinity/group-01-5-300s/vm-snb/yocto-i386-minimal-20190520.cgz/i386-randconfig-007-20260527/clang-20/73cf422c6afb067b7e5d395dae8c44e076a00ebb/0
[   11.901083][    T1]     branch=linux-next/master
[   11.902744][    T1]     job=/lkp/jobs/scheduled/vm-meta-89/trinity-group-01-5-300s-yocto-i386-minimal-20190520.cgz-i386-randconfig-007-20260527-73cf422c6afb-20260527-28926-1ckg32-0.yaml
[   11.910707][    T1]     user=lkp
[   11.912499][    T1]     ARCH=i386
[   11.926498][    T1]     kconfig=i386-randconfig-007-20260527
[   11.929742][    T1]     commit=73cf422c6afb067b7e5d395dae8c44e076a00ebb
[   11.933162][    T1]     intremap=posted_msi
[   11.935332][    T1]     audit=0
[   11.937027][    T1]     ia32_emulation=on
[   11.939264][    T1]     max_uptime=7200
[   11.941451][    T1]     LKP_SERVER=internal-lkp-server
[   11.944086][    T1]     selinux=0
[   11.945925][    T1]     nmi_watchdog=panic
[   11.948114][    T1]     load_ramdisk=2
[   11.950211][    T1]     prompt_ramdisk=0
[   11.952297][    T1]     vga=normal
INIT: version 2.88 booting
[   12.045965][  T177] /dev/root: Can't lookup blockdev
[   12.048533][  T177] /dev/root: Can't lookup blockdev
[   12.050853][  T177] /dev/root: Can't lookup blockdev
[   12.053247][  T177] /dev/root: Can't lookup blockdev
[   12.055057][  T177] /dev/root: Can't lookup blockdev
[   12.056825][  T177] /dev/root: Can't lookup blockdev
[   12.058709][  T177] /dev/root: Can't lookup blockdev
[   12.060641][  T177] /dev/root: Can't lookup blockdev
[   12.062467][  T177] /dev/root: Can't lookup blockdev
[   12.064325][  T177] /dev/root: Can't lookup blockdev
[   12.066137][  T177] /dev/root: Can't lookup blockdev
[   12.068166][  T177] /dev/root: Can't lookup blockdev
[   12.070027][  T177] /dev/root: Can't lookup blockdev
[   12.071821][  T177] /dev/root: Can't lookup blockdev
[   12.073646][  T177] /dev/root: Can't lookup blockdev
[   12.075484][  T177] /dev/root: Can't lookup blockdev
[   12.077434][  T177] /dev/root: Can't lookup blockdev
Starting udev
[   12.160451][  T188] udevd[188]: starting version 3.2.7
[   14.717911][    C0] random: crng init done
[   14.731746][  T188] udevd[188]: specified group 'kvm' unknown
[   14.739453][  T189] udevd[189]: starting eudev-3.2.7
[   14.868109][  T189] udevd[189]: specified group 'kvm' unknown
[   15.148854][  T192] ------------[ cut here ]------------
[   15.150937][  T192] Looking for class "&cd->lock" with key sr_probe.__key, but found a different class "&disk->open_mutex" with the same key
[   15.154899][  T192] WARNING: kernel/locking/lockdep.c:944 at look_up_lock_class+0xfe/0x140, CPU#0: udevd/192
[   15.157990][  T192] Modules linked in:
[   15.159228][  T192] CPU: 0 UID: 0 PID: 192 Comm: udevd Not tainted 7.1.0-rc5-00007-g73cf422c6afb #1 PREEMPT(lazy)  9df36ae0f1aead0a85dee313de9d5bfe012b6acd
[   15.163724][  T192] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
[   15.166935][  T192] EIP: look_up_lock_class+0xfe/0x140
[   15.168594][  T192] Code: f8 64 fd 83 c4 08 0f 0b eb cd 80 3d e5 95 8f 45 00 75 8f c6 05 e5 95 8f 45 01 51 52 50 68 c7 4b f8 44 e8 c5 f8 64 fd 83 c4 10 <0f> 0b e9 71 ff ff ff b8 90 88 25 45 89 f2 e8 af 10 35 fe 83 3d 18
[   15.174645][  T192] EAX: 00000000 EBX: 465c09fc ECX: 00000000 EDX: 00000000
[   15.176847][  T192] ESI: 45f5dacc EDI: bf79d6b0 EBP: 494d1ae0 ESP: 494d1ad4
[   15.179052][  T192] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 EFLAGS: 00010006
[   15.181672][  T192] CR0: 80050033 CR2: 3f831928 CR3: 7e675000 CR4: 000406d0
[   15.183858][  T192] Call Trace:
[   15.184927][  T192]  ? register_lock_class+0x28/0x280
[   15.186594][  T192]  ? __lock_acquire+0x8d/0x29c0
[   15.188124][  T192]  ? blk_mq_free_request+0x9b/0xc0
[   15.189788][  T192]  ? scsi_test_unit_ready+0x7f/0x140
[   15.191460][  T192]  ? sr_revalidate_disk+0x40/0x240
[   15.193069][  T192]  ? lock_acquire+0x84/0x200
[   15.194534][  T192]  ? sr_block_open+0x62/0xc0
[   15.195998][  T192]  ? __mutex_lock_common+0x14b/0x1200
[   15.197692][  T192]  ? sr_block_open+0x62/0xc0
[   15.199148][  T192]  ? disk_check_media_change+0xc3/0x140
[   15.201094][  T192]  ? lockdep_hardirqs_on_prepare+0x163/0x240
[   15.202969][  T192]  ? mutex_lock_nested+0x21/0x40
[   15.204515][  T192]  ? sr_block_open+0x62/0xc0
[   15.205963][  T192]  ? sr_block_open+0x62/0xc0
[   15.207402][  T192]  ? blkdev_get_whole+0x22/0xc0
[   15.208937][  T192]  ? bdev_open+0x14e/0x340
[   15.210863][  T192]  ? blkdev_open+0xd7/0x100
[   15.212973][  T192]  ? blkdev_write_iter+0x200/0x200
[   15.215448][  T192]  ? do_dentry_open+0x318/0x680
[   15.217726][  T192]  ? inode_permission+0x29a/0x2c0
[   15.220026][  T192]  ? vfs_open+0x21/0x100
[   15.222005][  T192]  ? path_openat+0xedc/0x1200
[   15.224177][  T192]  ? do_file_open+0x10f/0x1c0
[   15.226381][  T192]  ? do_sys_openat2+0xab/0x240
[   15.228648][  T192]  ? __ia32_sys_openat+0x85/0xc0
[   15.231073][  T192]  ? ia32_sys_call+0x7ab/0x1140
[   15.233322][  T192]  ? do_int80_syscall_32+0xf0/0x2c0
[   15.235698][  T192]  ? _copy_to_user+0x5c/0x80
[   15.237840][  T192]  ? do_int80_syscall_32+0x12b/0x2c0
[   15.240356][  T192]  ? rcu_is_watching+0x36/0x80
[   15.242605][  T192]  ? do_int80_syscall_32+0xb6/0x2c0
[   15.245000][  T192]  ? entry_INT80_32+0xf0/0xf0
[   15.247150][  T192]  ? exc_page_fault+0x6b/0xc0
[   15.249320][  T192]  ? entry_INT80_32+0xf0/0xf0
[   15.251034][  T192] irq event stamp: 4795
[   15.252378][  T192] hardirqs last  enabled at (4795): [<439c4fae>] _raw_spin_unlock_irqrestore+0x2e/0xc0
[   15.255395][  T192] hardirqs last disabled at (4794): [<439c4d9c>] _raw_spin_lock_irqsave+0x1c/0x80
[   15.258260][  T192] softirqs last  enabled at (4654): [<43461140>] local_bh_enable+0x0/0x40
[   15.260941][  T192] softirqs last disabled at (4652): [<43461100>] local_bh_disable+0x0/0x40
[   15.263626][  T192] ---[ end trace 0000000000000000 ]---
[   15.265332][  T192] 
[   15.266134][  T192] ============================================
[   15.268046][  T192] WARNING: possible recursive locking detected
[   15.269993][  T192] 7.1.0-rc5-00007-g73cf422c6afb #1 Tainted: G        W          
[   15.272393][  T192] --------------------------------------------
[   15.274294][  T192] udevd/192 is trying to acquire lock:
[   15.275983][  T192] bf79d6b0 (&disk->open_mutex#3){+.+.}-{4:4}, at: sr_block_open+0x62/0xc0
[   15.278643][  T192] 
[   15.278643][  T192] but task is already holding lock:
[   15.278643][  T192] 
[   15.278643][  T192] but task is already holding lock:
[   15.278643][  T192] 
[   15.278643][  T192] but task is already holding lock:
[   15.280999][  T192] be109de4 (&disk->open_mutex#3){+.+.}-{4:4}, at: bdev_open+0x96/0x340
[   15.283580][  T192] 
[   15.283580][  T192] other info that might help us debug this:
[   15.283580][  T192] 
[   15.283580][  T192] other info that might help us debug this:
[   15.283580][  T192] 
[   15.283580][  T192] other info that might help us debug this:
[   15.286093][  T192]  Possible unsafe locking scenario:
[   15.286093][  T192] 
[   15.286093][  T192]  Possible unsafe locking scenario:
[   15.286093][  T192] 
[   15.286093][  T192]  Possible unsafe locking scenario:
[   15.286093][  T192] 
[   15.288426][  T192]        CPU0
[   15.289548][  T192]        ----
[   15.290628][  T192]   lock(&disk->open_mutex#3);
[   15.292137][  T192]   lock(&disk->open_mutex#3);
[   15.293654][  T192] 
[   15.293654][  T192]  *** DEADLOCK ***
[   15.293654][  T192] 
[   15.293654][  T192]  *** DEADLOCK ***
[   15.293654][  T192] 
[   15.293654][  T192]  *** DEADLOCK ***
[   15.293654][  T192] 
[   15.296224][  T192]  May be due to missing lock nesting notation
[   15.296224][  T192] 
[   15.296224][  T192]  May be due to missing lock nesting notation
[   15.296224][  T192] 
[   15.296224][  T192]  May be due to missing lock nesting notation
[   15.296224][  T192] 
[   15.298808][  T192] 1 lock held by udevd/192:
[   15.300292][  T192]  #0: be109de4 (&disk->open_mutex#3){+.+.}-{4:4}, at: bdev_open+0x96/0x340
[   15.302998][  T192] 
[   15.302998][  T192] stack backtrace:
[   15.302998][  T192] 
[   15.302998][  T192] stack backtrace:
[   15.302998][  T192] 
[   15.302998][  T192] stack backtrace:
[   15.304855][  T192] CPU: 0 UID: 0 PID: 192 Comm: udevd Tainted: G        W           7.1.0-rc5-00007-g73cf422c6afb #1 PREEMPT(lazy)  9df36ae0f1aead0a85dee313de9d5bfe012b6acd
[   15.304863][  T192] Tainted: [W]=WARN
[   15.304864][  T192] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
[   15.304866][  T192] Call Trace:
[   15.304869][  T192]  ? __dump_stack+0x18/0x40
[   15.304873][  T192]  ? dump_stack_lvl+0x7f/0x100
[   15.304877][  T192]  ? dump_stack+0xd/0x12
[   15.304881][  T192]  ? print_deadlock_bug+0x26b/0x280
[   15.304885][  T192]  ? __lock_acquire+0x23a1/0x29c0
[   15.304889][  T192]  ? blk_mq_free_request+0x9b/0xc0
[   15.304893][  T192]  ? scsi_test_unit_ready+0x7f/0x140
[   15.304905][  T192]  ? lock_acquire+0x84/0x200
[   15.304909][  T192]  ? sr_block_open+0x62/0xc0
[   15.304915][  T192]  ? __mutex_lock_common+0x14b/0x1200
[   15.304920][  T192]  ? sr_block_open+0x62/0xc0
[   15.304922][  T192]  ? disk_check_media_change+0xc3/0x140
[   15.304929][  T192]  ? lockdep_hardirqs_on_prepare+0x163/0x240
[   15.304936][  T192]  ? mutex_lock_nested+0x21/0x40
[   15.304939][  T192]  ? sr_block_open+0x62/0xc0
[   15.304943][  T192]  ? sr_block_open+0x62/0xc0
[   15.304947][  T192]  ? blkdev_get_whole+0x22/0xc0
[   15.304951][  T192]  ? bdev_open+0x14e/0x340
[   15.304959][  T192]  ? blkdev_open+0xd7/0x100
[   15.304966][  T192]  ? blkdev_write_iter+0x200/0x200
[   15.304972][  T192]  ? do_dentry_open+0x318/0x680
[   15.304978][  T192]  ? inode_permission+0x29a/0x2c0
[   15.304983][  T192]  ? vfs_open+0x21/0x100
[   15.304988][  T192]  ? path_openat+0xedc/0x1200
[   15.304998][  T192]  ? do_file_open+0x10f/0x1c0
[   15.305011][  T192]  ? do_sys_openat2+0xab/0x240
[   15.305017][  T192]  ? __ia32_sys_openat+0x85/0xc0
[   15.305022][  T192]  ? ia32_sys_call+0x7ab/0x1140
[   15.305026][  T192]  ? do_int80_syscall_32+0xf0/0x2c0
[   15.305032][  T192]  ? _copy_to_user+0x5c/0x80
[   15.305037][  T192]  ? do_int80_syscall_32+0x12b/0x2c0
[   15.305042][  T192]  ? rcu_is_watching+0x36/0x80
[   15.305048][  T192]  ? do_int80_syscall_32+0xb6/0x2c0
[   15.305052][  T192]  ? entry_INT80_32+0xf0/0xf0
[   15.305057][  T192]  ? exc_page_fault+0x6b/0xc0
[   15.305060][  T192]  ? entry_INT80_32+0xf0/0xf0
hwclock: can't open '/dev/misc/rtc': No such file or directory
INIT: Entering runlevel: 5
Configuring network interfaces... ip: RTNETLINK answers: File exists
hwclock: can't open '/dev/misc/rtc': No such file or directory
Starting syslogd/klogd: done
/etc/rc5.d/S77lkp-bootstrap: /lkp/jobs/scheduled/vm-meta-89/trinity-group-01-5-300s-yocto-i386-minimal-20190520.cgz-i386-randconfig-007-20260527-73cf422c6afb-20260527-28926-1ckg32-0.sh: line 128: start: not found
PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lkp/lkp/src/bin
LKP: stdout: 368: skip deploy intel ucode as no ucode is specified
LKP: ttyS0: 368: skip deploy intel ucode as no ucode is specified
[   16.350517][  T425] redirect stdout and stderr directly
[   16.350517][  T425] is_virt=true
[   16.350517][  T425] redirect stdout and stderr directly
[   16.350517][  T425] is_virt=true
[   16.350517][  T425] redirect stdout and stderr directly
[   16.350517][  T425] is_virt=true
LKP: ttyS0: 368: Kernel tests: Boot OK!
LKP: ttyS0: 368: HOSTNAME vm-snb, MAC c6:28:78:0e:35:97, kernel 7.1.0-rc5-00007-g73cf422c6afb 1
LKP: ttyS0: 368:  /lkp/lkp/src/bin/run-lkp /lkp/jobs/scheduled/vm-meta-89/trinity-group-01-5-300s-yocto-i386-minimal-20190520.cgz-i386-randconfig-007-20260527-73cf422c6afb-20260527-28926-1ckg32-0.yaml

Poky (Yocto Project Reference Distro) 2.7+snapshot vm-snb /dev/ttyS0

vm-snb login: [   21.397418][  T426] /lkp/lkp/src/bin/run-test: exec: line 88: /lkp/lkp/src/programs/trinity/run: not found
[   21.397418][  T426] /lkp/lkp/src/bin/run-test: exec: line 88: /lkp/lkp/src/programs/trinity/run: not found
LKP: ttyS0: 368: LKP: tbox cant kexec and rebooting forcely
[   34.182181][  T368] sysrq: Emergency Sync
[   34.184599][   T32] Emergency Sync complete
[   34.187490][  T368] sysrq: Resetting

Kboot worker: lkp-worker15
Elapsed time: 60

kvm=(
	qemu-system-x86_64
	-enable-kvm
	-cpu SandyBridge
	-kernel $kernel
	-initrd initrd-vm-meta-89.cgz
	-m 32768
	-smp 2
	-device e1000,netdev=net0
	-netdev user,id=net0,hostfwd=tcp::32032-:22
	-boot order=nc
	-no-reboot
	-device i6300esb
	-device pci-testdev
	-watchdog-action debug
	-rtc base=localtime
	-serial stdio
	-display none
	-monitor null
)

append=(
	ip=::::vm-meta-89::dhcp
	root=/dev/ram0
	RESULT_ROOT=/result/trinity/group-01-5-300s/vm-snb/yocto-i386-minimal-20190520.cgz/i386-randconfig-007-20260527/clang-20/73cf422c6afb067b7e5d395dae8c44e076a00ebb/0
	BOOT_IMAGE=/pkg/linux/i386-randconfig-007-20260527/clang-20/73cf422c6afb067b7e5d395dae8c44e076a00ebb/vmlinuz-7.1.0-rc5-00007-g73cf422c6afb
	branch=linux-next/master
	job=/job-script
	user=lkp
	ARCH=i386
	kconfig=i386-randconfig-007-20260527
	commit=73cf422c6afb067b7e5d395dae8c44e076a00ebb
	mem=4G
	intremap=posted_msi
	watchdog_thresh=240
	rcuperf.shutdown=0
	rcuscale.shutdown=0
	refscale.shutdown=0
	audit=0
	kunit.enable=0
	ia32_emulation=on
	max_uptime=7200
	result_service=tmpfs
	selinux=0
	debug
	apic=debug
	sysrq_always_enabled
	rcupdate.rcu_cpu_stall_timeout=100
	net.ifnames=0
	printk.devkmsg=on
	panic=-1
	softlockup_panic=1
	nmi_watchdog=panic
	oops=panic
	load_ramdisk=2
	prompt_ramdisk=0
	drbd.minor_count=8
	systemd.log_level=err
	ignore_loglevel
	console=tty0
	earlyprintk=ttyS0,115200
	console=ttyS0,115200
	vga=normal
	rw
	mem=4G
	earlycon=uart8250,io,0x3f8,115200n8
	keep_bootcon
)

"${kvm[@]}" -append "${append[*]}"
