early console in setup code
early console in extract_kernel
input_data: 0x026b7094
input_len: 0x0068579f
output: 0x01000000
output_len: 0x0152fa40
kernel_total_size: 0x01d93000
needed_size: 0x01d93000
Physical KASLR using RDTSC...

Decompressing Linux... Parsing ELF... Performing relocations... done.
Booting the kernel (entry_offset: 0x011d6838).
[    0.000000][    T0] Linux version 7.1.0-rc6-00030-g2bbdcd7eabfc (kbuild@2cc35b2b9699) (gcc-14 (Debian 14.2.0-19) 14.2.0, GNU ld (GNU Binutils for Debian) 2.44) #1 SMP PREEMPT Thu Jun  4 08:35:36 CST 2026
[    0.000000][    T0] KERNEL supported cpus:
[    0.000000][    T0]   Intel GenuineIntel
[    0.000000][    T0]   AMD AuthenticAMD
[    0.000000][    T0]   Hygon HygonGenuine
[    0.000000][    T0]   NSC Geode by NSC
[    0.000000][    T0]   Cyrix CyrixInstead
[    0.000000][    T0]   UMC UMC UMC UMC
[    0.000000][    T0]   zhaoxin   Shanghai  
[    0.000000][    T0]   Vortex Vortex86 SoC
[    0.000000][    T0] x86/CPU: Model not found in latest microcode list
[    0.000000][    T0] BIOS-provided physical RAM map:
[    0.000000][    T0] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff]  System RAM
[    0.000000][    T0] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff]  device reserved
[    0.000000][    T0] BIOS-e820: [gap 0x00000000000a0000-0x00000000000effff]
[    0.000000][    T0] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff]  device reserved
[    0.000000][    T0] BIOS-e820: [mem 0x0000000000100000-0x00000000bffdffff]  System RAM
[    0.000000][    T0] BIOS-e820: [mem 0x00000000bffe0000-0x00000000bfffffff]  device reserved
[    0.000000][    T0] BIOS-e820: [gap 0x00000000c0000000-0x00000000feffbfff]
[    0.000000][    T0] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff]  device reserved
[    0.000000][    T0] BIOS-e820: [gap 0x00000000ff000000-0x00000000fffbffff]
[    0.000000][    T0] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff]  device reserved
[    0.000000][    T0] BIOS-e820: [mem 0x0000000100000000-0x000000083fffffff]  System RAM
[    0.000000][    T0] e820: remove [mem 0x100000000-0xfffffffffffffffe] System RAM
[    0.000000][    T0] printk: debug: ignoring loglevel setting.
[    0.000000][    T0] printk: legacy bootconsole [earlyser0] enabled
[    0.000000][    T0] e820: remove [mem 0x100000000-0xfffffffffffffffe] System RAM
[    0.000000][    T0] earlycon: uart8250 at I/O port 0x3f8 (options '115200n8')
[    0.000000][    T0] printk: legacy bootconsole [uart8250] enabled
[    0.000000][    T0] Linux version 7.1.0-rc6-00030-g2bbdcd7eabfc (kbuild@2cc35b2b9699) (gcc-14 (Debian 14.2.0-19) 14.2.0, GNU ld (GNU Binutils for Debian) 2.44) #1 SMP PREEMPT Thu Jun  4 08:35:36 CST 2026
[    0.000000][    T0] KERNEL supported cpus:
[    0.000000][    T0]   Intel GenuineIntel
[    0.000000][    T0]   AMD AuthenticAMD
[    0.000000][    T0]   Hygon HygonGenuine
[    0.000000][    T0]   NSC Geode by NSC
[    0.000000][    T0]   Cyrix CyrixInstead
[    0.000000][    T0]   UMC UMC UMC UMC
[    0.000000][    T0]   zhaoxin   Shanghai  
[    0.000000][    T0]   Vortex Vortex86 SoC
[    0.000000][    T0] x86/CPU: Model not found in latest microcode list
[    0.000000][    T0] BIOS-provided physical RAM map:
[    0.000000][    T0] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff]  System RAM
[    0.000000][    T0] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff]  device reserved
[    0.000000][    T0] BIOS-e820: [gap 0x00000000000a0000-0x00000000000effff]
[    0.000000][    T0] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff]  device reserved
[    0.000000][    T0] BIOS-e820: [mem 0x0000000000100000-0x00000000bffdffff]  System RAM
[    0.000000][    T0] BIOS-e820: [mem 0x00000000bffe0000-0x00000000bfffffff]  device reserved
[    0.000000][    T0] BIOS-e820: [gap 0x00000000c0000000-0x00000000feffbfff]
[    0.000000][    T0] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff]  device reserved
[    0.000000][    T0] BIOS-e820: [gap 0x00000000ff000000-0x00000000fffbffff]
[    0.000000][    T0] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff]  device reserved
[    0.000000][    T0] BIOS-e820: [mem 0x0000000100000000-0x000000083fffffff]  System RAM
[    0.000000][    T0] e820: remove [mem 0x100000000-0xfffffffffffffffe] System RAM
[    0.000000][    T0] printk: debug: ignoring loglevel setting.
[    0.000000][    T0] printk: legacy bootconsole [earlyser0] enabled
[    0.000000][    T0] e820: remove [mem 0x100000000-0xfffffffffffffffe] System RAM
[    0.000000][    T0] earlycon: uart8250 at I/O port 0x3f8 (options '115200n8')
[    0.000000][    T0] printk: legacy bootconsole [uart8250] enabled
[    0.000000][    T0] printk: debug: skip boot console de-registration.
[    0.000000][    T0] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[    0.000000][    T0] APIC: Static calls initialized
[    0.000000][    T0] user-defined physical RAM map:
[    0.000000][    T0] user: [mem 0x0000000000000000-0x000000000009fbff]  System RAM
[    0.000000][    T0] user: [mem 0x000000000009fc00-0x000000000009ffff]  device reserved
[    0.000000][    T0] user: [gap 0x00000000000a0000-0x00000000000effff]
[    0.000000][    T0] user: [mem 0x00000000000f0000-0x00000000000fffff]  device reserved
[    0.000000][    T0] user: [mem 0x0000000000100000-0x00000000bffdffff]  System RAM
[    0.000000][    T0] user: [mem 0x00000000bffe0000-0x00000000bfffffff]  device reserved
[    0.000000][    T0] user: [gap 0x00000000c0000000-0x00000000feffbfff]
[    0.000000][    T0] user: [mem 0x00000000feffc000-0x00000000feffffff]  device reserved
[    0.000000][    T0] user: [gap 0x00000000ff000000-0x00000000fffbffff]
[    0.000000][    T0] user: [mem 0x00000000fffc0000-0x00000000ffffffff]  device reserved
[    0.000000][    T0] DMI: SMBIOS 2.8 present.
[    0.000000][    T0] DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
[    0.000000][    T0] DMI: Memory slots populated: 1/1
[    0.000000][    T0] Hypervisor detected: KVM
[    0.000000][    T0] last_pfn = 0xbffe0 max_arch_pfn = 0x100000
[    0.000000][    T0] kvm-clock: Using msrs 4b564d01 and 4b564d00
[    0.000002][    T0] kvm-clock: using sched offset of 460078667 cycles
[    0.000901][    T0] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[    0.003791][    T0] tsc: Detected 2294.610 MHz processor
[    0.005399][    T0] e820: update [mem 0x00000000-0x00000fff] System RAM ==> device reserved
[    0.006829][    T0] e820: remove [mem 0x000a0000-0x000fffff] System RAM
[    0.007868][    T0] last_pfn = 0xbffe0 max_arch_pfn = 0x100000
[    0.008751][    T0] x86/PAT: PAT support disabled because CONFIG_X86_PAT is disabled in the kernel.
[    0.010204][    T0] x86/PAT: Configuration [0-7]: WB  WT  UC- UC  WB  WT  UC- UC  
[    0.011474][    T0] initial memory mapped: [mem 0x00000000-0x17ffffff]
[    0.012512][    T0] RAMDISK: [mem 0x77925000-0x7fffffff]
[    0.013362][    T0] Allocated new RAMDISK: [mem 0x3e923000-0x46ffde66]
[    0.084105][    T0] Move RAMDISK from [mem 0x77925000-0x7ffffe66] to [mem 0x3e923000-0x46ffde66]
[    0.085512][    T0] ACPI: Early table checksum verification disabled
[    0.086690][    T0] ACPI: RSDP 0x00000000000F5290 000014 (v00 BOCHS )
[    0.087763][    T0] ACPI: RSDT 0x00000000BFFE23D1 000034 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.089194][    T0] ACPI: FACP 0x00000000BFFE227D 000074 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.090849][    T0] ACPI: DSDT 0x00000000BFFE0040 00223D (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.092380][    T0] ACPI: FACS 0x00000000BFFE0000 000040
[    0.093231][    T0] ACPI: APIC 0x00000000BFFE22F1 000080 (v03 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.094875][    T0] ACPI: HPET 0x00000000BFFE2371 000038 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.096427][    T0] ACPI: WAET 0x00000000BFFE23A9 000028 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.097985][    T0] ACPI: Reserving FACP table memory at [mem 0xbffe227d-0xbffe22f0]
[    0.099377][    T0] ACPI: Reserving DSDT table memory at [mem 0xbffe0040-0xbffe227c]
[    0.100610][    T0] ACPI: Reserving FACS table memory at [mem 0xbffe0000-0xbffe003f]
[    0.101898][    T0] ACPI: Reserving APIC table memory at [mem 0xbffe22f1-0xbffe2370]
[    0.103298][    T0] ACPI: Reserving HPET table memory at [mem 0xbffe2371-0xbffe23a8]
[    0.104600][    T0] ACPI: Reserving WAET table memory at [mem 0xbffe23a9-0xbffe23d0]
[    0.105878][    T0] Mapped APIC to         ffffc000 (        fee00000)
[    0.107070][    T0] 1935MB HIGHMEM available.
[    0.107774][    T0] 1135MB LOWMEM available.
[    0.108423][    T0]   mapped low ram: 0 - 46ffe000
[    0.109170][    T0]   low ram: 0 - 46ffe000
[    0.110246][    T0] ACPI: PM-Timer IO Port: 0x608
[    0.111093][    T0] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[    0.112106][    T0] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[    0.113265][    T0] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.114409][    T0] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 0, APIC INT 02
[    0.115726][    T0] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[    0.116942][    T0] Int: type 0, pol 1, trig 3, bus 00, IRQ 05, APIC ID 0, APIC INT 05
[    0.118276][    T0] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.119535][    T0] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 0, APIC INT 09
[    0.120763][    T0] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[    0.121930][    T0] Int: type 0, pol 1, trig 3, bus 00, IRQ 0a, APIC ID 0, APIC INT 0a
[    0.123216][    T0] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[    0.124407][    T0] Int: type 0, pol 1, trig 3, bus 00, IRQ 0b, APIC ID 0, APIC INT 0b
[    0.125621][    T0] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 0, APIC INT 01
[    0.127487][    T0] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 0, APIC INT 03
[    0.129532][    T0] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 0, APIC INT 04
[    0.131622][    T0] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 0, APIC INT 06
[    0.133635][    T0] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 0, APIC INT 07
[    0.135668][    T0] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 0, APIC INT 08
[    0.137740][    T0] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 0, APIC INT 0c
[    0.139760][    T0] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 0, APIC INT 0d
[    0.141807][    T0] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 0, APIC INT 0e
[    0.143727][    T0] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 0, APIC INT 0f
[    0.145529][    T0] ACPI: Using ACPI (MADT) for SMP configuration information
[    0.146931][    T0] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.148015][    T0] TSC deadline timer available
[    0.148871][    T0] CPU topo: Max. logical packages:   1
[    0.149863][    T0] CPU topo: Max. logical nodes:      1
[    0.150839][    T0] CPU topo: Num. nodes per package:  1
[    0.151747][    T0] CPU topo: Max. logical dies:       1
[    0.152615][    T0] CPU topo: Max. dies per package:   1
[    0.153477][    T0] CPU topo: Max. threads per core:   1
[    0.154450][    T0] CPU topo: Num. cores per package:     2
[    0.155427][    T0] CPU topo: Num. threads per package:   2
[    0.156337][    T0] CPU topo: Allowing 2 present CPUs plus 0 hotplug CPUs
[    0.157445][    T0] mapped IOAPIC to ffffb000 (fec00000)
[    0.158427][    T0] kvm-guest: APIC: eoi() replaced with kvm_guest_apic_eoi_write()
[    0.159786][    T0] [gap 0xc0000000-0xfeffbfff] available for PCI devices
[    0.160893][    T0] Booting paravirtualized kernel on KVM
[    0.161820][    T0] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[    0.163772][    T0] Zone ranges:
[    0.164312][    T0]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.165432][    T0]   Normal   [mem 0x0000000001000000-0x0000000046ffdfff]
[    0.166697][    T0]   HighMem  [mem 0x0000000046ffe000-0x00000000bffdffff]
[    0.167870][    T0] Movable zone start for each node
[    0.168680][    T0] Early memory node ranges
[    0.169373][    T0]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.170633][    T0]   node   0: [mem 0x0000000000100000-0x00000000bffdffff]
[    0.171851][    T0] Initmem setup node 0 [mem 0x0000000000001000-0x00000000bffdffff]
[    0.180604][    T0] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.181730][    T0] On node 0, zone DMA: 97 pages in unavailable ranges
[    0.195433][    T0] On node 0, zone HighMem: 32 pages in unavailable ranges
[    0.196496][    T0] setup_percpu: NR_CPUS:8 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
[    0.199245][    T0] percpu: Embedded 353 pages/cpu s1414260 r0 d31628 u1445888
[    0.200360][    T0] pcpu-alloc: s1414260 r0 d31628 u1445888 alloc=353*4096
[    0.201396][    T0] pcpu-alloc: [0] 0 [0] 1 
[    0.202146][    T0] Kernel command line: ip=::::vm-meta-239::dhcp root=/dev/ram0 RESULT_ROOT=/result/boot/1/vm-snb/debian-11.1-i386-20220923.cgz/i386-randconfig-013-20260604/gcc-14/2bbdcd7eabfcd3a5bd2614ab75ece19323d5f4c2/0 BOOT_IMAGE=/pkg/linux/i386-randconfig-013-20260604/gcc-14/2bbdcd7eabfcd3a5bd2614ab75ece19323d5f4c2/vmlinuz-7.1.0-rc6-00030-g2bbdcd7eabfc branch=viro-vfs/next.configfs job=/lkp/jobs/scheduled/vm-meta-239/boot-1-debian-11.1-i386-20220923.cgz-i386-randconfig-013-20260604-2bbdcd7eabfc-20260604-124340-1sqse2e-2.yaml user=lkp ARCH=i386 kconfig=i386-randconfig-013-20260604 commit=2bbdcd7eabfcd3a5bd2614ab75ece19323d5f4c2 mem=4G intremap=posted_msi watchdog_thresh=240 rcuperf.shutdown=0 rcuscale.shutdown=0 refscale.shutdown=0 audit=0 kunit.enable=0 ia32_emulation=on max_uptime=600 LKP_SERVER=internal-lkp-server selinux=0 debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 net.ifnames=0 printk.devkmsg=on panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 \
[    0.216707][    T0] Kernel command line: drbd.minor_count=8 systemd.log_level=err ignore_loglevel console=tty0 earlyprintk=ttyS0,115200 console=ttyS0,115200 vga=normal rw mem=4G earlycon=uart8250,io,0x3f8,115200n8 keep_bootcon
[    0.220468][    T0] sysrq: sysrq always enabled.
[    0.221535][    T0] Unknown kernel command line parameters "RESULT_ROOT=/result/boot/1/vm-snb/debian-11.1-i386-20220923.cgz/i386-randconfig-013-20260604/gcc-14/2bbdcd7eabfcd3a5bd2614ab75ece19323d5f4c2/0 branch=viro-vfs/next.configfs job=/lkp/jobs/scheduled/vm-meta-239/boot-1-debian-11.1-i386-20220923.cgz-i386-randconfig-013-20260604-2bbdcd7eabfc-20260604-124340-1sqse2e-2.yaml user=lkp ARCH=i386 kconfig=i386-randconfig-013-20260604 commit=2bbdcd7eabfcd3a5bd2614ab75ece19323d5f4c2 intremap=posted_msi audit=0 ia32_emulation=on max_uptime=600 LKP_SERVER=internal-lkp-server selinux=0 nmi_watchdog=panic load_ramdisk=2 prompt_ramdisk=0 vga=normal", will be passed to user space.
[    0.234366][    T0] printk: log buffer data + meta data: 1048576 + 3276800 = 4325376 bytes
[    0.237326][    T0] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
[    0.239599][    T0] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.241858][    T0] Built 1 zonelists, mobility grouping on.  Total pages: 786302
[    0.244827][    T0] allocated 3149692 bytes of page_ext
[    0.246119][    T0] mem auto-init: stack:all(pattern), heap alloc:on, heap free:on
[    0.247543][    T0] mem auto-init: clearing system memory may take some time...
[    1.509100][    T0] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    1.510965][    T0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Poking KASLR using RDTSC...
[    1.513248][    T0] Running RCU self tests
[    1.513923][    T0] Running RCU synchronous self tests
[    1.514786][    T0] rcu: Preemptible hierarchical RCU implementation.
[    1.515814][    T0] rcu: 	RCU event tracing is enabled.
[    1.516628][    T0] rcu: 	RCU lockdep checking is enabled.
[    1.517473][    T0] rcu: 	RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
[    1.518679][    T0] 	RCU CPU stall warnings timeout set to 100 (rcu_cpu_stall_timeout).
[    1.519954][    T0] 	Trampoline variant of Tasks RCU enabled.
[    1.520838][    T0] 	Rude variant of Tasks RCU enabled.
[    1.521646][    T0] 	Tracing variant of Tasks RCU enabled.
[    1.522608][    T0] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[    1.523942][    T0] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    1.525124][    T0] Running RCU synchronous self tests
[    1.526030][    T0] RCU Tasks: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=2.
[    1.528667][    T0] RCU Tasks Rude: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=2.
[    1.542875][    T0] NR_IRQS: 2304, nr_irqs: 56, preallocated irqs: 16
[    1.544493][    T0] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    1.546180][    T0] printk: legacy console [ttyS0] enabled
[    1.547793][    T0] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[    1.550223][    T0] ... MAX_LOCKDEP_SUBCLASSES:  8
[    1.551620][    T0] ... MAX_LOCK_DEPTH:          48
[    1.553028][    T0] ... MAX_LOCKDEP_KEYS:        8192
[    1.554489][    T0] ... CLASSHASH_SIZE:          4096
[    1.555841][    T0] ... MAX_LOCKDEP_ENTRIES:     32768
[    1.557145][    T0] ... MAX_LOCKDEP_CHAINS:      65536
[    1.558550][    T0] ... CHAINHASH_SIZE:          32768
[    1.559902][    T0]  memory used by lock dependency info: 4125 kB
[    1.561434][    T0]  memory used for stack traces: 2112 kB
[    1.562999][    T0]  per task-struct memory footprint: 2112 bytes
[    1.564556][    T0] ACPI: Core revision 20251212
[    1.566057][    T0] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
[    1.568885][    T0] APIC: Switch to symmetric I/O mode setup
[    1.570459][    T0] Masked ExtINT on CPU#0
[    1.572145][    T0] ENABLING IO-APIC IRQs
[    1.573229][    T0] Init IO_APIC IRQs
[    1.575015][    T0] apic 0 pin 0 not connected
[    1.576270][    T0] IOAPIC[0]: Preconfigured routing entry (0-1 -> IRQ 1 Level:0 ActiveLow:0)
[    1.578521][    T0] IOAPIC[0]: Preconfigured routing entry (0-2 -> IRQ 0 Level:0 ActiveLow:0)
[    1.580623][    T0] IOAPIC[0]: Preconfigured routing entry (0-3 -> IRQ 3 Level:0 ActiveLow:0)
[    1.582780][    T0] IOAPIC[0]: Preconfigured routing entry (0-4 -> IRQ 4 Level:0 ActiveLow:0)
[    1.584785][    T0] IOAPIC[0]: Preconfigured routing entry (0-5 -> IRQ 5 Level:1 ActiveLow:0)
[    1.587023][    T0] IOAPIC[0]: Preconfigured routing entry (0-6 -> IRQ 6 Level:0 ActiveLow:0)
[    1.589040][    T0] IOAPIC[0]: Preconfigured routing entry (0-7 -> IRQ 7 Level:0 ActiveLow:0)
[    1.591210][    T0] IOAPIC[0]: Preconfigured routing entry (0-8 -> IRQ 8 Level:0 ActiveLow:0)
[    1.593226][    T0] IOAPIC[0]: Preconfigured routing entry (0-9 -> IRQ 9 Level:1 ActiveLow:0)
[    1.595313][    T0] IOAPIC[0]: Preconfigured routing entry (0-10 -> IRQ 10 Level:1 ActiveLow:0)
[    1.597362][    T0] IOAPIC[0]: Preconfigured routing entry (0-11 -> IRQ 11 Level:1 ActiveLow:0)
[    1.599554][    T0] IOAPIC[0]: Preconfigured routing entry (0-12 -> IRQ 12 Level:0 ActiveLow:0)
[    1.601563][    T0] IOAPIC[0]: Preconfigured routing entry (0-13 -> IRQ 13 Level:0 ActiveLow:0)
[    1.603740][    T0] IOAPIC[0]: Preconfigured routing entry (0-14 -> IRQ 14 Level:0 ActiveLow:0)
[    1.605805][    T0] IOAPIC[0]: Preconfigured routing entry (0-15 -> IRQ 15 Level:0 ActiveLow:0)
[    1.607898][    T0] apic 0 pin 16 not connected
[    1.608989][    T0] apic 0 pin 17 not connected
[    1.610078][    T0] apic 0 pin 18 not connected
[    1.611198][    T0] apic 0 pin 19 not connected
[    1.612292][    T0] apic 0 pin 20 not connected
[    1.613336][    T0] apic 0 pin 21 not connected
[    1.614457][    T0] apic 0 pin 22 not connected
[    1.615592][    T0] apic 0 pin 23 not connected
[    1.616786][    T0] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    1.618479][    T0] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2113517beee, max_idle_ns: 440795246064 ns
[    1.621225][    T0] Calibrating delay loop (skipped) preset value.. 4591.43 BogoMIPS (lpj=7648700)
[    1.625447][    T0] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[    1.626825][    T0] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[    1.628812][    T0] mitigations: Enabled attack vectors: SMT mitigations: off
[    1.632154][    T0] Speculative Store Bypass: Vulnerable
[    1.634564][    T0] Spectre V2 : Vulnerable
[    1.636169][    T0] ITS: Vulnerable
[    1.637526][    T0] MDS: Vulnerable
[    1.638802][    T0] Spectre V1 : Vulnerable: __user pointer sanitization and usercopy barriers only; no swapgs barriers
[    1.642636][    T0] L1TF: Kernel not compiled for PAE. No mitigation for L1TF
[    1.646306][    T0] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    1.648686][    T0] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    1.651223][    T0] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    1.653246][    T0] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    1.655162][    T0] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    1.658715][    T0] pid_max: default: 32768 minimum: 301
[    1.660427][    T0] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[    1.662559][    T0] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[    1.664984][    T0] VFS: Finished mounting rootfs on nullfs
[    1.666968][    T0] Running RCU synchronous self tests
[    1.668879][    T0] Running RCU synchronous self tests
[    1.670464][    T1] smpboot: CPU0: Intel Xeon E312xx (Sandy Bridge) (family: 0x6, model: 0x2a, stepping: 0x1)
[    1.671385][    T1] Performance Events: unsupported CPU family 6 model 42 no PMU driver, software events only.
[    1.674143][    T1] signal: max sigframe size: 1760
[    1.675551][    T1] rcu: Hierarchical SRCU implementation.
[    1.676940][    T1] rcu: 	Max phase no-delay instances is 1000.
[    1.678746][    T1] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
[    1.681437][    T1] smp: Bringing up secondary CPUs ...
[    1.683289][    T1] smpboot: x86: Booting SMP configuration:
[    1.684587][    T1] .... node  #0, CPUs:      #1
[    0.071907][    T0] Masked ExtINT on CPU#1
[    1.689992][    T1] smp: Brought up 1 node, 2 CPUs
[    1.684587][    T1] .... node  #0, CPUs:      #1
[    0.071907][    T0] Masked ExtINT on CPU#1
[    1.689992][    T1] smp: Brought up 1 node, 2 CPUs
[    1.693619][    T1] smpboot: Total of 2 processors activated (9182.87 BogoMIPS)
[    1.695408][    T1] Memory: 2942748K/3145208K available (7912K kernel code, 4660K rwdata, 5424K rodata, 2296K init, 8312K bss, 199240K reserved, 0K cma-reserved, 1982344K highmem)
[    1.699703][    T1] devtmpfs: initialized
[    1.706346][    T1] Running RCU synchronous self tests
[    1.711067][    T1] Running RCU synchronous self tests
[    1.716574][    T1] Running RCU Tasks wait API self tests
[    1.718587][    T1] Running RCU Tasks Rude wait API self tests
[    1.723976][    T1] Running RCU Tasks Trace wait API self tests
[    1.730368][    T1] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    1.741716][    T1] posixtimers hash table entries: 1024 (order: 4, 49152 bytes, linear)
[    1.748673][    T1] futex hash table entries: 512 (32768 bytes on 1 NUMA nodes, total 32 KiB, linear).
[    1.753295][    T1] pinctrl core: initialized pinctrl subsystem
[    1.756951][    T9] Callback from call_rcu_tasks_trace() invoked.
[    1.757623][    T1] PM: RTC time: 09:12:42, date: 2026-06-04
[    1.760373][    T1] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    1.766228][    T1] Freeing SMP alternatives memory: 20K
[    1.768620][    T1] PCI: PCI BIOS revision 2.10 entry at 0xfd1d9, last bus=0
[    1.770608][    T1] PCI: Using configuration type 1 for base access
[    1.775884][    T1] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[    1.788333][    T1] ACPI: Added _OSI(Module Device)
[    1.789729][    T1] ACPI: Added _OSI(Processor Device)
[    1.791251][    T1] ACPI: Added _OSI(Processor Aggregator Device)
[    1.798843][    T1] ACPI: 1 ACPI AML tables successfully acquired and loaded
[    1.808077][    T1] ACPI: \_SB_: platform _OSC: OS support mask [00022c8c]
[    1.809876][    T1] ACPI: Interpreter enabled
[    1.811055][    T1] ACPI: PM: (supports S0 S3 S5)
[    1.812081][    T1] ACPI: Using IOAPIC for interrupt routing
[    1.813619][    T1] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    1.815380][    T1] PCI: Using E820 reservations for host bridge windows
[    1.817667][    T1] ACPI: Enabled 2 GPEs in block 00 to 0F
[    1.844540][    T1] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    1.849059][    T1] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments HPX-Type3]
[    1.851225][    T1] acpi PNP0A03:00: PCIe port services disabled; not requesting _OSC control
[    1.853499][    T1] acpi PNP0A03:00: _OSC: platform retains control of PCIe features (AE_ERROR)
[    1.855333][    T1] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended configuration space under this bridge
[    1.857913][    T1] acpi resource window ([0x840000000-0x8bfffffff] ignored, not CPU addressable)
[    1.861449][    T1] PCI host bridge to bus 0000:00
[    1.862721][    T1] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    1.864561][    T1] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    1.866499][    T1] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    1.867893][    T1] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]
[    1.869975][    T1] pci_bus 0000:00: root bus resource [bus 00-ff]
[    1.871359][    T1] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000 conventional PCI endpoint
[    1.874861][    T1] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100 conventional PCI endpoint
[    1.878309][    T1] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180 conventional PCI endpoint
[    1.881251][    T1] pci 0000:00:01.1: BAR 4 [io  0xc140-0xc14f]
[    1.882800][    T1] pci 0000:00:01.1: BAR 0 [io  0x01f0-0x01f7]: legacy IDE quirk
[    1.884558][    T1] pci 0000:00:01.1: BAR 1 [io  0x03f6]: legacy IDE quirk
[    1.886290][    T1] pci 0000:00:01.1: BAR 2 [io  0x0170-0x0177]: legacy IDE quirk
[    1.891224][    T1] pci 0000:00:01.1: BAR 3 [io  0x0376]: legacy IDE quirk
[    1.893804][    T1] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000 conventional PCI endpoint
[    1.896315][    T1] pci 0000:00:01.3: quirk: [io  0x0600-0x063f] claimed by PIIX4 ACPI
[    1.897899][    T1] pci 0000:00:01.3: quirk: [io  0x0700-0x070f] claimed by PIIX4 SMB
[    1.900720][    T1] pci 0000:00:02.0: [1234:1111] type 00 class 0x030000 conventional PCI endpoint
[    1.904097][    T1] pci 0000:00:02.0: BAR 0 [mem 0xfd000000-0xfdffffff pref]
[    1.905775][    T1] pci 0000:00:02.0: BAR 2 [mem 0xfebf0000-0xfebf0fff]
[    1.907434][    T1] pci 0000:00:02.0: ROM [mem 0xfebe0000-0xfebeffff pref]
[    1.909199][    T1] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    1.912295][    T1] pci 0000:00:03.0: [8086:100e] type 00 class 0x020000 conventional PCI endpoint
[    1.917697][    T1] pci 0000:00:03.0: BAR 0 [mem 0xfebc0000-0xfebdffff]
[    1.919705][    T1] pci 0000:00:03.0: BAR 1 [io  0xc100-0xc13f]
[    1.923413][    T1] pci 0000:00:03.0: ROM [mem 0xfeb80000-0xfebbffff pref]
[    1.937188][    T1] pci 0000:00:04.0: [8086:25ab] type 00 class 0x088000 conventional PCI endpoint
[    1.944199][    T1] pci 0000:00:04.0: BAR 0 [mem 0xfebf1000-0xfebf100f]
[    1.949353][    T1] pci 0000:00:05.0: [1b36:0005] type 00 class 0x00ff00 conventional PCI endpoint
[    1.952177][    T1] pci 0000:00:05.0: BAR 0 [mem 0xfebf2000-0xfebf2fff]
[    1.953925][    T1] pci 0000:00:05.0: BAR 1 [io  0xc000-0xc0ff]
[    1.958765][    T1] pci_bus 0000:00: on NUMA node 0
[    1.962492][    T1] ACPI: PCI: Interrupt link LNKA configured for IRQ 10
[    1.964767][    T1] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
[    1.966663][    T1] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
[    1.968764][    T1] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
[    1.970494][    T1] ACPI: PCI: Interrupt link LNKS configured for IRQ 9
[    1.975333][    T1] pps_core: LinuxPPS API ver. 1 registered
[    1.976775][    T1] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.978883][    T1] PTP clock support registered
[    1.980106][    T1] EDAC MC: Ver: 3.0.0
[    1.983225][    T1] PCI: Using ACPI for IRQ routing
[    1.984946][    T1] PCI: pci_cache_line_size set to 64 bytes
[    1.986669][    T1] e820: register RAM buffer resource [mem 0x0009fc00-0x0009ffff]
[    1.988481][    T1] e820: register RAM buffer resource [mem 0xbffe0000-0xbfffffff]
[    1.992512][    T1] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    1.993359][    T1] pci 0000:00:02.0: vgaarb: bridge control possible
[    1.994551][    T1] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    1.997899][    T1] vgaarb: loaded
[    1.999940][    T1] clocksource: Switched to clocksource kvm-clock
[    2.001218][    T1] VFS: Disk quotas dquot_6.6.0
[    2.001477][    T1] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    2.003973][    T1] pnp: PnP ACPI init
[    2.005733][    T1] pnp 00:02: [dma 2]
[    2.008635][    T1] pnp: PnP ACPI: found 6 devices
[    2.010597][    T1] PnPBIOS: Disabled
[    2.038848][   T27] Callback from call_rcu_tasks() invoked.
[    2.055081][    T1] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    2.058053][    T1] NET: Registered PF_INET protocol family
[    2.059617][    T1] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    2.062348][    T1] tcp_listen_portaddr_hash hash table entries: 512 (order: 3, 24576 bytes, linear)
[    2.064719][    T1] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    2.066829][    T1] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
[    2.069157][    T1] TCP bind hash table entries: 8192 (order: 8, 786432 bytes, linear)
[    2.071325][    T1] TCP: Hash tables configured (established 8192 bind 8192)
[    2.073235][    T1] UDP hash table entries: 512 (order: 5, 90112 bytes, linear)
[    2.075072][    T1] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    2.077527][    T1] RPC: Registered named UNIX socket transport module.
[    2.079263][    T1] RPC: Registered udp transport module.
[    2.080662][    T1] RPC: Registered tcp transport module.
[    2.081998][    T1] RPC: Registered tcp-with-tls transport module.
[    2.083448][    T1] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    2.085355][    T1] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    2.087058][    T1] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    2.088806][    T1] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    2.090618][    T1] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfebfffff window]
[    2.092734][    T1] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[    2.094319][    T1] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[    2.095924][    T1] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[    2.097682][    T1] PCI: CLS 0 bytes, default 64
[    2.099368][    T1] RAPL PMU: API unit is 2^-32 Joules, 0 fixed counters, 10737418240 ms ovfl timer
[    2.099665][   T11] Unpacking initramfs...
[    2.100185][    T1] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2113517beee, max_idle_ns: 440795246064 ns
[    2.099368][    T1] RAPL PMU: API unit is 2^-32 Joules, 0 fixed counters, 10737418240 ms ovfl timer
[    2.099665][   T11] Unpacking initramfs...
[    2.100185][    T1] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2113517beee, max_idle_ns: 440795246064 ns
[    2.106421][    T1] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[    2.108457][    T1] apm: disabled - APM is not SMP safe.
[    2.114601][    T1] Initialise system trusted keyrings
[    2.116880][    T1] Key type blacklist registered
[    2.120276][    T1] workingset: timestamp_bits=30 (anon: 26) max_order=20 bucket_order=0 (anon: 0)
[    2.127301][    T1] 9p: Installing v9fs 9p2000 file system support
[    2.131211][    T1] Key type asymmetric registered
[    2.133575][    T1] Asymmetric key parser 'x509' registered
[    2.141569][    T1] gpio_it87: no device
[    2.144053][    T1] no IO addresses supplied
[    2.147026][    T1] input: Power Button as /devices/platform/LNXPWRBN:00/input/input0
[    2.150703][    T1] ACPI: button: Power Button [PWRF]
[    2.153306][    T1] isapnp: Scanning for PnP cards...
[    2.518947][    T1] isapnp: No Plug & Play device found
[    2.603564][    T1] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    2.606429][    T1] 00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    2.610802][    T1] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    2.623234][    T1] dummy-irq: no IRQ given.  Use irq=N
[    2.625800][    T1] Silicon Labs C2 port support v. 0.51.0 - (C) 2007 Rodolfo Giometti
[    2.630385][    T1] e1000: Intel(R) PRO/1000 Network Driver
[    2.632102][    T1] e1000: Copyright (c) 1999-2006 Intel Corporation.
[    2.639145][    T1] ACPI: \_SB_.LNKC: Enabled at IRQ 11
[    2.964274][    T1] e1000 0000:00:03.0 eth0: (PCI:33MHz:32-bit) 52:54:00:12:34:56
[    2.967001][    T1] e1000 0000:00:03.0 eth0: Intel(R) PRO/1000 Network Connection
[    2.970577][    T1] UDC core: zero: couldn't find an available UDC
[    2.973173][    T1] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[    2.976580][    T1] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.978650][    T1] serio: i8042 AUX port at 0x60,0x64 irq 12
[    2.981505][   T29] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[    3.395762][   T29] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input3
[    6.445654][   T11] Freeing initrd memory: 138092K
[    6.448548][    T1] isa i2c-pca-isa.0: Please specify I/O base
[    6.458764][    T1] surface_gpe: no compatible Microsoft Surface device found, exiting
[    6.464570][    T1] BUG: kernel NULL pointer dereference, address: 00000020
[    6.465555][    T1] #PF: supervisor write access in kernel mode
[    6.465555][    T1] #PF: error_code(0x0002) - not-present page
[    6.465555][    T1] *pde = 00000000 
[    6.465555][    T1] Oops: Oops: 0002 [#1] SMP
[    6.465555][    T1] CPU: 1 UID: 0 PID: 1 Comm: swapper/0 Tainted: G                T   7.1.0-rc6-00030-g2bbdcd7eabfc #1 PREEMPT 
[    6.465555][    T1] Tainted: [T]=RANDSTRUCT
[    6.465555][    T1] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
[    6.465555][    T1] EIP: configfs_register_group+0x79/0xc4
[    6.465555][    T1] Code: 89 13 e8 ca 76 fb ff 89 c1 3d 00 f0 ff ff 77 2e 57 31 d2 89 45 ec 89 d8 e8 c8 fe ff ff 8b 4d ec 89 c6 58 85 f6 75 0a 8b 41 74 <81> 48 20 80 00 00 00 89 c8 e8 e1 76 fb ff 85 f6 75 04 eb 1b 89 c6
[    6.465555][    T1] EAX: 00000000 EBX: b1832180 ECX: b3afc7d0 EDX: 00000000
[    6.465555][    T1] ESI: 00000000 EDI: b183a180 EBP: b1149ec0 ESP: b1149eac
[    6.465555][    T1] DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 EFLAGS: 00010246
[    6.465555][    T1] CR0: 80050033 CR2: 00000020 CR3: 1720f000 CR4: 000406d0
[    6.465555][    T1] Call Trace:
[    6.465555][    T1]  configfs_register_default_group+0x40/0x5c
[    6.465555][    T1]  iio_sw_device_init+0x20/0x5c
[    6.465555][    T1]  do_one_initcall+0xb2/0x234
[    6.465555][    T1]  ? iio_configfs_init+0x3c/0x3c
[    6.465555][    T1]  do_initcalls+0x16b/0x198
[    6.465555][    T1]  kernel_init_freeable+0x204/0x288
[    6.465555][    T1]  ? rest_init+0x150/0x150
[    6.465555][    T1]  kernel_init+0x12/0xf4
[    6.465555][    T1]  ret_from_fork+0x1a/0x1e4
[    6.465555][    T1]  ? rest_init+0x150/0x150
[    6.465555][    T1]  ret_from_fork_asm+0x12/0x18
[    6.465555][    T1]  entry_INT80_32+0x125/0x125
[    6.465555][    T1] Modules linked in:
[    6.465555][    T1] CR2: 0000000000000020
[    6.465555][    T1] ---[ end trace 0000000000000000 ]---
[    6.465555][    T1] EIP: configfs_register_group+0x79/0xc4
[    6.465555][    T1] Code: 89 13 e8 ca 76 fb ff 89 c1 3d 00 f0 ff ff 77 2e 57 31 d2 89 45 ec 89 d8 e8 c8 fe ff ff 8b 4d ec 89 c6 58 85 f6 75 0a 8b 41 74 <81> 48 20 80 00 00 00 89 c8 e8 e1 76 fb ff 85 f6 75 04 eb 1b 89 c6
[    6.465555][    T1] EAX: 00000000 EBX: b1832180 ECX: b3afc7d0 EDX: 00000000
[    6.465555][    T1] ESI: 00000000 EDI: b183a180 EBP: b1149ec0 ESP: b1149eac
[    6.465555][    T1] DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 EFLAGS: 00010246
[    6.465555][    T1] CR0: 80050033 CR2: 00000020 CR3: 1720f000 CR4: 000406d0
[    6.465555][    T1] Kernel panic - not syncing: Fatal exception
[    6.465555][    T1] Kernel Offset: disabled

Kboot worker: lkp-worker62
Elapsed time: 60

kvm=(
	qemu-system-x86_64
	-enable-kvm
	-cpu SandyBridge
	-kernel $kernel
	-initrd initrd-vm-meta-239.cgz
	-m 32768
	-smp 2
	-device e1000,netdev=net0
	-netdev user,id=net0,hostfwd=tcp::32032-:22
	-boot order=nc
	-no-reboot
	-device i6300esb
	-device pci-testdev
	-watchdog-action debug
	-rtc base=localtime
	-serial stdio
	-display none
	-monitor null
)

append=(
	ip=::::vm-meta-239::dhcp
	root=/dev/ram0
	RESULT_ROOT=/result/boot/1/vm-snb/debian-11.1-i386-20220923.cgz/i386-randconfig-013-20260604/gcc-14/2bbdcd7eabfcd3a5bd2614ab75ece19323d5f4c2/0
	BOOT_IMAGE=/pkg/linux/i386-randconfig-013-20260604/gcc-14/2bbdcd7eabfcd3a5bd2614ab75ece19323d5f4c2/vmlinuz-7.1.0-rc6-00030-g2bbdcd7eabfc
	branch=viro-vfs/next.configfs
	job=/job-script
	user=lkp
	ARCH=i386
	kconfig=i386-randconfig-013-20260604
	commit=2bbdcd7eabfcd3a5bd2614ab75ece19323d5f4c2
	mem=4G
	intremap=posted_msi
	watchdog_thresh=240
	rcuperf.shutdown=0
	rcuscale.shutdown=0
	refscale.shutdown=0
	audit=0
	kunit.enable=0
	ia32_emulation=on
	max_uptime=600
	result_service=tmpfs
	selinux=0
	debug
	apic=debug
	sysrq_always_enabled
	rcupdate.rcu_cpu_stall_timeout=100
	net.ifnames=0
	printk.devkmsg=on
	panic=-1
	softlockup_panic=1
	nmi_watchdog=panic
	oops=panic
	load_ramdisk=2
	prompt_ramdisk=0
	drbd.minor_count=8
	systemd.log_level=err
	ignore_loglevel
	console=tty0
	earlyprintk=ttyS0,115200
	console=ttyS0,115200
	vga=normal
	rw
	mem=4G
	earlycon=uart8250,io,0x3f8,115200n8
	keep_bootcon
)

"${kvm[@]}" -append "${append[*]}"
