2026-09-29 22:21:00 cd /lkp/benchmarks/hwsim/tests/hwsim
group: group-28, test: group-28
2026-09-29 22:21:00 ./build.sh
Building TNC testing tools
Building wlantest
Building hs20-osu-client
Building hostapd
Building wpa_supplicant
2026-09-29 22:21:52 systemctl status dbus.service
○ dbus.service - D-Bus System Message Bus
     Loaded: loaded (/usr/lib/systemd/system/dbus.service; static)
     Active: inactive (dead)
TriggeredBy: ○ dbus.socket
       Docs: man:dbus-daemon(1)
2026-09-29 22:21:52 systemctl restart dbus.service
srw-rw-rw- 1 root root 0 Sep 29 22:21 /run/dbus/system_bus_socket
2026-09-29 22:22:02 ./start.sh
2026-09-29 22:22:03 ./run-tests.py ap_acs_rx_during
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START ap_acs_rx_during 1/1
Test: Automatic channel selection and RX during ACS
Starting AP wlan3
Removing BSS wlan3
Starting AP wlan3
Connect STA wlan0 to AP
Connect STA wlan1 to AP
Connect STA wlan2 to AP
PASS ap_acs_rx_during 3.87747 2026-09-29 22:22:08.303738
passed all 1 test case(s)
2026-09-29 22:22:08 ./run-tests.py ap_airtime_policy_static
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START ap_airtime_policy_static 1/1
Test: Airtime policy - static
Starting AP wlan3
Connect STA wlan0 to AP
Connect STA wlan1 to AP
PASS ap_airtime_policy_static 1.544884 2026-09-29 22:22:10.154951
passed all 1 test case(s)
2026-09-29 22:22:10 ./run-tests.py ap_cipher_replay_protection_sta_tkip
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START ap_cipher_replay_protection_sta_tkip 1/1
Test: TKIP replay protection on STA (TK)
Starting AP wlan3
Connect STA wlan0 to AP
PASS ap_cipher_replay_protection_sta_tkip 2.052835 2026-09-29 22:22:12.504280
passed all 1 test case(s)
2026-09-29 22:22:12 ./run-tests.py ap_cli_order
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START ap_cli_order 1/1
Test: hostapd configuration parameter SET ordering
Starting AP wlan3
Connect STA wlan0 to AP
PASS ap_cli_order 0.436743 2026-09-29 22:22:13.235581
passed all 1 test case(s)
2026-09-29 22:22:13 ./run-tests.py ap_config_reload_file_while_disabled
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START ap_config_reload_file_while_disabled 1/1
Test: hostapd configuration reload from file when disabled
Starting interface wlan3
Connect STA wlan0 to AP
PASS ap_config_reload_file_while_disabled 0.44172 2026-09-29 22:22:13.979725
passed all 1 test case(s)
2026-09-29 22:22:14 ./run-tests.py ap_ft_ap_oom6
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START ap_ft_ap_oom6 1/1
Test: WPA2-PSK-FT and AP OOM 6
Starting AP wlan3
Connect STA wlan0 to AP
Connect STA wlan0 to AP
Connect STA wlan0 to AP
PASS ap_ft_ap_oom6 3.796993 2026-09-29 22:22:18.072142
passed all 1 test case(s)
2026-09-29 22:22:18 ./run-tests.py ap_ft_oom
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START ap_ft_oom 1/1
Test: WPA2-PSK-FT and OOM
Starting AP wlan3
Starting AP wlan4
Connect STA wlan0 to AP
PASS ap_ft_oom 1.212496 2026-09-29 22:22:19.583322
passed all 1 test case(s)
2026-09-29 22:22:19 ./run-tests.py ap_hs20_aka_prime
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START ap_hs20_aka_prime 1/1
Test: Hotspot 2.0 with simulated USIM and EAP-AKA'
Starting AP wlan3
PASS ap_hs20_aka_prime 0.444117 2026-09-29 22:22:20.326263
passed all 1 test case(s)
2026-09-29 22:22:20 ./run-tests.py ap_hs20_cred_with_nai_realm
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START ap_hs20_cred_with_nai_realm 1/1
Test: Hotspot 2.0 network selection and cred_with_nai_realm cred->realm
Starting AP wlan3
PASS ap_hs20_cred_with_nai_realm 0.354924 2026-09-29 22:22:20.982877
passed all 1 test case(s)
2026-09-29 22:22:21 ./run-tests.py ap_hs20_domain_suffix_match
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START ap_hs20_domain_suffix_match 1/1
Test: Hotspot 2.0 and domain_suffix_match
Starting AP wlan3
PASS ap_hs20_domain_suffix_match 0.523951 2026-09-29 22:22:21.810343
passed all 1 test case(s)
2026-09-29 22:22:21 ./run-tests.py ap_hs20_multiple_connects
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START ap_hs20_multiple_connects 1/1
Test: Hotspot 2.0 connection through multiple network selections
Starting AP wlan3
Starting Interworking network selection
Starting Interworking network selection
Starting Interworking network selection
PASS ap_hs20_multiple_connects 0.784745 2026-09-29 22:22:22.894585
passed all 1 test case(s)
2026-09-29 22:22:22 ./run-tests.py ap_hs20_release_number_1
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START ap_hs20_release_number_1 1/1
Test: Hotspot 2.0 with AP claiming support for Release 1
Starting AP wlan3
PASS ap_hs20_release_number_1 0.753932 2026-09-29 22:22:23.948746
passed all 1 test case(s)
2026-09-29 22:22:24 ./run-tests.py ap_hs20_session_info
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START ap_hs20_session_info 1/1
Test: Hotspot 2.0 connection and session information from RADIUS
Starting AP wlan3
PASS ap_hs20_session_info 13.39841 2026-09-29 22:22:37.651593
passed all 1 test case(s)
2026-09-29 22:22:37 ./run-tests.py ap_open_drop_duplicate
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START ap_open_drop_duplicate 1/1
Test: AP dropping duplicate management frames
Starting AP wlan3
PASS ap_open_drop_duplicate 0.437084 2026-09-29 22:22:38.391335
passed all 1 test case(s)
2026-09-29 22:22:38 ./run-tests.py ap_open_multicast_to_unicast
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START ap_open_multicast_to_unicast 1/1
Test: Multicast-to-unicast conversion enabled
Starting AP wlan3
Connect STA wlan0 to AP
PASS ap_open_multicast_to_unicast 0.435885 2026-09-29 22:22:39.134651
passed all 1 test case(s)
2026-09-29 22:22:39 ./run-tests.py ap_open_tdls_vht
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START ap_open_tdls_vht 1/1
Test: Open AP and two stations using TDLS
Starting AP wlan3
Exception during test execution: AP startup failed
Traceback (most recent call last):
  File "/lkp/benchmarks/hwsim/tests/hwsim/./run-tests.py", line 635, in main
    t(dev, apdev)
    ~^^^^^^^^^^^^
  File "/lkp/benchmarks/hwsim/tests/hwsim/test_ap_tdls.py", line 408, in test_ap_open_tdls_vht
    hapd = hostapd.add_ap(apdev[0], params)
  File "/lkp/benchmarks/hwsim/tests/hwsim/hostapd.py", line 719, in add_ap
    raise Exception("AP startup failed")
Exception: AP startup failed
FAIL ap_open_tdls_vht 7.060088 2026-09-29 22:22:46.497566
passed 0 test case(s)
skipped 0 test case(s)
failed tests: ap_open_tdls_vht
2026-09-29 22:22:46 ./run-tests.py ap_open_wpas_in_bridge
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START ap_open_wpas_in_bridge 1/1
Test: Open mode AP and wpas interface in a bridge
Starting AP wlan3
Ignore expected interface_add failure due to missing bridge interface: Failed to add a dynamic wpa_supplicant interface
Connect STA wlan5 to AP
PASS ap_open_wpas_in_bridge 1.042022 2026-09-29 22:22:47.838376
passed all 1 test case(s)
2026-09-29 22:22:47 ./run-tests.py ap_pmf_ap_dropping_sa
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START ap_pmf_ap_dropping_sa 1/1
Test: WPA2-PSK PMF AP dropping SA
Starting AP wlan3
Connect STA wlan0 to AP
Exception during test execution: Locally generated disconnection not reported
Traceback (most recent call last):
  File "/lkp/benchmarks/hwsim/tests/hwsim/./run-tests.py", line 635, in main
    t(dev, apdev)
    ~^^^^^^^^^^^^
  File "/lkp/benchmarks/hwsim/tests/hwsim/test_ap_pmf.py", line 440, in test_ap_pmf_ap_dropping_sa
    raise Exception("Locally generated disconnection not reported")
Exception: Locally generated disconnection not reported
FAIL ap_pmf_ap_dropping_sa 6.459052 2026-09-29 22:22:54.598333
passed 0 test case(s)
skipped 0 test case(s)
failed tests: ap_pmf_ap_dropping_sa
2026-09-29 22:22:54 ./run-tests.py ap_pmf_required_sta_no_pmf
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START ap_pmf_required_sta_no_pmf 1/1
Test: WPA2-PSK AP with PMF required and PMF disabled on STA
Starting AP wlan3
Connect STA wlan0 to AP
PASS ap_pmf_required_sta_no_pmf 0.217702 2026-09-29 22:22:55.123598
passed all 1 test case(s)
2026-09-29 22:22:55 ./run-tests.py ap_pmf_sa_query_timeout
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START ap_pmf_sa_query_timeout 1/1
Test: SA Query timeout
Starting AP wlan3
Connect STA wlan0 to AP
PASS ap_pmf_sa_query_timeout 4.386841 2026-09-29 22:22:59.811997
passed all 1 test case(s)
2026-09-29 22:22:59 ./run-tests.py ap_remove_during_ht_coex_scan
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START ap_remove_during_ht_coex_scan 1/1
Test: Remove interface during HT co-ex scan
Starting AP wlan3
Removing BSS wlan3
PASS ap_remove_during_ht_coex_scan 1.518278 2026-09-29 22:23:01.630721
passed all 1 test case(s)
2026-09-29 22:23:01 ./run-tests.py ap_track_taxonomy
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START ap_track_taxonomy 1/1
Test: AP tracking STA taxonomy
Starting AP wlan3
Connect STA wlan0 to AP
Connect STA wlan1 to AP
Connect STA wlan5 to AP
sta0: wifi4|probe:0,1,50,3,45,127,107,255,255,255,221(0050f2,4),221(506f9a,9),114,221(506f9a,16),221(506f9a,22),htcap:13fe,htagg:1b,htmcs:0000ffff,extcap:04004a8201404040000120,wps:_|assoc:0,1,50,45,127,59,221(0050f2,2),htcap:13fe,htagg:1b,htmcs:0000ffff,extcap:04004a82014000400001
sta1: wifi4|probe:0,1,50,3,45,127,114,255,255,255,221(506f9a,22),htcap:13fe,htagg:1b,htmcs:0000ffff,extcap:04004a0201404040000120|assoc:0,1,50,45,127,59,221(0050f2,2),htcap:13fe,htagg:1b,htmcs:0000ffff,extcap:04004a02014000400001
sta: wifi4|probe:0,1,50,3,45,127,255,255,255,221(0050f2,4),221(506f9a,9),114,221(506f9a,22),htcap:13fe,htagg:1b,htmcs:0000ffff,extcap:04004a0201404040000120,wps:track_test|assoc:0,1,50,45,127,59,221(0050f2,2),htcap:13fe,htagg:1b,htmcs:0000ffff,extcap:04004a02014000400001
Connect STA wlan2 to AP
sta2: wifi4|probe:0,1,50,3,45,127,255,255,255,221(0050f2,4),221(506f9a,9),114,221(506f9a,22),htcap:13fe,htagg:1b,htmcs:0000ffff,extcap:04004a0201404040000120,wps:_|assoc:0,1,50,45,127,59,221(0050f2,2),htcap:13fe,htagg:1b,htmcs:0000ffff,extcap:04004a02014000400001
flush_scan_cache: Could not clear all BSS entries. These remain:
bssid / frequency / signal level / flags / ssid
02:00:00:00:03:00	2437	-30	[ESS]	track

flush_scan_cache: Could not clear all BSS entries. These remain:
bssid / frequency / signal level / flags / ssid
02:00:00:00:03:00	2437	-30	[ESS]	track

flush_scan_cache: Could not clear all BSS entries. These remain:
bssid / frequency / signal level / flags / ssid
02:00:00:00:03:00	2437	-30	[ESS]	track

PASS ap_track_taxonomy 7.193769 2026-09-29 22:23:09.122839
passed all 1 test case(s)
2026-09-29 22:23:09 ./run-tests.py ap_vht160_no_dfs_116_plus
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START ap_vht160_no_dfs_116_plus 1/1
Test: VHT with 160 MHz channel width and no DFS (116 plus)
Starting AP wlan3
Country code at the end: 00
Skip test case: ZA regulatory rule did not have DFS requirement removed
SKIP ap_vht160_no_dfs_116_plus 3.022598 2026-09-29 22:23:12.447483
passed all 0 test case(s)
skipped 1 test case(s)
2026-09-29 22:23:12 ./run-tests.py ap_vht80c
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START ap_vht80c 1/1
Test: VHT with 80 MHz channel width (HT40+ channel 44)
Starting AP wlan3
Country code at the end: 00
Exception during test execution: AP startup failed
Traceback (most recent call last):
  File "/lkp/benchmarks/hwsim/tests/hwsim/./run-tests.py", line 635, in main
    t(dev, apdev)
    ~^^^^^^^^^^^^
  File "/lkp/benchmarks/hwsim/tests/hwsim/test_ap_vht.py", line 162, in test_ap_vht80c
    vht80_test(apdev[0], dev, 44, "[HT40+]")
    ~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  File "/lkp/benchmarks/hwsim/tests/hwsim/test_ap_vht.py", line 142, in vht80_test
    hapd = hostapd.add_ap(apdev, params)
  File "/lkp/benchmarks/hwsim/tests/hwsim/hostapd.py", line 719, in add_ap
    raise Exception("AP startup failed")
Exception: AP startup failed
FAIL ap_vht80c 6.100886 2026-09-29 22:23:18.848351
passed 0 test case(s)
skipped 0 test case(s)
failed tests: ap_vht80c
2026-09-29 22:23:18 ./run-tests.py ap_vht_csa_vht40
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START ap_vht_csa_vht40 1/1
Test: VHT CSA with VHT40 getting enabled
Starting AP wlan3
Country code at the end: 00
Exception during test execution: AP startup failed
Traceback (most recent call last):
  File "/lkp/benchmarks/hwsim/tests/hwsim/./run-tests.py", line 635, in main
    t(dev, apdev)
    ~^^^^^^^^^^^^
  File "/lkp/benchmarks/hwsim/tests/hwsim/test_ap_vht.py", line 886, in test_ap_vht_csa_vht40
    hapd = hostapd.add_ap(apdev[0], params)
  File "/lkp/benchmarks/hwsim/tests/hwsim/hostapd.py", line 719, in add_ap
    raise Exception("AP startup failed")
Exception: AP startup failed
FAIL ap_vht_csa_vht40 6.663273 2026-09-29 22:23:25.812191
passed 0 test case(s)
skipped 0 test case(s)
failed tests: ap_vht_csa_vht40
2026-09-29 22:23:25 ./run-tests.py ap_vht_on_24ghz
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START ap_vht_on_24ghz 1/1
Test: Subset of VHT features on 2.4 GHz
Starting AP wlan3
Connect STA wlan0 to AP
Connect STA wlan1 to AP
PASS ap_vht_on_24ghz 0.567448 2026-09-29 22:23:26.677247
passed all 1 test case(s)
2026-09-29 22:23:26 ./run-tests.py ap_wpa2_eap_reauth_ptk_rekey_blocked_ap
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START ap_wpa2_eap_reauth_ptk_rekey_blocked_ap 1/1
Test: WPA2-Enterprise and Authenticator forcing reauthentication with PTK rekey blocked on AP
Starting AP wlan3
Connect STA wlan0 to AP
Wait for disconnect due to reauth
PASS ap_wpa2_eap_reauth_ptk_rekey_blocked_ap 2.401783 2026-09-29 22:23:29.387817
passed all 1 test case(s)
2026-09-29 22:23:29 ./run-tests.py ap_wpa2_eap_tls_neg_altsubject_match
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START ap_wpa2_eap_tls_neg_altsubject_match 1/1
Test: WPA2-Enterprise negative test - altsubject mismatch
Starting AP wlan3
Connect STA wlan0 to AP
Connect STA wlan0 to AP
Connect STA wlan0 to AP
Connect STA wlan0 to AP
PASS ap_wpa2_eap_tls_neg_altsubject_match 0.552566 2026-09-29 22:23:30.243878
passed all 1 test case(s)
2026-09-29 22:23:30 ./run-tests.py ap_wpa2_eap_ttls_ocsp_revoked
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START ap_wpa2_eap_ttls_ocsp_revoked 1/1
Test: WPA2-Enterprise connection using EAP-TTLS and OCSP status revoked
openssl ocsp -index auth_serv/index-revoked.txt -rsigner auth_serv/ocsp-responder.pem -rkey auth_serv/ocsp-responder.key -CA auth_serv/ca.pem -issuer auth_serv/ca.pem -verify_other auth_serv/ca.pem -trust_other -ndays 7 -reqin auth_serv/ocsp-req.der -respout logs/current/ocsp-server-cache-revoked.der
openssl result:


Starting AP wlan3
Connect STA wlan0 to AP
PASS ap_wpa2_eap_ttls_ocsp_revoked 0.30498 2026-09-29 22:23:30.858834
passed all 1 test case(s)
2026-09-29 22:23:30 ./run-tests.py ap_wpa2_gtk_rekey_fail_1_sta
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START ap_wpa2_gtk_rekey_fail_1_sta 1/1
Test: WPA2-PSK AP and GTK rekey failing with one STA
Starting AP wlan3
Connect STA wlan0 to AP
Connect STA wlan1 to AP
Connect STA wlan2 to AP
PASS ap_wpa2_gtk_rekey_fail_1_sta 10.595443 2026-09-29 22:23:41.768160
passed all 1 test case(s)
2026-09-29 22:23:41 ./run-tests.py ap_wpa2_gtk_rekey_failure
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START ap_wpa2_gtk_rekey_failure 1/1
Test: WPA2-PSK AP and GTK rekey failure
Starting AP wlan3
Connect STA wlan0 to AP
PASS ap_wpa2_gtk_rekey_failure 0.340434 2026-09-29 22:23:42.406064
passed all 1 test case(s)
2026-09-29 22:23:42 ./run-tests.py ap_wpa2_igtk_initial_rsc_bip_cmac_256
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START ap_wpa2_igtk_initial_rsc_bip_cmac_256 1/1
Test: Initial management group cipher RSC (BIP-CMAC-256)
Starting AP wlan3
Connect STA wlan0 to AP
PASS ap_wpa2_igtk_initial_rsc_bip_cmac_256 1.394644 2026-09-29 22:23:44.105210
passed all 1 test case(s)
2026-09-29 22:23:44 ./run-tests.py ap_wpa2_psk_ext_key_id_ptk_rekey_ap0
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START ap_wpa2_psk_ext_key_id_ptk_rekey_ap0 1/1
Test: WPA2-PSK AP and PTK rekey by AP (disabled on STA)
Starting AP wlan3
Connect STA wlan0 to AP
PASS ap_wpa2_psk_ext_key_id_ptk_rekey_ap0 2.3546 2026-09-29 22:23:46.756252
passed all 1 test case(s)
2026-09-29 22:23:46 ./run-tests.py ap_wps_er_http_proto_subscribe_failing
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START ap_wps_er_http_proto_subscribe_failing 1/1
Test: WPS ER HTTP protocol testing - SUBSCRIBE failing
HTTP server received: GET /foo.xml HTTP/1.1
HTTP header: Cache-Control: no-cache
HTTP header: Pragma: no-cache
HTTP header: Accept: text/xml, application/xml
HTTP header: User-Agent: wpa_supplicant
HTTP header: Host: 127.0.0.1:12345
HTTP server received: POST /wps_control HTTP/1.1
HTTP header: Host: 127.0.0.1:12345
HTTP header: Content-Type: text/xml; charset="utf-8"
HTTP header: Content-Length: 280
HTTP header: SOAPACTION: "urn:schemas-wifialliance-org:service:WFAWLANConfig:1#GetDeviceInfo"
HTTP server received: SUBSCRIBE /wps_event HTTP/1.1
HTTP header: HOST: 127.0.0.1:12345
HTTP header: CALLBACK: <http://127.0.0.1:49152/event/98819323/1>
HTTP header: NT: upnp:event
HTTP header: TIMEOUT: Second-1800
Event URL: http://127.0.0.1:49152/event/98819323/1
PASS ap_wps_er_http_proto_subscribe_failing 0.061863 2026-09-29 22:23:47.113922
passed all 1 test case(s)
2026-09-29 22:23:47 ./run-tests.py ap_wps_wpa_cli_action
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START ap_wps_wpa_cli_action 1/1
Test: WPS events and wpa_cli action script
Starting AP wlan3
PASS ap_wps_wpa_cli_action 1.541457 2026-09-29 22:23:48.954923
passed all 1 test case(s)
2026-09-29 22:23:49 ./run-tests.py bgscan_simple_driver_conf_failure
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START bgscan_simple_driver_conf_failure 1/1
Test: bgscan_simple driver configuration failure
Starting AP wlan3
Connect STA wlan0 to AP
PASS bgscan_simple_driver_conf_failure 0.283573 2026-09-29 22:23:49.532923
passed all 1 test case(s)
2026-09-29 22:23:49 ./run-tests.py cert_check_v3
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START cert_check_v3 1/1
Test: Basic test with generated X.509v3 server certificate
Starting AP wlan3
Connect STA wlan0 to AP
PASS cert_check_v3 0.378215 2026-09-29 22:23:50.242110
passed all 1 test case(s)
2026-09-29 22:23:50 ./run-tests.py dbus_autoscan_oom
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START dbus_autoscan_oom 1/1
Test: D-Bus Autoscan() OOM
PASS dbus_autoscan_oom 0.061072 2026-09-29 22:23:50.612229
passed all 1 test case(s)
2026-09-29 22:23:50 ./run-tests.py dbus_bss_anqp_properties
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START dbus_bss_anqp_properties 1/1
Test: D-Bus ANQP BSS properties changed
Starting AP wlan3
PASS dbus_bss_anqp_properties 15.188552 2026-09-29 22:24:06.111463
passed all 1 test case(s)
2026-09-29 22:24:06 ./run-tests.py dbus_get_set_wps
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START dbus_get_set_wps 1/1
Test: D-Bus Get/Set for WPS properties
PASS dbus_get_set_wps 1.070832 2026-09-29 22:24:07.476952
passed all 1 test case(s)
2026-09-29 22:24:07 ./run-tests.py dbus_p2p_ip_addr
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START dbus_p2p_ip_addr 1/1
Test: D-Bus P2P and IP address parameters
PASS dbus_p2p_ip_addr 0.854768 2026-09-29 22:24:08.633352
passed all 1 test case(s)
2026-09-29 22:24:08 ./run-tests.py dbus_scan_interval
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START dbus_scan_interval 1/1
Test: D-Bus Get/Set ScanInterval
PASS dbus_scan_interval 0.059582 2026-09-29 22:24:08.999426
passed all 1 test case(s)
2026-09-29 22:24:09 ./run-tests.py dfs_cac_restart_on_enable
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START dfs_cac_restart_on_enable 1/1
Test: DFS CAC interrupted and restarted
Starting AP wlan3 on DFS channel
Starting AP wlan3
Country code at the end: 00
Exception during test execution: Unexpected interface state: DISABLED
Traceback (most recent call last):
  File "/lkp/benchmarks/hwsim/tests/hwsim/./run-tests.py", line 635, in main
    t(dev, apdev)
    ~^^^^^^^^^^^^
  File "/lkp/benchmarks/hwsim/tests/hwsim/test_dfs.py", line 503, in test_dfs_cac_restart_on_enable
    hapd = start_dfs_ap(apdev[0])
  File "/lkp/benchmarks/hwsim/tests/hwsim/test_dfs.py", line 77, in start_dfs_ap
    raise Exception("Unexpected interface state: " + state)
Exception: Unexpected interface state: DISABLED
FAIL dfs_cac_restart_on_enable 5.941298 2026-09-29 22:24:15.249359
passed 0 test case(s)
skipped 0 test case(s)
failed tests: dfs_cac_restart_on_enable
2026-09-29 22:24:15 ./run-tests.py dpp_config_jwk_error_invalid_y
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START dpp_config_jwk_error_invalid_y 1/1
Test: DPP Config Object JWK error - invalid y
dev0 displays QR Code
dev1 scans QR Code and initiates DPP Authentication
PASS dpp_config_jwk_error_invalid_y 0.068189 2026-09-29 22:24:15.621025
passed all 1 test case(s)
2026-09-29 22:24:15 ./run-tests.py dpp_config_jwk_error_no_crv
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START dpp_config_jwk_error_no_crv 1/1
Test: DPP Config Object JWK error - no crv
dev0 displays QR Code
dev1 scans QR Code and initiates DPP Authentication
PASS dpp_config_jwk_error_no_crv 0.067835 2026-09-29 22:24:15.989361
passed all 1 test case(s)
2026-09-29 22:24:16 ./run-tests.py dpp_controller_rx_errors
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START dpp_controller_rx_errors 1/1
Test: DPP Controller RX error cases
PASS dpp_controller_rx_errors 0.062362 2026-09-29 22:24:16.348884
passed all 1 test case(s)
2026-09-29 22:24:16 ./run-tests.py dpp_pkex_p384
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START dpp_pkex_p384 1/1
Test: DPP and PKEX (P-384)
PASS dpp_pkex_p384 0.08191 2026-09-29 22:24:16.733249
passed all 1 test case(s)
2026-09-29 22:24:16 ./run-tests.py dpp_proto_conf_req_invalid_config_attr_obj
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START dpp_proto_conf_req_invalid_config_attr_obj 1/1
Test: DPP protocol testing - invalid Config Attr Obj in Conf Req
PASS dpp_proto_conf_req_invalid_config_attr_obj 0.064332 2026-09-29 22:24:17.106305
passed all 1 test case(s)
2026-09-29 22:24:17 ./run-tests.py dpp_push_button_i_hash_mismatch_ap
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START dpp_push_button_i_hash_mismatch_ap 1/1
Test: DPP push button - Initiator hash mismatch from AP
Starting AP wlan3
PASS dpp_push_button_i_hash_mismatch_ap 19.373631 2026-09-29 22:24:36.782527
passed all 1 test case(s)
2026-09-29 22:24:36 ./run-tests.py dpp_qr_code_auth_incompatible_roles
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START dpp_qr_code_auth_incompatible_roles 1/1
Test: DPP QR Code and authentication exchange (incompatible roles)
dev0 displays QR Code
dev1 scans QR Code
dev1 initiates DPP Authentication
PASS dpp_qr_code_auth_incompatible_roles 0.072637 2026-09-29 22:24:37.154608
passed all 1 test case(s)
2026-09-29 22:24:37 ./run-tests.py dpp_truncated_attr
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START dpp_truncated_attr 1/1
Test: DPP and truncated attribute
PASS dpp_truncated_attr 0.057651 2026-09-29 22:24:37.508774
passed all 1 test case(s)
2026-09-29 22:24:37 ./run-tests.py eap_proto_otp
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START eap_proto_otp 1/1
Test: EAP-OTP protocol tests
Starting AP wlan3
Connect STA wlan0 to AP
otp_handler - RX 02b900090175736572
Test: Empty payload
otp_handler - RX 02ba000d0570617373776f7264
Test: Success
Connect STA wlan0 to AP
otp_handler - RX 024100090175736572
Test: Challenge included
otp_handler - RX 0242000d0570617373776f7264
Test: Success
PASS eap_proto_otp 0.65722 2026-09-29 22:24:38.472123
passed all 1 test case(s)
2026-09-29 22:24:38 ./run-tests.py eht_mld_cohosted_connectivity
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START eht_mld_cohosted_connectivity 1/1
Test: EHT 2 AP MLDs with 2 MLD clients connection
Starting APs
Connect STA wlan8 to AP
hostapd STATUS: {'state': 'ENABLED', 'phy': 'phy7', 'freq': '2412', 'num_sta_non_erp': '0', 'num_sta_no_short_slot_time': '0', 'num_sta_no_short_preamble': '0', 'olbc': '0', 'num_sta_ht_no_gf': '0', 'num_sta_no_ht': '0', 'num_sta_ht_20_mhz': '0', 'num_sta_ht40_intolerant': '0', 'olbc_ht': '0', 'ht_op_mode': '0x0', 'hw_mode': 'g', 'cac_time_seconds': '0', 'cac_time_left_seconds': 'N/A', 'channel': '1', 'edmg_enable': '0', 'edmg_channel': '0', 'secondary_channel': '0', 'ieee80211n': '1', 'ieee80211ac': '0', 'ieee80211ax': '1', 'ieee80211be': '1', 'ieee80211bn': '0', 'beacon_int': '100', 'dtim_period': '2', 'eht_oper_chwidth': '0', 'eht_oper_centr_freq_seg0_idx': '0', 'num_links': '2', 'link_id': '0', 'link_addr': '02:00:00:00:07:01', 'partner_link[1]': '02:00:00:00:08:01', 'ap_mld_type': 'STR', 'he_oper_chwidth': '0', 'he_oper_centr_freq_seg0_idx': '0', 'he_oper_centr_freq_seg1_idx': '0', 'ht_caps_info': '000c', 'ht_mcs_bitmask': 'ffff0000000000000000', 'supported_rates': '02 04 0b 16 0c 12 18 24 30 48 60 6c', 'max_txpower': '20', 'bss[0]': 'wlan7', 'bssid[0]': '02:00:00:00:07:01', 'ssid[0]': 'mld-0', 'num_sta[0]': '1', 'mld_addr[0]': '02:00:00:00:07:00', 'mld_id[0]': '0', 'mld_link_id[0]': '0', 'bss[1]': 'wlan7-1', 'bssid[1]': '02:00:00:00:07:02', 'ssid[1]': 'mld-1', 'num_sta[1]': '0', 'mld_addr[1]': '02:00:00:00:07:02', 'mld_id[1]': '0', 'mld_link_id[1]': '0'}
hostapd STA: {'addr': '02:00:00:00:08:00', 'flags': '[AUTH][ASSOC][AUTHORIZED][SHORT_PREAMBLE][WMM][MFP][HT][HE][EHT]', 'aid': '1', 'capability': '0x430', 'listen_interval': '5', 'supported_rates': '02 04 0b 16 0c 12 18 24 30 48 60 6c', 'timeout_next': 'NULLFUNC POLL', 'auth_alg': '3', 'dot11RSNAStatsSTAAddress': '02:00:00:00:08:00', 'dot11RSNAStatsVersion': '1', 'dot11RSNAStatsSelectedPairwiseCipher': '00-0f-ac-4', 'dot11RSNAStatsTKIPLocalMICFailures': '0', 'dot11RSNAStatsTKIPRemoteMICFailures': '0', 'wpa': '2', 'AKMSuiteSelector': '00-0f-ac-8', 'hostapdWPAPTKState': '11', 'hostapdWPAPTKGroupState': '0', 'hostapdMFPR': '1', 'rx_packets': '7', 'tx_packets': '5', 'rx_bytes': '749', 'tx_bytes': '1214', 'inactive_msec': '3', 'signal': '-50', 'rx_rate_info': '10', 'tx_rate_info': '0', 'ht_mcs_bitmask': 'ffff0000000000000000', 'connected_time': '0', 'sae_group': '19', 'sae_rejected_groups': '', 'supp_op_classes': '5151525354737475767778797a7b7c7d7e7f8081008280', 'he_capab': '0178c81a400002bfce0000000000000000fafffaff', 'eht_capab': '07007c0000feffff0f01008888880000', 'ht_caps_info': '0x13fe', 'ext_capab': '04004a02014000400001', 'peer_addr[0]': '5a:d7:df:18:41:42', 'peer_addr[1]': '76:6c:2a:c5:44:44', 'max_simul_links': '0'}
valid_links=0x3

active_links=0x3

station status: {'bssid': '02:00:00:00:07:00', 'freq': '2412', 'ssid': 'mld-0', 'id': '0', 'mode': 'station', 'wifi_generation': '7', 'max_nss_rx': '2', 'max_nss_tx': '2', 'channel_width': '20', 'pairwise_cipher': 'CCMP', 'group_cipher': 'CCMP', 'key_mgmt': 'SAE', 'pmf': '2', 'mgmt_group_cipher': 'BIP', 'pmk_len': '32', 'ptk_len': '48', 'kck_len': '16', 'kek_len': '16', 'tk_len': '16', 'mic_len': '16', 'sae_group': '19', 'sae_h2e': '1', 'sae_pk': '0', 'wpa_state': 'COMPLETED', 'p2p_device_address': '02:00:00:00:08:00', 'address': '02:00:00:00:08:00', 'ap_mld_addr': '02:00:00:00:07:00', 'uuid': '75a9ac25-8084-5995-9e1a-dd9a7395af8f', 'bss_max_idle_period': '292', 'ssid_verified': '1'}
Connect STA wlan9 to AP
hostapd STATUS: {'state': 'ENABLED', 'phy': 'phy7', 'freq': '2437', 'num_sta_non_erp': '0', 'num_sta_no_short_slot_time': '0', 'num_sta_no_short_preamble': '0', 'olbc': '0', 'num_sta_ht_no_gf': '0', 'num_sta_no_ht': '0', 'num_sta_ht_20_mhz': '0', 'num_sta_ht40_intolerant': '0', 'olbc_ht': '0', 'ht_op_mode': '0x0', 'hw_mode': 'g', 'cac_time_seconds': '0', 'cac_time_left_seconds': 'N/A', 'channel': '6', 'edmg_enable': '0', 'edmg_channel': '0', 'secondary_channel': '0', 'ieee80211n': '1', 'ieee80211ac': '0', 'ieee80211ax': '1', 'ieee80211be': '1', 'ieee80211bn': '0', 'beacon_int': '100', 'dtim_period': '2', 'eht_oper_chwidth': '0', 'eht_oper_centr_freq_seg0_idx': '0', 'num_links': '2', 'link_id': '1', 'link_addr': '02:00:00:00:08:02', 'partner_link[0]': '02:00:00:00:07:02', 'ap_mld_type': 'STR', 'he_oper_chwidth': '0', 'he_oper_centr_freq_seg0_idx': '0', 'he_oper_centr_freq_seg1_idx': '0', 'ht_caps_info': '000c', 'ht_mcs_bitmask': 'ffff0000000000000000', 'supported_rates': '02 04 0b 16 0c 12 18 24 30 48 60 6c', 'max_txpower': '20', 'bss[0]': 'wlan7', 'bssid[0]': '02:00:00:00:08:01', 'ssid[0]': 'mld-0', 'num_sta[0]': '1', 'mld_addr[0]': '02:00:00:00:07:00', 'mld_id[0]': '0', 'mld_link_id[0]': '1', 'bss[1]': 'wlan7-1', 'bssid[1]': '02:00:00:00:08:02', 'ssid[1]': 'mld-1', 'num_sta[1]': '1', 'mld_addr[1]': '02:00:00:00:07:02', 'mld_id[1]': '0', 'mld_link_id[1]': '1'}
hostapd STA: {'addr': '02:00:00:00:09:00', 'flags': '[AUTH][ASSOC][AUTHORIZED][SHORT_PREAMBLE][WMM][MFP][HT][HE][EHT]', 'aid': '1', 'capability': '0x430', 'listen_interval': '5', 'supported_rates': '02 04 0b 16 0c 12 18 24 30 48 60 6c', 'timeout_next': 'NULLFUNC POLL', 'auth_alg': '3', 'dot11RSNAStatsSTAAddress': '02:00:00:00:09:00', 'dot11RSNAStatsVersion': '1', 'dot11RSNAStatsSelectedPairwiseCipher': '00-0f-ac-4', 'dot11RSNAStatsTKIPLocalMICFailures': '0', 'dot11RSNAStatsTKIPRemoteMICFailures': '0', 'wpa': '2', 'AKMSuiteSelector': '00-0f-ac-8', 'hostapdWPAPTKState': '11', 'hostapdWPAPTKGroupState': '0', 'hostapdMFPR': '1', 'rx_packets': '7', 'tx_packets': '5', 'rx_bytes': '749', 'tx_bytes': '1214', 'inactive_msec': '3', 'signal': '-50', 'rx_rate_info': '0', 'tx_rate_info': '0', 'ht_mcs_bitmask': 'ffff0000000000000000', 'connected_time': '0', 'sae_group': '19', 'sae_rejected_groups': '', 'supp_op_classes': '5151525354737475767778797a7b7c7d7e7f8081008280', 'he_capab': '0178c81a400002bfce0000000000000000fafffaff', 'eht_capab': '07007c0000feffff0f01008888880000', 'ht_caps_info': '0x13fe', 'ext_capab': '04004a02014000400001', 'peer_addr[0]': '36:dc:4b:43:d3:af', 'peer_addr[1]': '66:61:0b:53:1d:7b', 'max_simul_links': '0'}
valid_links=0x3

active_links=0x3

station status: {'bssid': '02:00:00:00:07:02', 'freq': '2437', 'ssid': 'mld-1', 'id': '0', 'mode': 'station', 'wifi_generation': '7', 'max_nss_rx': '2', 'max_nss_tx': '2', 'channel_width': '20', 'pairwise_cipher': 'CCMP', 'group_cipher': 'CCMP', 'key_mgmt': 'SAE', 'pmf': '2', 'mgmt_group_cipher': 'BIP', 'pmk_len': '32', 'ptk_len': '48', 'kck_len': '16', 'kek_len': '16', 'tk_len': '16', 'mic_len': '16', 'sae_group': '19', 'sae_h2e': '1', 'sae_pk': '0', 'wpa_state': 'COMPLETED', 'p2p_device_address': '02:00:00:00:08:00', 'address': '02:00:00:00:09:00', 'ap_mld_addr': '02:00:00:00:07:02', 'uuid': '75a9ac25-8084-5995-9e1a-dd9a7395af8f', 'bss_max_idle_period': '292', 'ssid_verified': '1'}
PASS eht_mld_cohosted_connectivity 4.480514 2026-09-29 22:24:43.264619
passed all 1 test case(s)
2026-09-29 22:24:43 ./run-tests.py fils_sk_pmksa_caching_ctrl_ext
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START fils_sk_pmksa_caching_ctrl_ext 1/1
Test: FILS SK and PMKSA caching with Cache Identifier and external management
Starting AP as-erp
Starting AP wlan3
Connect STA wlan0 to AP
PMKSA_GET: 02:00:00:00:03:00 3b390b627c7866019eb9b08c7f6de72c 09761fe2ff5b6785237521e9fad3b442e1970fe28aa3a579f70c1ff65382af065483fa9e2352442a165d736f5be30219 30240 43200 524288 0 ffee

Starting AP wlan4
PASS fils_sk_pmksa_caching_ctrl_ext 0.726682 2026-09-29 22:24:44.301815
passed all 1 test case(s)
2026-09-29 22:24:44 ./run-tests.py fst_sta_connect_to_non_fst_ap
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START fst_sta_connect_to_non_fst_ap 1/1
Test: FST STA connecting to non-FST AP
Starting AP wlan3 (old add_ap argument type)
Exception during test execution: AP startup failed
Traceback (most recent call last):
  File "/lkp/benchmarks/hwsim/tests/hwsim/./run-tests.py", line 633, in main
    t(dev, apdev, params)
    ~^^^^^^^^^^^^^^^^^^^^
  File "/lkp/benchmarks/hwsim/tests/hwsim/test_fst_module.py", line 740, in test_fst_sta_connect_to_non_fst_ap
    ap1, ap2, sta1, sta2 = fst_module_aux.start_two_ap_sta_pairs(apdev)
                           ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^^^^^^^
  File "/lkp/benchmarks/hwsim/tests/hwsim/fst_module_aux.py", line 78, in start_two_ap_sta_pairs
    ap1.start()
    ~~~~~~~~~^^
  File "/lkp/benchmarks/hwsim/tests/hwsim/fst_module_aux.py", line 613, in start
    self.hapd = hostapd.add_ap(self.iface, params)
                ~~~~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^
  File "/lkp/benchmarks/hwsim/tests/hwsim/hostapd.py", line 719, in add_ap
    raise Exception("AP startup failed")
Exception: AP startup failed
FAIL fst_sta_connect_to_non_fst_ap 5.090992 2026-09-29 22:24:49.717341
passed 0 test case(s)
skipped 0 test case(s)
failed tests: fst_sta_connect_to_non_fst_ap
2026-09-29 22:24:49 ./run-tests.py fst_sta_start_session_broadcast_peer_addr
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START fst_sta_start_session_broadcast_peer_addr 1/1
Test: FST STA start session - broadcast peer addr
Starting AP wlan3 (old add_ap argument type)
Exception during test execution: AP startup failed
Traceback (most recent call last):
  File "/lkp/benchmarks/hwsim/tests/hwsim/./run-tests.py", line 633, in main
    t(dev, apdev, params)
    ~^^^^^^^^^^^^^^^^^^^^
  File "/lkp/benchmarks/hwsim/tests/hwsim/test_fst_module.py", line 1609, in test_fst_sta_start_session_broadcast_peer_addr
    fst_start_session(apdev, test_params, bad_param_peer_addr, False,
    ~~~~~~~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
                      'FF:FF:FF:FF:FF:FF')
                      ^^^^^^^^^^^^^^^^^^^^
  File "/lkp/benchmarks/hwsim/tests/hwsim/test_fst_module.py", line 95, in fst_start_session
    ap1, ap2, sta1, sta2 = fst_module_aux.start_two_ap_sta_pairs(apdev)
                           ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^^^^^^^
  File "/lkp/benchmarks/hwsim/tests/hwsim/fst_module_aux.py", line 78, in start_two_ap_sta_pairs
    ap1.start()
    ~~~~~~~~~^^
  File "/lkp/benchmarks/hwsim/tests/hwsim/fst_module_aux.py", line 613, in start
    self.hapd = hostapd.add_ap(self.iface, params)
                ~~~~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^
  File "/lkp/benchmarks/hwsim/tests/hwsim/hostapd.py", line 719, in add_ap
    raise Exception("AP startup failed")
Exception: AP startup failed
FAIL fst_sta_start_session_broadcast_peer_addr 5.079035 2026-09-29 22:24:55.108848
passed 0 test case(s)
skipped 0 test case(s)
failed tests: fst_sta_start_session_broadcast_peer_addr
2026-09-29 22:24:55 ./run-tests.py go_neg_pin_vs_pbc
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START go_neg_pin_vs_pbc 1/1
Test: P2P GO Negotiation with one device using PIN and the other PBC
wlan0: Trying to discover peer 02:00:00:00:01:00
wlan1: Trying to discover peer 02:00:00:00:00:00
PASS go_neg_pin_vs_pbc 0.571146 2026-09-29 22:24:55.986786
passed all 1 test case(s)
2026-09-29 22:24:56 ./run-tests.py grpform_no_5ghz_add_cli4
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START grpform_no_5ghz_add_cli4 1/1
Test: P2P group formation with passive scan 5 GHz and p2p_add_cli_chan=1 (reverse; intent 15)
Start GO negotiation wlan0 -> wlan1
wlan1: Trying to discover peer 02:00:00:00:00:00
wlan0: Trying to discover peer 02:00:00:00:01:00
Group formed
PASS grpform_no_5ghz_add_cli4 1.0784 2026-09-29 22:24:57.369743
passed all 1 test case(s)
2026-09-29 22:24:57 ./run-tests.py he_40
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START he_40 1/1
Test: HE and 40 MHz channel
Starting AP wlan3
Country code at the end: 00
Exception during test execution: AP startup failed
Traceback (most recent call last):
  File "/lkp/benchmarks/hwsim/tests/hwsim/./run-tests.py", line 635, in main
    t(dev, apdev)
    ~^^^^^^^^^^^^
  File "/lkp/benchmarks/hwsim/tests/hwsim/test_he.py", line 484, in test_he_40
    hapd = hostapd.add_ap(ap, params)
  File "/lkp/benchmarks/hwsim/tests/hwsim/hostapd.py", line 719, in add_ap
    raise Exception("AP startup failed")
Exception: AP startup failed
FAIL he_40 5.428235 2026-09-29 22:25:03.120262
passed 0 test case(s)
skipped 0 test case(s)
failed tests: he_40
2026-09-29 22:25:03 ./run-tests.py mbo_supp_oper_classes_jp
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START mbo_supp_oper_classes_jp 1/1
Test: MBO and supported operating classes (JP)
Starting AP wlan3
Starting AP wlan4
Country: JP
Country code at the end (1): 00
Country code at the end (2): 00
Country code at the end (3): 00
Exception during test execution: No regdom change event
Traceback (most recent call last):
  File "/lkp/benchmarks/hwsim/tests/hwsim/./run-tests.py", line 635, in main
    t(dev, apdev)
    ~^^^^^^^^^^^^
  File "/lkp/benchmarks/hwsim/tests/hwsim/test_mbo.py", line 173, in test_mbo_supp_oper_classes_jp
    run_mbo_supp_oper_class(dev, apdev, "JP",
    ~~~~~~~~~~~~~~~~~~~~~~~^^^^^^^^^^^^^^^^^^
                            "51525354737475767778797a7b8081008280",
                            ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
                            True,
                            ^^^^^
                            alt_expected="51525354737475767778797a7b8081838485860082808785")
                            ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  File "/lkp/benchmarks/hwsim/tests/hwsim/test_mbo.py", line 115, in run_mbo_supp_oper_class
    res2, res5 = run_mbo_supp_oper_classes(dev, apdev, hapd, hapd2, country,
                 ~~~~~~~~~~~~~~~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
                                           freq_list=freq_list,
                                           ^^^^^^^^^^^^^^^^^^^^
                                           disable_ht=disable_ht,
                                           ^^^^^^^^^^^^^^^^^^^^^^
                                           disable_vht=disable_vht)
                                           ^^^^^^^^^^^^^^^^^^^^^^^^
  File "/lkp/benchmarks/hwsim/tests/hwsim/test_mbo.py", line 44, in run_mbo_supp_oper_classes
    raise Exception("No regdom change event")
Exception: No regdom change event
FAIL mbo_supp_oper_classes_jp 6.549334 2026-09-29 22:25:09.981743
passed 0 test case(s)
skipped 0 test case(s)
failed tests: mbo_supp_oper_classes_jp
2026-09-29 22:25:10 ./run-tests.py mesh_secure_ccmp_256_cmac_256
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START mesh_secure_ccmp_256_cmac_256 1/1
Test: Secure mesh with CCMP-256 and BIP-CMAC-256
PASS mesh_secure_ccmp_256_cmac_256 0.862679 2026-09-29 22:25:11.161609
passed all 1 test case(s)
2026-09-29 22:25:11 ./run-tests.py nan_config
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START nan_config 1/1
Test: NAN configuration testing
NAN capabilities: USD NAN
NAN device starting on nan0
Setting master_pref to 10 on nan0
Setting dual_band to 0 on nan0
NAN device started on nan0
Setting master_pre to 20 on nan0
Setting cluser_id to 12 on nan0
Setting scan_peod to 30 on nan0
Setting can_dwell_time to 150 on nan0
Setting discovery_beaconl to 1 on nan0
Setting low_band_cfg to -70,-85, on nan0
Setting high_band_cfg to 75,,2 on nan0
Setting master_pref to 20 on nan0
Setting cluster_id to 50:6f:9a:01:01:01 on nan0
Setting scan_period to 30 on nan0
Setting scan_dwell_time to 150 on nan0
Setting discovery_beacon_interval to 100 on nan0
Setting low_band_cfg to -59,-65,1,0 on nan0
Setting high_band_cfg to -59,-65,2,0 on nan0
Updating NAN configuration
Updating NAN configuration on nan0
Setting master_pref to 255 on nan0
Updating NAN configuration on nan0
NAN device stopping on nan0
NAN device stopped on nan0
PASS nan_config 1.306902 2026-09-29 22:25:12.791214
passed all 1 test case(s)
2026-09-29 22:25:12 ./run-tests.py nan_dp_open_2_ndps_security_upgrade
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START nan_dp_open_2_ndps_security_upgrade 1/1
Test: NAN DP - 2 NDPs with same peer, second with security upgrade
NAN capabilities: USD NAN
NAN device starting on nan0
Setting master_pref to 10 on nan0
Setting dual_band to 0 on nan0
NAN device started on nan0
NAN capabilities: USD NAN
NAN device starting on nan1
Setting master_pref to 10 on nan1
Setting dual_band to 0 on nan1
NAN device started on nan1
Publish ID: 1, Subscribe ID: 1
NAN device stopping on nan1
NAN device stopped on nan1
NAN device stopping on nan0
NAN device stopped on nan0
Exception during test execution: Failed to configure schedule (sub)
Traceback (most recent call last):
  File "/lkp/benchmarks/hwsim/tests/hwsim/./run-tests.py", line 633, in main
    t(dev, apdev, params)
    ~^^^^^^^^^^^^^^^^^^^^
  File "/lkp/benchmarks/hwsim/tests/hwsim/test_nan.py", line 1613, in test_nan_dp_open_2_ndps_security_upgrade
    _run_nan_dp_2_ndps(secure_ndp2=True)
    ~~~~~~~~~~~~~~~~~~^^^^^^^^^^^^^^^^^^
  File "/lkp/benchmarks/hwsim/tests/hwsim/test_nan.py", line 1639, in _run_nan_dp_2_ndps
    ndp_id1, init_ndi1 = _nan_ndp_request_and_accept(pub, sub, pid1, sid1,
                         ~~~~~~~~~~~~~~~~~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^^^
                                                     paddr, saddr,
                                                     ^^^^^^^^^^^^^
                                                     req_ssi="aabbcc",
                                                     ^^^^^^^^^^^^^^^^^
                                                     resp_ssi="ddeeff",
                                                     ^^^^^^^^^^^^^^^^^^
                                                     configure_schedule=True)
                                                     ^^^^^^^^^^^^^^^^^^^^^^^^
  File "/lkp/benchmarks/hwsim/tests/hwsim/test_nan.py", line 1359, in _nan_ndp_request_and_accept
    raise Exception("Failed to configure schedule (sub)")
Exception: Failed to configure schedule (sub)
FAIL nan_dp_open_2_ndps_security_upgrade 2.803712 2026-09-29 22:25:15.904655
passed 0 test case(s)
skipped 0 test case(s)
failed tests: nan_dp_open_2_ndps_security_upgrade
2026-09-29 22:25:15 ./run-tests.py nan_pbea_pairing_setup_info_bootstrap_request
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START nan_pbea_pairing_setup_info_bootstrap_request 1/1
Test: NAN PBEA: Pairing Setup Info in NAN-BOOTSTRAP-REQUEST event
NAN capabilities: USD NAN
NAN device starting on nan0
Setting master_pref to 10 on nan0
Setting dual_band to 0 on nan0
NAN device started on nan0
NAN capabilities: USD NAN
NAN device starting on nan1
Setting master_pref to 10 on nan1
Setting dual_band to 0 on nan1
NAN device started on nan1
Bootstrapping NAN with peer 42:00:00:00:0d:00 pbm=64 auth=False on nan1
NAN device stopping on nan1
NAN device stopped on nan1
NAN device stopping on nan0
NAN device stopped on nan0
PASS nan_pbea_pairing_setup_info_bootstrap_request 2.576146 2026-09-29 22:25:18.798912
passed all 1 test case(s)
2026-09-29 22:25:18 ./run-tests.py nan_sae_pairing
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START nan_sae_pairing 1/1
Test: NAN Pairing setup using a password (SAE)
NAN capabilities: USD NAN
NAN device starting on nan0
Setting master_pref to 10 on nan0
Setting dual_band to 0 on nan0
NAN device started on nan0
NAN capabilities: USD NAN
NAN device starting on nan1
Setting master_pref to 10 on nan1
Setting dual_band to 0 on nan1
NAN device started on nan1
Publish ID: 1, Subscribe ID: 1
NAN pairing successful, nd_pmk=93f32a25840a116b0c5cf8c4d7d52f1b21b3a254c0d4b3fdbbbbf7b9d46f7894
Cancelling publish with ID 1 on nan0
Cancelling subscribe with ID 1 on nan1
Publish ID: 2, Subscribe ID: 2
NAN pairing successful, nd_pmk=d5e194935385779cd5a95d962e6a378dcc5303572e400bfc39b50e1e12de43a1
NAN device stopping on nan1
NAN device stopped on nan1
NAN device stopping on nan0
NAN device stopped on nan0
PASS nan_sae_pairing 6.471228 2026-09-29 22:25:25.594139
passed all 1 test case(s)
2026-09-29 22:25:25 ./run-tests.py nan_sync_multi_services_2
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START nan_sync_multi_services_2 1/1
Test: NAN synchronized service discovery with multiple services: passive subscribe
NAN capabilities: USD NAN
NAN device starting on nan0
Setting master_pref to 10 on nan0
Setting dual_band to 0 on nan0
NAN device started on nan0
NAN capabilities: USD NAN
NAN device starting on nan1
Setting master_pref to 10 on nan1
Setting dual_band to 0 on nan1
NAN device started on nan1
NAN device stopping on nan1
NAN device stopped on nan1
NAN device stopping on nan0
NAN device stopped on nan0
PASS nan_sync_multi_services_2 2.342828 2026-09-29 22:25:28.252933
passed all 1 test case(s)
2026-09-29 22:25:28 ./run-tests.py nan_sync_srf_mac_addr_6
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START nan_sync_srf_mac_addr_6 1/1
Test: NAN synchronized active subscribe and solicited publish with MAC address in SRF
NAN capabilities: USD NAN
NAN device starting on nan0
Setting master_pref to 10 on nan0
Setting dual_band to 0 on nan0
NAN device started on nan0
NAN capabilities: USD NAN
NAN device starting on nan1
Setting master_pref to 10 on nan1
Setting dual_band to 0 on nan1
NAN device started on nan1
Cancelling publish with ID 1 on nan0
Cancelling subscribe with ID 1 on nan1
NAN device stopping on nan1
NAN device stopped on nan1
NAN capabilities: USD NAN
NAN device starting on nan1
Setting master_pref to 10 on nan1
Setting dual_band to 0 on nan1
NAN device started on nan1
Cancelling publish with ID 2 on nan0
Cancelling subscribe with ID 1 on nan1
NAN device stopping on nan1
NAN device stopped on nan1
NAN capabilities: USD NAN
NAN device starting on nan1
Setting master_pref to 10 on nan1
Setting dual_band to 0 on nan1
NAN device started on nan1
Cancelling publish with ID 3 on nan0
Cancelling subscribe with ID 1 on nan1
NAN device stopping on nan1
NAN device stopped on nan1
NAN capabilities: USD NAN
NAN device starting on nan1
Setting master_pref to 10 on nan1
Setting dual_band to 0 on nan1
NAN device started on nan1
Cancelling publish with ID 4 on nan0
Cancelling subscribe with ID 1 on nan1
NAN device stopping on nan1
NAN device stopped on nan1
NAN capabilities: USD NAN
NAN device starting on nan1
Setting master_pref to 10 on nan1
Setting dual_band to 0 on nan1
NAN device started on nan1
Cancelling publish with ID 5 on nan0
Cancelling subscribe with ID 1 on nan1
NAN device stopping on nan1
NAN device stopped on nan1
NAN device stopping on nan0
NAN device stopped on nan0
PASS nan_sync_srf_mac_addr_6 6.988013 2026-09-29 22:25:35.553453
passed all 1 test case(s)
2026-09-29 22:25:35 ./run-tests.py nfc_p2p_responder_go
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START nfc_p2p_responder_go 1/1
Test: NFC connection handover with responder already GO
Start autonomous GO
Perform NFC connection handover
PASS nfc_p2p_responder_go 0.768712 2026-09-29 22:25:36.651118
passed all 1 test case(s)
2026-09-29 22:25:36 ./run-tests.py owe_transition_mode_ifname_acs2
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START owe_transition_mode_ifname_acs2 1/1
Test: Opportunistic Wireless Encryption transition mode (ifname, ACS)
Starting AP wlan3
Starting AP wlan4
Connect STA wlan0 to AP
PASS owe_transition_mode_ifname_acs2 13.181996 2026-09-29 22:25:50.151016
passed all 1 test case(s)
2026-09-29 22:25:50 ./run-tests.py p2p_channel_avoid2
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START p2p_channel_avoid2 1/1
Test: P2P and avoid frequencies driver event on 5 GHz
Exception during test execution: No regdom change event seen
Traceback (most recent call last):
  File "/lkp/benchmarks/hwsim/tests/hwsim/./run-tests.py", line 637, in main
    t(dev)
    ~^^^^^
  File "/lkp/benchmarks/hwsim/tests/hwsim/test_p2p_channel.py", line 198, in test_p2p_channel_avoid2
    set_country("US", dev[0])
    ~~~~~~~~~~~^^^^^^^^^^^^^^
  File "/lkp/benchmarks/hwsim/tests/hwsim/test_p2p_channel.py", line 29, in set_country
    raise Exception("No regdom change event seen")
Exception: No regdom change event seen
FAIL p2p_channel_avoid2 15.509836 2026-09-29 22:26:05.996593
passed 0 test case(s)
skipped 0 test case(s)
failed tests: p2p_channel_avoid2
2026-09-29 22:26:06 ./run-tests.py p2p_device_grpform_timeout_client
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START p2p_device_grpform_timeout_client 1/1
Test: P2P group formation timeout on client with cfg80211 P2P Device
wlan0: Trying to discover peer 42:00:00:00:15:00
wlan7: Trying to discover peer 02:00:00:00:00:00
Remaining interfaces: p2p-dev-wlan7
wlan7

PASS p2p_device_grpform_timeout_client 11.104184 2026-09-29 22:26:17.413201
passed all 1 test case(s)
2026-09-29 22:26:17 ./run-tests.py p2p_device_join
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START p2p_device_join 1/1
Test: P2P join-group using cfg80211 P2P Device
Try to connect the client to the GO
wlan7: Trying to discover peer 02:00:00:00:00:00
Client connected
Terminate persistent group
PASS p2p_device_join 1.543583 2026-09-29 22:26:19.267193
passed all 1 test case(s)
2026-09-29 22:26:19 ./run-tests.py p2p_ext_vendor_elem_pd_req
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START p2p_ext_vendor_elem_pd_req 1/1
Test: VENDOR_ELEM in PD Request frames
wlan0: Trying to discover peer 02:00:00:00:01:00
PASS p2p_ext_vendor_elem_pd_req 0.312183 2026-09-29 22:26:19.895934
passed all 1 test case(s)
2026-09-29 22:26:19 ./run-tests.py pasn_sae_driver_params
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START pasn_sae_driver_params 1/1
Test: PASN authentication using driver event as trigger
Starting AP wlan3
Starting AP wlan4
PASS pasn_sae_driver_params 3.349751 2026-09-29 22:26:23.572510
passed all 1 test case(s)
2026-09-29 22:26:23 ./run-tests.py persistent_group_peer_dropped
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START persistent_group_peer_dropped 1/1
Test: P2P persistent group formation and re-invocation with peer having dropped group
Form a persistent group
Start GO negotiation wlan1 -> wlan0
wlan0: Trying to discover peer 02:00:00:00:01:00
wlan1: Trying to discover peer 02:00:00:00:00:00
Group formed
Terminate persistent group
Re-invoke persistent group from client
wlan1: Trying to discover peer 02:00:00:00:00:00
Terminate persistent group
Remove group on the GO and try to invite from the client
wlan1: Trying to discover peer 02:00:00:00:00:00
Verify that a new group can be formed
Form a persistent group
Start GO negotiation wlan1 -> wlan0
wlan0: Trying to discover peer 02:00:00:00:01:00
wlan1: Trying to discover peer 02:00:00:00:00:00
Group formed
Terminate persistent group
PASS persistent_group_peer_dropped 3.179263 2026-09-29 22:26:27.058211
passed all 1 test case(s)
2026-09-29 22:26:27 ./run-tests.py rrm_beacon_req_active_ap_channels
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START rrm_beacon_req_active_ap_channels 1/1
Test: Beacon request - active scan mode with AP Channel Report subelement
Starting AP wlan3
Starting AP wlan4
Connect STA wlan0 to AP
Received beacon report: opclass=81 channel=1 start=0 duration=100 frame_info=7 rcpi=160 rsni=255 bssid=02:00:00:00:03:00 antenna_id=0 parent_tsf=0 frame_body=77d8c8150000000064000114000372726d010882848b960c1218240301012a010432043048606c460570000000003b0251002d1a0c001bffff0000000000000000000001000000000000000000003d16010000000000000000000000000000000000000000007f080400000200000040dd180050f2020101010003a4000027a4000042435e0062322f00 fragment_id=0100
Received beacon report: opclass=81 channel=11 start=0 duration=100 frame_info=7 rcpi=160 rsni=255 bssid=02:00:00:00:04:00 antenna_id=0 parent_tsf=0 frame_body=ea40cd1500000000640001040007616e6f74686572010882848b960c12182403010b2a010432043048606c3b0251002d1a0c001bffff0000000000000000000001000000000000000000003d160b0000000000000000000000000000000000000000007f080400000200000040dd180050f2020101010003a4000027a4000042435e0062322f00 fragment_id=0100
PASS rrm_beacon_req_active_ap_channels 0.651633 2026-09-29 22:26:28.027128
passed all 1 test case(s)
2026-09-29 22:26:28 ./run-tests.py rsn_eapol_m3_extra_long
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START rsn_eapol_m3_extra_long 1/1
Test: Long extra KDE in EAPOL-Key msg 3/4
Starting AP wlan3
Connect STA wlan0 to AP
PASS rsn_eapol_m3_extra_long 0.399849 2026-09-29 22:26:28.746267
passed all 1 test case(s)
2026-09-29 22:26:28 ./run-tests.py rsn_override_eap_sha256_sp9
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START rsn_override_eap_sha256_sp9 1/1
Test: Three layers: WPA-PSK base, WPA-EAP-SHA256 RSN Override,
SAE-EXT-KEY Security Profile 9 - enterprise override with PSK base.
Starting AP wlan3
Connect STA wlan0 to AP
Connect STA wlan1 to AP
Connect STA wlan2 to AP
PASS rsn_override_eap_sha256_sp9 1.406829 2026-09-29 22:26:30.466681
passed all 1 test case(s)
2026-09-29 22:26:30 ./run-tests.py rsn_override_omit_rsnxe
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START rsn_override_omit_rsnxe 1/1
Test: RSN overriding with RSNXE explicitly omitted
Starting AP wlan3
Connect STA wlan0 to AP
PASS rsn_override_omit_rsnxe 0.470361 2026-09-29 22:26:31.251848
passed all 1 test case(s)
2026-09-29 22:26:31 ./run-tests.py rsn_override_rsnxe_extensibility
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START rsn_override_rsnxe_extensibility 1/1
Test: RSN overriding and RSNXE extensibility
Starting AP wlan3
Connect STA wlan0 to AP
PASS rsn_override_rsnxe_extensibility 0.465084 2026-09-29 22:26:32.039473
passed all 1 test case(s)
2026-09-29 22:26:32 ./run-tests.py sae
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START sae 1/1
Test: SAE with default group
Starting AP wlan3
Connect STA wlan0 to AP
PASS sae 0.452282 2026-09-29 22:26:32.832590
passed all 1 test case(s)
2026-09-29 22:26:32 ./run-tests.py sae_anti_clogging_proto
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START sae_anti_clogging_proto 1/1
Test: SAE anti clogging protocol testing
Starting AP wlan3
Connect STA wlan0 to AP
PASS sae_anti_clogging_proto 0.368557 2026-09-29 22:26:33.515802
passed all 1 test case(s)
2026-09-29 22:26:33 ./run-tests.py sae_connect_cmd
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START sae_connect_cmd 1/1
Test: SAE with connect command
Starting AP wlan3
Connect STA wlan5 to AP
PASS sae_connect_cmd 6.397285 2026-09-29 22:26:40.236611
passed all 1 test case(s)
2026-09-29 22:26:40 ./run-tests.py sae_eapol_key_reserved_random
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START sae_eapol_key_reserved_random 1/1
Test: SAE with EAPOL-Key Reserved field set to random value
Starting AP wlan3
Connect STA wlan0 to AP
PASS sae_eapol_key_reserved_random 0.497259 2026-09-29 22:26:41.056949
passed all 1 test case(s)
2026-09-29 22:26:41 ./run-tests.py sae_h2e_rejected_groups_unexpected
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START sae_h2e_rejected_groups_unexpected 1/1
Test: SAE H2E and rejected groups indication (unexpected group)
Starting AP wlan3
Connect STA wlan0 to AP
PASS sae_h2e_rejected_groups_unexpected 1.973876 2026-09-29 22:26:43.344464
passed all 1 test case(s)
2026-09-29 22:26:43 ./run-tests.py sae_no_random
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START sae_no_random 1/1
Test: SAE and no random numbers available
Starting AP wlan3
Connect STA wlan0 to AP
PASS sae_no_random 0.566474 2026-09-29 22:26:44.229844
passed all 1 test case(s)
2026-09-29 22:26:44 ./run-tests.py sae_okc_pmk_lifetime
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START sae_okc_pmk_lifetime 1/1
Test: SAE and opportunistic key caching and PMK lifetime
Starting AP wlan3
Connect STA wlan0 to AP
Starting AP wlan4
PASS sae_okc_pmk_lifetime 5.978041 2026-09-29 22:26:50.539113
passed all 1 test case(s)
2026-09-29 22:26:50 ./run-tests.py sae_pmksa_caching_reject_deauth
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START sae_pmksa_caching_reject_deauth 1/1
Test: SAE PMKSA caching attempt rejected with Deauthentication frame
Starting AP wlan3
Connect STA wlan0 to AP
PASS sae_pmksa_caching_reject_deauth 2.825857 2026-09-29 22:26:53.680483
passed all 1 test case(s)
2026-09-29 22:26:53 ./run-tests.py security_profile_0_mixed_eppke_sta
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START security_profile_0_mixed_eppke_sta 1/1
Test: Security Profile 0+8 - EPPKE STA connecting to AP with EPPKE base
Starting AP wlan3
Connect STA wlan0 to AP
PASS security_profile_0_mixed_eppke_sta 0.678499 2026-09-29 22:26:54.673317
passed all 1 test case(s)
2026-09-29 22:26:54 ./run-tests.py sigma_dut_ap_ht40plus
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START sigma_dut_ap_ht40plus 1/1
Test: sigma_dut controlled AP and HT40+
Skip test case: sigma_dut not available
SKIP sigma_dut_ap_ht40plus 0.10126 2026-09-29 22:26:55.084475
passed all 0 test case(s)
skipped 1 test case(s)
2026-09-29 22:26:55 ./run-tests.py sigma_dut_ap_owe
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START sigma_dut_ap_owe 1/1
Test: sigma_dut controlled AP with OWE
Skip test case: sigma_dut not available
SKIP sigma_dut_ap_owe 0.104376 2026-09-29 22:26:55.497781
passed all 0 test case(s)
skipped 1 test case(s)
2026-09-29 22:26:55 ./run-tests.py sigma_dut_owe
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START sigma_dut_owe 1/1
Test: sigma_dut controlled OWE station
Skip test case: sigma_dut not available
SKIP sigma_dut_owe 0.057051 2026-09-29 22:26:55.858606
passed all 0 test case(s)
skipped 1 test case(s)
2026-09-29 22:26:55 ./run-tests.py sigma_dut_psk_pmf_bip_gmac_256
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START sigma_dut_psk_pmf_bip_gmac_256 1/1
Test: sigma_dut controlled PSK+PMF association with BIP-GMAC-256
Skip test case: sigma_dut not available
SKIP sigma_dut_psk_pmf_bip_gmac_256 0.057663 2026-09-29 22:26:56.233955
passed all 0 test case(s)
skipped 1 test case(s)
2026-09-29 22:26:56 ./run-tests.py wnm_bss_tm_ap_proto
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START wnm_bss_tm_ap_proto 1/1
Test: WNM BSS TM - protocol testing for AP message parsing
Starting AP wlan3
Connect STA wlan0 to AP
PASS wnm_bss_tm_ap_proto 0.429294 2026-09-29 22:26:56.970272
passed all 1 test case(s)
2026-09-29 22:26:57 ./run-tests.py wnm_bss_tm_global4
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START wnm_bss_tm_global4 1/1
Test: WNM BSS Transition Management (global; indicate table E-4)
Starting AP wlan3
Connect STA wlan0 to AP
Preferred Candidate List (no matching neighbor, known channels)
Preferred Candidate List (no matching neighbor, unknown channels)
Preferred Candidate List (no matching neighbor, unknown channels 2)
Country code at the end: 00
PASS wnm_bss_tm_global4 7.375702 2026-09-29 22:27:04.656994
passed all 1 test case(s)
2026-09-29 22:27:04 ./run-tests.py wpas_config_file_set_cred
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START wpas_config_file_set_cred 1/1
Test: wpa_supplicant config file parsing/writing with arbitrary cred values
Exception during test execution: Failed to add a dynamic wpa_supplicant interface
Traceback (most recent call last):
  File "/lkp/benchmarks/hwsim/tests/hwsim/./run-tests.py", line 633, in main
    t(dev, apdev, params)
    ~^^^^^^^^^^^^^^^^^^^^
  File "/lkp/benchmarks/hwsim/tests/hwsim/test_wpas_config.py", line 482, in test_wpas_config_file_set_cred
    wpas.interface_add("wlan5", config=config)
    ~~~~~~~~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^^^^^
  File "/lkp/benchmarks/hwsim/tests/hwsim/wpasupplicant.py", line 255, in interface_add
    raise Exception("Failed to add a dynamic wpa_supplicant interface")
Exception: Failed to add a dynamic wpa_supplicant interface
FAIL wpas_config_file_set_cred 0.062919 2026-09-29 22:27:05.031010
passed 0 test case(s)
skipped 0 test case(s)
failed tests: wpas_config_file_set_cred
2026-09-29 22:27:05 ./run-tests.py wpas_ctrl_global_bgscan
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START wpas_ctrl_global_bgscan 1/1
Test: wpa_supplicant global bgscan parameter
PASS wpas_ctrl_global_bgscan 0.181147 2026-09-29 22:27:05.522778
passed all 1 test case(s)
2026-09-29 22:27:05 ./run-tests.py wpas_ctrl_network
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START wpas_ctrl_network 1/1
Test: wpa_supplicant ctrl_iface network set/get
PASS wpas_ctrl_network 0.073759 2026-09-29 22:27:05.914480
passed all 1 test case(s)
2026-09-29 22:27:05 ./run-tests.py wpas_ctrl_oom
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START wpas_ctrl_oom 1/1
Test: Various wpa_supplicant ctrl_iface OOM cases
PASS wpas_ctrl_oom 0.08004 2026-09-29 22:27:06.303701
passed all 1 test case(s)
2026-09-29 22:27:06 ./stop.sh