2026-09-29 15:48:57 cd /lkp/benchmarks/hwsim/tests/hwsim group: group-14, test: group-14 2026-09-29 15:48:57 ./build.sh Building TNC testing tools Building wlantest Building hs20-osu-client Building hostapd Building wpa_supplicant 2026-09-29 15:49:49 systemctl status dbus.service ○ dbus.service - D-Bus System Message Bus Loaded: loaded (/usr/lib/systemd/system/dbus.service; static) Active: inactive (dead) TriggeredBy: ○ dbus.socket Docs: man:dbus-daemon(1) 2026-09-29 15:49:49 systemctl restart dbus.service srw-rw-rw- 1 root root 0 Sep 29 15:49 /run/dbus/system_bus_socket 2026-09-29 15:49:59 ./start.sh 2026-09-29 15:50:00 ./run-tests.py afc_chan_320mhz_1 DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START afc_chan_320mhz_1 1/1 Test: AFC availableChannelInfo with 320 MHz-1 channel width usable hostapd failed to connect to afcd Country code at the end: 00 Skip test case: 6 GHz frequency is not supported SKIP afc_chan_320mhz_1 2.002995 2026-09-29 15:50:03.924875 passed all 0 test case(s) skipped 1 test case(s) 2026-09-29 15:50:03 ./run-tests.py ap_acs DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START ap_acs 1/1 Test: Automatic channel selection Starting AP wlan3 Removing BSS wlan3 Starting AP wlan3 Connect STA wlan0 to AP PASS ap_acs 6.889318 2026-09-29 15:50:11.120959 passed all 1 test case(s) 2026-09-29 15:50:11 ./run-tests.py ap_acs_40mhz_plus_or_minus DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START ap_acs_40mhz_plus_or_minus 1/1 Test: Automatic channel selection for 40 MHz channel (plus or minus) Starting AP wlan3 Removing BSS wlan3 Starting AP wlan3 Connect STA wlan0 to AP PASS ap_acs_40mhz_plus_or_minus 8.29288 2026-09-29 15:50:19.722064 passed all 1 test case(s) 2026-09-29 15:50:19 ./run-tests.py ap_bss_add_many DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START ap_bss_add_many 1/1 Test: Large number of BSS add operations with hostapd Starting BSS phy=phy3 ifname=wlan3 Starting BSS phy=phy3 ifname=wlan3-0 Starting BSS phy=phy3 ifname=wlan3-1 Starting BSS phy=phy3 ifname=wlan3-2 Starting BSS phy=phy3 ifname=wlan3-3 Starting BSS phy=phy3 ifname=wlan3-4 Starting BSS phy=phy3 ifname=wlan3-5 Starting BSS phy=phy3 ifname=wlan3-6 Starting BSS phy=phy3 ifname=wlan3-7 Starting BSS phy=phy3 ifname=wlan3-8 Starting BSS phy=phy3 ifname=wlan3-9 Starting BSS phy=phy3 ifname=wlan3-10 Starting BSS phy=phy3 ifname=wlan3-11 Starting BSS phy=phy3 ifname=wlan3-12 Starting BSS phy=phy3 ifname=wlan3-13 Starting BSS phy=phy3 ifname=wlan3-14 Starting BSS phy=phy3 ifname=wlan3-15 Connect STA wlan0 to AP Connect STA wlan0 to AP Removing BSS wlan3-0 Connect STA wlan0 to AP Removing BSS wlan3-1 Connect STA wlan0 to AP Removing BSS wlan3-2 Connect STA wlan0 to AP Removing BSS wlan3-3 Connect STA wlan0 to AP Removing BSS wlan3-4 Connect STA wlan0 to AP Removing BSS wlan3-5 Connect STA wlan0 to AP Removing BSS wlan3-6 Connect STA wlan0 to AP Removing BSS wlan3-7 Connect STA wlan0 to AP Removing BSS wlan3-8 Connect STA wlan0 to AP Removing BSS wlan3-9 Connect STA wlan0 to AP Removing BSS wlan3-10 Connect STA wlan0 to AP Removing BSS wlan3-11 Connect STA wlan0 to AP Removing BSS wlan3-12 Connect STA wlan0 to AP Removing BSS wlan3-13 Connect STA wlan0 to AP Removing BSS wlan3-14 Connect STA wlan0 to AP Removing BSS wlan3-15 PASS ap_bss_add_many 5.473749 2026-09-29 15:50:25.500014 passed all 1 test case(s) 2026-09-29 15:50:25 ./run-tests.py ap_config_set_errors DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START ap_config_set_errors 1/1 Test: hostapd configuration parsing errors Starting AP wlan3 hs20_conn_capab limit at 16380 PASS ap_config_set_errors 1.561516 2026-09-29 15:50:27.361230 passed all 1 test case(s) 2026-09-29 15:50:27 ./run-tests.py ap_csa_1_switch_count_0 DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START ap_csa_1_switch_count_0 1/1 Test: AP Channel Switch, one switch with count 0 Starting AP wlan3 Connect STA wlan0 to AP PASS ap_csa_1_switch_count_0 0.468639 2026-09-29 15:50:28.134390 passed all 1 test case(s) 2026-09-29 15:50:28 ./run-tests.py ap_csa_invalid DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START ap_csa_invalid 1/1 Test: AP Channel Switch - invalid channel Starting AP wlan3 Connect STA wlan0 to AP PASS ap_csa_invalid 0.289935 2026-09-29 15:50:28.727243 passed all 1 test case(s) 2026-09-29 15:50:28 ./run-tests.py ap_ft_ap_oom7b DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START ap_ft_ap_oom7b 1/1 Test: WPA2-PSK-FT and AP OOM 7b Starting AP wlan3 Connect STA wlan0 to AP Starting AP wlan4 PASS ap_ft_ap_oom7b 1.341589 2026-09-29 15:50:30.379043 passed all 1 test case(s) 2026-09-29 15:50:30 ./run-tests.py ap_ft_many_vlan DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START ap_ft_many_vlan 1/1 Test: WPA2-PSK-FT AP with VLAN multiple times Starting AP wlan3 Starting AP wlan4 Connect to first AP Connect STA wlan0 to AP Roam to the second AP Roam back to the first AP Roam to the second AP Roam back to the first AP Roam to the second AP Roam back to the first AP Roam to the second AP Roam back to the first AP Roam to the second AP Roam back to the first AP Roam to the second AP Roam back to the first AP Roam to the second AP Roam back to the first AP Roam to the second AP Roam back to the first AP Roam to the second AP Roam back to the first AP Roam to the second AP Roam back to the first AP Roam to the second AP Roam back to the first AP Roam to the second AP Roam back to the first AP Roam to the second AP Roam back to the first AP Roam to the second AP Roam back to the first AP Roam to the second AP Roam back to the first AP Roam to the second AP Roam back to the first AP Roam to the second AP Roam back to the first AP Roam to the second AP Roam back to the first AP Roam to the second AP Roam back to the first AP Roam to the second AP Roam back to the first AP Roam to the second AP Roam back to the first AP Roam to the second AP Roam back to the first AP Roam to the second AP Roam back to the first AP Roam to the second AP Roam back to the first AP Roam to the second AP Roam back to the first AP Roam to the second AP Roam back to the first AP Roam to the second AP Roam back to the first AP Roam to the second AP Roam back to the first AP Roam to the second AP Roam back to the first AP Roam to the second AP Roam back to the first AP Roam to the second AP Roam back to the first AP Roam to the second AP Roam back to the first AP Roam to the second AP Roam back to the first AP Roam to the second AP Roam back to the first AP Roam to the second AP Roam back to the first AP Roam to the second AP Roam back to the first AP Roam to the second AP Roam back to the first AP Roam to the second AP Roam back to the first AP Roam to the second AP Roam back to the first AP Roam to the second AP Roam back to the first AP Roam to the second AP Roam back to the first AP Roam to the second AP Roam back to the first AP Roam to the second AP Roam back to the first AP Roam to the second AP Roam back to the first AP Roam to the second AP Roam back to the first AP Roam to the second AP Roam back to the first AP Roam to the second AP Roam back to the first AP Roam to the second AP Roam back to the first AP Roam to the second AP Roam back to the first AP Roam to the second AP Roam back to the first AP PASS ap_ft_many_vlan 24.337119 2026-09-29 15:50:55.017079 passed all 1 test case(s) 2026-09-29 15:50:55 ./run-tests.py ap_ft_pmf_bip_gmac_256 DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START ap_ft_pmf_bip_gmac_256 1/1 Test: WPA2-PSK-FT AP with PMF/BIP-GMAC-256 Starting AP wlan3 Starting AP wlan4 Connect to first AP Connect STA wlan0 to AP Roam to the second AP Roam back to the first AP PASS ap_ft_pmf_bip_gmac_256 3.704044 2026-09-29 15:50:59.026890 passed all 1 test case(s) 2026-09-29 15:50:59 ./run-tests.py ap_ft_sae_ext_key_19_over_ds DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START ap_ft_sae_ext_key_19_over_ds 1/1 Test: WPA2-FT-SAE-EXT-KEY AP over DS (group 19) Starting AP wlan3 Starting AP wlan4 Connect to first AP Connect STA wlan0 to AP Roam to the second AP Roam back to the first AP PASS ap_ft_sae_ext_key_19_over_ds 1.632255 2026-09-29 15:51:00.964623 passed all 1 test case(s) 2026-09-29 15:51:01 ./run-tests.py ap_hs20_anqp_invalid_gas_response DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START ap_hs20_anqp_invalid_gas_response 1/1 Test: Hotspot 2.0 network selection and invalid GAS response Starting AP wlan3 ANQP: Unexpected Advertisement Protocol in response ANQP: Invalid element length for Info ID 1234 PASS ap_hs20_anqp_invalid_gas_response 1.278247 2026-09-29 15:51:02.547128 passed all 1 test case(s) 2026-09-29 15:51:02 ./run-tests.py ap_hs20_auto_interworking_no_match DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START ap_hs20_auto_interworking_no_match 1/1 Test: Hotspot 2.0 connection with auto_interworking=1 and no matching network Starting AP wlan3 Connect STA wlan0 to AP start ping ping done start ping ping done start ping ping done start ping ping done start ping ping done PASS ap_hs20_auto_interworking_no_match 0.705927 2026-09-29 15:51:03.558585 passed all 1 test case(s) 2026-09-29 15:51:03 ./run-tests.py ap_hs20_connect_no_full_match DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START ap_hs20_connect_no_full_match 1/1 Test: Hotspot 2.0 connection and no full match Starting AP wlan3 PASS ap_hs20_connect_no_full_match 9.962788 2026-09-29 15:51:13.823693 passed all 1 test case(s) 2026-09-29 15:51:13 ./run-tests.py ap_hs20_interworking_select_blocking_scan DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START ap_hs20_interworking_select_blocking_scan 1/1 Test: Ongoing INTERWORKING_SELECT blocking SCAN Starting AP wlan3 PASS ap_hs20_interworking_select_blocking_scan 0.49205 2026-09-29 15:51:14.622168 passed all 1 test case(s) 2026-09-29 15:51:14 ./run-tests.py ap_hs20_network_preference3 DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START ap_hs20_network_preference3 1/1 Test: Hotspot 2.0 network selection with two credential (one preferred) Starting AP wlan3 Starting AP wlan4 PASS ap_hs20_network_preference3 1.145975 2026-09-29 15:51:16.075018 passed all 1 test case(s) 2026-09-29 15:51:16 ./run-tests.py ap_hs20_proxyarp DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START ap_hs20_proxyarp 1/1 Test: Hotspot 2.0 and ProxyARP Starting AP wlan3 Connect STA wlan1 to AP After connect: ['aaaa:bbbb:cccc::2 dev ap-br0 lladdr 02:00:00:00:00:00 PERMANENT', 'aaaa:bbbb:eeee::2 dev ap-br0 lladdr 02:00:00:00:01:00 PERMANENT', 'aaaa:bbbb:dddd::2 dev ap-br0 lladdr 02:00:00:00:01:00 PERMANENT'] After disconnect: [] PASS ap_hs20_proxyarp 1.924069 2026-09-29 15:51:18.302481 passed all 1 test case(s) 2026-09-29 15:51:18 ./run-tests.py ap_hs20_random_mac_addr DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START ap_hs20_random_mac_addr 1/1 Test: Hotspot 2.0 connection with random MAC address Starting AP wlan3 PASS ap_hs20_random_mac_addr 1.316181 2026-09-29 15:51:19.920555 passed all 1 test case(s) 2026-09-29 15:51:19 ./run-tests.py ap_multi_bss_acs DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START ap_multi_bss_acs 1/1 Test: hostapd start with a multi-BSS configuration file using ACS Starting AP wlan3 Removing BSS wlan3 Starting interface wlan3 Connect STA wlan0 to AP Connect STA wlan1 to AP Connect STA wlan2 to AP PASS ap_multi_bss_acs 7.714799 2026-09-29 15:51:27.962462 passed all 1 test case(s) 2026-09-29 15:51:28 ./run-tests.py ap_open_select_network DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START ap_open_select_network 1/1 Test: Open mode connection and SELECT_NETWORK to change network Starting AP wlan3 Starting AP wlan4 Connect STA wlan0 to AP Connect STA wlan0 to AP PASS ap_open_select_network 0.868597 2026-09-29 15:51:29.141087 passed all 1 test case(s) 2026-09-29 15:51:29 ./run-tests.py ap_open_tdls_vht160 DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START ap_open_tdls_vht160 1/1 Test: Open AP and two stations using TDLS with VHT 160 Starting AP wlan3 Exception during test execution: a bytes-like object is required, not 'str' Traceback (most recent call last): File "/lkp/benchmarks/hwsim/tests/hwsim/./run-tests.py", line 635, in main t(dev, apdev) ~^^^^^^^^^^^^ File "/lkp/benchmarks/hwsim/tests/hwsim/test_ap_tdls.py", line 521, in test_ap_open_tdls_vht160 if "5490" in r and "DFS" in r: ^^^^^^^^^^^ TypeError: a bytes-like object is required, not 'str' FAIL ap_open_tdls_vht160 4.050176 2026-09-29 15:51:33.489014 passed 0 test case(s) skipped 0 test case(s) failed tests: ap_open_tdls_vht160 2026-09-29 15:51:33 ./run-tests.py ap_pmf_inject_assoc DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START ap_pmf_inject_assoc 1/1 Test: WPA2-PSK with PMF and Association Request frame injection Starting AP wlan3 Connect STA wlan0 to AP PASS ap_pmf_inject_assoc 6.024328 2026-09-29 15:51:39.810808 passed all 1 test case(s) 2026-09-29 15:51:39 ./run-tests.py ap_pmf_sta_sa_query_local_failure DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START ap_pmf_sta_sa_query_local_failure 1/1 Test: WPA2-PSK AP with station using SA Query (local failure) Connect STA wlan0 to AP PASS ap_pmf_sta_sa_query_local_failure 0.728615 2026-09-29 15:51:40.835603 passed all 1 test case(s) 2026-09-29 15:51:40 ./run-tests.py ap_roam_signal_level_override DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START ap_roam_signal_level_override 1/1 Test: Roam between two APs based on driver signal level override Starting AP wlan3 Starting AP wlan4 Connect STA wlan0 to AP PASS ap_roam_signal_level_override 1.681152 2026-09-29 15:51:42.830911 passed all 1 test case(s) 2026-09-29 15:51:42 ./run-tests.py ap_tdls_discovery DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START ap_tdls_discovery 1/1 Test: WPA2-PSK AP and two stations using TDLS discovery Starting AP wlan3 Connect STA wlan0 to AP Connect STA wlan1 to AP PASS ap_tdls_discovery 1.263783 2026-09-29 15:51:44.397628 passed all 1 test case(s) 2026-09-29 15:51:44 ./run-tests.py ap_vht80_to_24g_ht DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START ap_vht80_to_24g_ht 1/1 Test: VHT with 80 MHz channel width reconfigured to 2.4 GHz HT Starting AP wlan3 Country code at the end: 00 Exception during test execution: AP startup failed Traceback (most recent call last): File "/lkp/benchmarks/hwsim/tests/hwsim/./run-tests.py", line 635, in main t(dev, apdev) ~^^^^^^^^^^^^ File "/lkp/benchmarks/hwsim/tests/hwsim/test_ap_vht.py", line 1274, in test_ap_vht80_to_24g_ht hapd = hostapd.add_ap(apdev[0], params) File "/lkp/benchmarks/hwsim/tests/hwsim/hostapd.py", line 719, in add_ap raise Exception("AP startup failed") Exception: AP startup failed FAIL ap_vht80_to_24g_ht 5.94713 2026-09-29 15:51:50.641513 passed 0 test case(s) skipped 0 test case(s) failed tests: ap_vht80_to_24g_ht 2026-09-29 15:51:50 ./run-tests.py ap_vht_wifi_generation DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START ap_vht_wifi_generation 1/1 Test: VHT and wifi_generation Starting AP wlan3 Country code at the end: 00 Exception during test execution: AP startup failed Traceback (most recent call last): File "/lkp/benchmarks/hwsim/tests/hwsim/./run-tests.py", line 635, in main t(dev, apdev) ~^^^^^^^^^^^^ File "/lkp/benchmarks/hwsim/tests/hwsim/test_ap_vht.py", line 98, in test_ap_vht_wifi_generation hapd = hostapd.add_ap(apdev[0], params) File "/lkp/benchmarks/hwsim/tests/hwsim/hostapd.py", line 719, in add_ap raise Exception("AP startup failed") Exception: AP startup failed FAIL ap_vht_wifi_generation 6.096193 2026-09-29 15:51:57.040843 passed 0 test case(s) skipped 0 test case(s) failed tests: ap_vht_wifi_generation 2026-09-29 15:51:57 ./run-tests.py ap_wds_sta_open DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START ap_wds_sta_open 1/1 Test: Open AP with STA using 4addr mode Starting AP wlan3 Connect STA wlan0 to AP Exception during test execution: sending data without carrier won't work Traceback (most recent call last): File "/lkp/benchmarks/hwsim/tests/hwsim/./run-tests.py", line 635, in main t(dev, apdev) ~^^^^^^^^^^^^ File "/lkp/benchmarks/hwsim/tests/hwsim/test_ap_params.py", line 389, in test_ap_wds_sta_open hwsim_utils.test_connectivity_iface(dev[0], hapd, "wds-br0", ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^^^^^^ max_tries=15) ^^^^^^^^^^^^^ File "/lkp/benchmarks/hwsim/tests/hwsim/hwsim_utils.py", line 223, in test_connectivity_iface test_connectivity(dev1, dev2, dscp, tos, ifname2=ifname, ~~~~~~~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ max_tries=max_tries, timeout=timeout) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/lkp/benchmarks/hwsim/tests/hwsim/hwsim_utils.py", line 217, in test_connectivity raise Exception(last_err) Exception: sending data without carrier won't work FAIL ap_wds_sta_open 14.718961 2026-09-29 15:52:12.064446 passed 0 test case(s) skipped 0 test case(s) failed tests: ap_wds_sta_open 2026-09-29 15:52:12 ./run-tests.py ap_wpa2_delayed_m1_m3_retransmission2 DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START ap_wpa2_delayed_m1_m3_retransmission2 1/1 Test: Delayed M1+M3 retransmission (change M1 ANonce) Skip test case: Not running under VM SKIP ap_wpa2_delayed_m1_m3_retransmission2 0.053144 2026-09-29 15:52:12.422343 passed all 0 test case(s) skipped 1 test case(s) 2026-09-29 15:52:12 ./run-tests.py ap_wpa2_eap_aka_prime_imsi_identity DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START ap_wpa2_eap_aka_prime_imsi_identity 1/1 Test: WPA2-Enterprise connection using EAP-AKA' and imsi_identity Starting AP wlan3 Connect STA wlan0 to AP PASS ap_wpa2_eap_aka_prime_imsi_identity 0.474839 2026-09-29 15:52:13.201895 passed all 1 test case(s) 2026-09-29 15:52:13 ./run-tests.py ap_wpa2_eap_assoc_rsn DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START ap_wpa2_eap_assoc_rsn 1/1 Test: WPA2-Enterprise AP and association request RSN IE differences Starting AP wlan3 Starting AP wlan4 Normal wpa_supplicant assoc req RSN IE Connect STA wlan0 to AP Extra PMKIDCount field in RSN IE Connect STA wlan0 to AP Extra Group Management Cipher Suite in RSN IE Connect STA wlan0 to AP Extra undefined extension field in RSN IE Connect STA wlan0 to AP RSN IE without RSN Capabilities Connect STA wlan0 to AP RSN IE without AKM Connect STA wlan0 to AP RSN IE without pairwise Connect STA wlan0 to AP RSN IE without group Connect STA wlan0 to AP Normal wpa_supplicant assoc req RSN IE Connect STA wlan0 to AP Group management cipher included in assoc req RSN IE Connect STA wlan0 to AP Invalid group cipher Connect STA wlan0 to AP Invalid pairwise cipher Connect STA wlan0 to AP Management frame protection not enabled Connect STA wlan0 to AP Unsupported management group cipher Connect STA wlan0 to AP PASS ap_wpa2_eap_assoc_rsn 1.879368 2026-09-29 15:52:15.389899 passed all 1 test case(s) 2026-09-29 15:52:15 ./run-tests.py ap_wpa2_eap_in_bridge DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START ap_wpa2_eap_in_bridge 1/1 Test: WPA2-EAP and wpas interface in a bridge Starting AP wlan3 Connect STA wlan5 to AP PASS ap_wpa2_eap_in_bridge 0.912536 2026-09-29 15:52:16.639341 passed all 1 test case(s) 2026-09-29 15:52:16 ./run-tests.py ap_wpa2_eap_oom DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START ap_wpa2_eap_oom 1/1 Test: EAP server and OOM Starting AP wlan3 Connect STA wlan0 to AP PASS ap_wpa2_eap_oom 0.627149 2026-09-29 15:52:17.570604 passed all 1 test case(s) 2026-09-29 15:52:17 ./run-tests.py ap_wpa2_eap_psk DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START ap_wpa2_eap_psk 1/1 Test: WPA2-Enterprise connection using EAP-PSK Starting AP wlan3 Connect STA wlan0 to AP Negative test with incorrect password Connect STA wlan0 to AP PASS ap_wpa2_eap_psk 0.597865 2026-09-29 15:52:18.483057 passed all 1 test case(s) 2026-09-29 15:52:18 ./run-tests.py ap_wpa2_eap_ttls_chap DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START ap_wpa2_eap_ttls_chap 1/1 Test: WPA2-Enterprise connection using EAP-TTLS/CHAP Starting AP wlan3 Connect STA wlan0 to AP PASS ap_wpa2_eap_ttls_chap 0.596241 2026-09-29 15:52:19.394476 passed all 1 test case(s) 2026-09-29 15:52:19 ./run-tests.py ap_wpa2_eap_ttls_expired_cert DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START ap_wpa2_eap_ttls_expired_cert 1/1 Test: WPA2-Enterprise using EAP-TTLS and expired certificate Starting AP wlan3 Connect STA wlan0 to AP PASS ap_wpa2_eap_ttls_expired_cert 0.237533 2026-09-29 15:52:19.941851 passed all 1 test case(s) 2026-09-29 15:52:19 ./run-tests.py ap_wpa2_gtk_initial_rsc_ccmp DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START ap_wpa2_gtk_initial_rsc_ccmp 1/1 Test: Initial group cipher RSC (CCMP) Starting AP wlan3 Connect STA wlan0 to AP PASS ap_wpa2_gtk_initial_rsc_ccmp 10.58837 2026-09-29 15:52:30.846885 passed all 1 test case(s) 2026-09-29 15:52:30 ./run-tests.py ap_wpa2_gtk_rekey_request DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START ap_wpa2_gtk_rekey_request 1/1 Test: WPA2-PSK AP and GTK rekey request from multiple stations Starting AP wlan3 Connect STA wlan0 to AP Connect STA wlan1 to AP Connect STA wlan2 to AP PASS ap_wpa2_gtk_rekey_request 1.940159 2026-09-29 15:52:33.088115 passed all 1 test case(s) 2026-09-29 15:52:33 ./run-tests.py ap_wpa2_psk_ap_control_port_disabled DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START ap_wpa2_psk_ap_control_port_disabled 1/1 Test: WPA2-PSK AP with nl80211 control port in AP mode disabled Starting AP wlan3 AP driver flags: ['SME', 'AP', 'SET_KEYS_AFTER_ASSOC_DONE', 'HT_2040_COEX', 'P2P_CONCURRENT', 'P2P_CAPABLE', 'AP_TEARDOWN_SUPPORT', 'P2P_MGMT_AND_NON_P2P', 'VALID_ERROR_CODES', 'OFFCHANNEL_TX', 'EAPOL_TX_STATUS', 'DEAUTH_TX_STATUS', 'TDLS_SUPPORT', 'TDLS_EXTERNAL_SETUP', 'AP_UAPSD', 'AP_MLME', 'SAE', 'IBSS', 'RADAR', 'QOS_MAPPING', 'AP_CSA', 'MESH', 'HT_IBSS', 'VHT_IBSS', 'FULL_AP_CLIENT_STATE', 'SUPPORT_FILS', 'BEACON_RATE_LEGACY', 'FTM_RESPONDER', 'CONTROL_PORT', 'SAFE_PTK0_REKEYS', 'BEACON_PROTECTION', 'EXTENDED_KEY_ID'] AP driver flags2: ['CONTROL_PORT_RX', 'AP_SME', 'RADAR_BACKGROUND', 'SCAN_MIN_PREQ', 'SPP_AMSDU', 'UNKNOWN', 'UNKNOWN', 'UNKNOWN', 'UNKNOWN', 'UNKNOWN', 'UNKNOWN'] STA driver flags: ['SME', 'AP', 'SET_KEYS_AFTER_ASSOC_DONE', 'HT_2040_COEX', 'P2P_CONCURRENT', 'P2P_CAPABLE', 'AP_TEARDOWN_SUPPORT', 'P2P_MGMT_AND_NON_P2P', 'VALID_ERROR_CODES', 'OFFCHANNEL_TX', 'EAPOL_TX_STATUS', 'DEAUTH_TX_STATUS', 'TDLS_SUPPORT', 'TDLS_EXTERNAL_SETUP', 'AP_UAPSD', 'AP_MLME', 'SAE', 'IBSS', 'RADAR', 'QOS_MAPPING', 'AP_CSA', 'MESH', 'HT_IBSS', 'VHT_IBSS', 'FULL_AP_CLIENT_STATE', 'SUPPORT_FILS', 'BEACON_RATE_LEGACY', 'FTM_RESPONDER', 'CONTROL_PORT', 'SAFE_PTK0_REKEYS', 'BEACON_PROTECTION', 'EXTENDED_KEY_ID'] STA driver flags2: ['CONTROL_PORT_RX', 'CONTROL_PORT_TX_STATUS', 'AP_SME', 'RADAR_BACKGROUND', 'SCAN_MIN_PREQ', 'SPP_AMSDU', 'UNKNOWN', 'UNKNOWN', 'UNKNOWN', 'UNKNOWN', 'UNKNOWN', 'UNKNOWN'] Connect STA wlan0 to AP PASS ap_wpa2_psk_ap_control_port_disabled 0.747389 2026-09-29 15:52:34.135165 passed all 1 test case(s) 2026-09-29 15:52:34 ./run-tests.py ap_wpa2_tdls_decline_resp DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START ap_wpa2_tdls_decline_resp 1/1 Test: Decline TDLS Setup Response Starting AP wlan3 Connect STA wlan0 to AP Connect STA wlan1 to AP Setup TDLS PASS ap_wpa2_tdls_decline_resp 2.424363 2026-09-29 15:52:36.875846 passed all 1 test case(s) 2026-09-29 15:52:36 ./run-tests.py ap_wpa_gtk_rekey DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START ap_wpa_gtk_rekey 1/1 Test: WPA-PSK/TKIP AP and GTK rekey enforced by AP Starting AP wlan3 Connect STA wlan0 to AP PASS ap_wpa_gtk_rekey 1.284315 2026-09-29 15:52:38.471585 passed all 1 test case(s) 2026-09-29 15:52:38 ./run-tests.py ap_wps_conf_pin DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START ap_wps_conf_pin 1/1 Test: WPS PIN provisioning with configured AP Starting AP wlan3 WPS provisioning step Try to connect from another station using the same PIN PASS ap_wps_conf_pin 13.171327 2026-09-29 15:52:51.958482 passed all 1 test case(s) 2026-09-29 15:52:52 ./run-tests.py ap_wps_conf_pin_gcmp_128 DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START ap_wps_conf_pin_gcmp_128 1/1 Test: WPS PIN provisioning with configured AP using GCMP-128 Starting AP wlan3 WPS provisioning step PASS ap_wps_conf_pin_gcmp_128 0.798957 2026-09-29 15:52:53.087573 passed all 1 test case(s) 2026-09-29 15:52:53 ./run-tests.py ap_wps_incorrect_pin DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START ap_wps_incorrect_pin 1/1 Test: WPS PIN provisioning with incorrect PIN Starting AP wlan3 WPS provisioning attempt 1 WPS provisioning attempt 2 wlan0: Ignore unexpected status-driver line: ignore_next_local_deauth PASS ap_wps_incorrect_pin 5.490748 2026-09-29 15:52:58.905856 passed all 1 test case(s) 2026-09-29 15:52:58 ./run-tests.py ap_wps_random_ap_pin DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START ap_wps_random_ap_pin 1/1 Test: WPS registrar using random AP PIN Starting AP wlan3 WPS provisioning step WPS provisioning step with AP PIN disabled WPS provisioning step with AP PIN reset WPS provisioning step after AP PIN timeout WPS provisioning step after AP PIN timeout(2) wlan1: Ignore unexpected status-driver line: ignore_next_local_deauth PASS ap_wps_random_ap_pin 3.67252 2026-09-29 15:53:02.903169 passed all 1 test case(s) 2026-09-29 15:53:02 ./run-tests.py ap_wps_upnp DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START ap_wps_upnp 1/1 Test: WPS AP and UPnP operations Starting AP wlan3 PASS ap_wps_upnp 0.199851 2026-09-29 15:53:03.410787 passed all 1 test case(s) 2026-09-29 15:53:03 ./run-tests.py autogo_force_diff_channel DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START autogo_force_diff_channel 1/1 Test: P2P autonomous GO and station interface operate on different channels Starting AP wlan3 Connect STA wlan7 to AP Start autonomous GO wlan7 Start autonomous GO wlan7 Start autonomous GO wlan7 PASS autogo_force_diff_channel 1.756018 2026-09-29 15:53:05.479933 passed all 1 test case(s) 2026-09-29 15:53:05 ./run-tests.py connect_mbssid_open_1 DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START connect_mbssid_open_1 1/1 Test: Connect to transmitting and nontransmitting BSS in open mode Starting AP wlan3 Connect STA wlan0 to AP Connect STA wlan0 to AP Connect STA wlan0 to AP wlan0: Waiting for scan operation to complete before continuing Run FLUSH again since scan was in progress PASS connect_mbssid_open_1 1.546653 2026-09-29 15:53:07.344354 passed all 1 test case(s) 2026-09-29 15:53:07 ./run-tests.py dbus_bss_expire DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START dbus_bss_expire 1/1 Test: D-Bus Get/Set BSSExpireAge and BSSExpireCount PASS dbus_bss_expire 0.065391 2026-09-29 15:53:07.721241 passed all 1 test case(s) 2026-09-29 15:53:07 ./run-tests.py dbus_connect_eap DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START dbus_connect_eap 1/1 Test: D-Bus AddNetwork and connect to EAP network Starting AP wlan3 altsubject: DNS:server.w1.fi Set dNSName constraint altsubject: DNS:server.w1.fi Set non-matching dNSName constraint altsubject: DNS:server.w1.fi PASS dbus_connect_eap 0.682066 2026-09-29 15:53:08.713308 passed all 1 test case(s) 2026-09-29 15:53:08 ./run-tests.py dbus_p2p_invalid DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START dbus_p2p_invalid 1/1 Test: D-Bus invalid P2P operations PASS dbus_p2p_invalid 0.077479 2026-09-29 15:53:09.114893 passed all 1 test case(s) 2026-09-29 15:53:09 ./run-tests.py discovery_dev_type_go DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START discovery_dev_type_go 1/1 Test: P2P device discovery with Device Type filter on GO wlan1: Trying to discover peer 02:00:00:00:00:00 PASS discovery_dev_type_go 9.272376 2026-09-29 15:53:18.704144 passed all 1 test case(s) 2026-09-29 15:53:18 ./run-tests.py dpp_ap_config_p256_p521 DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START dpp_ap_config_p256_p521 1/1 Test: DPP and AP configuration (P-256 + P-521) Starting AP wlan3 Update AP configuration Connect STA wlan1 to AP Check data connection PASS dpp_ap_config_p256_p521 0.702234 2026-09-29 15:53:19.731688 passed all 1 test case(s) 2026-09-29 15:53:19 ./run-tests.py dpp_ap_config_p384_p384 DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START dpp_ap_config_p384_p384 1/1 Test: DPP and AP configuration (P-384 + P-384) Starting AP wlan3 Update AP configuration Connect STA wlan1 to AP Check data connection PASS dpp_ap_config_p384_p384 0.708685 2026-09-29 15:53:20.756552 passed all 1 test case(s) 2026-09-29 15:53:20 ./run-tests.py dpp_config_dpp_gen_prime256v1_prime256v1 DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START dpp_config_dpp_gen_prime256v1_prime256v1 1/1 Test: Generate DPP Config Object for DPP network (P-256 + P-256) dev0 displays QR Code dev1 scans QR Code and initiates DPP Authentication PASS dpp_config_dpp_gen_prime256v1_prime256v1 0.074631 2026-09-29 15:53:21.153541 passed all 1 test case(s) 2026-09-29 15:53:21 ./run-tests.py dpp_config_error_legacy_invalid_psk DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START dpp_config_error_legacy_invalid_psk 1/1 Test: DPP Config Object legacy error - invalid psk_hex dev0 displays QR Code dev1 scans QR Code and initiates DPP Authentication PASS dpp_config_error_legacy_invalid_psk 0.071014 2026-09-29 15:53:21.539099 passed all 1 test case(s) 2026-09-29 15:53:21 ./run-tests.py dpp_config_no_signed_connector DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START dpp_config_no_signed_connector 1/1 Test: DPP Config Object error - no signedConnector dev0 displays QR Code dev1 scans QR Code and initiates DPP Authentication PASS dpp_config_no_signed_connector 0.076998 2026-09-29 15:53:21.928799 passed all 1 test case(s) 2026-09-29 15:53:21 ./run-tests.py dpp_config_root_not_an_object DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START dpp_config_root_not_an_object 1/1 Test: DPP Config Object error - root not an object dev0 displays QR Code dev1 scans QR Code and initiates DPP Authentication PASS dpp_config_root_not_an_object 0.072408 2026-09-29 15:53:22.344375 passed all 1 test case(s) 2026-09-29 15:53:22 ./run-tests.py dpp_controller_rx_failure DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START dpp_controller_rx_failure 1/1 Test: DPP Controller RX failure PASS dpp_controller_rx_failure 0.075883 2026-09-29 15:53:22.739036 passed all 1 test case(s) 2026-09-29 15:53:22 ./run-tests.py dpp_pfs_connect_cmd_ap_2_sae DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START dpp_pfs_connect_cmd_ap_2_sae 1/1 Test: DPP PFS and cfg80211 connect command (PFS not allowed by AP; SAE enabled) Starting AP wlan3 Connect STA wlan5 to AP Connect STA wlan5 to AP Connect STA wlan5 to AP PASS dpp_pfs_connect_cmd_ap_2_sae 1.002586 2026-09-29 15:53:24.059487 passed all 1 test case(s) 2026-09-29 15:53:24 ./run-tests.py dpp_pkex_identifier_mismatch DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START dpp_pkex_identifier_mismatch 1/1 Test: DPP and PKEX with different identifiers PASS dpp_pkex_identifier_mismatch 1.164262 2026-09-29 15:53:25.548242 passed all 1 test case(s) 2026-09-29 15:53:25 ./run-tests.py dpp_proto_auth_conf_i_auth_mismatch DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START dpp_proto_auth_conf_i_auth_mismatch 1/1 Test: DPP protocol testing - I-auth mismatch in Auth Conf PASS dpp_proto_auth_conf_i_auth_mismatch 0.066386 2026-09-29 15:53:25.921206 passed all 1 test case(s) 2026-09-29 15:53:25 ./run-tests.py dpp_push_button_unsupported_ap_conf DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START dpp_push_button_unsupported_ap_conf 1/1 Test: DPP push button and unsupported AP configuration Starting AP wlan3 PASS dpp_push_button_unsupported_ap_conf 100.591683 2026-09-29 15:55:06.823327 passed all 1 test case(s) 2026-09-29 15:55:06 ./run-tests.py dpp_qr_code_chan_list_broadcast DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START dpp_qr_code_chan_list_broadcast 1/1 Test: DPP QR Code and some 2.4 GHz channels (broadcast) dev0 displays QR Code dev1 scans QR Code and initiates DPP Authentication PASS dpp_qr_code_chan_list_broadcast 1.082293 2026-09-29 15:55:08.209105 passed all 1 test case(s) 2026-09-29 15:55:08 ./run-tests.py dpp_qr_code_parsing_fail DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START dpp_qr_code_parsing_fail 1/1 Test: DPP QR Code parsing local failure PASS dpp_qr_code_parsing_fail 0.055266 2026-09-29 15:55:08.565543 passed all 1 test case(s) 2026-09-29 15:55:08 ./run-tests.py dpp_tcp_mutual_hostapd_conf DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START dpp_tcp_mutual_hostapd_conf 1/1 Test: DPP over TCP (mutual, hostapd as Configurator) Starting AP wlan3 PASS dpp_tcp_mutual_hostapd_conf 2.26454 2026-09-29 15:55:11.132516 passed all 1 test case(s) 2026-09-29 15:55:11 ./run-tests.py eap_canned_success_before_method DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START eap_canned_success_before_method 1/1 Test: EAP protocol tests for canned EAP-Success before any method Starting AP wlan3 Connect STA wlan0 to AP PASS eap_canned_success_before_method 0.293796 2026-09-29 15:55:11.728589 passed all 1 test case(s) 2026-09-29 15:55:11 ./run-tests.py eap_proto_psk_server DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START eap_proto_psk_server 1/1 Test: EAP-PSK protocol testing for the server Starting AP wlan3 Connect STA wlan0 to AP Connect STA wlan0 to AP Connect STA wlan0 to AP Connect STA wlan0 to AP Connect STA wlan0 to AP PASS eap_proto_psk_server 0.652109 2026-09-29 15:55:12.680364 passed all 1 test case(s) 2026-09-29 15:55:12 ./run-tests.py eap_teap_eap_mschapv2_separate_result DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START eap_teap_eap_mschapv2_separate_result 1/1 Test: EAP-TEAP with inner EAP-MSCHAPv2 and separate message for Result TLV Starting AP wlan3 Connect STA wlan0 to AP PASS eap_teap_eap_mschapv2_separate_result 0.451141 2026-09-29 15:55:13.436302 passed all 1 test case(s) 2026-09-29 15:55:13 ./run-tests.py eap_teap_peer_outer_tlvs DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START eap_teap_peer_outer_tlvs 1/1 Test: EAP-TEAP with peer Outer TLVs Starting AP wlan3 Connect STA wlan0 to AP PASS eap_teap_peer_outer_tlvs 0.413558 2026-09-29 15:55:14.158654 passed all 1 test case(s) 2026-09-29 15:55:14 ./run-tests.py eht_mld_and_mlds DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START eht_mld_and_mlds 1/1 Test: EHT AP MLD and multiple non-AP MLDs Adding link on: ifname=wlan7 Connect STA wlan8 to AP Connect STA wlan9 to AP Assigned AIDs: [1, 2] PASS eht_mld_and_mlds 1.34204 2026-09-29 15:55:15.807220 passed all 1 test case(s) 2026-09-29 15:55:15 ./run-tests.py eht_mld_owe_6_link DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START eht_mld_owe_6_link 1/1 Test: AP MLD with MLD client OWE connection - 6 link Adding link on: ifname=wlan7 Adding link on: ifname=wlan7 Adding link on: ifname=wlan7 Adding link on: ifname=wlan7 Adding link on: ifname=wlan7 Adding link on: ifname=wlan7 Connect STA wlan0 to AP Connect STA wlan8 to AP hostapd STATUS: {'state': 'ENABLED', 'phy': 'phy11', 'freq': '2412', 'num_sta_non_erp': '0', 'num_sta_no_short_slot_time': '0', 'num_sta_no_short_preamble': '0', 'olbc': '0', 'num_sta_ht_no_gf': '0', 'num_sta_no_ht': '0', 'num_sta_ht_20_mhz': '0', 'num_sta_ht40_intolerant': '0', 'olbc_ht': '0', 'ht_op_mode': '0x0', 'hw_mode': 'g', 'cac_time_seconds': '0', 'cac_time_left_seconds': 'N/A', 'channel': '1', 'edmg_enable': '0', 'edmg_channel': '0', 'secondary_channel': '0', 'ieee80211n': '1', 'ieee80211ac': '0', 'ieee80211ax': '1', 'ieee80211be': '1', 'ieee80211bn': '0', 'beacon_int': '100', 'dtim_period': '2', 'eht_oper_chwidth': '0', 'eht_oper_centr_freq_seg0_idx': '0', 'num_links': '6', 'link_id': '0', 'link_addr': '02:00:00:ec:cf:93', 'partner_link[1]': '02:00:00:37:4b:1d', 'partner_link[2]': '02:00:00:de:70:39', 'partner_link[3]': '02:00:00:d6:e5:4b', 'partner_link[4]': '02:00:00:3f:8d:d8', 'partner_link[5]': '02:00:00:b3:06:17', 'ap_mld_type': 'STR', 'he_oper_chwidth': '0', 'he_oper_centr_freq_seg0_idx': '0', 'he_oper_centr_freq_seg1_idx': '0', 'ht_caps_info': '000c', 'ht_mcs_bitmask': 'ffff0000000000000000', 'supported_rates': '02 04 0b 16 0c 12 18 24 30 48 60 6c', 'max_txpower': '20', 'bss[0]': 'wlan7', 'bssid[0]': '02:00:00:ec:cf:93', 'ssid[0]': 'mld_ap_owe', 'num_sta[0]': '2', 'mld_addr[0]': '02:00:00:00:0b:00', 'mld_id[0]': '0', 'mld_link_id[0]': '0'} hostapd STA: {'addr': '02:00:00:00:0c:00', 'flags': '[AUTH][ASSOC][AUTHORIZED][SHORT_PREAMBLE][WMM][MFP][HT][HE][EHT]', 'aid': '2', 'capability': '0x430', 'listen_interval': '5', 'supported_rates': '02 04 0b 16 0c 12 18 24 30 48 60 6c', 'timeout_next': 'NULLFUNC POLL', 'auth_alg': '0', 'dot11RSNAStatsSTAAddress': '02:00:00:00:0c:00', 'dot11RSNAStatsVersion': '1', 'dot11RSNAStatsSelectedPairwiseCipher': '00-0f-ac-4', 'dot11RSNAStatsTKIPLocalMICFailures': '0', 'dot11RSNAStatsTKIPRemoteMICFailures': '0', 'wpa': '2', 'AKMSuiteSelector': '00-0f-ac-18', 'hostapdWPAPTKState': '11', 'hostapdWPAPTKGroupState': '0', 'hostapdMFPR': '1', 'rx_packets': '9', 'tx_packets': '4', 'rx_bytes': '1269', 'tx_bytes': '2356', 'inactive_msec': '0', 'signal': '-50', 'rx_rate_info': '10', 'tx_rate_info': '0', 'ht_mcs_bitmask': 'ffff0000000000000000', 'connected_time': '0', 'supp_op_classes': '5151525354737475767778797a7b7c7d7e7f8081008280', 'he_capab': '0178c81a400002bfce0000000000000000fafffaff', 'eht_capab': '07007c0000feffff0f01008888880000', 'ht_caps_info': '0x13fe', 'ext_capab': '04004a02014000400001', 'peer_addr[0]': '96:d1:6b:be:a2:72', 'peer_addr[1]': 'fe:5a:10:58:4a:57', 'peer_addr[2]': '4e:d0:3d:06:d5:d9', 'peer_addr[3]': '72:0c:5e:46:16:00', 'peer_addr[4]': '62:39:43:3b:09:36', 'peer_addr[5]': '0e:c6:c2:d8:b4:60', 'max_simul_links': '0'} valid_links=0x3f active_links=0x3f station status: {'bssid': '02:00:00:00:0b:00', 'freq': '2412', 'ssid': 'mld_ap_owe', 'id': '0', 'mode': 'station', 'wifi_generation': '7', 'max_nss_rx': '2', 'max_nss_tx': '2', 'channel_width': '20', 'pairwise_cipher': 'CCMP', 'group_cipher': 'CCMP', 'key_mgmt': 'OWE', 'pmf': '2', 'mgmt_group_cipher': 'BIP', 'pmk_len': '32', 'ptk_len': '48', 'kck_len': '16', 'kek_len': '16', 'tk_len': '16', 'mic_len': '16', 'wpa_state': 'COMPLETED', 'p2p_device_address': '02:00:00:00:0c:00', 'address': '02:00:00:00:0c:00', 'ap_mld_addr': '02:00:00:00:0b:00', 'uuid': '9de743b6-fd9f-55bf-8aeb-3627850be581', 'bss_max_idle_period': '292'} PASS eht_mld_owe_6_link 2.474319 2026-09-29 15:55:18.586141 passed all 1 test case(s) 2026-09-29 15:55:18 ./run-tests.py eht_non_assoc_links_rejected DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START eht_non_assoc_links_rejected 1/1 Test: EHT MLD AP with all non assoc links rejected in association Adding link on: ifname=wlan7 Adding link on: ifname=wlan7 Connect STA wlan8 to AP station status: {'bssid': '02:00:00:00:0d:00', 'freq': '2412', 'ssid': 'mld_ap', 'id': '0', 'mode': 'station', 'wifi_generation': '7', 'max_nss_rx': '2', 'max_nss_tx': '2', 'channel_width': '20', 'pairwise_cipher': 'CCMP', 'group_cipher': 'CCMP', 'key_mgmt': 'SAE', 'pmf': '2', 'mgmt_group_cipher': 'BIP', 'pmk_len': '32', 'ptk_len': '48', 'kck_len': '16', 'kek_len': '16', 'tk_len': '16', 'mic_len': '16', 'sae_group': '19', 'sae_h2e': '1', 'sae_pk': '0', 'wpa_state': 'COMPLETED', 'p2p_device_address': '02:00:00:00:0e:00', 'address': '02:00:00:00:0e:00', 'ap_mld_addr': '02:00:00:00:0d:00', 'uuid': '6115d620-7c48-5913-b99c-f94222e380e8', 'bss_max_idle_period': '292', 'ssid_verified': '1'} hostapd STATUS: {'state': 'ENABLED', 'phy': 'phy13', 'freq': '2412', 'num_sta_non_erp': '0', 'num_sta_no_short_slot_time': '0', 'num_sta_no_short_preamble': '0', 'olbc': '0', 'num_sta_ht_no_gf': '0', 'num_sta_no_ht': '0', 'num_sta_ht_20_mhz': '0', 'num_sta_ht40_intolerant': '0', 'olbc_ht': '0', 'ht_op_mode': '0x0', 'hw_mode': 'g', 'cac_time_seconds': '0', 'cac_time_left_seconds': 'N/A', 'channel': '1', 'edmg_enable': '0', 'edmg_channel': '0', 'secondary_channel': '0', 'ieee80211n': '1', 'ieee80211ac': '0', 'ieee80211ax': '1', 'ieee80211be': '1', 'ieee80211bn': '0', 'beacon_int': '100', 'dtim_period': '2', 'eht_oper_chwidth': '0', 'eht_oper_centr_freq_seg0_idx': '0', 'num_links': '2', 'link_id': '0', 'link_addr': '00:11:22:33:44:01', 'partner_link[1]': '00:11:22:33:44:02', 'ap_mld_type': 'STR', 'he_oper_chwidth': '0', 'he_oper_centr_freq_seg0_idx': '0', 'he_oper_centr_freq_seg1_idx': '0', 'ht_caps_info': '000c', 'ht_mcs_bitmask': 'ffff0000000000000000', 'supported_rates': '02 04 0b 16 0c 12 18 24 30 48 60 6c', 'max_txpower': '20', 'bss[0]': 'wlan7', 'bssid[0]': '00:11:22:33:44:01', 'ssid[0]': 'mld_ap', 'num_sta[0]': '1', 'mld_addr[0]': '02:00:00:00:0d:00', 'mld_id[0]': '0', 'mld_link_id[0]': '0'} hostapd STA: {'addr': '02:00:00:00:0e:00', 'flags': '[AUTH][ASSOC][AUTHORIZED][SHORT_PREAMBLE][WMM][MFP][HT][HE][EHT]', 'aid': '1', 'capability': '0x430', 'listen_interval': '5', 'supported_rates': '02 04 0b 16 0c 12 18 24 30 48 60 6c', 'timeout_next': 'NULLFUNC POLL', 'auth_alg': '3', 'dot11RSNAStatsSTAAddress': '02:00:00:00:0e:00', 'dot11RSNAStatsVersion': '1', 'dot11RSNAStatsSelectedPairwiseCipher': '00-0f-ac-4', 'dot11RSNAStatsTKIPLocalMICFailures': '0', 'dot11RSNAStatsTKIPRemoteMICFailures': '0', 'wpa': '2', 'AKMSuiteSelector': '00-0f-ac-8', 'hostapdWPAPTKState': '11', 'hostapdWPAPTKGroupState': '0', 'hostapdMFPR': '1', 'rx_packets': '7', 'tx_packets': '5', 'rx_bytes': '850', 'tx_bytes': '959', 'inactive_msec': '0', 'signal': '-50', 'rx_rate_info': '10', 'tx_rate_info': '0', 'ht_mcs_bitmask': 'ffff0000000000000000', 'connected_time': '0', 'sae_group': '19', 'sae_rejected_groups': '', 'supp_op_classes': '5151525354737475767778797a7b7c7d7e7f8081008280', 'he_capab': '0178c81a400002bfce0000000000000000fafffaff', 'eht_capab': '07007c0000feffff0f01008888880000', 'ht_caps_info': '0x13fe', 'ext_capab': '04004a02014000400001', 'peer_addr[0]': '22:9f:38:8e:6e:d6', 'peer_addr[1]': '0e:67:7f:70:d6:7a', 'max_simul_links': '0'} valid_links=0x1 active_links=0x1 PASS eht_non_assoc_links_rejected 1.113364 2026-09-29 15:55:20.023342 passed all 1 test case(s) 2026-09-29 15:55:20 ./run-tests.py eppke_mld_sta_with_base_akm_sae_ext_group_retry DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START eppke_mld_sta_with_base_akm_sae_ext_group_retry 1/1 Test: EPPKE MLD AP with MLD STA: PASN group retry from 19 to 20 (AP supports groups 20 and 21) Adding link on: ifname=wlan7 Adding link on: ifname=wlan7 Connect STA wlan8 to AP hostapd STATUS: {'state': 'ENABLED', 'phy': 'phy15', 'freq': '2412', 'num_sta_non_erp': '0', 'num_sta_no_short_slot_time': '0', 'num_sta_no_short_preamble': '0', 'olbc': '0', 'num_sta_ht_no_gf': '0', 'num_sta_no_ht': '0', 'num_sta_ht_20_mhz': '0', 'num_sta_ht40_intolerant': '0', 'olbc_ht': '0', 'ht_op_mode': '0x0', 'hw_mode': 'g', 'cac_time_seconds': '0', 'cac_time_left_seconds': 'N/A', 'channel': '1', 'edmg_enable': '0', 'edmg_channel': '0', 'secondary_channel': '0', 'ieee80211n': '1', 'ieee80211ac': '0', 'ieee80211ax': '1', 'ieee80211be': '1', 'ieee80211bn': '0', 'beacon_int': '100', 'dtim_period': '2', 'eht_oper_chwidth': '0', 'eht_oper_centr_freq_seg0_idx': '0', 'num_links': '2', 'link_id': '0', 'link_addr': '02:00:00:e0:55:1d', 'partner_link[1]': '02:00:00:5c:a9:b5', 'ap_mld_type': 'STR', 'he_oper_chwidth': '0', 'he_oper_centr_freq_seg0_idx': '0', 'he_oper_centr_freq_seg1_idx': '0', 'ht_caps_info': '000c', 'ht_mcs_bitmask': 'ffff0000000000000000', 'supported_rates': '02 04 0b 16 0c 12 18 24 30 48 60 6c', 'max_txpower': '20', 'bss[0]': 'wlan7', 'bssid[0]': '02:00:00:e0:55:1d', 'ssid[0]': 'test-eppke-authentication', 'num_sta[0]': '1', 'mld_addr[0]': '02:00:00:00:0f:00', 'mld_id[0]': '0', 'mld_link_id[0]': '0'} hostapd STA: {'addr': '02:00:00:00:10:00', 'flags': '[AUTH][ASSOC][AUTHORIZED][SHORT_PREAMBLE][WMM][MFP][HT][HE][EHT]', 'aid': '1', 'capability': '0x430', 'listen_interval': '5', 'supported_rates': '02 04 0b 16 0c 12 18 24 30 48 60 6c', 'timeout_next': 'NULLFUNC POLL', 'auth_alg': '9', 'dot11RSNAStatsSTAAddress': '02:00:00:00:10:00', 'dot11RSNAStatsVersion': '1', 'dot11RSNAStatsSelectedPairwiseCipher': '00-0f-ac-9', 'dot11RSNAStatsTKIPLocalMICFailures': '0', 'dot11RSNAStatsTKIPRemoteMICFailures': '0', 'wpa': '2', 'AKMSuiteSelector': '00-0f-ac-24', 'hostapdWPAPTKState': '11', 'hostapdWPAPTKGroupState': '0', 'hostapdMFPR': '1', 'rx_packets': '5', 'tx_packets': '2', 'rx_bytes': '518', 'tx_bytes': '1044', 'inactive_msec': '1', 'signal': '-50', 'rx_rate_info': '0', 'tx_rate_info': '0', 'ht_mcs_bitmask': 'ffff0000000000000000', 'connected_time': '0', 'supp_op_classes': '5151525354737475767778797a7b7c7d7e7f8081008280', 'he_capab': '0178c81a400002bfce0000000000000000fafffaff', 'eht_capab': '07007c0000feffff0f01008888880000', 'ht_caps_info': '0x13fe', 'ext_capab': '04004a02014000400001', 'peer_addr[0]': '82:16:c9:84:3d:6e', 'peer_addr[1]': '1a:77:5e:73:bb:68', 'max_simul_links': '0'} valid_links=0x3 active_links=0x3 PASS eppke_mld_sta_with_base_akm_sae_ext_group_retry 1.144104 2026-09-29 15:55:21.488280 passed all 1 test case(s) 2026-09-29 15:55:21 ./run-tests.py fst_ap_ctrl_iface DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START fst_ap_ctrl_iface 1/1 Test: FST control interface behavior Starting AP wlan3 (old add_ap argument type) Exception during test execution: AP startup failed Traceback (most recent call last): File "/lkp/benchmarks/hwsim/tests/hwsim/./run-tests.py", line 633, in main t(dev, apdev, params) ~^^^^^^^^^^^^^^^^^^^^ File "/lkp/benchmarks/hwsim/tests/hwsim/test_fst_module.py", line 1415, in test_fst_ap_ctrl_iface ap1, ap2, sta1, sta2 = fst_module_aux.start_two_ap_sta_pairs(apdev) ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^^^^^^^ File "/lkp/benchmarks/hwsim/tests/hwsim/fst_module_aux.py", line 78, in start_two_ap_sta_pairs ap1.start() ~~~~~~~~~^^ File "/lkp/benchmarks/hwsim/tests/hwsim/fst_module_aux.py", line 613, in start self.hapd = hostapd.add_ap(self.iface, params) ~~~~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^ File "/lkp/benchmarks/hwsim/tests/hwsim/hostapd.py", line 719, in add_ap raise Exception("AP startup failed") Exception: AP startup failed FAIL fst_ap_ctrl_iface 5.115229 2026-09-29 15:55:26.919213 passed 0 test case(s) skipped 0 test case(s) failed tests: fst_ap_ctrl_iface 2026-09-29 15:55:26 ./run-tests.py fst_sta_config_llt_neg DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START fst_sta_config_llt_neg 1/1 Test: FST STA configuration negative LLT kill_pid: pidfile logs/current/mywpa_supplicant.pid does not exist - try again after a second kill_pid: pidfile logs/current/mywpa_supplicant.pid does not exist - could not kill the process PASS fst_sta_config_llt_neg 1.211597 2026-09-29 15:55:28.443767 passed all 1 test case(s) 2026-09-29 15:55:28 ./run-tests.py fst_sta_session_request_with_no_session DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START fst_sta_session_request_with_no_session 1/1 Test: FST STA session request with no session Starting AP wlan3 (old add_ap argument type) Exception during test execution: AP startup failed Traceback (most recent call last): File "/lkp/benchmarks/hwsim/tests/hwsim/./run-tests.py", line 633, in main t(dev, apdev, params) ~^^^^^^^^^^^^^^^^^^^^ File "/lkp/benchmarks/hwsim/tests/hwsim/test_fst_module.py", line 1676, in test_fst_sta_session_request_with_no_session fst_send_unexpected_frame(apdev, test_params, frame_type_session_request, ~~~~~~~~~~~~~~~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ False) ^^^^^^ File "/lkp/benchmarks/hwsim/tests/hwsim/test_fst_module.py", line 552, in fst_send_unexpected_frame ap1, ap2, sta1, sta2 = fst_module_aux.start_two_ap_sta_pairs(apdev) ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^^^^^^^ File "/lkp/benchmarks/hwsim/tests/hwsim/fst_module_aux.py", line 78, in start_two_ap_sta_pairs ap1.start() ~~~~~~~~~^^ File "/lkp/benchmarks/hwsim/tests/hwsim/fst_module_aux.py", line 613, in start self.hapd = hostapd.add_ap(self.iface, params) ~~~~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^ File "/lkp/benchmarks/hwsim/tests/hwsim/hostapd.py", line 719, in add_ap raise Exception("AP startup failed") Exception: AP startup failed FAIL fst_sta_session_request_with_no_session 5.094521 2026-09-29 15:55:33.857438 passed 0 test case(s) skipped 0 test case(s) failed tests: fst_sta_session_request_with_no_session 2026-09-29 15:55:33 ./run-tests.py fst_sta_tear_down_response_with_no_session DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START fst_sta_tear_down_response_with_no_session 1/1 Test: FST STA tear down response with no session Starting AP wlan3 (old add_ap argument type) Exception during test execution: AP startup failed Traceback (most recent call last): File "/lkp/benchmarks/hwsim/tests/hwsim/./run-tests.py", line 633, in main t(dev, apdev, params) ~^^^^^^^^^^^^^^^^^^^^ File "/lkp/benchmarks/hwsim/tests/hwsim/test_fst_module.py", line 1702, in test_fst_sta_tear_down_response_with_no_session fst_send_unexpected_frame(apdev, test_params, frame_type_tear_down, False) ~~~~~~~~~~~~~~~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/lkp/benchmarks/hwsim/tests/hwsim/test_fst_module.py", line 552, in fst_send_unexpected_frame ap1, ap2, sta1, sta2 = fst_module_aux.start_two_ap_sta_pairs(apdev) ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^^^^^^^ File "/lkp/benchmarks/hwsim/tests/hwsim/fst_module_aux.py", line 78, in start_two_ap_sta_pairs ap1.start() ~~~~~~~~~^^ File "/lkp/benchmarks/hwsim/tests/hwsim/fst_module_aux.py", line 613, in start self.hapd = hostapd.add_ap(self.iface, params) ~~~~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^ File "/lkp/benchmarks/hwsim/tests/hwsim/hostapd.py", line 719, in add_ap raise Exception("AP startup failed") Exception: AP startup failed FAIL fst_sta_tear_down_response_with_no_session 5.094787 2026-09-29 15:55:39.271266 passed 0 test case(s) skipped 0 test case(s) failed tests: fst_sta_tear_down_response_with_no_session 2026-09-29 15:55:39 ./run-tests.py gas_anqp_max_venue_name DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START gas_anqp_max_venue_name 1/1 Test: GAS/ANQP query for maximum number of venue names Starting AP wlan3 PASS gas_anqp_max_venue_name 1.379903 2026-09-29 15:55:40.963375 passed all 1 test case(s) 2026-09-29 15:55:41 ./run-tests.py gas_comeback_delay_long2 DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START gas_comeback_delay_long2 1/1 Test: GAS long comeback delay over default STA timeout Starting AP wlan3 PASS gas_comeback_delay_long2 7.208839 2026-09-29 15:55:48.489828 passed all 1 test case(s) 2026-09-29 15:55:48 ./run-tests.py gas_failures DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START gas_failures 1/1 Test: GAS failure cases Starting AP wlan3 Starting AP wlan4 PASS gas_failures 0.776713 2026-09-29 15:55:49.584650 passed all 1 test case(s) 2026-09-29 15:55:49 ./run-tests.py grpform_c DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START grpform_c 1/1 Test: P2P group formation using PIN and authorized connection (init -> GO) (group iface) Start GO negotiation wlan0 -> wlan1 wlan1: Trying to discover peer 02:00:00:00:00:00 wlan0: Trying to discover peer 02:00:00:00:01:00 Group formed PASS grpform_c 11.265051 2026-09-29 15:56:01.168646 passed all 1 test case(s) 2026-09-29 15:56:01 ./run-tests.py grpform_ext_listen_oper DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START grpform_ext_listen_oper 1/1 Test: P2P extended listen timing operations wlan0: Trying to discover peer 02:00:00:00:05:00 wlan5: Trying to discover peer 02:00:00:00:00:00 PASS grpform_ext_listen_oper 2.552862 2026-09-29 15:56:04.049037 passed all 1 test case(s) 2026-09-29 15:56:04 ./run-tests.py grpform_per_sta_psk DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START grpform_per_sta_psk 1/1 Test: P2P group formation with per-STA PSKs Start GO negotiation wlan0 -> wlan1 wlan1: Trying to discover peer 02:00:00:00:00:00 wlan0: Trying to discover peer 02:00:00:00:01:00 Group formed wlan2: Trying to discover peer 02:00:00:00:00:00 PASS grpform_per_sta_psk 9.727599 2026-09-29 15:56:14.087227 passed all 1 test case(s) 2026-09-29 15:56:14 ./run-tests.py hapd_ctrl_set_accept_mac_file DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START hapd_ctrl_set_accept_mac_file 1/1 Test: hostapd and SET accept_mac_file ctrl_iface command Starting AP wlan3 Connect STA wlan0 to AP Connect STA wlan1 to AP PASS hapd_ctrl_set_accept_mac_file 1.444347 2026-09-29 15:56:15.869085 passed all 1 test case(s) 2026-09-29 15:56:15 ./run-tests.py hapd_ctrl_vendor_test DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START hapd_ctrl_vendor_test 1/1 Test: hostapd and VENDOR test command Starting AP wlan3 PASS hapd_ctrl_vendor_test 0.113879 2026-09-29 15:56:16.305049 passed all 1 test case(s) 2026-09-29 15:56:16 ./run-tests.py he_6ghz_incumbt_sig_intf_sec40 DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START he_6ghz_incumbt_sig_intf_sec40 1/1 Test: 6 GHz AP with incumbent signal interference in secondary 40 MHz channel Starting AP wlan3 Exception during test execution: Disconnection timed out Traceback (most recent call last): File "/lkp/benchmarks/hwsim/tests/hwsim/test_he.py", line 1988, in he_6ghz_incumbt_sig_intf_bw_reduction hapd = hostapd.add_ap(apdev[0], params, set_channel=False) File "/lkp/benchmarks/hwsim/tests/hwsim/hostapd.py", line 719, in add_ap raise Exception("AP startup failed") Exception: AP startup failed During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/lkp/benchmarks/hwsim/tests/hwsim/./run-tests.py", line 635, in main t(dev, apdev) ~^^^^^^^^^^^^ File "/lkp/benchmarks/hwsim/tests/hwsim/test_he.py", line 2118, in test_he_6ghz_incumbt_sig_intf_sec40 he_6ghz_incumbt_sig_intf_bw_reduction(dev, apdev, params, '0x4', ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^^^^^^^^ expectation) ^^^^^^^^^^^^ File "/lkp/benchmarks/hwsim/tests/hwsim/test_he.py", line 2047, in he_6ghz_incumbt_sig_intf_bw_reduction dev[0].wait_disconnected() ~~~~~~~~~~~~~~~~~~~~~~~~^^ File "/lkp/benchmarks/hwsim/tests/hwsim/wpasupplicant.py", line 1479, in wait_disconnected raise Exception(error) Exception: Disconnection timed out FAIL he_6ghz_incumbt_sig_intf_sec40 15.115629 2026-09-29 15:56:31.731646 passed 0 test case(s) skipped 0 test case(s) failed tests: he_6ghz_incumbt_sig_intf_sec40 2026-09-29 15:56:31 ./run-tests.py he_prefer_he20 DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START he_prefer_he20 1/1 Test: Preference on HE20 over HT20 Starting AP wlan3 Starting AP wlan4 Connect STA wlan0 to AP PASS he_prefer_he20 0.378889 2026-09-29 15:56:32.428981 passed all 1 test case(s) 2026-09-29 15:56:32 ./run-tests.py ieee8021x_auth_alg_eap_psk DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START ieee8021x_auth_alg_eap_psk 1/1 Test: IEEE 802.1X authentication using Authentication frames with EAP-PSK Starting AP wlan3 Connect STA wlan0 to AP Auth Algorithm: 8 PASS ieee8021x_auth_alg_eap_psk 0.554451 2026-09-29 15:56:33.303395 passed all 1 test case(s) 2026-09-29 15:56:33 ./run-tests.py macsec_psk_cak_mismatch DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START macsec_psk_cak_mismatch 1/1 Test: MACsec PSK (CAK mismatch) ip macsec: 55: macsec0: protect on validate strict sc off sa off encrypt on send_sci on end_station off scb off replay off cipher suite: GCM-AES-128, using ICV length 16 TXSC: 6647982261770001 on SA 0 offload: off ip link: 1: lo: mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 2: eth0: mtu 1500 qdisc fq_codel state UP mode DEFAULT group default qlen 1000 link/ether f8:b1:56:ce:16:62 brd ff:ff:ff:ff:ff:ff altname eno1 altname enp0s25 altname enxf8b156ce1662 3: wlan0: mtu 1500 qdisc noqueue state DOWN mode DORMANT group default qlen 1000 link/ether 02:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff altname wlx020000000000 4: wlan1: mtu 1500 qdisc noqueue state DOWN mode DORMANT group default qlen 1000 link/ether 02:00:00:00:01:00 brd ff:ff:ff:ff:ff:ff altname wlx020000000100 5: wlan2: mtu 1500 qdisc noqueue state DOWN mode DORMANT group default qlen 1000 link/ether 02:00:00:00:02:00 brd ff:ff:ff:ff:ff:ff altname wlx020000000200 6: wlan3: mtu 1500 qdisc noqueue state DOWN mode DEFAULT group default qlen 1000 link/ether 02:00:00:00:03:00 brd ff:ff:ff:ff:ff:ff altname wlx020000000300 7: wlan4: mtu 1500 qdisc noqueue state DOWN mode DEFAULT group default qlen 1000 link/ether 02:00:00:00:04:00 brd ff:ff:ff:ff:ff:ff altname wlx020000000400 8: wlan5: mtu 1500 qdisc noqueue state DOWN mode DEFAULT group default qlen 1000 link/ether 02:00:00:00:05:00 brd ff:ff:ff:ff:ff:ff altname wlx020000000500 9: wlan6: mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ether 02:00:00:00:06:00 brd ff:ff:ff:ff:ff:ff altname wlx020000000600 10: hwsim0: mtu 1500 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000 link/ieee802.11/radiotap 12:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff 53: veth1@veth0: mtu 1500 qdisc noqueue state UP mode DEFAULT group default qlen 1000 link/ether 8e:8a:d8:73:31:46 brd ff:ff:ff:ff:ff:ff 54: veth0@veth1: mtu 1500 qdisc noqueue state UP mode DEFAULT group default qlen 1000 link/ether 66:47:98:22:61:77 brd ff:ff:ff:ff:ff:ff 55: macsec0@veth0: mtu 1468 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ether 66:47:98:22:61:77 brd ff:ff:ff:ff:ff:ff wpas0 STATUS: bssid=01:80:c2:00:00:03 freq=0 ssid= id=0 mode=station pairwise_cipher=NONE group_cipher=NONE key_mgmt=NONE mic_len=16 wpa_state=COMPLETED address=66:47:98:22:61:77 PAE KaY status=Not-Active Authenticated=No Secured=No Failed=No Actor Priority=255 Key Server Priority=0 Is Key Server=No Number of Keys Distributed=0 Number of Keys Received=0 MKA Hello Time=2000 actor_sci=66:47:98:22:61:77@1 key_server_sci=00:00:00:00:00:00@0 participant_idx=0 ckn=000102030405060708090a0b0c0d0e0f101112131415161718191a1b1c1d1e1f mi=638fdd06b5e245b36d333692 mn=0 active=No participant=No retain=No live_peers=0 potential_peers=0 is_key_server=Yes is_elected=No uuid=a547d1b3-cf18-5596-8566-562eb941f482 wpas1 STATUS: bssid=01:80:c2:00:00:03 freq=0 ssid= id=0 mode=station pairwise_cipher=NONE group_cipher=NONE key_mgmt=NONE mic_len=16 wpa_state=COMPLETED address=8e:8a:d8:73:31:46 PAE KaY status=Not-Active Authenticated=No Secured=No Failed=No Actor Priority=100 Key Server Priority=0 Is Key Server=No Number of Keys Distributed=0 Number of Keys Received=0 MKA Hello Time=2000 actor_sci=8e:8a:d8:73:31:46@1 key_server_sci=00:00:00:00:00:00@0 participant_idx=0 ckn=000102030405060708090a0b0c0d0e0f101112131415161718191a1b1c1d1e1f mi=c841d2d236a33569c49a6a1b mn=0 active=No participant=No retain=No live_peers=0 potential_peers=0 is_key_server=Yes is_elected=No uuid=a547d1b3-cf18-5596-8566-562eb941f482 wpas0 STATUS-DRIVER: ifname=veth0 ifi=55 parent_ifname=macsec0 parent_ifi=54 wpas1 STATUS-DRIVER: ifname=veth1 ifi=56 parent_ifname=macsec1 parent_ifi=53 PASS macsec_psk_cak_mismatch 9.576845 2026-09-29 15:56:43.198213 passed all 1 test case(s) 2026-09-29 15:56:43 ./run-tests.py mesh_secure_gcmp DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START mesh_secure_gcmp 1/1 Test: Secure mesh with GCMP PASS mesh_secure_gcmp 0.885023 2026-09-29 15:56:44.401124 passed all 1 test case(s) 2026-09-29 15:56:44 ./run-tests.py mesh_wpa_auth_init_oom DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START mesh_wpa_auth_init_oom 1/1 Test: Secure mesh network setup failing due to wpa_init() OOM PASS mesh_wpa_auth_init_oom 0.271115 2026-09-29 15:56:44.991402 passed all 1 test case(s) 2026-09-29 15:56:45 ./run-tests.py multi_ap_wps_split_mixed DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START multi_ap_wps_split_mixed 1/1 Test: WPS on split fronthaul and backhaul AP with mixed-mode fronthaul Starting AP wlan4 Starting AP wlan3 PASS multi_ap_wps_split_mixed 8.407117 2026-09-29 15:56:53.712420 passed all 1 test case(s) 2026-09-29 15:56:53 ./run-tests.py nan_dp_sk_ccmp128 DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START nan_dp_sk_ccmp128 1/1 Test: NAN DP - 2way NDL + SK CCMP security NAN capabilities: USD NAN NAN device starting on nan0 Setting master_pref to 10 on nan0 Setting dual_band to 0 on nan0 NAN device started on nan0 NAN capabilities: USD NAN NAN device starting on nan1 Setting master_pref to 10 on nan1 Setting dual_band to 0 on nan1 NAN device started on nan1 Publish ID: 1, Subscribe ID: 1 FAIL FAIL FAIL NAN device stopping on nan1 NAN device stopped on nan1 NAN device stopping on nan0 NAN device stopped on nan0 Exception during test execution: Failed to configure schedule (sub) Traceback (most recent call last): File "/lkp/benchmarks/hwsim/tests/hwsim/./run-tests.py", line 633, in main t(dev, apdev, params) ~^^^^^^^^^^^^^^^^^^^^ File "/lkp/benchmarks/hwsim/tests/hwsim/test_nan.py", line 1688, in test_nan_dp_sk_ccmp128 run_nan_dp(csid=1) ~~~~~~~~~~^^^^^^^^ File "/lkp/benchmarks/hwsim/tests/hwsim/test_nan.py", line 1587, in run_nan_dp _run_nan_dp(counter=counter, csid=csid, wrong_pwd=wrong_pwd, ~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ use_pmk=use_pmk, use_pwd_hex=use_pwd_hex, ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ ...<3 lines>... mgmt_group_cipher=mgmt_group_cipher, ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ force_conditional=force_conditional) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/lkp/benchmarks/hwsim/tests/hwsim/test_nan.py", line 1531, in _run_nan_dp result = _nan_ndp_request_and_accept(pub, sub, pid, sid, paddr, saddr, req_ssi="aabbcc", ...<6 lines>... sub_interface_id=sub_interface_id, gtk_csid=gtk_csid) File "/lkp/benchmarks/hwsim/tests/hwsim/test_nan.py", line 1359, in _nan_ndp_request_and_accept raise Exception("Failed to configure schedule (sub)") Exception: Failed to configure schedule (sub) FAIL nan_dp_sk_ccmp128 2.993612 2026-09-29 15:56:57.030180 passed 0 test case(s) skipped 0 test case(s) failed tests: nan_dp_sk_ccmp128 2026-09-29 15:56:57 ./run-tests.py nan_usd_publish_multi_chan_solicited DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START nan_usd_publish_multi_chan_solicited 1/1 Test: NAN USD Publish - multi channel - solicited PASS nan_usd_publish_multi_chan_solicited 10.065615 2026-09-29 15:57:07.406890 passed all 1 test case(s) 2026-09-29 15:57:07 ./run-tests.py owe_group_negotiation_connect_cmd DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START owe_group_negotiation_connect_cmd 1/1 Test: Opportunistic Wireless Encryption and group negotiation (connect command) Starting AP wlan3 Connect STA wlan5 to AP PASS owe_group_negotiation_connect_cmd 4.301667 2026-09-29 15:57:12.017248 passed all 1 test case(s) 2026-09-29 15:57:12 ./run-tests.py owe_transition_mode_roam DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START owe_transition_mode_roam 1/1 Test: Opportunistic Wireless Encryption transition mode roaming Starting AP wlan3 Starting AP wlan4 Connect STA wlan0 to AP Starting AP wlan7 Roam from transition mode OWE AP to OWE only AP Roam from OWE only AP to transition mode OWE AP PASS owe_transition_mode_roam 1.866219 2026-09-29 15:57:14.204353 passed all 1 test case(s) 2026-09-29 15:57:14 ./run-tests.py p2p_autogo_pref_chan_disallowed DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START p2p_autogo_pref_chan_disallowed 1/1 Test: P2P channel selection: GO preferred channels are disallowed Start autonomous GO wlan0 Start autonomous GO wlan0 Start autonomous GO wlan0 Start autonomous GO wlan0 Start autonomous GO wlan0 PASS p2p_autogo_pref_chan_disallowed 0.772302 2026-09-29 15:57:15.291744 passed all 1 test case(s) 2026-09-29 15:57:15 ./run-tests.py p2p_device_grpform2 DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START p2p_device_grpform2 1/1 Test: P2P group formation with driver using cfg80211 P2P Device (reverse) Start GO negotiation wlan7 -> wlan0 wlan0: Trying to discover peer 42:00:00:00:14:00 wlan7: Trying to discover peer 02:00:00:00:00:00 Group formed PASS p2p_device_grpform2 1.635662 2026-09-29 15:57:17.247792 passed all 1 test case(s) 2026-09-29 15:57:17 ./run-tests.py p2ps_connect_p2p_device_no_group_iface DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START p2ps_connect_p2p_device_no_group_iface 1/1 Test: P2PS connection using cfg80211 P2P Device (no separate group interface) PASS p2ps_connect_p2p_device_no_group_iface 1.469959 2026-09-29 15:57:19.029589 passed all 1 test case(s) 2026-09-29 15:57:19 ./run-tests.py p2ps_feature_capability_mac_udp_nonautoaccept DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START p2ps_feature_capability_mac_udp_nonautoaccept 1/1 Test: P2PS PD Feature Capability CPT: advertiser MAC:UDP, seeker UDP:MAC, nonautoaccept PASS p2ps_feature_capability_mac_udp_nonautoaccept 0.98149 2026-09-29 15:57:20.326540 passed all 1 test case(s) 2026-09-29 15:57:20 ./run-tests.py p2ps_feature_capability_udp_mac_autoaccept DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START p2ps_feature_capability_udp_mac_autoaccept 1/1 Test: P2PS PD Feature Capability CPT: advertiser UDP:MAC, seeker MAC:UDP, autoaccept PASS p2ps_feature_capability_udp_mac_autoaccept 0.394277 2026-09-29 15:57:21.049655 passed all 1 test case(s) 2026-09-29 15:57:21 ./run-tests.py pasn_fils_sha384_kdk DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START pasn_fils_sha384_kdk 1/1 Test: Station authentication with FILS-SHA384 with KDK derivation during connection Starting AP as-erp Starting AP wlan3 Connect STA wlan0 to AP sta: TK: f3d904a4909b2dc7e44eb24869f2ca43 KDK: fc0dbd0644e67fbdf533f15552cb76f7fc4ae8e525893fd869e42853d295a495 ap : TK: f3d904a4909b2dc7e44eb24869f2ca43 KDK: fc0dbd0644e67fbdf533f15552cb76f7fc4ae8e525893fd869e42853d295a495 sta: TK: e815bed1f16c20451de33e01273ac927 KDK: 2c5b99bb98a30abe72d2d10cc6aee3c330626cf4bbf886ecf9d8bd3bea73a0c5 ap : TK: e815bed1f16c20451de33e01273ac927 KDK: 2c5b99bb98a30abe72d2d10cc6aee3c330626cf4bbf886ecf9d8bd3bea73a0c5 PASS pasn_fils_sha384_kdk 0.859495 2026-09-29 15:57:22.226957 passed all 1 test case(s) 2026-09-29 15:57:22 ./run-tests.py pasn_fils_sha384_pmksa_cache DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START pasn_fils_sha384_pmksa_cache 1/1 Test: PASN authentication with FILS-SHA384 with PMKSA caching Starting AP as-erp Starting AP wlan3 Connect STA wlan0 to AP sta: TK: e3355af2e8ad1b6c0a0df6b150a38f8f KDK: ap : TK: e3355af2e8ad1b6c0a0df6b150a38f8f KDK: PASS pasn_fils_sha384_pmksa_cache 1.277815 2026-09-29 15:57:23.833830 passed all 1 test case(s) 2026-09-29 15:57:23 ./run-tests.py pasn_owe_kdk_secure_ltf DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START pasn_owe_kdk_secure_ltf 1/1 Test: Station authentication with OWE AP with KDK derivation during connection based on Secure LTF support Starting AP wlan3 Connect STA wlan5 to AP sta: TK: 4203dd502a16fb4b9e435eadce3ce7b3 KDK: 2752b15e511d0e9ac86d5628fa7962a1ba67bb789ac339eec1923d22bf2317be ap : TK: 4203dd502a16fb4b9e435eadce3ce7b3 KDK: 2752b15e511d0e9ac86d5628fa7962a1ba67bb789ac339eec1923d22bf2317be PASS pasn_owe_kdk_secure_ltf 0.5931 2026-09-29 15:57:24.739967 passed all 1 test case(s) 2026-09-29 15:57:24 ./run-tests.py persistent_group2 DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START persistent_group2 1/1 Test: P2P persistent group formation with reverse roles Form a persistent group Start GO negotiation wlan1 -> wlan0 wlan0: Trying to discover peer 02:00:00:00:01:00 wlan1: Trying to discover peer 02:00:00:00:00:00 Group formed Terminate persistent group Re-invoke persistent group from client wlan1: Trying to discover peer 02:00:00:00:00:00 Terminate persistent group Re-invoke persistent group from GO wlan0: Trying to discover peer 02:00:00:00:01:00 Terminate persistent group PASS persistent_group2 3.136785 2026-09-29 15:57:28.190029 passed all 1 test case(s) 2026-09-29 15:57:28 ./run-tests.py prefer_ht20_during_roam DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START prefer_ht20_during_roam 1/1 Test: Preference on HT20 over no-HT in roaming consideration Starting AP wlan3 Connect STA wlan0 to AP Starting AP wlan4 PASS prefer_ht20_during_roam 0.562754 2026-09-29 15:57:29.082349 passed all 1 test case(s) 2026-09-29 15:57:29 ./run-tests.py prefer_vht40 DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START prefer_vht40 1/1 Test: Preference on VHT40 over HT40 Starting AP wlan3 Country code at the end: 00 Exception during test execution: AP startup failed Traceback (most recent call last): File "/lkp/benchmarks/hwsim/tests/hwsim/./run-tests.py", line 635, in main t(dev, apdev) ~^^^^^^^^^^^^ File "/lkp/benchmarks/hwsim/tests/hwsim/test_ap_vht.py", line 1097, in test_prefer_vht40 hapd = hostapd.add_ap(apdev[0], params) File "/lkp/benchmarks/hwsim/tests/hwsim/hostapd.py", line 719, in add_ap raise Exception("AP startup failed") Exception: AP startup failed FAIL prefer_vht40 6.075403 2026-09-29 15:57:35.477356 passed 0 test case(s) skipped 0 test case(s) failed tests: prefer_vht40 2026-09-29 15:57:35 ./run-tests.py radius_acct_ipaddr DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START radius_acct_ipaddr 1/1 Test: RADIUS Accounting and Framed-IP-Address Starting AP wlan3 Connect STA wlan0 to AP PASS radius_acct_ipaddr 0.544632 2026-09-29 15:57:36.338392 passed all 1 test case(s) 2026-09-29 15:57:36 ./run-tests.py rrm_beacon_req_active_ap_channel_oom DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START rrm_beacon_req_active_ap_channel_oom 1/1 Test: Beacon request - AP Channel Report subelement and OOM Starting AP wlan3 Starting AP wlan4 Connect STA wlan0 to AP PASS rrm_beacon_req_active_ap_channel_oom 0.36192 2026-09-29 15:57:37.023085 passed all 1 test case(s) 2026-09-29 15:57:37 ./run-tests.py rrm_ftm_range_req_failure DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START rrm_ftm_range_req_failure 1/1 Test: hostapd FTM range request failure Starting AP wlan3 Connect STA wlan1 to AP PASS rrm_ftm_range_req_failure 0.277595 2026-09-29 15:57:37.617172 passed all 1 test case(s) 2026-09-29 15:57:37 ./run-tests.py rsn_override_four_layer_coexistence DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START rsn_override_four_layer_coexistence 1/1 Test: Four STAs simultaneously - base AKM (WPA-PSK), RSN Override 1 (SAE), RSN Override 2 (OWE), and Security Profile 9 (SAE-EXT-KEY) - each using a different security layer on the same AP. Starting AP wlan3 Connect STA wlan0 to AP Connect STA wlan1 to AP Connect STA wlan2 to AP Connect STA wlan5 to AP PASS rsn_override_four_layer_coexistence 1.829883 2026-09-29 15:57:39.786275 passed all 1 test case(s) 2026-09-29 15:57:39 ./run-tests.py rsn_override_mld_mixed DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START rsn_override_mld_mixed 1/1 Test: AP MLD and RSNE=WPA2-Personal/PMF-disabled override=WPA3-Personal/PMF-required on one link Adding link on: ifname=wlan7 Adding link on: ifname=wlan7 Connect STA wlan8 to AP hostapd STATUS: {'state': 'ENABLED', 'phy': 'phy22', 'freq': '2412', 'num_sta_non_erp': '0', 'num_sta_no_short_slot_time': '0', 'num_sta_no_short_preamble': '0', 'olbc': '0', 'num_sta_ht_no_gf': '0', 'num_sta_no_ht': '0', 'num_sta_ht_20_mhz': '0', 'num_sta_ht40_intolerant': '0', 'olbc_ht': '0', 'ht_op_mode': '0x0', 'hw_mode': 'g', 'cac_time_seconds': '0', 'cac_time_left_seconds': 'N/A', 'channel': '1', 'edmg_enable': '0', 'edmg_channel': '0', 'secondary_channel': '0', 'ieee80211n': '1', 'ieee80211ac': '0', 'ieee80211ax': '1', 'ieee80211be': '1', 'ieee80211bn': '0', 'beacon_int': '100', 'dtim_period': '2', 'eht_oper_chwidth': '0', 'eht_oper_centr_freq_seg0_idx': '0', 'num_links': '2', 'link_id': '0', 'link_addr': '02:00:00:5f:3e:79', 'partner_link[1]': '02:00:00:be:1c:a7', 'ap_mld_type': 'STR', 'he_oper_chwidth': '0', 'he_oper_centr_freq_seg0_idx': '0', 'he_oper_centr_freq_seg1_idx': '0', 'ht_caps_info': '000c', 'ht_mcs_bitmask': 'ffff0000000000000000', 'supported_rates': '02 04 0b 16 0c 12 18 24 30 48 60 6c', 'max_txpower': '20', 'bss[0]': 'wlan7', 'bssid[0]': '02:00:00:5f:3e:79', 'ssid[0]': 'AP MLD RSN override', 'num_sta[0]': '1', 'mld_addr[0]': '02:00:00:00:16:00', 'mld_id[0]': '0', 'mld_link_id[0]': '0'} hostapd STA: {'addr': '02:00:00:00:17:00', 'flags': '[AUTH][ASSOC][AUTHORIZED][SHORT_PREAMBLE][WMM][MFP][HT][HE][EHT]', 'aid': '1', 'capability': '0x430', 'listen_interval': '5', 'supported_rates': '02 04 0b 16 0c 12 18 24 30 48 60 6c', 'timeout_next': 'NULLFUNC POLL', 'auth_alg': '3', 'dot11RSNAStatsSTAAddress': '02:00:00:00:17:00', 'dot11RSNAStatsVersion': '1', 'dot11RSNAStatsSelectedPairwiseCipher': '00-0f-ac-9', 'dot11RSNAStatsTKIPLocalMICFailures': '0', 'dot11RSNAStatsTKIPRemoteMICFailures': '0', 'wpa': '2', 'AKMSuiteSelector': '00-0f-ac-24', 'hostapdWPAPTKState': '11', 'hostapdWPAPTKGroupState': '0', 'hostapdMFPR': '1', 'rx_packets': '7', 'tx_packets': '5', 'rx_bytes': '777', 'tx_bytes': '1331', 'inactive_msec': '4', 'signal': '-50', 'rx_rate_info': '10', 'tx_rate_info': '0', 'ht_mcs_bitmask': 'ffff0000000000000000', 'connected_time': '0', 'sae_group': '19', 'sae_rejected_groups': '', 'supp_op_classes': '5151525354737475767778797a7b7c7d7e7f8081008280', 'he_capab': '0178c81a400002bfce0000000000000000fafffaff', 'eht_capab': '07007c0000feffff0f01008888880000', 'ht_caps_info': '0x13fe', 'ext_capab': '04004a02014000400001', 'peer_addr[0]': '9a:9c:16:28:2a:86', 'peer_addr[1]': '26:f4:a5:63:11:76', 'max_simul_links': '0'} valid_links=0x3 active_links=0x3 station status: {'bssid': '02:00:00:00:16:00', 'freq': '2412', 'ssid': 'AP MLD RSN override', 'id': '0', 'mode': 'station', 'wifi_generation': '7', 'max_nss_rx': '2', 'max_nss_tx': '2', 'channel_width': '20', 'pairwise_cipher': 'GCMP-256', 'group_cipher': 'CCMP', 'key_mgmt': 'SAE-EXT-KEY', 'pmf': '2', 'mgmt_group_cipher': 'BIP', 'pmk_len': '32', 'ptk_len': '64', 'kck_len': '16', 'kek_len': '16', 'tk_len': '32', 'mic_len': '16', 'sae_group': '19', 'sae_h2e': '1', 'sae_pk': '0', 'wpa_state': 'COMPLETED', 'p2p_device_address': '02:00:00:00:17:00', 'address': '02:00:00:00:17:00', 'ap_mld_addr': '02:00:00:00:16:00', 'uuid': '9bbe352f-9c25-5694-834e-aeb3e6d47650', 'bss_max_idle_period': '292', 'ssid_verified': '1', 'bigtk_set': '1'} Connect STA wlan0 to AP PASS rsn_override_mld_mixed 1.626371 2026-09-29 15:57:41.735971 passed all 1 test case(s) 2026-09-29 15:57:41 ./run-tests.py sae_bignum_failure_unsafe_group DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START sae_bignum_failure_unsafe_group 1/1 Test: SAE and bignum failure unsafe group Starting AP wlan3 Connect STA wlan0 to AP Connect STA wlan0 to AP Connect STA wlan0 to AP PASS sae_bignum_failure_unsafe_group 0.288046 2026-09-29 15:57:42.350677 passed all 1 test case(s) 2026-09-29 15:57:42 ./run-tests.py sae_commit_invalid_scalar_element_sta DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START sae_commit_invalid_scalar_element_sta 1/1 Test: SAE commit invalid scalar/element from STA Starting AP wlan3 Connect STA wlan0 to AP PASS sae_commit_invalid_scalar_element_sta 1.142502 2026-09-29 15:57:43.807446 passed all 1 test case(s) 2026-09-29 15:57:43 ./run-tests.py sae_h2e_rsnxe_mismatch_assoc DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START sae_h2e_rsnxe_mismatch_assoc 1/1 Test: SAE H2E and RSNXE mismatch in EAPOL-Key msg 2/4 (assoc) Starting AP wlan3 Connect STA wlan0 to AP Connect STA wlan0 to AP Connect STA wlan0 to AP PASS sae_h2e_rsnxe_mismatch_assoc 0.488853 2026-09-29 15:57:44.621272 passed all 1 test case(s) 2026-09-29 15:57:44 ./run-tests.py sae_password_multiple_vlan DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START sae_password_multiple_vlan 1/1 Test: SAE with multiple default password entries and VLANs Starting AP wlan3 Connect STA wlan0 to AP Connect STA wlan1 to AP Connect STA wlan2 to AP Removing BSS wlan3 Starting AP wlan3 PASS sae_password_multiple_vlan 6.159139 2026-09-29 15:57:51.092865 passed all 1 test case(s) 2026-09-29 15:57:51 ./run-tests.py sae_pk_group_19_sae_group_20 DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START sae_pk_group_19_sae_group_20 1/1 Test: SAE-PK with group 19 with SAE group 20 Starting AP wlan3 Connect STA wlan0 to AP PASS sae_pk_group_19_sae_group_20 0.684786 2026-09-29 15:57:52.098461 passed all 1 test case(s) 2026-09-29 15:57:52 ./run-tests.py sae_pwe_group_22 DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START sae_pwe_group_22 1/1 Test: SAE PWE derivation options with group 22 Starting AP wlan3 Connect STA wlan0 to AP Connect STA wlan0 to AP Connect STA wlan0 to AP PASS sae_pwe_group_22 0.702382 2026-09-29 15:57:53.123703 passed all 1 test case(s) 2026-09-29 15:57:53 ./run-tests.py scan_fail_type_only DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START scan_fail_type_only 1/1 Test: Scan failures for TYPE=ONLY Starting AP wlan3 Connect STA wlan0 to AP PASS scan_fail_type_only 0.314085 2026-09-29 15:57:53.754406 passed all 1 test case(s) 2026-09-29 15:57:53 ./run-tests.py scan_for_auth DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START scan_for_auth 1/1 Test: cfg80211 workaround with scan-for-auth Starting AP wlan3 Connect STA wlan0 to AP PASS scan_for_auth 0.442893 2026-09-29 15:57:54.525253 passed all 1 test case(s) 2026-09-29 15:57:54 ./run-tests.py scan_only_one DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START scan_only_one 1/1 Test: Test that scanning with a single active AP only returns that one Starting AP wlan3 PASS scan_only_one 4.063202 2026-09-29 15:57:58.910503 passed all 1 test case(s) 2026-09-29 15:57:58 ./run-tests.py scan_parsing DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START scan_parsing 1/1 Test: Scan result parsing SCAN_RESULTS: bssid / frequency / signal level / flags / ssid 02:ff:00:00:00:02 1234 10 [WEP] test 02:ff:00:00:00:03 0 0 02:ff:00:00:00:04 0 0 02:ff:00:00:00:05 58320 0 [DMG] dmg 02:ff:00:00:00:06 60480 0 [DMG][IBSS] dmg 02:ff:00:00:00:07 62640 0 [DMG][PBSS] dmg 02:ff:00:00:00:08 64800 0 [DMG][ESS] dmg 02:ff:00:00:00:09 2412 1 [WEP][ESS] upd 02:ff:00:00:00:00 0 0 BSS output: id=111 bssid=02:ff:00:00:00:02 freq=1234 beacon_int=102 capabilities=0x1234 qual=10 noise=10 level=10 tsf=1234605616436508552 age=0 ie=000474657374 flags=[WEP] ssid=test snr=10 est_throughput=100 update_idx=178 beacon_ie=000474657374 BSS output: id=112 bssid=02:ff:00:00:00:03 freq=0 beacon_int=0 capabilities=0x0000 qual=0 noise=0 level=0 tsf=0000000000000000 age=0 ie=0000 flags= ssid= snr=0 est_throughput=0 update_idx=178 beacon_ie=0003ffff BSS output: id=113 bssid=02:ff:00:00:00:04 freq=0 beacon_int=0 capabilities=0x0000 qual=0 noise=0 level=0 tsf=0000000000000000 age=0 ie=00000101 flags= ssid= snr=0 est_throughput=0 update_idx=178 beacon_ie=0000 BSS output: id=114 bssid=02:ff:00:00:00:05 freq=58320 beacon_int=0 capabilities=0x0000 qual=0 noise=0 level=0 tsf=0000000000000000 age=0 ie=0003646d67 flags=[DMG] ssid=dmg snr=0 est_throughput=0 update_idx=178 BSS output: id=115 bssid=02:ff:00:00:00:06 freq=60480 beacon_int=0 capabilities=0x0001 qual=0 noise=0 level=0 tsf=0000000000000000 age=0 ie=0003646d67 flags=[DMG][IBSS] ssid=dmg snr=0 est_throughput=0 update_idx=178 BSS output: id=116 bssid=02:ff:00:00:00:07 freq=62640 beacon_int=0 capabilities=0x0002 qual=0 noise=0 level=0 tsf=0000000000000000 age=0 ie=0003646d67 flags=[DMG][PBSS] ssid=dmg snr=0 est_throughput=0 update_idx=178 BSS output: id=117 bssid=02:ff:00:00:00:08 freq=64800 beacon_int=0 capabilities=0x0003 qual=0 noise=0 level=0 tsf=0000000000000000 age=0 ie=0003646d67 flags=[DMG][ESS] ssid=dmg snr=0 est_throughput=0 update_idx=178 BSS output: id=118 bssid=02:ff:00:00:00:09 freq=2412 beacon_int=0 capabilities=0x0011 qual=0 noise=0 level=1 tsf=0000000000000000 age=0 ie=0003757064010182 flags=[WEP][ESS] ssid=upd snr=0 est_throughput=0 update_idx=178 BSS output: id=119 bssid=02:ff:00:00:00:00 freq=0 beacon_int=0 capabilities=0x0000 qual=0 noise=0 level=0 tsf=0000000000000000 age=0 ie=0000 flags= ssid= snr=0 est_throughput=0 update_idx=178 Discovered BSSs: ['02:ff:00:00:00:02', '02:ff:00:00:00:03', '02:ff:00:00:00:04', '02:ff:00:00:00:05', '02:ff:00:00:00:06', '02:ff:00:00:00:07', '02:ff:00:00:00:08', '02:ff:00:00:00:09', '02:ff:00:00:00:00'] Update BSS parameters Updated BSS: id=118 bssid=02:ff:00:00:00:09 freq=2412 beacon_int=0 capabilities=0x0002 qual=0 noise=0 level=2 tsf=0000000000000000 age=0 ie=000375706401028204 flags=[IBSS] ssid=upd snr=0 est_throughput=0 update_idx=179 PASS scan_parsing 0.072694 2026-09-29 15:57:59.299873 passed all 1 test case(s) 2026-09-29 15:57:59 ./run-tests.py scan_reqs_with_non_scan_radio_work DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START scan_reqs_with_non_scan_radio_work 1/1 Test: SCAN commands while non-scan radio_work is in progress PASS scan_reqs_with_non_scan_radio_work 3.977904 2026-09-29 15:58:03.600207 passed all 1 test case(s) 2026-09-29 15:58:03 ./run-tests.py security_profile_sta_proto_valid_sae DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START security_profile_sta_proto_valid_sae 1/1 Test: Security profile protocol testing - STA with valid AP elements (SAE) Starting AP wlan3 Connect STA wlan0 to AP Starting AP wlan3 Connect STA wlan0 to AP Starting AP wlan3 Connect STA wlan0 to AP Starting AP wlan3 Connect STA wlan0 to AP PASS security_profile_sta_proto_valid_sae 1.895243 2026-09-29 15:58:05.807733 passed all 1 test case(s) 2026-09-29 15:58:05 ./run-tests.py sigma_dut_ap_dpp_self_config DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START sigma_dut_ap_dpp_self_config 1/1 Test: sigma_dut DPP AP Configurator using self-configuration Skip test case: sigma_dut not available SKIP sigma_dut_ap_dpp_self_config 0.174509 2026-09-29 15:58:06.306480 passed all 0 test case(s) skipped 1 test case(s) 2026-09-29 15:58:06 ./run-tests.py sigma_dut_dpp_qr_init_configurator_nak_from_uri DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START sigma_dut_dpp_qr_init_configurator_nak_from_uri 1/1 Test: sigma_dut DPP/QR initiator as Configurator (NAK from URI) Skip test case: sigma_dut not available SKIP sigma_dut_dpp_qr_init_configurator_nak_from_uri 0.058658 2026-09-29 15:58:06.683101 passed all 0 test case(s) skipped 1 test case(s) 2026-09-29 15:58:06 ./run-tests.py sigma_dut_dpp_qr_init_enrollee_configurator DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START sigma_dut_dpp_qr_init_enrollee_configurator 1/1 Test: sigma_dut DPP/QR initiator as Enrollee (to become Configurator) Skip test case: sigma_dut not available SKIP sigma_dut_dpp_qr_init_enrollee_configurator 0.056625 2026-09-29 15:58:07.057792 passed all 0 test case(s) skipped 1 test case(s) 2026-09-29 15:58:07 ./run-tests.py sta_dynamic_down_up DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START sta_dynamic_down_up 1/1 Test: Dynamically added wpa_supplicant interface down/up Starting AP wlan3 Create a dynamic wpa_supplicant interface and connect Connect STA wlan5 to AP PASS sta_dynamic_down_up 1.021992 2026-09-29 15:58:08.393965 passed all 1 test case(s) 2026-09-29 15:58:08 ./run-tests.py wnm_bss_group_rekey DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START wnm_bss_group_rekey 1/1 Test: WNM BSS max idle period and group rekey Starting AP wlan3 Connect STA wlan0 to AP PASS wnm_bss_group_rekey 7.766762 2026-09-29 15:58:16.486425 passed all 1 test case(s) 2026-09-29 15:58:16 ./run-tests.py wnm_bss_transition_mgmt_query_mbo DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START wnm_bss_transition_mgmt_query_mbo 1/1 Test: WNM BSS Transition Management query - TM only due to MBO on AP Starting AP wlan3 Connect STA wlan0 to AP PASS wnm_bss_transition_mgmt_query_mbo 0.304408 2026-09-29 15:58:17.104394 passed all 1 test case(s) 2026-09-29 15:58:17 ./run-tests.py wpa2_ocv_5ghz DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START wpa2_ocv_5ghz 1/1 Test: OCV on 5 GHz Starting AP wlan3 Exception during test execution: AP startup failed Traceback (most recent call last): File "/lkp/benchmarks/hwsim/tests/hwsim/./run-tests.py", line 635, in main t(dev, apdev) ~^^^^^^^^^^^^ File "/lkp/benchmarks/hwsim/tests/hwsim/test_ocv.py", line 86, in test_wpa2_ocv_5ghz run_wpa2_ocv_5ghz(dev, apdev) ~~~~~~~~~~~~~~~~~^^^^^^^^^^^^ File "/lkp/benchmarks/hwsim/tests/hwsim/test_ocv.py", line 97, in run_wpa2_ocv_5ghz hapd, ssid, passphrase = ocv_setup_ap(apdev[0], params) ~~~~~~~~~~~~^^^^^^^^^^^^^^^^^^ File "/lkp/benchmarks/hwsim/tests/hwsim/test_ocv.py", line 37, in ocv_setup_ap hapd = hostapd.add_ap(apdev, params) File "/lkp/benchmarks/hwsim/tests/hwsim/hostapd.py", line 719, in add_ap raise Exception("AP startup failed") Exception: AP startup failed FAIL wpa2_ocv_5ghz 5.46246 2026-09-29 15:58:22.896039 passed 0 test case(s) skipped 0 test case(s) failed tests: wpa2_ocv_5ghz 2026-09-29 15:58:22 ./run-tests.py wpa2_ocv_ap_override_eapol_g1_post_enable DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START wpa2_ocv_ap_override_eapol_g1_post_enable 1/1 Test: OCV on 2.4 GHz and AP override EAPOL-Key group msg 1/2 (post enable) Starting AP wlan3 Connect STA wlan0 to AP wlan0: Ignore unexpected status-driver line: ignore_next_local_deauth PASS wpa2_ocv_ap_override_eapol_g1_post_enable 0.434247 2026-09-29 15:58:23.641315 passed all 1 test case(s) 2026-09-29 15:58:23 ./run-tests.py wpas_ap_default_frequency DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START wpas_ap_default_frequency 1/1 Test: wpa_supplicant AP mode - default frequency Connect STA wlan1 to AP PASS wpas_ap_default_frequency 0.33363 2026-09-29 15:58:24.302453 passed all 1 test case(s) 2026-09-29 15:58:24 ./run-tests.py wpas_ap_wps_disabled DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START wpas_ap_wps_disabled 1/1 Test: wpa_supplicant AP mode - WPS disabled Connect STA wlan1 to AP PASS wpas_ap_wps_disabled 0.418155 2026-09-29 15:58:25.052266 passed all 1 test case(s) 2026-09-29 15:58:25 ./run-tests.py wpas_ap_wps_pbc_overlap DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START wpas_ap_wps_pbc_overlap 1/1 Test: wpa_supplicant AP mode - WPS operations with PBC overlap PASS wpas_ap_wps_pbc_overlap 0.477686 2026-09-29 15:58:25.843424 passed all 1 test case(s) 2026-09-29 15:58:25 ./run-tests.py wpas_ctrl_tdls_discover DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START wpas_ctrl_tdls_discover 1/1 Test: wpa_supplicant ctrl_iface tdls_discover PASS wpas_ctrl_tdls_discover 0.057427 2026-09-29 15:58:26.221101 passed all 1 test case(s) 2026-09-29 15:58:26 ./run-tests.py wps_ext_m2_ack_invalid DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START wps_ext_m2_ack_invalid 1/1 Test: WPS proto: M2 followed by invalid ACK Starting AP wlan3 PASS wps_ext_m2_ack_invalid 0.640559 2026-09-29 15:58:27.184508 passed all 1 test case(s) 2026-09-29 15:58:27 ./run-tests.py wps_ext_wsc_done_wrong_msg_type DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START wps_ext_wsc_done_wrong_msg_type 1/1 Test: WPS proto: WSC_Done with wrong Msg Type Starting AP wlan3 PASS wps_ext_wsc_done_wrong_msg_type 0.634499 2026-09-29 15:58:28.137560 passed all 1 test case(s) 2026-09-29 15:58:28 ./stop.sh